• Home
  • Search
  • Multi-response parametric optimization of squeeze casting process for fabricating Al 6061-SiC composite
  • Cite Icon42
  • https://doi.org/10.1007/s00170-018-03278-6Copy DOI Icon

Multi-response parametric optimization of squeeze casting process for fabricating Al 6061-SiC composite

Show More
  • Abstract
  • Literature Map
  • References
  • Citations
  • Similar Papers
Abstract

The current study aims to investigate the effects of process parameters on mechanical and microstructural characteristics of Al 6061-SiC composite fabricated via squeeze casting. Seventeen experiments in total have been conducted according to Box-Behnken experimental design which contained three process parameters (squeeze pressure, melt temperature, and SiC wt.%) while recording the responses including ultimate tensile strength, hardness, and percentage elongation. ANOVA (analysis of variance) was employed to evaluate the significance and prediction capability of mathematical models developed through regression analysis. The results indicate that squeeze pressure, melt temperature, and SiC wt.% significantly affect the responses whereas ductility is drastically reduced at higher concentrations of SiC reinforcement. SEM micrographs of failed test specimen have been found to be indicative of ductile fracture at higher levels of squeeze pressure and melt temperature. The multi-objective optimization problem has been transformed to an equivalent single-objective problem using grey relation analysis. The desirability analysis revealed optimum setting of process parameters which was confirmed to have improved the ultimate tensile strength by 1.61%, hardness by 1.56%, and percentage elongation by 11.11% as compared to the initial setting.

Similar Papers
  • Research Article
  • Citations21

Investigating the effects of as-casted and in situ heat-treated squeeze casting of Al-3.5 % Cu alloy

  • Aug 23, 2016
  • The International Journal of Advanced Manufacturing Technology
  • Shoaib Sarfraz +4
  • PDF
  • Research Article
  • Citations34

Analysis of Machining Parameters in WEDM of Al/SiCp20 MMC Using Taguchi-Based Grey-Fuzzy Approach

  • Feb 25, 2019
  • Modelling and Simulation in Engineering
  • Mangesh R Phate +2
  • Book Chapter
  • Citations70

Optimization of Squeeze Casting Process Parameters to Investigate the Mechanical Properties of AA6061/Al2O3/SiC Hybrid Metal Matrix Composites by Taguchi and Anova Approach

  • Jul 10, 2019
  • L Natrayan +2
  • Research Article
  • Citations11

Grey-based Taguchi method for optimisation of hot forging of connecting rod

  • Jan 01, 2016
  • International Journal of Manufacturing Research
  • Md Israr Equbal +3
  • PDF
  • Research Article
  • Citations1

Optimization of an Industrial Recycling Line: The Effect of Processing Parameters on Mechanical Properties of Recycled Polyethylene (PE) Blends

  • May 28, 2024
  • Waste
  • Alae Lamtai +4
  • Research Article
  • Citations6

Prediction of tensile strength in squeeze casted hybrid aluminium matrix composites using conventional statistical approach

  • Mar 14, 2021
  • Advances in Materials and Processing Technologies
  • M Arulraj +2
  • Research Article
  • Citations10

Multi Objective Optimization of Hot Machining of 15-5PH Stainless Steel Using Grey Relation Analysis

  • Jan 01, 2014
  • Procedia Materials Science
  • Venkatesh Ganta +1
  • Conference Article
  • Citations3

A study on kerf and material removal rate in wire electricaldischarge machining of Ti-6Al-4V: multi-objectives optimization

  • Aug 01, 2014
  • J B Saedon +4
  • PDF
  • Research Article
  • Citations10

Fabrication of Copper of Harmonic Structure: Mechanical Property-Based Optimization of the Milling Parameters and Fracture Mechanism.

  • Dec 03, 2022
  • Materials
  • Phanumas Sojithamporn +4
  • Research Article
  • Citations11

Multi objective optimisation of SWCNT-based electrical discharge machining process using grey relational and fuzzy logic analysis

  • Jan 01, 2013
  • International Journal of Machining and Machinability of Materials
  • S. Prabhu +1
  • Research Article
  • Citations6

Predictive modeling and statistical analysis of mechanical properties OF heat treated Cu-10 %Ni alloy using response surface methodology

  • Dec 28, 2021
  • Materials Today: Proceedings
  • C.C Nwaeju +2
  • Conference Article
  • Citations4

Optimization of Reaming Process Parameters for Titanium Ti-6Al-4V Alloy Using Grey Relational Analysis

  • Nov 11, 2016
  • Shakeel Ahmed L +1
  • Research Article
  • Citations55

Experimental investigation and optimization of cobalt bonded tungsten carbide composite by hybrid AHP-TOPSIS approach

  • Nov 19, 2018
  • Alexandria Engineering Journal
  • Rahul Nadda +5
  • Research Article
  • Citations27

Evaluating the effects of as-casted and aged overcasting of Al-Al joints

  • Feb 12, 2018
  • The International Journal of Advanced Manufacturing Technology
  • Muhammad Asad Ali +4
  • Book Chapter

A Multiobjective Genetic-Algorithm-Based Optimization of Micro-Electrical Discharge Drilling

  • Jan 01, 2021
  • Deepak Rajendra Unune +1
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.