相手船による妨害ゾーンとその表示について

Evaluation of collision risk plays a key role in developing the expert system of navigation and collision avoidance. This paper presents a new collision risk model formula that is one modification model on the basis of one approach to the evaluation of collision risk using sech function produced in earlier studies. And as a tool of the evaluation field of ship collision, this paper applied the new model in appraising the collision risk and represented how to decide the safe range of own ship's action. Moreover this paper also analyzed theoretically how to determine the coefficients as described in the new modification model, and suggested the appropriate values as applicable.

선박교통류 평가는 대상해역 해상교통특성 파악을 통하여 정량화된 체계화된 교통관리를 수행함으로써 해양사고를 예방하는데 중요하다. 해상교통류의 특성은 선박자동식별장치(AIS, Automatic Identification System)가 선박에 설치됨에 따라 이 장치에서 수신된 정보를 토대로 평가할 수 있다. 본 연구에서는 해상교통관제센터(VTS, Vessel Traffic Services)에서 선박으로부터 수집된 위치, 속력, 침로, 시간 정보로부터 항로상에 해상교통류를 평가하기 위한 시뮬레이터를 구현하였다. 그 결과 해상교통관제센터에서 수집된 데이터로부터 선박 통항량, 통항분포, 선박속력분포, 기하학적 충돌빈도가 계산되어 표시된다. 이러한 해상교통류평가 평가는 해상교통관제사가 해상교통관리의 관점에서 해상안전을 위한 서비스를 제공하는데 유효하게 활용될 수 있을 것으로 사료된다. Maritime traffic assessment is important to understand the characteristics of maritime traffic and to prevent maritime accidents. The maritime traffic assessment can be calculated from the ship trajectory data observed by using AIS(Automatic Identification System). This paper developes a maritime traffic assessment tool using ship's position and speed, course, time data from ships navigating waterways. The results are represented in terms of the number of traffic quantity and traffic distribution, speed distribution, geometric collision candidates. The developed tool will contributes to advance maritime traffic safety by VTS(Vessel Traffic Services).

This is a combination of YOLO (you only look once) target recognition detection algorithm and AIS (Automatic Identification System) automatic ship identification system to assist vessels in inland navigation to carry out vessels and obstacle avoidance. This system proposes a ship-assisted collision avoidance system for ship collision accidents caused by a narrow inland waterway and complex navigation channel. The system can process the image and video information acquired by the high-definition camera mounted on the ship, and frame and mark the ships in the current sea area, and combine the AIS system to realize the visualization of the ship information and improve the global view. The experiment shows that the system can effectively identify and frame the ship and realize the visualization of AIS information, and the transformed image and video information can be used for decision-making by the ship's driver.

The AIS (Automatic Identification System) became a standard under the International Convention for the Safety of Life at Sea (SOLAS) in December 2001. Using the AIS transponder, the vessel will report its position, identity heading and other information to other ship traffic in the same area. The AIS is a significant contribution to the control and safety of shipping. Transport Canada (TC) is a pioneer internationally in using the AIS (R4A airborne AIS transponder) integrated with the remote sensing system (MSS 6000 from Swedish Space Corporation) on board their aircraft, in order to add the information on ship identity and voyage to the information from other sensors. The AIS integration provides a quantum leap in the effectiveness of the surveillance mission. In the Canadian system integration, detailed vessel information obtained through the AIS system is displayed and correlated with information received from other sensors. All information is also presented together with a high-resolution digital map including nautical chart data. The AIS provides the operators with vessel voyage and identity information. It is very useful for vectoring the aircraft to areas where ships have been reported. The advent of AIS simplifies surveillance procedures and makes each hour of surveillance more productive. During last year TC reported that over 9700 vessels were over flown. It is anticipated that over 20,000 AIS targets will be acquired using AIS in 2007–2008. The experience from Canada also indicates an outstanding VHF range. During missions, vessels have been identified as far away as 200 nautical miles (n.m.) from the aircraft. The AIS information together with other sensor images gives a comprehensive image that will dramatically improve the chance to tie a ship to a detected illegal oil spill. Receiving ship identity information will enable aircrews to conduct covert operations and contact the suspect ship from far standoff distances. This will also act as a deterrent to potential polluters. Integrating AIS within the operational requirements of surveillance programs, dedicated to minimizing the adverse effects of shipping on the marine environment, will make a significant contribution towards improving the effectiveness of surveillance missions.

