Multi-objective Variable Weight Combination Forecasting Model Based on pccsAMOPSO

This article devises the Artificial Intelligence (AI) methods of designing models of short-term forecasting (in 12 h and 24 h horizons) of electricity production in a selected Small Hydropower Plant (SHP). Renewable Energy Sources (RESs) are difficult to predict due to weather variability. Electricity production by a run-of-river SHP is marked by the variability related to the access to instantaneous flow in the river and weather conditions. In order to develop predictive models of an SHP facility (installed capacity 760 kW), which is located in Southern Poland on the Skawa River, hourly data from nearby meteorological stations and a water gauge station were collected as explanatory variables. Data on the water management of the retention reservoir above the SHP were also included. The variable to be explained was the hourly electricity production, which was obtained from the tested SHP over a period of 3 years and 10 months. Obtaining these data to build models required contact with state institutions and private entrepreneurs of the SHP. Four AI methods were chosen to create predictive models: two types of Artificial Neural Networks (ANNs), Multilayer Perceptron (MLP) and Radial Base Functions (RBFs), and two types of decision trees methods, Random Forest (RF) and Gradient-Boosted Decision Trees (GBDTs). Finally, after applying forecast quality measures of Mean Absolute Error (MAE), Mean Absolute Percentage Error (MAPE), and Coefficient of Determination (R2), the most effective model was indicated. The decision trees method proved to be more accurate than ANN models. The best GBDT models’ errors were MAPE 3.17% and MAE 9.97 kWh (for 12 h horizon), and MAPE 3.41% and MAE 10.96 kWh (for 24 h horizon). MLPs had worse results: MAPE from 5.41% to 5.55% and MAE from 18.02 kWh to 18.40 kWh (for 12 h horizon), and MAPE from 7.30% to 7.50% and MAE from 24.12 kWh to 24.83 kWh (for 24 h horizon). Forecasts using RBF were not made due to the very low quality of training and testing (the correlation coefficient was approximately 0.3).

Globally, wind energy if properly harnessed, could serve as a source of energy generation in Africa. This study compared the performance of two Machine Learning (ML) algorithms (Linear regression and Random Forest) in predicting wind speed in five major cities in Africa (Yaoundé, Pretoria, Nairobi, Cairo and Abuja). Wind data were collected between January 1, 2000, and December 31, 2022, using the Solar Radiation Data Archive. The data preprocessing was carried out with 80% of the data used for training and 20% for validation. The performance of these ML algorithms was evaluated using Mean Square Error (MSE), Root Mean Square Error (RMSE), Mean Absolute Error (MAE), Mean Absolute Percentage Error (MAPE) and coefficient of determination (R2). The result shows that Nairobi (3.814795 m/s) closely followed by Cairo (3.606453 m/s) has the highest mean wind speed while Yaoundé (1.090512 m/s) has the lowest. Based on the performance metrics used, the two Machine Learning algorithms were competitive. Still, the Linear Regression (LR) algorithm outperformed the Random Forest Algorithm in predicting wind speed in all the selected major African cities. In Yaoundé (RMSE = 0.3892, MAE= 0.3001, MAPE =0.5030), Pretoria (RMSE=1.2339, MAE=0.9480, MAPE=0.7450) Nairobi (RMSE= 0.4223, MAE =0.6499, MAPE =0.1872), Nairobi (RMSE=0.6499, MAE=0.5171, MAPE =0.1872), Cairo (RMSE =1.0909, MAE =0.8544, MAPE =0.3541) and Abuja (RMSE = 0.70245, MAE =0.5441, MAPE= 0.4515) the Linear regression algorithms was found to outperformed Random Forest Regression. Therefore, the Linear regression algorithm is more reliable in predicting wind speed compared with the Random Forest regression.

