NA-MEMD Is Actually What You Need for Computational Pulse Analysis

Various faults inevitably occur in mechanical systems and may result in unexpected failures. Hence, fault detection is critical to reduce unscheduled downtime and costly breakdowns. Empirical mode decomposition (EMD) is an adaptive time-frequency domain signal processing method, potentially suitable for nonstationary and/or nonlinear processes. However, the EMD method suffers from several problems such as mode mixing, defined as intrinsic mode functions (IMFs) with incorrect scales. In this paper, an ensemble noise-reconstructed EMD method is proposed to ameliorate the mode mixing problem and denoise IMFs for enhancing fault signatures. The proposed method defines the IMF components as an ensemble mean of EMD trials, where each trial is obtained by sifting signals that have been reconstructed using the estimated noise present in the measured signal. Unlike traditional denoising methods, the noise inherent in the input data is reconstructed and used to reduce the background noise. Furthermore, the reconstructed noise helps to project different scales of the signal onto their corresponding IMFs, instrumental in alleviating the mode mixing problem. Two critical issues concerned in the method, i.e., the noise estimation strategy and the number of EMD trials required for denoising are discussed. Furthermore, a comprehensive noise-assisted EMD method is proposed, which includes the proposed method and ensemble EMD (EEMD). Numerical simulations and experimental case studies on accelerometer data collected from an industrial shaving process are used to demonstrate and validate the proposed method. Results show that the proposed method can both detect impending faults and isolate multiple faults. Hence, the proposed method can act as a promising tool for mechanical fault detection.

A braking intention identification method based on empirical mode decomposition (EMD) algorithm and entropy theory for electric vehicles is proposed. EMD algorithm is given to decompose nonstationary brake pedal signal to stationary intrinsic mode function (IMF), which is the base of data mining. After that, entropy theory is used to extract brake pedal signal features. A braking intention identification model is built based on fuzzy c-means clustering algorithm. The hardware and software for braking intention identification system based on this method is set up to do offline and real-time experiments. The results show that the identification method proposed in this paper has good real-time quality and can distinguish moderate braking intention and gentle braking intention better.

In this paper, we propose a novel ECG signal enhancement method based on Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) and Higher Order Statistics (HOS). In our scheme, the noisy ECG signal is first decomposed adaptively into oscillatory components called intrinsic mode functions (IMFs) by using Empirical Mode Decomposition (EMD) or its variants. Therefore, the obtained modes are separated into two groups of noisy signal modes and one group of useful signal modes, by using a novel criterion derived from the HOS namely the fourth order cumulant or kurtosis. After that, a modified shrinkage scheme based on Interval Thresholding technique is adaptively applied to each selected IMF from the noise-dominant groups in order to reduce the noise and to preserve the QRS complex. The overall filtered ECG signal is then reconstructed by combining the thresholded IMFs and the retained unprocessed lower frequency relevant IMFs. Various tests and simulations are investigated to evaluate the performance of our proposed approach in combination with the EMD, Ensemble EMD (EEMD) and CEEMDAN algorithms. The simulation results carried on MIT-BIH Arrhythmia database, show that CEEMDAN method gives better performance than the two other methods, and outperforms some state-of-the-art methods in terms of Signal to Noise Ratio (SNR) and Root Mean Square Error (RMSE).

Empirical mode decomposition (EMD) is a widely used adaptive signal processing method, which has shown some shortcomings in engineering practice, such as sifting stop criteria of intrinsic mode function (IMF), mode mixing and end effect. In this paper, an improved sifting stop criterion based on the valid data segment is proposed, and is compared with the traditional one. Results show that the new sifting stop criterion avoids the influence of end effects and improves the correctness of the EMD. In addition, a novel AEMD method combining the analysis mode decomposition (AMD) and EMD is developed to solve the mode-mixing problem, in which EMD is firstly applied to dispose the original signal, and then AMD is used to decompose these mixed modes. Then, these decomposed modes are reconstituted according to a certain principle. These reconstituted components showed mode mixing phenomena alleviated. Model comparison was conducted between the proposed method with the ensemble empirical mode decomposition (EEMD), which is the mainstream method improved based on EMD. Results indicated that the AEMD and EEMD can effectively restrain the mode mixing, but the AEMD has a shorter execution time than that of EEMD.