Maritime traffic pattern extraction is a fundamental and crucial factor for maritime surveillance and anomaly detection. Emerging technologies like Automatic Identification System (AIS) provides multi-dimensional data which is used to construct a maritime traffic model. In this paper, we propose a framework of maritime traffic pattern extraction from vessel AIS information, which learns a traffic pattern using an unsupervised technique, and can be applied on historical Automatic Identification System data. AIS data is a kind of spatio-temporal data that contains information of location data, as well as time stamps. In this way, traffic pattern is described by AIS data. Furthermore, we conduct a simulation experiment that extracts traffic pattern from the AIS data through the unsupervised technique. The proposed framework takes advantage of AIS data, which is a type of the spatiotemporal data that consists of vessel motion information, to perform the experiment. The result shows that the unsupervised framework converts useful information from raw AIS data to effective traffic pattern. The proposed method strongly supports the further research on maritime traffic pattern extraction of AIS data. Besides, an overview of the framework and the unsupervised technique for high-level maritime situation awareness is presented.

The Automatic Identification System (AIS) is a ship reporting system based on messages broadcast by vessels carrying an AIS transponder. The recent increase of terrestrial networks and satellite constellations of receivers is making AIS one of the main sources of information for Maritime Situational Awareness activities. Nevertheless, AIS is subject to reliability and manipulation issues; indeed, the received reports can be unintentionally incorrect, jammed or deliberately spoofed. Moreover, the system can be switched off to cover illicit operations, causing the interruption of AIS reception. This paper addresses the problem of detecting whether a shortage of AIS messages represents an alerting situation or not, by exploiting the Received Signal Strength Indicator available at the AIS Base Stations (BS). In designing such an anomaly detector, the electromagnetic propagation conditions that characterize the channel between ship AIS transponders and BS have to be taken into consideration. The first part of this work is thus focused on the experimental investigation and characterisation of coverage patterns extracted from the real historical AIS data. In addition, the paper proposes an anomaly detection algorithm to identify intentional AIS on-off switching. The presented methodology is then illustrated and assessed on a real-world dataset.

The automatic identification system (AIS) provides detailed information about vessel movement that has gained wide application in areas such as ship behavior analysis over the past decade. Based on the AIS data in January and February of the lunar calendar in 2019 and 2020, this study analyzed the number and size of ships, the spatial distribution characteristics, such as ship position and density, ship speed, as well as the temporal characteristics of daily and monthly changes of ship flow, and then evaluated the impact of the COVID-19 epidemic on ship activities in Dongying Port waters. The results show that the number of tankers declined to a lesser extent compared to fishing and cargo ships after the outbreak of the COVID-19 epidemic. Because berthing activities would require extra operating time due to the epidemic, ships may require longer turnaround times. In general, tankers in Dongying Port waters were less affected by the epidemic than cargo and fishing ships.

국제해사기구(International Maritime Organization, IMO)에서는 선박의 해상 충돌을 방지하기 위하여 SOLAS의 요구조건에 따라 모든 선박에 대하여 선박자동식별장치(Automatic Identification System, AIS)를 의무적으로 장착하도록 권고하고 있다. AIS를 사용하면 타선에 대한 제원 및 항행정보의 획득이 가능하여 충돌방지뿐만 아니라 광역관제, 조난 선박의 탐색구조 등 안전관리에도 활용이 가능하다. 본 논문에서는 AIS 장비를 사용하여 ADS-B (Automatic Dependent Surveillance - Broadcast) 개념 기반의 항공감시용 송수신기를 구현한 결과에 대하여 살펴보도록 한다. 기본적으로 AIS는 해상에서 사용되기 때문에 고도 정보를 사용하지 않지만, AIS 장비 내부에 사용하는 GPS (Global Positioning System) 칩셋에서 제공하는 고도 정보의 추출이 가능하다. 고도 정보를 포함한 감시 메시지 형식을 정의하고, SOTDMA (Self-Organizing Time Division Multiple Access) 방식을 개선하여 ADS-B 송수신기를 구현하였다. 적용 결과를 확인하기 위하여 지상시험 및 비행시험을 수행하였다. International Maritime Organization (IMO) recommends the installation of an Automatic Identification System (AIS) according to requirements by SOLAS to avoid maritime collision. AIS provides traffic information of other ships that may be used for maritime traffic control, SAR (Search and Rescue) and collision avoidance to apply safety management. In this paper, preliminary results to implement an aeronautical surveillance transceiver using AIS transceiver based on ADS-B concepts are described. Although altitude information is not required for AIS since the AIS is operated at MSL (Mean Sea Level), altitude information can be extracted by a GPS (Global Positioning System) chip-set in the AIS transceiver. ADS-B transceiver is implemented by defining a surveillance message format including the altitude information and modifying SOTDMA (Self-Organizing Time Division Multiple Access) protocol. Ground tests and flight tests are performed to validate the implementation results.

