Mutation analysis models for visual servoing in nanomanipulations

This paper aims to develop a visual servo control of a robotic manipulator for cherry tomato harvesting. In the robotic manipulator, an RGB-depth camera was mounted to the end effector to acquire the poses of the target cherry tomatoes in space. The eye-in-hand-based visual servo controller guides the end effector to implement eye–hand coordination to harvest the target cherry tomatoes, in which a hybrid visual servo control method (HVSC) with the fuzzy dynamic control parameters was proposed by combining position-based visual servo (PBVS) control and image-based visual servo (IBVS) control for the tradeoff of both performances. In addition, a novel cutting and clipping integrated mechanism was designed to pick the target cherry tomatoes. The proposed tomato-harvesting robotic manipulator with HVSC was validated and evaluated in a laboratory testbed based on harvesting implementation. The results show that the developed robotic manipulator using HVSC has an average harvesting time of 9.40 s/per and an average harvesting success rate of 96.25% in picking cherry tomatoes.

The use of unmanned aerial vehicles (UAVs) for military, scientific, and civilian sectors are increasing drastically in recent years. This study presents algorithms for the visual-servo control of an UAV, in which a quadrotor helicopter has been stabilized with visual information through the control loop. Unlike previous study that use pose estimation approach which is time consuming and subject to various errors, the visual-servo control is more reliable and fast. The method requires a camera on-board the vehicle, which is already available on various UAV systems. The UAV with a camera behaves like an eye-in-hand visual servoing system. In this study the controller was designed by using two different approaches; image based visual servo control method and hybrid visual servo control method. Various simulations are developed on Matlab, in which the quadrotor aerial vehicle has been visual-servo controlled. In order to show the effectiveness of the algorithms, experiments were performed on a model quadrotor UAV, which suggest successful performance.

With the growing interest of integrating robotics into everyday life and industry, the requirements towards the quality and quantity of applications grows equally hard. This trend is profoundly recognized in applications involving visual perception. Whereas visual sensing in home environments tend to be mainly used for recognition and localization, safety becomes the driving factor for developing intelligent visual control algorithms. More specifically, a robot operating in a human environment should not collide with obstacles and executed motion should be as smooth as possible. Furthermore, as the environment is not known on beforehand, a high demand on the robustness of visual processing is a necessity. On the other hand, in an industrial setting, the environment is known on beforehand and safety is mainly guaranteed by excluding a human operator. Despite these reasons, and the fact that visual servoing has gained much attention from industry to become a standard solution for robotic automation tasks, applications are highly simplified. For example, methods such as visual fault detection are already a mature technique in industrial manufacturing, where a fixed camera observes a product (e.g., on a conveyor belt) and checks whether it meets certain requirements. These operations can be executed at a fairly high rate due to the simplicity of the system (e.g., static camera) and the simplification of the processing task (e.g., binary images). For both areas the identified difficulties are similar. Foremost, this is the slow nature of (robust) visual processing, in respect to the ever growing demand of increasing speed and reducing delay. These two application areas with analogous limitations motivate the design of more direct approaches of vision in visual control systems. Therefore, in order to meet the requirements for next generation visual control systems, this thesis presents approaches which employ visual measurements as a direct feedback to design constrained motion. First, for industrial robotics, in order to obtain the required positioning accuracy, the measurement and fixation system have to be highly rigid and welldesigned, implying high cost and long design time. By measuring the position of objects directly with a camera, instead of indirectly by motor encoders, the requirements of the measurement and fixation system are less demanding. Moreover, this motivates the miniaturization of the complete control system. The approach is validated in experiments on a simplified 2D planar stage (i.e., considerable friction, poor fixation), which attains similar performance compared to encoder-based positioning systems. Secondly, in a human-centred environment, this direct sensing can improve traditional visual control systems, when subject to certain disturbances. More specifically, a method is proposed that uses an image-based feedforward controller on top of traditional position-based visual servo control to overcome disturbances such as friction or poorly designed local motor controllers. This visual feedforward control action is only active when an image-based error is present and vanishes when that error goes to zero. The method is validated on an anthropomorphic robotic manipulator with 7 degrees of freedom, intended for operation in the human care environment. Third, sensing the product directly gives rise to designing motion directly. Whereas in traditional approaches the motion trajectory is designed offline and can not be changed at runtime, direct trajectory generation computes the motion of the next step based on current state and events. This means that at any instance in time, the trajectory of a motion system can be altered with respect to certain desired kinematic or dynamic constraints. For industrial applications this makes manufacturing on near-repetitive or non-rigid structures (e.g. flexible displays) possible. When applied to a robotic manipulator, this enables obstacle avoidance to no longer be on path planning level, but on trajectory planning level, where kinematic or dynamic constraints can be taken into account. This results in a motion that is smoother than when obstacle avoidance with path planning is employed. For both application areas this direct trajectory generation method is implemented and shows high flexibility in constrained motion trajectory design.