Biomedical signals are in general non-linear and non-stationary which renders them difficult to analyze with classical time series analysis techniques. Empirical Mode Decomposition (EMD) in conjunction with a Hilbert spectral transform, together called Hilbert-Huang Transform, is ideally suited to extract informative components which are characteristic of underlying biological or physiological processes. The method is fully adaptive and generates a complete set of orthogonal basis functions, called Intrinsic Mode Functions (IMFs), in a purely data-driven manner. Amplitude and frequency of IMFs may vary over time which renders them different from conventional basis systems and ideally suited to study non-linear and non-stationary time series. However, biomedical time series are often recorded over long time periods. This generates the need for efficient EMD algorithms which can analyze the data in real time. No such algorithms yet exist which are robust, efficient and easy to implement. The contribution shortly reviews the technique of EMD and related algorithms and develops an on-line variant, called slidingEMD, which is shown to perform well on large scale biomedical time series recorded during neuromonitoring.

The prediction of mold level is a basic and key problem of continuous casting production control. Many current techniques fail to predict the mold level because of mold level is non-linear, non-stationary and does not have a normal distribution. A hybrid model, based on empirical mode decomposition (EMD) and support vector regression (SVR), is proposed to solve the mold level in this paper. Firstly, the EMD algorithm, with adaptive decomposition, is used to decompose the original mold level signal to many intrinsic mode functions (IMFs). Then, the SVR model optimized by genetic algorithm (GA) is used to predict the IMFs and residual sequences. Finally, the equalization of the predict results is reconstructed to obtain the predict result. Several hybrid predicting methods such as EMD and autoregressive moving average model (ARMA), EMD and SVR, wavelet transform (WT) and ARMA, WT and SVR are discussed and compared in this paper. These methods are applied to mold level prediction, the experimental results show that the proposed hybrid method based on EMD and SVR is a powerful tool for solving complex time series prediction. In view of the excellent generalization ability of the EMD, it is believed that the hybrid algorithm of EMD and SVR is the best model for mold level predict among the six methods, providing a new idea for guiding continuous casting process improvement.

In the present study, an adaptive Fourier Decomposition Method (FDM) is applied to identify damage at connections. For that purpose, an experimental single-story plane frame model is considered. The beam and columns of the frame are connected by angles and bolts, and the damage is introduced by loosening bolts at different locations. The frame is excited at the right top corner using a hammer, and strain time histories are collected from different points. The FDM and Empirical Mode Decomposition (EMD) algorithm are applied to characterize the damage sensitive features. The results obtained from the FDM are compared with the EMD algorithm, which shows that the performance of FDM is better, which motivates to extend its application further to estimate the amount of bolt loosening in terms of extracted damage sensitive features.

A Hilbert–Huang transform (HHT) is a time–frequency technique and has been widely applied to analyzing vibration signals in the field of fault diagnosis of rotating machinery. It analyzes the vibration signals using intrinsic mode functions (IMFs) extracted using empirical mode decomposition (EMD). However, EMD sometimes cannot reveal the signal characteristics accurately because of the problem of mode mixing. Ensemble empirical mode decomposition (EEMD) was developed recently to alleviate this problem. The IMFs generated by EEMD have different sensitivity to faults. Some IMFs are sensitive and closely related to the faults but others are irrelevant. To enhance the accuracy of the HHT in fault diagnosis of rotating machinery, an improved HHT based on EEMD and sensitive IMFs is proposed in this paper. Simulated signals demonstrate the effectiveness of the improved HHT in diagnosing the faults of rotating machinery. Finally, the improved HHT is applied to diagnosing an early rub-impact fault of a heavy oil catalytic cracking machine set, and the application results prove that the improved HHT is superior to the HHT based on all IMFs of EMD.

A brain-computer interface (BCI) is a communication approach that permits cerebral activity to control computers or external devices. Brain electrical activity recorded with electroencephalography (EEG) is most commonly used for BCI. Noise-assisted multivariate empirical mode decomposition (NA-MEMD) is a data-driven time-frequency analysis method that can be applied to nonlinear and nonstationary EEG signals for BCI data processing. However, because white Gaussian noise occupies a broad range of frequencies, some redundant components are introduced. To solve this leakage problem, in this study, we propose using a sinusoidal assisted signal that occupies the same frequency ranges as the original signals to improve MEMD performance. To verify the effectiveness of the proposed sinusoidal signal assisted MEMD (SA-MEMD) method, we compared the decomposition performances of MEMD, NA-MEMD, and the proposed SA-MEMD using synthetic signals and a real-world BCI dataset. The spectral decomposition results indicate that the proposed SA-MEMD can avoid the generation of redundant components and over decomposition, thus, substantially reduce the mode mixing and misalignment that occurs in MEMD and NA-MEMD. Moreover, using SA-MEMD as a signal preprocessing method instead of MEMD or NA-MEMD can significantly improve BCI classification accuracy and reduce calculation time, which indicates that SA-MEMD is a powerful spectral decomposition method for BCI.