In the aftermath of the El Faro sinking, one of the NTSB recommendations was for NOAA to explore increasing the reception of weather data from ships in order to improve the weather forecast products that they distribute. Currently NOAA runs the Voluntary Observing Ship (VOS) program, where ships voluntarily submit weather observations to NOAA. However, this data is submitted infrequently, typically four times per day and is a manual process. One method being explored to automate and increase the frequency of data submittal is by using the Automatic identification System (AIS). Most ships (SOLAS-class vessel for example) have a Class A transponder due to mandatory carriage requirements. Many vessels that are not required, also have AIS transponders (either a Class A or B). All of these AIS transponders can be used to transmit AIS message 8 (broadcast binary message) simply by sending the transponder the appropriate NMEA sentence (BBM). The weather data can be embedded in an AIS message 8 and transmitted by the ship automatically. This transmission will be received by terrestrial receivers (when in range) or by satellite AIS receivers. The AIS weather data can then be converted into the appropriate format and forwarded to the NOAA weather database automatically. By leveraging this installed base of AIS transmitters, the volume of weather data being sent to NOAA could be greatly increased. The USACE and MARAD have been exploring the feasibility of this concept. An initial proof-of-concept was tested on the Cape Wrath in Baltimore in October 2018. After this successful demonstration, a prototype was installed on the T/S Kennedy during her training cruise Jan-Feb 2019. More recently, systems were installed on three commercial vessels operating in the Pacific Ocean. This report will discuss the concept, the demonstrations, and the results to date including the efficacy of the various ASM formats.

Indian Ocean Rim countries (IOR) rely on fisheries for socio-economic well-being and food security. Monitoring fisheries equipped with Automatic Identification Systems (AIS) enables the evaluation of fishing activities. However, only small fractions of large vessels use AIS, and increasingly vessels are avoiding or circumventing AIS use. We used Global Fishing Watch AIS fishing effort data for 2018–2020, combined with independently derived gear- and country-specific catch rates to estimate catch volumes by AIS equipped industrial vessels in the Indian Ocean. We compared these estimates to the catches reported by countries to the Food and Agriculture Organization (FAO), which represent global accountability. Results suggest that AIS-equipped industrial vessels caught an average of 400,000 t∙year−1, of which 57% was by Distant-Water Fishing (DWF) vessels from countries outside the region. Spain, France and South Korea had AIS derived catch estimates substantially lower than catches officially reported by these countries, suggesting these vessels may turn off AIS transponders to potentially elude detection either by authorities or for other operational reasons. In contrast, Taiwan and China had 6 and 4 times more AIS estimated catches than they reported to the FAO. This suggests that these countries may not meet their international reporting obligations. Underreporting fisheries catches undermines management efforts and contributes to the unsustainable use of marine resources. Our study revealed an important role AIS technology can play in estimating fishing activities in the Indian Ocean, despite its currently limited adoption and the increasing evasion tactics by some fleets. Discrepancies between AIS-derived catch estimates and officially reported data underline the challenges in fisheries monitoring and enforcement, and highlight the lack of compliance enforcement by many flag countries.

