Multi up gradation model under distributed environment

PurposeThe aim of this paper is to propose a software reliability growth model based on stochastic differential equations for the integration testing phase of distributed development environment.Design/methodology/approachA client/server system (CSS), which is a new development method, has come into existence as a result of the progress of networking technology by UNIX systems. On the other hand, the effective testing method for distributed development environment has only a few presented. The method of software reliability assessment considering the interaction among software components in a distributed one is discussed.FindingsConventional software reliability growth models for system testing phase in distributed development environment have included many unknown parameters. Especially, the effective estimation method in terms of these unknown parameters, which means the proportion of the total testing‐load for the software component, has never been presented. This software reliability growth model can be easily applied in distributed software development, because the model has a simple structure.Practical implicationsThis model is very useful for software developers in terms of practical reliability assessment in the actual distributed development environment.Originality/valueThe method of software reliability assessment considering the interaction among software components in distributed development environment is proposed. Additionally, several numerical examples for the actual data are presented.

With the growth of complexity in the software system, to deliver reliable software products on time becomes a critical issue. Many software reliability growth models (SRGMs) have been proposed in the past three decades. However, most software reliability assessment processes and parameter estimations of models depend on the computations of the general-purposed numerical software. In this paper, we will present a powerful computer-aided reliability assessment tool for software based on object-oriented analysis and design-CARATS. CARATS can use both traditional SRGMs and neural-network methods to assess software reliability. This would greatly help project managers to make decisions during software development life cycle. Due to the characteristics of the special-purposed and object-oriented design, CARATS can analyze the software reliability easily, and is also more flexible to adopt different SRGMs than other existing software reliability analysis tools.

Software failure-occurrence or the fault-detection phenomenon is changed notably in an actual testing phase or an operational phase due to the changes of factors influencing the software reliability growth process. Taking into consideration of the effect of the change in software reliability growth modeling is expected to conduct more accurate software reliability assessment because it is said that such approach enables us to conduct more plausible software reliability assessment reflecting an actual testing-environment. We develop a framework for developing software hazard rate models with effect of change-point, and discuss change-point detection methods for applying our model to quantitative software reliability assessment. Additionally, we discuss an optimal software release problem for estimating optimal shipping time with the effect of the change as one of the application problems of our model in software project management. Finally, we show numerical examples for software reliability assessment and our optimal software release policy based on our change-point model by using actual data.

A large number of software reliability growth models (SRGMs) have been proposed during the past 30 years to estimate software reliability measures such as the number of remaining faults, software failure rate, and software reliability. Selection of an optimal SRGM for use in a particular case has been an area of interest for researchers in the field of software reliability. Tools and techniques for software reliability model selection found in the literature cannot be used with high confidence as they use a limited number of model selection criteria. For the first time, we developed a deterministic quantitative model based on a distance based approach (DBA) method, then applied it for evaluation, optimal selection, and ranking of SRGMs. DBA recognizes the need for relative importance of criteria for a given application, without which inter-criterion comparison could not be accomplished. It requires a set of model selection criteria, along with a set of SRGMs, and their level of criteria for optimal selection; and it successfully presents the results in terms of a merit value which is used to rank the SRGMs. We use two distinct, real data sets for demonstration of the DBA method. The result of this study will be a ranking of SRGMs based on the Euclidean composite distance of each alternative to the designated optimal SRGM.

Many software reliability growth models have been proposed in the past decade. Those models tacitly assume that testing-effort expenditures are constant throughout software testing. This paper develops realistic software reliability growth models incorporating the effect of testing-effort. The software error detection phenomenon in software testing is modeled by a nonhomogeneous Poisson process. The software reliability assessment measures and the estimation methods of parameters are investigated. Testing-effort expenditures are described by exponential and Rayleigh curves. Least-squares estimators and maximum likelihood estimators are used for the reliability growth parameters. The software reliability data analyses use actual data. The software reliability growth models with testing-effort can consider the relationship between the software reliability growth and the effect of testing-effort. Thus, the proposed models will enable us to evaluate software reliability more realistically.

In order to overcome the limitations of debugging process, insufficient consideration of imperfect debugging and testing-effort (TE) in software reliability modeling and analysis, a software reliability growth model (SRGM) explicitly incorporating imperfect debugging and TE is developed. From the point of view of incomplete debugging and introduction of new fault, software testing process is described and a relatively unified SRGM framework is presented considering TE. The proposed framework models are fairly general models that cover a variety of the previous works on SRGM with ID and TE. Furthermore, a special SRGM incorporating an improved Logistic testing-effort function (TEF) into imperfect debugging modeling is proposed. The effectiveness and reasonableness of the proposed model are verified by published failure data set. The proposed model closer to real software testing has better descriptive and predictive power than other models

Over the past 30 years, many software reliability growth models (SRGMs) have been proposed for estimation of reliability growth of software. In fact, effective debugging will not be easy because the fault may not be immediately obvious. In the past, some researchers ever used an infinite server queueing (ISQ) model to describe the software debugging behavior. An infinite-server queueing model is considered where access of customers to service is controlled by a gate and the gate is open only if all servers are free. However, the finite server queueing (FSQ) model is first advantageously modeled as an infinite-server system. Thus, in this paper, we will show how to incorporate both FSQ and ISQ models into software reliability estimation and prediction. In addition, here we also consider the factor of perfect/imperfect debugging. Experimental results show that the proposed framework to incorporate both fault detection and correction processes for SRGM has a fairly accurate prediction capability.