Satellite Image Time Series (SITS) have recently been of great interest due to the emerging remote sensing capabilities for Earth observation. Trend and seasonal components are two crucial elements of SITS. In this paper, a novel framework of SITS decomposition based on Ensemble Empirical Mode Decomposition (EEMD) is proposed. EEMD is achieved by sifting an ensemble of adaptive orthogonal components called Intrinsic Mode Functions (IMFs). EEMD is noise-assisted and overcomes the drawback of mode mixing in conventional Empirical Mode Decomposition (EMD). Inspired by these advantages, the aim of this work is to employ EEMD to decompose SITS into IMFs and to choose relevant IMFs for the separation of seasonal and trend components. In a series of simulations, IMFs extracted by EEMD achieved a clear representation with physical meaning. The experimental results of 16-day compositions of Moderate Resolution Imaging Spectroradiometer (MODIS), Normalized Difference Vegetation Index (NDVI), and Global Environment Monitoring Index (GEMI) time series with disturbance illustrated the effectiveness and stability of the proposed approach to monitoring tasks, such as applications for the detection of abrupt changes.

A hybrid air quality early-warning framework: An hourly forecasting model with online sequential extreme learning machines and empirical mode decomposition algorithms

Reservoir characterization is one of the most challenging tasks that help in modeling different lithological properties like porosity, permeability and fluid saturation using seismic readings like velocity profile, impedance, etc. Such a model is required for field development, placing new wells and prediction management. Seismic attributes are being progressively utilized for the tasks of model building, exploration and properties estimation from the data. However, these tasks become very complex due to the nonlinear and heterogeneous nature of subsurface properties. In this context, present work proposes a recurrent neural network-based learning framework to classify porosity using seismic attributes as predictor variables. The approach begins by calculating different seismic attributes from the data. From the initially calculated attribute set, features that are to be used for classification are selected by using two different strategies. Firstly, the seismic attributes having good correlation strength with reservoir porosity are extracted. Subsequently, generative topographic map is utilized to select the significant features. The final reduced features set obtained by the integrated result of above two strategies is then fed as an input to the empirical mode decomposition (EMD) algorithm. The denoised features resulting from the EMD algorithm are used to train the classification models. Further, a comparison is carried out between the proposed classification framework $$(EMD+RNN)$$ and other supervised classifiers to show the performance of the proposed framework.

This paper proposed a method for roller bearing fault diagnosis using Empirical Mode Decomposition (EMD) algorithm and decision tree. First, to obtain the Intrinsic Mode Functions (IMFs) of bearing vibration signal processed by EMD and processing the IMFs with autocorrelation for noise elimination, then extract the principal frequency as features in frequency domain. Second, build up decision tree with C4.5 algorithm and forecast samples. Feedback the node attributes information to EMD for reducing the calculation of needless attribute and optimizing signal processing algorithm. The experimental bearing vibration signal in accordance with the following conditions: normal, inner race fault, outer race fault and balls fault. The experiment result illustrated that the correct ratio of diagnosis is high and efficient. The method proposed is high accurate and useful for safe production.

Empirical mode decomposition (EMD) is a powerful tool for the non-stationary and nonlinear signal analysis and has attracted considerable attention recently. However, one of primary problems existing in the EMD is the mode mixing, which makes the physical meaning of decomposition results obscure. The ensemble EMD (EEMD) is presented to alleviate the shortcoming. The EEMD is a noise-added method and can extract the components with truly physical meaning from the signal. Firstly, a simulation signal is used to test the performance of the EEMD; compared with the EMD, the EEMD illustrates the superiority over the EMD. Then, the fault diagnosis method based on the EEMD is applied to diagnose the faults of the gearbox with multiple faults and successfully extracts the multiple faults information from the collected signal. The results show that the fault diagnosis method based on the EEMD is a promising method for the fault diagnosis of gearboxes.

With the problem of magnetic anomaly signal in low SNR, we using empirical mode decomposition (EMD) algorithm and Savitzky-Golay filter to solve weak magnetic anomaly signal in noisy environment detection problem. With the EMD, the weak magnetic anomaly signal can be decomposed into different numbers of sub-signals called intrinsic mode functions (IMFs). The IMFs include signals different frequency component from high to low. Recover the signal with IMFs which correlation coefficient is low with noise signal and smooth the signal with Savitzky-Golay filter. The proposed method is verified by simulation on computer. The present experimental results show that this method is effective to detect the weak magnetic anomaly and recover the original signal.