BackgroundAccurate incidence prediction of sexually transmitted diseases (STDs) is critical for early prevention and better government strategic planning. In this paper, four different forecasting models were presented to predict the incidence of AIDS, gonorrhea, and syphilis.MethodsThe annual percentage changes in the incidence of AIDS, gonorrhea, and syphilis were estimated by using joinpoint regression. The performance of four methods, namely, the autoregressive integrated moving average (ARIMA) model, Elman neural network (ERNN) model, ARIMA-ERNN hybrid model and long short-term memory (LSTM) model, were assessed and compared. For 1-year prediction, the collected data from 2011 to 2020 were used for modeling to predict the incidence in 2021. For 5-year prediction, the collected data from 2011 to 2016 were used for modeling to predict the incidence from 2017 to 2021. The performance was evaluated based on four indices: mean square error (MSE), mean absolute error (MAE), and mean absolute percentage error (MAPE).ResultsThe morbidities of AIDS and syphilis are on the rise, and the morbidity of gonorrhea has declined in recent years. The optimal ARIMA models were determined: ARIMA(2,1,2)(0,1,1)12, ARIMA(1,1,2)(0,1,2)12, and ARIMA(3,1,2)(1,1,2)12 for AIDS, gonorrhea, and syphilis 1-year prediction, respectively; ARIMA (2,1,2)(0,1,1)12, ARIMA(1,1,2)(0,1,2)12, and ARIMA(2,1,1)(0,1,0)12 for AIDS, gonorrhea and syphilis 5-year prediction, respectively. For 1-year prediction, the MAPEs of ARIMA, ERNN, ARIMA-ERNN, and LSTM for AIDS are 23.26, 20.24, 18.34, and 18.63, respectively; For gonorrhea, the MAPEs are 19.44, 18.03, 17.77, and 5.09, respectively; For syphilis, the MAPEs are 9.80, 9.55, 8.67, and 5.79, respectively. For 5-year prediction, the MAPEs of ARIMA, ERNN, ARIMA-ERNN, and LSTM for AIDS are 12.86, 23.54, 14.74, and 25.43, respectively; For gonorrhea, the MAPEs are 17.07, 17.95, 16.46, and 15.13, respectively; For syphilis, the MAPEs are 21.88, 24.00, 20.18 and 11.20, respectively. In general, the performance ranking of the four models from high to low is LSTM, ARIMA-ERNN, ERNN, and ARIMA.ConclusionThe time series predictive models show their powerful performance in forecasting STDs incidence and can be applied by relevant authorities in the prevention and control of STDs.

Milk production in the Andean highlands is variable over space and time. This variability is related to fluctuating environmental factors such as rainfall season which directly influence the availability of livestock feeding resources. The main aim of this study was to develop a time-series model to forecast milk production in a mountainous geographical area by analysing the dynamics of milk records thorough the year. The study was carried out in the Andean highlands, using time–series models of monthly milk records collected routinely from dairy cows maintained in a controlled experimental farm over a 9-year period (2008–2016). Several statistical forecasting models were compared. The Mean Absolute Error (MAE), Root Mean Square Error (RMSE), and Mean Absolute Percent Error (MAPE) were used as selection criteria to compare models. A relation between monthly milk records and the season of the year was modelled using seasonal autoregressive integrated moving average (SARIMA) methods to explore temporal redundancy (trends and periodicity). According to white noise residual test (Q = 13.951 and p = 0.052), Akaike Information Criterion and MAE, MAPE, and RMSE values, the SARIMA (1, 0, 0) x (2, 0, 0)12 time-series model resulted slightly better forecasting model compared to others. In conclusion, time-series models were promising, simple and useful tools for producing reasonably reliable forecasts of milk production thorough the year in the Andean highlands. The forecasting potential of the different models were similar and they could be used indistinctly to forecast the milk production seasonal fluctuations. However, the SARIMA model performed the best good predictive capacity minimizing the prediction interval error. Thus, a useful effective strategy has been developed by using time-series models to monitor milk production and alleviate production drops due to seasonal factors in the Andean highlands.