In order to incorporate the effect of test coverage, two novel software reliability growth models (SRGMs) are proposed in this paper using failure data and test coverage simultaneously. One is continuous using testing time, and the other is discrete with respect to the number of executed test cases instead of testing time. Since one of the most important factors of the coverage-based SRGMs is the test coverage function (TCF), we first discuss a discrete TCF based on Beta function. Then we develop mean value functions (MVF) of the two models integrating test coverage and imperfect debugging. Finally the proposed TCF and MVFs are evaluated and validated on actual software reliability data collected from real software development projects. The results demonstrate clearly that both the proposed TCF and SRGMs provide better estimation and fitting for the data sets under comparisons.

It is one of the important issues in modern software development to make a highly reliable software system by efficient and economical testing. As one of these solutions, many companies have taken in testing-progress management and quality/reliability assessment based on software reliability growth models. Consequently, many software reliability growth models reflecting various development factors and operational environment of the software system have been proposed. Most of these models have assumed the software system as one domain. That is, the models have assumed that the set of the testing-paths influenced by execution of test-cases is extended with testing-progress and it expands to whole software system finally. However, a software system has the structure that the main-component calls plural sub-components ordinarily. Therefore, unless the main-component is tested, the sub-component called from it is not tested. In this chapter, we propose software reliability growth models based on such components' characteristics. Especially, these models reflecting the different testing-environment for composed components are formulated by nonhomogeneous Poisson processes. Furthermore, using fault-detection data observed in actual development projects, we show numerical examples of software reliability assessment and results of goodness-of-fit comparisons with existing software reliability growth models.

Software reliability assessment for an exponential-S-shaped reliability growth phenomenon

Reliability is the one of the important quality measure of software product. Testing is one important phase in software development life cycle whose intention is to find the bugs present in the software product. A mathematical model which describes the software testing in software development cycle termed as software reliability growth models. Past few decades many software reliability growth models were proposed. Estimating the accurate release time of software is an important challenging issue of software Development Company. If the software product is released early contain more errors makes software to be less reliable, where as late release will increase the development cost. It is observed that more than half of the total development cost is concentrated during the maintenance phase. Estimating the reliability and accurate development cost of software product by software reliability growth model at maintenance phase is an important issue. Warranty is defined to be an agreement between the customer and vendor of the software to provide the extra protection to the product. Several papers have concentrated on optimal release time by considering the warranty cost. All early proposed NHPP warranty cost models considered a perfect-debugging software reliability growth model while estimating the software maintenance cost. But it was observed that, the software product is influenced by several factors like environment, resources and nature of the faults during the operational phase. In such circumstances it is quite not right to consider a perfect NHPP software reliability growth model in operational phase. In this paper we proposed an imperfect debugging software reliability growth model by combining the cost and reliability at a given warranty period to estimate the optimal release time of software product.

Over the past three decades, many software reliability growth models (SRGMs) were proposed and they are aimed at predicting and estimating software reliability. One common assumption of these conventional SRGMs is that detected faults will be removed immediately. In reality, this assumption may not be reasonable and may not always occur. Developers need time to identify the root causes of detected faults and then fix them. Besides, during debugging the fault correction rate may not be a constant and could be changed at some certain points as time proceeds. Consequently, in this paper, we will explore and study how to apply queueing model to investigate the fault correction process during software development. We propose an extended infinite server queueing model with multiple change-points to predict and assess software reliability. Experimental results based on real failure data show that proposed model can depicts the change of fault correction rates and predict the behavior of software development more accurately than traditional SRGMs.

Software reliability has been considered as a crucial parameter in the measurement of software quality. In the present scenario, software companies try to develop high reliable software to sustain in the competitive market environment. Reliability may be defined in terms of software ability up to which it can perform its desired functions without any failure. Many software reliability growth models (SRGMs) have been provided by the researchers with a sole motive of reliability measurement. The high availability of these models raises a question that “Is each model is fit to each type of dataset?” To answer this question, a comprehensive analysis of SRGMs is highly required. The present study highlights the various concepts about the SRGMs so that they can be used more efficiently to measure the software reliability.

Software reliability assessment models based on cumulative bernoulli trial processes

In this chapter we discuss the software reliability growth models (SRGMs) that describe the relationship between the number of faults removed and the number of test cases used. Firstly we describe the discrete exponential and S-shaped models in a perfect debugging environment. We also discuss flexible discrete SRGM, which can depict either exponential or S-shaped growth curves, depending upon the parameter values estimated from the past failure data. Further, we describe an SRGM for the fault removal phenomenon in a perfect debugging environment. Most testing processes are imperfect in practice, therefore we also discuss a discrete model that incorporates the impact of imperfect debugging and fault generation into software reliability growth modeling. Faults in the software are generally not of the same type, rather the faults contained in a large software may differ from each other in terms of the amount of time and skill of the removal team required to remove them. Three discrete models: the generalized Erlang model, modeling severity of faults with respect to testing time, and a model with faults of different severity incorporating logistic learning function have been discussed. A discrete model in a distributed environment is also discussed. The above discrete SRGMs assume a constant fault detection rate while testing the software under consideration. In practice, however, the fault detection rate varies because of changes in the testing skill, the system environment, and the testing strategy used to test the software. SRGMs for the fault removal phenomenon, the generalized Erlang model, and the generalized Erlang model with logistic function are discussed, incorporating the concept of change point. It is also shown how equivalent continuous models can be derived. This chapter describes the state-of-the-art in discrete modeling.