Multimachine Collaborative Path Planning Method Based on A* Mechanism Connection Depth Neural Network Model

In this paper, we propose a novel deep reinforcement learning (DRL) method for optimal path planning for mobile robots using dynamic programming (DP)-based data collection. The proposed method can overcome the slow learning process and improve training data quality inherently in DRL algorithms. The main idea of our approach is as follows. First, we mapped the dynamic programming method to typical optimal path planning problems for mobile robots, and created a new efficient DP-based method to find an exact, analytical, optimal solution for the path planning problem. Then, we used high-quality training data gathered using the DP method for DRL, which greatly improves training data quality and learning efficiency. Next, we established a two-stage reinforcement learning method where, prior to the DRL, we employed extreme learning machines (ELM) to initialize the parameters of actor and critic neural networks to a near-optimal solution in order to significantly improve the learning performance. Finally, we illustrated our method using some typical path planning tasks. The experimental results show that our DRL method can converge much easier and faster than other methods. The resulting action neural network is able to successfully guide robots from any start position in the environment to the goal position while following the optimal path and avoiding collision with obstacles.

Path planning refers to that the mobile robot can obtain the surrounding environment information and its own state information through the sensor carried by itself, which can avoid obstacles and move towards the target point. Deep reinforcement learning consists of two parts: reinforcement learning and deep learning, mainly used to deal with perception and decision-making problems, has become an important research branch in the field of artificial intelligence. This paper first introduces the basic knowledge of deep learning and reinforcement learning. Then, the research status of deep reinforcement learning algorithm based on value function and strategy gradient in path planning is described, and the application research of deep reinforcement learning in computer game, video game and autonomous navigation is described. Finally, I made a brief summary and outlook on the algorithms and applications of deep reinforcement learning.

This paper presents a survey of the most recent literature developments in the field of computational guidance and control for space applications. In recent years, the space sector has changed significantly, shifting towards solutions requiring increased performance and autonomy. This change has also been accelerated by the technical and economic needs of the new space approach. However, traditional guidance and control techniques cannot always meet the increasing requirements of autonomy and performance. For this reason, computational guidance and control has become of increasing interest to the aerospace sector. In contrast to traditional guidance and control, computational guidance and control generates commands in real time by using on-board numerical computation. It represents, therefore, a fundamental step on the way to system autonomy and autonomous operations, with the potential to increase system capabilities and reduce operational costs. On-board computation introduces, however, a series of challenges, including the need to develop algorithms which are computationally efficient, reliable and robust. The literature has classified computational guidance and control techniques into two major categories, namely model-based and data-based. The model-based category encompasses all techniques in which the guidance and control laws are explicitly related to the system dynamic and kinematic models. On the contrary, data-based techniques infer guidance and control laws from a set of data, derived from the models, but do not explicitly use such models in the algorithm itself. Model-based guidance and control includes optimal control, model predictive control and convex optimisation. For the specific case of space attitude re-orientation manoeuvres, additional techniques are path planning and artificial potential functions. The general concept behind the Model Predictive Control (MPC) framework is to solve an optimal control problem repeatedly, for example whenever new measurements are available. The MPC implements only the first element of the returned solution, and the process is then repeated. By doing so, the system is better able to cope autonomously with model uncertainties, failures, or errors. For spacecraft with limited on-board capability, having to repeatedly solve an optimisation problem on-board could represent a challenge. In this case, explicit implementations of the MPC have been proposed, in which the guidance and control laws are precomputed offline and implemented on-board using look-up tables or simple functions. If the optimal control problem of the MPC is convex, or if it can be convexified, convex optimisation can be used directly. If the problem cannot be convexified, the solution can be found by sequentially solving a convex approximation of the original non-convex problem. Convex optimisation can be used either repeatedly in the context of an MPC framework, or as a single function call to generate guidance and control laws, e.g. at the beginning of an attitude re-orientation manoeuvre. Convex optimisation has received increased attention in recent years, also due to its suitability to on-board implementation. In fact, if the optimal control problem is convex, it can be solved reliably and efficiently on-board. Convex optimisation has been successfully applied to the space sector with the notable examples of the SpaceX rocket booster landing and of the Mars pinpoint landing demonstration aboard the Masten Xombie sounding rocket. Model-based guidance techniques, not based on optimisation, have been increasingly explored in recent years, as guidance strategies employed in other engineering fields, such as robotics, are being applied to spacecraft. Among these strategies, of particular importance are path planning and artificial potential field methods, due to their applicability to spacecraft autonomous attitude manoeuvres. Path planning algorithms have been applied for decades to ground vehicles and robotic manipulators. These algorithms consist of techniques to find the best route between two points of a graph representing the search space of a problem. For spacecraft re-orientation applications, the literature has proposed different attitude representation conventions and various cost functions associated to the graph search algorithm. Each approach comes with advantages and disadvantages, which will be analysed in the paper. Along with path planning, Artificial Potential Function (APF) techniques have been developed in the field of robotics, and are now also considered for space applications, to track or maintain a specific reference under a set of constraints. The main idea behind these methods is to synthetise the controller using a potential function. This function is specifically built to grant asymptotic stability to the system, according to Lyapunov’s second stability theorem. This formulation grants flexibility to accommodate system constraints, in a computationally light-weight and efficient manner. Data-based guidance and control laws are mainly based on Artificial Intelligence (AI) technologies, and generate guidance commands after training an algorithm with a large set of data. The interest of the space sector towards AI has accelerated in the last years due to the greater maturity of the technology. Some of the most powerful examples lie in the area of machine learning, like reinforcement learning, supervised learning and deep learning. These algorithms are used to extract patterns from large amounts of data derived from complex nonlinear dynamical and kinematical models. Examples of such data can be numerical solutions of an optimal control problem. The patterns extracted from the data allow the system to identify, in a short computational time, the critical parameters needed to relate the state and control variables. Creating a sufficiently large dataset for training the algorithm requires a considerable computational effort, though, and for certain methods optimality cannot be guaranteed due to the lack of theoretical support derived from the optimality conditions. Advancements made in the last years span several research directions and open a wide variety of opportunities and challenges, which need to be examined to guide further exploration. In this paper, both model-based and data-based techniques and applications are presented. The considered techniques include model predictive control, convex optimisation and machine learning. In addition, for the implementation of autonomous attitude manoeuvres, path planning methods and artificial potential function methods are analysed. These techniques have been applied, in the literature, to a range of different applications. The applications discussed in this paper include, in addition to attitude manoeuvres, powered descent landing guidance, low-thrust orbital transfers, proximity operations and station keeping.