This article uses machine learning techniques as fuzzy and neuro-fuzzy ANFISs, to develop and compare prediction models capable of relating pregnant women’s exposure to air pollutants, such as Nitrogen Dioxide and Particulate Matter, the mother’s age, and the number of prenatal consultations to the incidence of premature birth. In the current literature, studies can be found that relate prematurity to the exposure of pregnant women to NO2, O3, and PM10; to Toluene and benzene, mainly in the window 5 to 10 days before birth; and to PM10 in the week before birth. Both models used logistic regression to quantify the effects of pollutants as a result of premature birth. Datasets from Brazil—Departamento de Informatica do Sistema Único de Saúde (DATASUS) and Companhia Ambiental do Estado de São Paulo (CETESB)—were used, covering the period from 2016 to 2018 and comprising women living in the city of São José dos Campos (SP), Brazil. In order to evaluate and compare the different techniques used, evaluation metrics were calculated, such as correlation (r), coefficient of determination (R2), Root Mean Square Error (RMSE), Mean Absolute Percentage Error (MAPE), Mean Square Error (MSE), and Mean Absolute Error (MAE). These metrics are widely used in the literature due to their ability to evaluate the robustness and efficiency of prediction models. For the RMSE, MAPE, MSE, and MAE metrics, lower values indicate that prediction errors are smaller, demonstrating better model accuracy and confidence. In the case of (r) and R2, a positive and strong result indicates alignment and better performance between the real and predicted data. The neuro-fuzzy ANFIS model showed superior performance, with a correlation (r) of 0.59, R2 = 0.35, RMSE = 2.83, MAPE = 5.35%, MSE = 8.00, and MAE = 1.70, while the fuzzy model returned results of r = 0.20, R2 = 0.04, RMSE = 3.29, MSE = 10.81, MAPE = 6.67%, and MAE = 2.01. Therefore, the results from the ANFIS neuro-fuzzy system indicate greater prediction capacity and precision in relation to the fuzzy system. This superiority can be explained by integration with neural networks, allowing data learning and, consequently, more efficient modeling. In addition, the findings obtained in this study have potential for the formulation of public health policies aimed at reducing the number of premature births and promoting improvements in maternal and neonatal health.

Abstract: Bismillah Ponsel in Kisaran Kota faces challenges in managing internet voucher stock due to inefficient manual recording and limited active period. To overcome this problem, the application of the Single Moving Average (SMA) forecasting method is proposed to predict stock needs based on historical data. Thus, business owners can manage stock more optimally, avoid shortages or excess inventory, and improve business efficiency and finances. The results of the application of the SMA method show the prediction of voucher stock needs for April and May with fairly good Mean Absolute Percentage Error (MAPE) accuracy. For IM3 vouchers, the stock predictions for each month are 244 and 244.5 (MAPE 8.21%). Axis vouchers as many as 798 (MAPE 5.02%), XL as many as 713 and 724.5 (MAPE 5.02%), Telkomsel as many as 942 and 951 (MAPE 3.23%), Tri as many as 490 and 491 (MAPE 7.94%), and Smartfren as many as 656 and 664 (MAPE 5.38%). With quite high accuracy, the SMA method has proven to be able to predict sales quickly and accurately, help provide stock according to needs, and increase the operational efficiency of Bismillah Ponsel. Keywords: inventory; management; sales; forecasting; single moving average (SMA).Abstrak: Bismillah Ponsel di Kisaran Kota menghadapi tantangan dalam pengelolaan stok voucher internet akibat pencatatan manual yang tidak efisien dan masa aktif terbatas. Untuk mengatasi masalah ini, diusulkan penerapan metode peramalan Single Moving Average (SMA) guna memprediksi kebutuhan stok berdasarkan data historis. Dengan demikian, pemilik usaha dapat mengelola stok lebih optimal, menghindari kekurangan atau kelebihan persediaan, serta meningkatkan efisiensi dan keuangan bisnis.Hasil penerapan metode SMA menunjukkan prediksi kebutuhan stok voucher untuk April dan Mei dengan akurasi Mean Absolute Percentage Error (MAPE) yang cukup baik. Untuk voucher IM3, prediksi stok masing-masing bulan adalah 244 dan 244,5 (MAPE 8,21%). Voucher Axis sebanyak 798 (MAPE 5,02%), XL sebanyak 713 dan 724,5 (MAPE 5,02%), Telkomsel sebanyak 942 dan 951 (MAPE 3,23%), Tri sebanyak 490 dan 491 (MAPE 7,94%), serta Smartfren sebanyak 656 dan 664 (MAPE 5,38%). Dengan akurasi yang cukup tinggi, metode SMA terbukti mampu meramalkan penjualan secara cepat dan akurat, membantu penyediaan stok sesuai kebutuhan, serta meningkatkan efisiensi operasional Bismillah Ponsel.Kata Kunci: manajemen; persediaan; peramalan; penjualan; single moving average (SMA

