• Home
  • Search
  • 動的切削力を考慮した再生びびり振動の研究
  • Open Access IconOpen Access
  • Cite Icon2
  • https://doi.org/10.2493/jjspe1933.50.1079Copy DOI Icon

動的切削力を考慮した再生びびり振動の研究

Show More
  • Abstract
  • Literature Map
  • Citations
  • Similar Papers
Abstract

This paper deals with the analysis of regenerative chatter vibration in orthogonal and three-dimensional cutting, considering the cutting force due to not only uncut chip thickness but also the displacement velocity of a tool in the direction of the tool shank. Chatter stability limits obtained in the theoretical analysis are verified by some experiments which are carried out to investigate the influence of cutting conditions on the critical width (or depth) of cut. The results obtained are as follows: (1) Chatter stability limits evaluated by the analysis agrees quantitatively with the experimental value in orthogonal and three-dimensional cutting. (2) There is an unconditional stable region independently of the cutting stiffness and the structural dynamics. (3) By means of a dimensionless factor which is dependent on cutting conditions (e. g. cutting speed, depth of cut and shear angle etc.), it is able to estimate the influence of dynamic cutting force on chatter stability limits.

Similar Papers
  • Research Article
  • Citations19

Optimization of working parameters of water jet cutting in terms of depth and width of cut

  • Aug 07, 2011
  • Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
  • Y Ozcelik +4
  • Research Article
  • Citations5

Multi-Objective Optimization Using Box-Behken of Response Surface Methodology for High-Speed Machining of Inconel 718

  • Oct 01, 2014
  • Applied Mechanics and Materials
  • Mohd Shahir Kasim +6
  • Research Article
  • Citations7

Investigation of tangential force on ball nose rake face during high-speed milling of Inconel 718

  • Mar 14, 2018
  • Advances in Materials and Processing Technologies
  • M S Kasim +7
  • Research Article
  • Citations3

Comparison of the Methods for Calculating Instant Depth of Cut

  • Jan 01, 2013
  • Advanced Materials Research
  • Yong Sun +1
  • Research Article

Finite Element Simulations for Micromilling of Oxygen-free Copper

  • Jun 24, 2019
  • DEStech Transactions on Computer Science and Engineering
  • Xi-Kun Gao +4
  • Research Article
  • Citations1

Modeling and Optimization of Turning Hastelloy C-276 under Sustainable Machining Environments

  • Mar 18, 2024
  • Solid State Phenomena
  • Balkar Singh +3
  • Research Article
  • Citations17

Micro cutting of tungsten carbides with sem direct observation method

  • May 01, 2004
  • KSME International Journal
  • Heo Sung-Jung
  • Research Article
  • Citations44

Virtual Simulation and Optimization of Milling Applications—Part II: Optimization and Feedrate Scheduling

  • Aug 14, 2008
  • Journal of Manufacturing Science and Engineering
  • S Doruk Merdol +1
  • Research Article
  • Citations22

Effect of Cross Transfer Function on Chatter Stability in Plunge Cutting

  • Jan 01, 2010
  • Journal of Advanced Mechanical Design, Systems, and Manufacturing
  • Norikazu Suzuki +3
  • PDF
  • Research Article
  • Citations31

SWARA-CoCoSo method-based parametric optimization of green dry milling processes

  • Mar 24, 2022
  • Journal of Engineering and Applied Science
  • Partha Protim Das +1
  • Research Article

2315 Too life assessment of untreated and aged hardening Inconel 718 during end milling

  • Jan 01, 2014
  • The Proceedings of Design & Systems Conference
  • Mohd Shahir Kakim +6
  • Research Article

アルミニウム単結晶の超精密二次元切削機構

  • Jan 01, 1995
  • Journal of Japan Institute of Light Metals
  • Takao Yamazaki +4
  • Research Article
  • Citations2

OPTIMIZATION OF VARIABEL HELIX ANGLE PARAMETERS IN CNC MILLING OF CHATTER AND SURFACE ROUGHNES USING TAGUCHI METHOD

  • May 30, 2021
  • Journal of Engineering and Management in Industrial System
  • Festo Andre Hardinsi +2
  • Research Article

Surface Quality Enhancement in ASTM A36 Turning through Optimized Coolant and Tool Geometry

  • Mar 01, 2026
  • Journal of Physics: Conference Series
  • Zuliantoni +4
  • Research Article
  • Citations37

Investigation of surface topology in ball nose end milling process of Inconel 718

  • Apr 01, 2019
  • Wear
  • M.S Kasim +7
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.