壳聚糖基聚合物碳点荧光材料合成及其自组装载药应用

A novle polymer carbon dots was successfully synthesized with citric acid and ethylenediamine by a simple and cost-effective method to sensitively detect Cr (VI). This kind of carbon dots material was a novel carbon-based fluorescent polymer carbon dots which have good dispersibility, low toxicity, easy surface modification and stable optical properties. The fluorescence intensity of the polymer carbon dots is quenched by the presence of Cr (VI) with a Stern-Volmer constant of 0.436ppm (R2=0.9988). Hence this probe can be used for domestic water Cr (VI) determination.

ZnCl2 Enabled Synthesis of Highly Crystalline and Emissive Carbon Dots with Exceptional Capability to Generate O2⋅–

Involvement of clear photoluminescence (PL) mechanism in specific chemical structure is at the forefront of carbon dots (CDs). Supramolecular interaction exists in plenty of materials, offering an inherent way to administrate the optical and photophysical properties, especially in terms of newly developed polymer carbon dots (PCDs). However, supramolecular-interaction-derived PL regulation is always ignored in the shadow of many kinds of PL factors, and we still have a limited understanding on the distinct chemical structure and mechanism of supramolecular effect in PCDs. Herein, several distinct photoluminescent phenomena of PCDs under aqueous and solid state are reviewed in terms of supramolecular cross-linking, with highly emphasizing the importance of supramolecular cross-link-enhanced emission (SCEE) effects, and the regulated function of supramolecular interaction's intensity and types between PCDs for special PL behaviors of PCDs. In addition, we categorize the photoluminescent phenomena in PCDs into the following aspects: supramolecular cross-link-enhanced dilute-solution-state emission, concentration-controlled multicolor emission, supramolecular regulation for quenching-resistant solid-state fluorescence, as well as supramolecular cross-link-assisted room-temperature- phosphorescence (RTP) under solid states. Furthermore, the applications of PCDs in light-emitting diodes (LED), solar cells, and anticounterfeiting and data encryption, etc., are presented, based on the distinct supramolecular cross-link-regulated photoluminescent phenomena, especially the solid-state emission. Finally, a brief outlook is given, highlighting the currently existing problems and development direction of supramolecular cross-link-regulated emission in PCDs.

Despite the various synthesis methods to obtain carbon dots (CDs), the bottom‐up methods are still the most widely administrated route to afford large‐scale and low‐cost synthesis. However, as CDs are developed with increasing reports involved in producing many CDs, the structure and property features have changed enormously compared with the first generation of CDs, raising classification concerns. To this end, a new classification of CDs, named carbonized polymer dots (CPDs), is summarized according to the analysis of structure and property features. Here, CPDs are revealed as an emerging class of CDs with distinctive polymer/carbon hybrid structures and properties. Furthermore, deep insights into the effects of synthesis on the structure/property features of CDs are provided. Herein, the synthesis methods of CDs are also summarized in detail, and the effects of synthesis conditions of the bottom‐up methods in terms of the structures and properties of CPDs are discussed and analyzed comprehensively. Insights into formation process and nucleation mechanism of CPDs are also offered. Finally, a perspective of the future development of CDs is proposed with critical insights into facilitating their potential in various application fields.

These days, carbon dots (CDs) are the rising stars of nanomaterials. Carbon dots (CDs) are small carbon nanoparticles with the same type of surface passivation (less than 10 nm in size). Researchers found C-dots by accident while purifying single-walled carbon nanotubes (SWCNTs) manufactured using the arc-discharge process. Toxic metal-based quantum dots are being replaced with carbon dots (QDs). Carbon dots are currently being prepared from a variety of natural resources in order to obtain self-passivated products at a reasonable cost. Because of their superior photo physical characteristics, biocompatibility, and low toxicity, carbon dots have prospective applications in bio sensing, bio imaging, and drug administration. Different synthetic processes, precursors, salient properties, and applications were reviewed in this review, as well as some future prospects, obstacles, and possible solutions for future development. Because of their tunable optical characteristics and better biocompatibility, luminous carbon-based nanomaterials have sparked a lot of scientific interest. Different light emission properties of carbon are discussed in this review. Distinct synthesis procedures have resulted in different carbon dots (CDs). Summarized here. The optical properties of CDs that haven't been synthesized yet surface doping and element doping can be used to further control it. CDs are being functionalized for an adjustable band gap. As a result of their luminescent with reduced cytotoxicity and tunable optical characteristics CDs have been thoroughly investigated in terms of their potential uses in biomedicine, such as analytical sensors, and instruments for bioimaging. Fluorescent carbon dots are a new type of nanomaterial from the carbon family. Green CDs, which have attracted a lot of attention from researchers because of their better water solubility, high biocompatibility, and eco-friendly nature when compared to chemically generated CDs, can be made from a variety of inexpensive and renewable resources. The presence of heteroatoms on the surface of green CDs in the form of amine, hydroxyl, carboxyl, or thiol functional groups, which can improve their physicochemical qualities, quantum yield, and likelihood of visible light absorption, eliminates the need for additional surface passivation.