Energy-saving design is becoming a trending topic and top-priority over the past decades due to high energy costs, limited available resources and growing urban development. Buildings are alluded to as the major contributors of energy consumption and environmental emissions across the globe. This calls for the development of precise forecasting models of energy consumption and carbon emissions. Hence, this research paper harnesses the implementation of several contemporary metaheuristics to accurately project heating and cooling energy (HEN and CEN) in residential buildings. In this respect, black widow optimization, dandelion optimization, dingo optimization, sparrow search, and red-tailed hawk optimization are among the studied metaheuristics in this research study. The prediction accuracies of the developed models are assessed stepping on the measures of i) relative absolute error (RAE), ii) mean absolute error (MAE), iii) mean absolute percentage error (MAPE), iv) root mean squared error (RMSE) and v) Nash-Sutcliffe efficiency (NSE). It is shown that the developed red-tailed hawk optimization-based model succeeded in accomplishing the most precise results of HEN and CEN. In this context, it predicted HEN with RAE (0.201), MAE (1.838), MAPE (7.626%), RMSE (2.826), and NSE (0.921). Besides, it anticipated CEN with RAE (0.234), MAE (2.009), MAPE (7.519%), RMSE (3.246), and NSE (0.883). It can be argued that this research study could benefit architects and designers in creating more energy-efficient buildings at an early stage.

Evaluation of large language models for carbohydrate counting in type 1 diabetes mellitus: a comparative study with patient estimations.

The primary objective of this study is to evaluate the accuracy of different forecasting models for monthly wind farm electricity production. This study compares the effectiveness of three forecasting models: Autoregressive Integrated Moving Average (ARIMA), Seasonal ARIMA (SARIMA), and Support Vector Regression (SVR). This study utilizes data from two wind farms located in Poland—‘Gizałki’ and ‘Łęki Dukielskie’—to exclude the possibility of biased results due to specific characteristics of a single farm and to allow for a more comprehensive comparison of the effectiveness of both time series analysis methods. Model parameterization was optimized through a grid search based on the Mean Absolute Percentage Error (MAPE). The performance of the best models was evaluated using Mean Bias Error (MBE), MAPE, Mean Absolute Error (MAE), and R2Score. For the Gizałki farm, the ARIMA model outperformed SARIMA and SVR, while for the Łęki Dukielskie farm, SARIMA proved to be the most accurate, highlighting the importance of optimizing seasonal parameters. The SVR method demonstrated the lowest effectiveness for both datasets. The results indicate that the ARIMA and SARIMA models are effective for forecasting wind farm energy production. However, their performance is influenced by the specificity of the data and seasonal patterns. The study provides an in-depth analysis of the results and offers suggestions for future research, such as extending the data to include multidimensional time series. Our findings have practical implications for enhancing the accuracy of wind farm energy forecasts, which can significantly improve operational efficiency and planning.

