• Home
  • Search
  • Multi-objective optimization and sensitivity analysis of tube hydroforming
  • Cite Icon41
  • https://doi.org/10.1007/s00170-009-2505-xCopy DOI Icon

Multi-objective optimization and sensitivity analysis of tube hydroforming

  • Abstract
  • Literature Map
  • References
  • Citations
  • Similar Papers
Abstract

Tube hydroforming is a manufacturing process used to produce structural components in cars and trucks, and the success of this process largely depends on the careful control of parameters such as internal pressure and end-feed force. The objective of this work was to establish a methodology, and demonstrate its effectiveness, to determine the optimal process parameters for a tube hydroformed in a die with a square cross section. The Taguchi method was used to establish a design of virtual hydroforming experiments, and numerical simulations were carried out with the finite element code LS-DYNA®. A sensitivity analysis was also carried out with analysis of variance. Multi-objective functions that consider necking/fracture, wrinkling, and thinning were formulated, and the response surface methodology was used with the most sensitive factors to obtain a defect-free part. An objective function, based on the final corner radius in the part, was also included in the optimization model. The forming severity of virtual hydroformed parts was evaluated using the forming limit stress diagram and the forming limit (strain) diagram. Finally, the normal-boundary intersection method and the L 2 norm were used to obtain the Pareto-optimal solution set and the optimal solution within this set, respectively. The hydroforming process for this part was also optimized using the commercial optimization software LS-OPT®, with two different single-objective algorithms. However, the optimum load path predicted with the proposed methodology was shown to achieve a smaller corner radius. The proposed optimization technique helped to define a process window that leads to a robust manufacturing process and improved part quality.

Similar Papers
  • Research Article
  • Citations15

A hybrid-constrained MOGA and local search method to optimize the load path for tube hydroforming

  • Oct 12, 2011
  • The International Journal of Advanced Manufacturing Technology
  • Honggang An +2
  • Research Article
  • Citations35

Efficient Implementation of the Normal Boundary Intersection (NBI) Method on Multiobjective Optimization Problems

  • Dec 28, 2000
  • Industrial & Engineering Chemistry Research
  • Young Il Lim +2
  • Research Article
  • Citations77

Multiobjective Stochastic Economic Dispatch With Variable Wind Generation Using Scenario-Based Decomposition and Asynchronous Block Iteration

  • Jan 01, 2016
  • IEEE Transactions on Sustainable Energy
  • Yimu Fu +2
  • Research Article
  • Citations1

An Adaptive Voltage Reference-Based Multi-Objective Optimal Control Method for the Power Flow Symmetry of Multi-Terminal DC Systems with the Large-Scale Integration of Offshore Wind Farms

  • Jan 11, 2025
  • Symmetry
  • Yuanshi Zhang +6
  • Research Article
  • Citations16

A review of emerging hydroforming technologies: design considerations, parametric studies, and recent innovations

  • Oct 30, 2024
  • Journal of Engineering and Applied Science
  • Satish Chinchanikar +4
  • Research Article
  • Citations14

Integration of RSM with Grey based Taguchi Method for optimization of pulsed TIG welding process parameters

  • Jan 01, 2019
  • Materials Today: Proceedings
  • Asif Ahmad +1
  • Conference Article

Multi-Objective Design Optimisation of a Diffuser-Ejector Exhaust Duct for Helicopter Engines

  • Oct 10, 2010
  • J Gra¨Sel +3
  • Research Article

Design and optimization of axial flux permanent magnet motor for mine scraper conveyor

  • Aug 01, 2025
  • Journal of Physics: Conference Series
  • Weiyang Shi +2
  • Research Article
  • Citations30

Normal boundary intersection method based on principal components and Taguchi’s signal-to-noise ratio applied to the multiobjective optimization of 12L14 free machining steel turning process

  • Mar 01, 2016
  • The International Journal of Advanced Manufacturing Technology
  • D M D Costa +3
  • PDF
  • Research Article
  • Citations13

High Performances Design of a Six-Phase Synchronous Reluctance Motor Using Multi-Objective Optimization with Altered Bee Colony Optimization and Taguchi Method

  • Oct 11, 2018
  • Energies
  • Chih-Hong Lin +1
  • Research Article
  • Citations7

Adaptive simulations in T-shape tube hydroforming with different outlet diameters

  • Feb 19, 2014
  • Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
  • Yeong-Maw Hwang +2
  • Research Article

Load path optimization in tube hydroforming

  • Mar 02, 2015
  • Canadian Aeronautics and Space Journal
  • S Mojarad +4
  • Research Article
  • Citations54

Global sensitivity analysis and multi-objective optimisation of loading path in tube hydroforming process based on metamodelling techniques

  • Dec 11, 2013
  • The International Journal of Advanced Manufacturing Technology
  • Anis Ben Abdessalem +1
  • Conference Article
  • Citations19

A roadmap for distribution energy management via multiobjective optimization

  • Jul 01, 2010
  • B R Sathyanarayana +1
  • Research Article
  • Citations83

Multi-objective optimization and decision analysis of a system based on biomass fueled SOFC using couple method of entropy/VIKOR

  • Nov 14, 2019
  • Energy Conversion and Management
  • Parisa Mojaver +2
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.