This paper presents a probabilistic decision-making framework for rear-end collision avoidance systems, focusing on modeling the impact of major collision-causing factors on the occurrence of accidents. Decisions on when and how to assist drivers are made using a Bayesian network approach according to collision risk evaluation results, given a prior probabilistic knowledge. The structure of the Bayesian network model is learnt using a K2 algorithm with a practical dataset. To provide adequate response time for drivers, we also predict collision probability in the next monitoring interval using a Kalman filter model. The prediction accuracy is evaluated with different use cases and compared to real scenarios with the obtained dataset. To make our framework more relevant to practical applications, we also discuss the corresponding safety control strategies by classifying collision risk into high and low levels. In addition, the proposed model is evaluated through experiments including simulations and road tests. In the simulations, the algorithms are tested in different scenarios with various configurations of weather conditions, driver response capability, and vehicular dynamics. In order to demonstrate collision avoidance performance, the proposed model is also compared to existing schemes. In the road tests, the algorithm is embedded into an unmanned vehicle with predefined parameters to evaluate the impact of computational complexity on rear-end collision avoidance. Numerical results show that the proposed model provides an accurate estimation for car-following collision risk with a relatively low complexity, taking into account the impacts of vehicle dynamics, driver reaction capacity, and external environment on rear-end collisions.

Ship motions are usually employed to analyze water transportation system. Interpolation of ship motions can be used for estimating the lost ship movement information, which is important for analyzing water traffic. Although some methods are proposed to interpolate ship trajectory, these methods are needed to improve interpolation accuracy. In addition, the course and speed of ship are not interpolated in previous studies. This article proposes a novel estimation algorithm for interpolating ship motions. First, the bilateral filtering is used to smooth the navigation trajectories, then a novel interpolation approach forecasts the vessel positions during the interpolation time period by taking into account the dynamic information of Automatic Identification System (AIS), and then forms the interpolation track of the moving vessel. In order to validate the proposed method, the AIS data of Yangtze River is collected from the AIS stations and the proposed restoration methods are verified by MATLAB under simulation. The results show that the proposed method can effectively remove the inaccurate ship motion data and interpolate the lost ship motion data.

Vessel speed reduction measures are a management tool used to reduce the risk of whale-ship strikes and mitigate their impacts. Large ships and other commercial vessels are required to publicly share tracking information, including their speed, via the Automatic Identification System (AIS), which is commonly used to evaluate compliance with these measures. However, smaller vessels are not required to carry AIS and therefore are not as easily monitored. Commercial off-the-shelf marine radar is a practical solution for independently tracking these vessels, although commercial target tracking is typically a black-box process, and the accuracy of reported speed is not available in manufacturer specifications. We conducted a large-scale measurement campaign to estimate radar-reported speed error by comparing concurrent radar- and AIS-reported values. Across 3097 unique vessel tracks from ten locations, there was strong correlation between radar and AIS speed, and radar values were within 1.8 knots of AIS values 95% of the time. Smaller vessels made up a large share of the analyzed tracks, and there was no significant difference in error compared to larger vessels. The results provide error bounds around radar-reported speeds that can be applied to vessels of all sizes, which can inform vessel-speed-monitoring efforts using radar.

The synergic utilization of data from different sources, either ground-based or spaceborne, can lead to effective monitoring of maritime activities. To this end, the integration of synthetic aperture radar (SAR) images with data reported by the automatic identification system (AIS) is of high interest. Accurate matching of ships detected in SAR images with AIS data requires compensation of the azimuth offset, which depends on the ship’s velocity. The existing procedures interpolate the route information gathered by AIS to estimate the ship’s velocity at the epoch of the SAR data, to remove the offset. Matching accuracy is limited by interpolation errors and AIS route information unavailability or uncertainties. This paper proposes the use of SAR-based ship velocity estimations to improve the integration of AIS and SAR data. A case study has been analyzed, in which the method has been tested on TerraSAR-X images collected over the Gulf of Naples, Italy. Presented results show that the matching is improved with respect to standard procedures. The proposed method limits the distance between the AIS report and the SAR-based detection to less than 150 m, which is in line with maritime surveillance needs.

This Coastal and Hydraulics Engineering Technical Note (CHETN) describes a method for evaluating the received coverage from Automatic Identification System (AIS) shore sites and the availability of historic vessel position reports along the Ohio River. The network of AIS shoreside sites installed and operated by the US Army Corps of Engineers (USACE) and the US Coast Guard (USCG) receive information transmitted from vessels; however, reception of these transmissions is generally line-of-sight between the vessel and the AIS site antenna. Reception may also be affected by factors such as the quality of the transceiver installation aboard the vessel as well as the state of the equipment at the receiving site. Understanding how to define and quantify coverage gaps along the inland river system can inform research utilizing AIS data, provide information on the performance of the AIS network, and provide guidance for efforts to address identified coverage gaps