Drought is a complex and frequently occurring natural hazard in many parts of the world. Therefore, accurate drought forecasting is essential to mitigate its adverse impacts. This research has inferred the implication and the appropriateness of the extreme learning machine (ELM) algorithm for drought forecasting. For numerical evaluation, time series data of the Standardized Precipitating Temperature Index (SPTI) are used for nine meteorological stations located in various climatological zones of Pakistan. To assess the performance of ELM, this research includes parallel inferences of multilayer perceptron (MLP) and autoregressive integrated moving average (ARIMA) models. The performance of each model is assessed using root mean square error (RMSE), mean absolute error (MAE), mean absolute percent error (MAPE), Kling‐Gupta efficiency (KGE), Willmott index (WI), and Karl Pearson’s correlation coefficient. Generally, graphical results illustrated an excellent performance of the ELM algorithm over MLP and ARIMA models. For training data of SPTI‐1, ELM’s best performance has observed at Chitral station (RMSE = 0.374, KGE = 0.838, WI = 0.960, MAE = 0.272, MAPE = 259.59, R = 0.93). For SPTI‐1 at Astore station, the numerical results are (RMSE = 0.688, KGE = 0.988, WI = 0.997, MAE = 0.798, MAPE = 247.35). The overall results indicate that the ELM outperformed by producing the smallest RMSE, MAE, and MAPE values and maximum values for KGE, WI, and correlation coefficient values at almost all the selected meteorological stations for (1, 3, 6, 9, and 12) month time scales. In summary, this research endorses the use of ELM for accurate drought forecasting.

Mapping of groundwater salinization and modelling using meta-heuristic algorithms for the coastal aquifer of eastern Saudi Arabia

Repeated time-series cross-validation: A new method to improved COVID-19 forecast accuracy in Malaysia

HMT: Hybrid mechanistic Transformer for bio-fabrication prediction under complex environmental conditions

Road inconsistency may cause dangerous driving experience that leads to carelessness while handling the vehicle. To determine the road inconsistency, development of models which are based on the 85th percentile of speed is adopted. The models which are taken into consideration are other geometric road characteristics such as superelevation, radius of curve, width of curve, tangent length, and road gradient that can help to minimize the risk of accidents at curve. To further analyze the effectiveness of these developed models, validation of the models using new set of data and comparing it with other established models is crucial. The validation process is conducted by calculating the mean squared error (MSE), mean absolute error (MAE), and mean absolute percentage error (MAPE). MSE value will indicate the differences between the empirical results with the predicted results, while MAE calculates the absolute difference between the empirical results and predicted results. MAPE evaluates the percentage errors between the empirical results with the predicted results. Small values of MSE, MAE, and MAPE is a proof that the models can predict good results.

The relationship between weather and acute coronary syndrome (ACS) incidence has been the subject of considerable research, with varying conclusions. Harnessing machine learning techniques, our study explores the relationship between meteorological factors and ACS presentations in the emergency department (ED), offering insights into seasonal variations and inter-day fluctuations to optimize patient care and resource allocation. A retrospective cohort analysis was conducted, encompassing ACS presentations to Dutch EDs from 2010 to 2017. Temporal patterns were analyzed using heat-maps and time series plots. Multivariable linear regression (MLR) and Random Forest (RF) regression models were employed to forecast daily ACS presentations with prediction horizons of one, three, seven, and thirty days. Model performance was assessed using the coefficient of determination (R²), Mean Absolute Error (MAE), and Mean Absolute Percentage Error (MAPE). The study included 214,953 ACS presentations, predominantly unstable angina (UA) (94,272; 44%), non-ST-elevated myocardial infarction (NSTEMI) (78,963; 37%), and ST-elevated myocardial infarction (STEMI) (41,718; 19%). A decline in daily ACS admissions over time was observed, with notable inter-day (estimated median difference: 41 (95%CI = 37–43, p = < 0.001) and seasonal variations (estimated median difference: 9 (95%CI 6–12, p = < 0.001). Both MLR and RF models demonstrated similar predictive capabilities, with MLR slightly outperforming RF. The models showed moderate explanatory power for ACS incidence (adjusted R² = 0.66; MAE (MAPE): 7.8 (11%)), with varying performance across subdiagnoses. Prediction of UA incidence resulted in the best-explained variability (adjusted R² = 0.80; MAE (MAPE): 5.3 (19.1%)), followed by NSTEMI and STEMI diagnoses. All models maintained consistent performance over extended prediction horizons. Our findings indicate that ACS presentation exhibits distinctive seasonal changes and inter-day differences, with marked reductions in incidence during the summer months and a distinct peak prevalence on Mondays. The predictive performance of our model was moderate. Nonetheless, we obtained good explanatory power for UA presentations. Our model emerges as a potentially valuable supplementary tool to enhance ED resource allocation or future predictive models predicting ACS incidence in the ED.