This paper proposes a new geometric control method for homography-based visual servo control of Underactuated UAVs. In order to solve the application difficulties of geometric control in HBVS and explore a visual servo control technology that can be applied to aerial detection operations, this paper integrates the geometric control into the visual servoing framework and design a new homography-based geometric visual servoing controller. The outer loop is used as feedback information using the virtual homography matrix between the two images. The inner loop controls the orientation of the UAVs through geometric control. The stability of the proposed controller is proved based on Lyapunov’s theory. The proposed method has better transient performance and dynamic performance than the conventional visual servo method. The excellent performance of the controller has been proven by a large number of experiments. In addition, the application of the controller on an unmanned aerial manipulator is demonstrated.

This paper is oriented to the transmission line inspection environment, aiming to solve the problem of how to control the robotic arm to quickly and accurately grasp the target object, and work on the planning of the motion path and the position-based visual servo control method. For the spatial trajectory planning of the robotic arm, linear trajectory planning and circular arc trajectory planning are carried out respectively. Between the reaction speed problem of the traditional RRT motion algorithm in collision-free motion planning, a two-way RRT-Connect path planning method is proposed. Then the visual servo control algorithm of the UAV robotic arm is proposed. The position-based visual servo control method is adopted, while the EK-SVSF position estimation algorithm and the OWA-based stepwise data fusion algorithm are combined for optimal position estimation of the target during transmission line inspection. It is verified in simulation experiments that the improved RRT algorithm can obtain the shortest path planning in a shorter time with better performance. Finally, the grasping experiment is carried out in a real robotic arm transmission line inspection scene. The robotic arm path planning algorithm and visual servo control proposed in this paper are combined to carry out grasping experiments in a static cluttered environment. The experimental results show that the algorithm proposed in this paper has the best grasping success rate, servo success rate, and grasping similarity. In addition, the average errors in x-axis, y-axis and z-axis of the proposed method are 0.19cm, 1.11cm and 0.18cm, respectively, which show a good grasping accuracy, indicating that the control method proposed in this paper can be applied to the real transmission line inspection work scenarios.

U ovom preglednom radu su prikazane metode vizuelnog upravljanja robotskih sistema, sa primarnim fokusom na mobilne robote sa diferencijalnim pogonom. Analizirane su standardne metode vizuelnog upravljanja bazirane na (i) greškama u parametrima slike (engl. Image-Based Visual Servoing - IBVS) i (ii) izdvojenim karakteristikama sa slike neophodnim za estimaciju položaja izabranog objekta (engl. Position-Based Visual Servoing - PBVS) i poređene sa novom metodom direktnog vizuelnog upravljanja (engl. Direct Visual Servoing - DVS). U poređenju sa IBVS i PBVS metodama, DVS metod se odlikuje višom tačnošću, ali i manjim domenom konvergencije. Zbog ovog razloga je DVS metod upravljanja pogodan za integraciju u hibridne sisteme vizuelnog upravljanja. Takođe, predstavljeni su radovi koji unapređuju sistem vizuelnog upravljanja korišćenjem stereo sistema (sistem sa dve kamere). Stereo sistem, u poređenju sa alternativnim metodama, omogućava tačniju ocenu dubine karakterističnih objekata sa slike, koja je neophodna za zadatke vizuelnog upravljanja. Predmet analize su i radovi koji integrišu tehnike veštačke inteligencije u sistem vizuelnog upravljanja. Ovim tehnikama sistemi vizuelnog upravljanja dobijaju mogućnost da uče, čime se njihov domen primene znatno proširuje. Na kraju, napominje se i mogućnost integracije vizuelne odometrije u sisteme vizuelnog upravljanja, što prouzrokuje povećanje robusnosti čitavog robotskog sistema.

At the beginning of its application, arm-robot manipulator worked blindly in completing the assigned task, and along with the improvement of camera technology as it is getting cheaper and smaller, the application of visual sensor lead to visual servoing control which utilized target detection as the input to control/move the end-effector of an arm-robot. The application of camera in arm-robot manipulator is divided into eye-in-hand where a camera is mounted to the robot, and eye-to-hand where the camera is fixed elsewhere. Visual control involves kinematics modeling and target position in image plane provided by image processing to ensure the motion accuracy in grasping and harvesting the fruit. The end-effector movement for harvesting relies heavily on the accuracy of target position detection that can be obtained by image processing method. This paper is a review study that discusses the design of visual servoing control of an arm-robot manipulator applied in agriculture starting from kinematics and inverse kinematics for controlling the motion and trajectory of the robot, and image processing for target detecting. An example of an image processing method is given by using Edge Detection method for detecting a dragon fruit simulated in SCILAB.