In this paper, path planning and sorting of packages for Omnidirectional-Wheel conveyor are presented using Reinforcement Learning (RL). Q-learning, Double Q-learning, Deep Q-learning, and the Double Deep Q-learning algorithms are investigated. The RL algorithms enable the conveyor to self-learn the packages path and sort them without using conventional control or path planning theories. The RL algorithms are used for two different case studies on conveyors structures with different numbers of cells to compare and evaluate their performances in large- and small-scale sized structures. To explore the proposed methods response to external environment effects, two types of collisions between multiple packages were considered, the proposed RL algorithms showed their ability to resolve both types successfully. Comparative study between multiple RL algorithms for path planning showed that the Q-learning and Double Q-learning algorithms had outperformed their Deep learning versions for path planning in the two case studies. Furthermore, the proposed RL methods are compared experimentally to classic control and path planning theories using a hardware prototype for one of the presented case studies. The hardware experimental results showed that the proposed RL methods were as successful as the conventional methods in path planning and sorting in much less processing time. Two types of sorting scenarios (Type I and II) were tested for same package type and for multiple ones. For Type I sorting the Q-learning algorithm performed better than the Q-learning with weights approach, achieving better mean and minimum rewards while maximum rewards remain the same for both techniques. As for Type II sorting, only the Q-learning with weights approach was able to achieve it and converge in a reasonable time.

Reinforcement learning (RL), a promising framework for data-driven decision making in an uncertain environment, has successfully been applied in many real-world operation and control problems. However, the application of RL in a large-scale decentralized multi-agent environment remains a challenging problem due to the partial observability and limited communications between agents. In this paper, we develop a model-based kernel RL approach and a model-free deep RL approach for learning a decentralized, shared policy among homogeneous agents. By leveraging the strengths of both these methods, we further propose a novel deep ensemble multi-agent reinforcement learning (MARL) method that efficiently learns to arbitrate between the decisions of the local kernel-based RL model and the wider-reaching deep RL model. We validate the proposed deep ensemble method on a highly challenging real-world air traffic control problem, where the goal is to provide effective guidance to aircraft to avoid air traffic congestion, conflicting situations, and to improve arrival timeliness, by dynamically recommending adjustments of aircraft speeds in real-time. Extensive empirical results from an open-source air traffic management simulation model, developed by Eurocontrol and built on a real-world data set including thousands of aircrafts, demonstrate that our proposed deep ensemble MARL method significantly outperforms three state-of-the-art benchmark approaches.