Carbon dots (CDs) have outstanding optical properties, biocompatibility, and photostability, making them attractive for imaging applications. A facile and green one-step hydrothermal synthesis method is proposed, which can be safely used in a wide range of applications such as chemical sensing, bioimaging, and optoelectronics. In this study, we report green synthesis of carbon dots from bitter orange juice (Citrus Aurantium) by hydrothermal treatment for the first time. We studied effects of time, temperature, and pH on fluorescence of CDs, characterized them using various spectroscopic and microscopic methods, and evaluated their toxicity to different cell lines. Identifying an optimum reaction condition of 180 ºC for 7 h heating gave CDs that showed pH-dependent fluorescence, with the largest fluorescence at a pH of 7.0. The CDs were 1-2 nm in size with a spherical morphology and negative surface charge. The CDs showed a high quantum yield of 19.9 %, reasonable photostability, excellent water solubility, and long fluorescence lifetime. A one step hydrothermal rout led to various hydrophilic functional groups on the surface of the CDs. Our results showed that the CDs were non-toxic over a large concentration range and effective for imaging of cells, indicating their potential as imaging probes in medical diagnostics and biosensor applications.

Smartphone-based portable device for rapid and sensitive pH detection by fluorescent carbon dots

Zwitterionic nanogels crosslinked by fluorescent carbon dots for targeted drug delivery and simultaneous bioimaging

In this work, the ability of tuning work function for polymer carbon dots (PCDs) is systematically studied for the first time. Their application of both cathode and anode interlayers in polymer solar cells (PSCs) is achieved. PCDs possess abundant surface functional groups, which can be modified under control. Through regulating surface groups with more electron‐donating amino (PCD‐NH2) or electron‐withdrawing carboxy (PCD‐COOH), PCDs can decrease or increase work function of electrode, respectively. Therefore, PCD‐NH2 can act as cathode interlayer while PCD‐COOH plays the role of anode interlayer in PSCs. The single material system to act as both interlayers is rarely reported previously. This can simplify the design of materials and the device fabrication process. In addition, PCDs are green, low‐cost, stable, and easily fabricated. Therefore, it is demonstrated that PCDs are promising for commercial interlayer materials in optoelectronic devices.

Orange-red, green, and blue fluorescence carbon dots for white light emitting diodes

X-ray absorption spectroscopy examination of Cr, Co, and Cu binding on fluorescent carbon dots

Mercury ions (Hg2+) seriously harm the central nervous system of humans, leading to brain damage and even heart failure and death. Therefore, effective detection of Hg2+ in water quality has become an urgent research field. It is very important to develop economically efficient fluorescent sensors to achieve rapid and sensitive detection of Hg2+. Therefore, the high fluorescence quantum yield fluorescent carbon dots (CDs) with amide group were prepared. The process of preparing CDs was regulated by multiple key factors (carbon source, proportion, time), and the CDs with the best fluorescence performance were selected. It was comprehensively characterized, including fluorescence performance, surface structure, phase, and morphological characteristics. The amide group endows CDs with the ability to act as both donors and acceptors for hydrogen bonding, forming complexes with metal ions, thus making them suitable for the detection of Hg2+. It is worth noting that CDs can quickly detect Hg2+ within 1 min, and there is a good linear relationship within the ranges of 0.001-200 μM and 200-500 μM. The detection limit of UC-CDs is 8.2 nM. This study provides a fluorescent sensor with fast reaction, excellent sensitivity, and selectivity for the efficient detection of Hg2+ in water.

Nanosized fluorescent carbon particles, namely, carbon dots (CDs), are a kind of fluorescent material that has drawn increasing attention in recent years. CDs have size-, surface chemistry-, and wavelength-dependent luminescence emission, which is different from traditional semiconductor-based quantum dots. Moreover, with excellent chemical stability, good biocompatibility, low toxicity, up-conversion emission, resistance to photo bleaching, as well as easy chemical modifications, CDs are promising for substantial applications in numerous areas: bioimaging, sensors, and energy-related devices. Herein, three kinds of fluorescent dots are reviewed: graphene quantum dots (GQDs), carbon nanodots (CNDs) and polymer dots (PDs). After the first reported CDs prepared from electrophoretic analysis and purification of fluorescent carbon nanotube fragments, there were hundreds of publications focusing on fluorescent CDs. Bioimaging was one of the most common applications of the CDs; therefore, in this review, most of the chosen reference papers were related to bioimaging based on CDs.

Formation of N, S-codoped fluorescent carbon dots from biomass and their application for the selective detection of mercury and iron ion

Developing highly fluorescent biogenic carbon dots (CDs) as molecular probes and cellular imaging agents with excellent cellular biocompatibility and water dispersibility can advance the scope of CDs in various biomedical applications. The present work aims to produce CDs from biological precursors such as natural amino acids. Due to their molecular recognition properties, the resultant CDs exhibit biocompatibility, polar functional groups, and selective molecule sensing. Microwave (MW)-assisted carbonization of L-tryptophan, L-glutamic acid, and their mixture led to the formation of CDs. However, the CDs derived from the mix of amino acids exhibited strong emission at 450 nm, with a quantum yield of 31.3%, and showed excellent stability under wide pH conditions. These CDs have a crystalline graphitic core, predominantly derived from the carbonization of the aromatic moiety intrinsic to L-tryptophan amino acid, while the partial carbonization of L-glutamic acid led to anchor polar functional groups on the CDs surface. These CDs were established as molecular probes for sensing the biomolecule cysteamine with enhanced sensitivity and remarkable cross-selectivity among the interfering metal ions, anions, and other thiols. To demonstrate these materials' cellular biocompatibility, the cell viability of MCF-7 and fibroblast cells was studied following their exposure to CDs. The studies revealed that the fluorescent CDs did not elicit cytotoxic effects on the cells at elevated concentrations. The CDs from the mixture of amino acids were efficiently internalized by MCF-7 cells, enabling efficient imaging of live cells. Overall, this study developed biogenic and cellular biocompatible CDs with robust luminescent properties and demonstrated their applications in biomolecular sensing, cellular uptake, and imaging.