In this paper we study image based visual servo (IBVS) control of a four rotor vertical take-off and landing (VTOL) craft known as an X4-flyer. The approach taken is tailored to planar visual targets and is based on a reformulation and extension of 2 1/2 D image-based visual servo design to the control of dynamic under-actuated systems. Exponential stability of the closed loop system is proved and simulation results are presented.

This paper presents a novel combination of visual servoing (VS) control and neural network (NN) learning on humanoid dual-arm robot. A VS control system is built by using stereo vision to obtain the 3D point cloud of a target object. A least square-based method is proposed to reduce the stochastic error in workspace calibration. An NN controller is designed to compensate for the effect of uncertainties in payload and other parameters (both internal and external) during the tracking control. In contrast to the conventional NN controller, a deterministic learning technique is utilized in this work, to enable the learned neural knowledge to be reused before current dynamics changes. A skill transfer mechanism is also developed to apply the neural learned knowledge from one arm to the other, to increase the neural learning efficiency. Tracked trajectory of object is used to provide target position to the coordinated dual arms of a Baxter robot in the experimental study. Robotic implementations has demonstrated the efficiency of the developed VS control system and has verified the effectiveness of the proposed NN controller with knowledge-reuse and skill transfer features.

Tetrapods have the unique property of self-aligning on a flat surface with one arm pointing in the direction perpendicular to the surface plane. The positioning of single tetrapods on the flattened tip of commercial AFM probes (see image) is reported. These tetrapod-functionalized AFM probes are used to image the topography of different samples revealing excellent spatial and vertical resolution. Detailed facts of importance to specialist readers are published as ”Supporting Information”. Such documents are peer-reviewed, but not copy-edited or typeset. They are made available as submitted by the authors. Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.

In this paper, we propose a dynamic visual servo controller for precise tracking of robot manipulator. For the controller, we used a dual-loop structure which includes a vision controller and dynamic controller with different sampling speed. The vision controller is accommodated in the outer control loop with the aid of eye-in-hand camera, implementing the image based visual servoing method. As an inner loop controller, an adaptive backstepping controller is derived for position control of joint angle together with PID controller. The performance of proposed visual servo controller has been verified through computer simulation with V-REP simulation package.

This paper addresses the adaptive visual servoing control for robotic manipulator under uncalibrated eye-to-hand configuration with unknown actuator backlash. Most existing control approaches to visual servoing manipulator system ignore actuator backlash constraint, which is inevitable in mechanical robot and will significantly affect the dynamic performance. To alleviate the deleterious and undesirable effect caused by the unknown actuator backlash, a smooth adaptive inverse is proposed to compensate the backlash effect Based on the visual servoing system, a novel updating law is presented to estimate the backlash model parameters. Moreover, an adaptive image-based visual servoing(IBVS) controller is constructed to guarantee the global stability of closed-loop system and the boundary of parameters. The stability of dynamic system and convergence of the image error are proved by Lyapunov method. Lastly, simulations are carried out to validate the availability of the proposed controller.

Visual servoing is a method to achieve precise positioning and motion control of objects by visual feedback, and it is widely applied in the fields of robotics and unmanned aerial vehicles (UAVs) in recent years. This paper presents a novel image-based visual servoing (IBVS) control method for UAVs based on fuzzy logic to effectively solve the problem under field of view constraint and improve the control efficiency. In this paper, a fuzzy logic of servo gain is designed for the control input of visual servoing, which solves the problem of feature loss in IBVS and improves the efficiency. Meanwhile, a deep computing method based on known data is proposed to solve the unknown depth of Jacobian matrix, which makes the control easier to converge. The effectiveness of the proposed method is verified by the simulation of a quadrotor UAV equipped with a monocular camera.

For a visual servo system, there usually exists the problem of time-delay likely caused by long image processing and data transmission. The visual servo system of our robot is subject to two main limitations stemming from the specific commercial mobile manipulator, of which one is the large time-delay due to image transmission, whereas the other is failure to directly command each joint velocity as the visual servo's control input. In this paper, we propose a novel visual servo system to compensate the large time-delay, and we use integral of velocity which incorporating the image estimation and prediction with the kinematic model so as to achieve indirect velocity control with position based control mode joint. Our proposed visual servo system controls the neck joints of robot and keeps the object within the field of view of the camera during the approaching phase. We evaluate the proposed approach by experiment on a real wheeled humanoid robot and find the resulting performance quite promising, showing that our method is feasible and practical.

A review on visual servoing for underwater vehicle manipulation systems automatic control and case study