Infrastructure‐to‐infrastructure (I2I) communication enables the exchange of traffic data between intersections, which brings a new challenge to urban traffic control. This paper proposes a novel deep reinforcement learning (DRL) framework for urban traffic signal control within the vehicle‐to‐everything (V2X) ecosystem. The framework incorporates a joint‐state representation integrating traffic data from both I2I and vehicle‐to‐infrastructure (V2I) communications, while considering communication range effects. The reward function is designed to optimize both local intersection conditions and global network performance, facilitating adaptive signal coordination. A simulation case study in Huzhou, China, evaluates the proposed model against conventional pretimed, actuated, nonjoint‐state DRL, and joint‐state reinforcement learning (RL) models. Results demonstrate superior performance of the joint‐state DRL model in episode rewards, average speed, and average time loss, particularly during peak traffic periods. To address data limitations, Monte Carlo cross‐validation (MCCV) is employed, further validating the model’s robustness. Results show consistent performance advantages in average speed and time loss across peak and off‐peak periods, with slight variations compared to joint‐state RL models in certain intervals. The impacts of the communication range are also discussed with the proposed model. Pearson correlation analysis reveals a strong positive correlation between the communication range and convergence time across all traffic periods. Meanwhile, correlations between the communication range and reward, average speed, and average time loss vary by traffic period. Findings highlight the transformative potential of integrating DRL with V2X communication technologies for enhancing traffic signal control in complex urban environments. The proposed model offers a flexible, adaptive approach to traffic management, optimizing flow while maintaining safety standards, with implications for future smart city developments.

Traditional unmanned aerial vehicle path planning methods focus on addressing planning issues in static scenes, struggle to balance optimality and real-time performance, and are prone to local optima. In this paper, we propose an improved deep reinforcement learning approach for UAV path planning in dynamic scenarios. Firstly, we establish a task scenario including an obstacle assessment model and model the UAV’s path planning problem using the Markov Decision Process. We translate the MDP model into the framework of reinforcement learning and design the state space, action space, and reward function while incorporating heuristic rules into the action exploration policy. Secondly, we utilize the Q function approximation of an enhanced D3QN with a prioritized experience replay mechanism and design the algorithm’s network structure based on the TensorFlow framework. Through extensive training, we obtain reinforcement learning path planning policies for both static and dynamic scenes and innovatively employ a visualized action field to analyze their planning effectiveness. Simulations demonstrate that the proposed algorithm can accomplish UAV dynamic scene path planning tasks and outperforms classical methods such as A*, RRT, and DQN in terms of planning effectiveness.

Cooperative robots became a very important research topic due to their capability to accomplish tasks fast and more efficiently. In order for cooperative robots to accomplish their tasks, they need to be able to plan their paths in the environment without any collision. Path planning for cooperative robots with deep reinforcement learning is a new research topic in robotics and artificial intelligence. Path planning via deep reinforcement learning is an end to end method. The robot directly receives the data from the sensor (usually high dimensional images) and generates an optimal policy that plans a safe path to the target. In this paper, we first present an overview of reinforcement learning, deep learning, and deep reinforcement learning. Then, we introduce methods used for path planning. Finally, we discuss the challenges of deep reinforcement learning path planning for cooperative robots.

Energy efficient task scheduling based on deep reinforcement learning in cloud environment: A specialized review

Mobile Additive Manufacturing (MAM) systems are transforming large-scale fabrication across various industries, particularly in building and construction. This review explores recent advancements and ongoing challenges in deploying mobile robots within dynamic additive manufacturing (AM) environments. A primary focus is placed on mobile robots' path planning and real-time navigation methods, identified as critical knowledge gaps that impact the accuracy of printing trajectories. AI-driven techniques, such as deep learning and reinforcement learning, are presented as promising solutions to these challenges, offering improvements in trajectory optimisation, obstacle avoidance, and multi-robot cooperation. However, significant obstacles remain, particularly in scaling up MAM operations while maintaining both precision and efficiency. This review provides analysis of the current state of mobile robotic AM, outlines potential pathways for future research, and underscores the alignment of these technologies with Industry 4.0 objectives, emphasising the ongoing need for innovation to unlock the full potential of mobile robotics in large-scale manufacturing.

With the rapid development of AI technology, personalized learning path planning is becoming an important research field. Dual system teaching models have great influence on the learning effect of students. Therefore, how to optimize the learning process of students through the personalized learning path is a great challenge. A Deep Reinforcement Learning (DRL) algorithm for personalized learning path planning is proposed. Based on deep Q-networks and reinforcement learning feedback mechanisms, the algorithm achieves adaptive optimization. The experimental results show that the algorithm based on the DRL is superior to the traditional method in learning performance, learning efficiency and satisfaction. Compared with traditional path planning algorithms based on rules and collaborative filtering, the proposed algorithm improves learning performance by 20%. Moreover, it has obvious advantages in learning motivation and efficiency. This paper provides a new way of thinking to intelligent education system, especially dual-system teaching model, and it is of great practical significance.

Learning ability is the basic characteristic of human intelligence. The July 1, 2005 issue of Science published a list of 125 important questions in science. Among them, the question 94 “What are the limits of learning by machines?”. The annotation “Computers can already beat the world’s best chess players, and they have a wealth of information on the Web to draw on. But abstract reasoning is still beyond any machine”. In recent artificial intelligence has made great progresses. In 1997, the rise of the man-machine war, IBM Supercomputer Deep Blue defeated the chess master Garry Kasparov. On February 14, 2011, IBM’s Watson supercomputer won a practice round against Jeopardy champions Ken Jennings and Brad Rutter. In March 2016, Google DeepMind’s AlphaGo sealed a 4-1 victory over a South Korean Go grandmaster Lee Se-dol. This paper focuses on the machine learning methods of AlphaGo, including reinforcement learning, deep learning, deep reinforcement learning, analysis of the existing problems and the latest research progress. Deep reinforcement learning is the combination of deep learning and reinforcement learning, which can realize the learning algorithm from the perception to action. Simply said, this is the same as human behavior, input sensing information such as vision, and then, direct output action through the deep neural network. Deep reinforcement learning has the potential to learn a variety of skills for the robot to achieve full autonomy. Even though reinforcement learning is practiced successfully, but feature states need to manually set, for complex scene is a difficult thing, especially easy to cause the dimension disaster, and expression is not good. In 2010, Sascha Lange and Martin Riedmiller proposed deep auto-encoder neural networks in reinforcement learning to extract feature, which is used to control the visual correlation. In 2013, DeepMind proposed deep Q-network (DQN) in NIPS 2013, using convolution neural network to extract features, and then applied in reinforcement learning. They continue to improve and published an improved version of DQN on Nature in 2015, which has aroused widespread concern. In order to break through the limits of learning by machines, cognitive machine learning is proposed, which is the combination of machine learning and brain cognition, so that the machine intelligence is constantly evolving, and gradually reaches the human level of artificial intelligence. A cognitive model entitled Consciousness And Memory (CAM) is proposed by author, which consists of memory, consciousness, high-level cognitive functions, perception and motor. High-level cognitive functions of the brain include learning, language, thinking, decision making, emotion, and so on. Learning is a course to accept the stimulus through the nervous system and obtain new behavior, habits and accumulation experience. According to the current research progress of brain science and cognitive science, cognitive machine learning may be interested in learning emergence, procedural memory knowledge learning, learning evolution and so on. For intelligence, so-called evolution is refers to the learning of learning and the structure also follows the change. It is important to record the learning result by structure changing and improve the learning method.

The path planning of Unmanned Aerial Vehicle (UAV) is a critical component of rescue operation. As impacted by the continuity of the task space and the high dynamics of the aircraft, conventional approaches cannot find the optimal control strategy. Accordingly, in this study, a deep reinforcement learning (DRL)-based UAV path planning method is proposed, enabling the UAV to complete the path planning in a 3D continuous environment. The deep deterministic policy gradient (DDPG) algorithm is employed to enable UAV to autonomously make decisions. Besides, to avoid obstacles, the concepts of connected area and threat function are proposed and adopted in the reward shaping. Lastly, an environment with static obstacles is built, and the agent is trained using the proposed method. As has been proved by the experiments, the proposed algorithm can fit a range of scenarios.

This article focuses on achieving efficient and safe navigation for robots in dynamic and unpredictable environments. We propose a hierarchical path planning framework that integrates global path planning with local dynamic obstacle avoidance. This framework aims to quickly plan a collision-free, shortest, and safest path for the robot while adapting the navigation path according to uncertainties in the operating environment. Global path planning is conducted using the improved gray wolf optimization algorithm (IGWO), trajectory tracking is achieved through a pure pursuit control algorithm, and a dynamic switching mechanism based on deep reinforcement learning (DRL) significantly enhances the navigation performance of the robotic system. The effectiveness of this approach has been verified through simulations and experiments. Simulation results indicate that in global path planning, the IGWO algorithm achieves faster convergence compared to algorithms, such as GWO-MP and GWO-CS. The planned path lengths are reduced by approximately 4.01% and 2.27%, respectively, and the fitness values are decreased by 4.78% and 1.9%, demonstrating superior path planning performance. For local dynamic obstacle avoidance, both single-robot and multirobot systems successfully avoided obstacles in multiple experiments. Finally, physical experiments conducted in various complex scenarios show that both single-robot and multirobot systems can effectively execute global planning and respond to unexpected obstacles. These results further demonstrate the method’s wide applicability and robust performance across diverse complex environments.

Path planning of stratospheric airship in dynamic wind field based on deep reinforcement learning