Neural Network and Multiple Regression Models for PM10 Prediction in Athens: A Comparative Assessment

The aims of this study are to create an artificial neural network (ANN) model using non-specific water quality parameters and to examine the accuracy of three different ANN architectures: General Regression Neural Network (GRNN), Backpropagation Neural Network (BPNN) and Recurrent Neural Network (RNN), for prediction of dissolved oxygen (DO) concentration in the Danube River. The neural network model has been developed using measured data collected from the Bezdan monitoring station on the Danube River. The input variables used for the ANN model are water flow, temperature, pH and electrical conductivity. The model was trained and validated using available data from 2004 to 2008 and tested using the data from 2009. The order of performance for the created architectures based on their comparison with the test data is RNN > GRNN > BPNN. The ANN results are compared with multiple linear regression (MLR) model using multiple statistical indicators. The comparison of the RNN model with the MLR model indicates that the RNN model performs much better, since all predictions of the RNN model for the test data were within the error of less than ± 10 %. In case of the MLR, only 55 % of predictions were within the error of less than ± 10 %. The developed RNN model can be used as a tool for the prediction of DO in river waters.

Performance comparison of artificial neural network and multiple regression models for wire electrical discharge machining of haste alloy

The purpose of this study was to develop artificial neural network (ANN) and multiple linear regression (MLR) models that are capable of predicting the bonding strength of wood based on moisture content, open assembly time and closed assembly time of the joints prior to pressing process. For this purpose, the experimental studies were conducted and the models based on the experimental results were set up. As a result of the experiments conducted, it was observed that bonding strength first increased and then decreased with increasing the wood moisture content and adhesive open assembly time. In addition, the increased closed assembly time caused a decrease in bonding strength of wood. The ANN results were compared with the results obtained from the MLR model to evaluate the models’ predictive performance. It was found that the ANN model with the R 2 value of 97.7% and the mean absolute percentage error of 3.587% in test phase exhibits higher prediction accuracy than the MLR model. The comparison results confirm the feasibility of ANN model in terms of predictive performance. Consequently, it can be said that ANN is an effective tool in predicting wood bonding strength, and quite useful instead of costly and time-consuming experimental investigations.

Purpose – This paper aims to predict the needle penetration force (NPF) in denim fabrics using the artificial neural network (ANN) and multiple linear regression (MLR) models based on the effects of various sewing parameters. Design/methodology/approach – In order to design the ANN and MLR models, four parameters including fabric weight, number of fabric layers, weave pattern, and sewing needle size are taken into account as the input parameters and NPF as the output parameter. According to these parameters, 140 samples of data were resulted. Each sample was tested five times. From these 140 data (input-output data pairs), 112 were used for training the ANN and MLR models and 28 samples were used to test the performance of ANN and MLR. Also, the NPF was measured on the Instron tensile tester to simulate sewing process. Findings – The results indicated that the NPF in denim fabrics can be well predicted in terms of sewing parameters by using ANN and MLR models, in which the ANN model exhibits greater performance than MLR (RANN=0.989> RMLR=0.901). Research limitations/implications – The NPF measurement method is limited at low speed. Originality/value – Using the ANN model for forecasting NPF in denim fabrics can help the garment manufactures to produce high-quality denim products and improve the sewing process through reducing seam damage. The NPF could be also measured in the cycle loading conditions similar to sewing machine process by using a special designed tools mounted on the Instron tensile tester.

Background: Nowadays, forecasting models based on nonparametric models have been developed in many branches of science such as mathematics and economics. However, the relatively complicated structure of these models has made them less practical in medical sciences. Objectives: In this study, we investigated the application of a nonparametric regression model to predict the psychological symptoms appearing six months after mild traumatic brain injury. We also made a comparison between the performance of nonparametric regression and artificial neural network models in predicting the psychological symptoms. Methods: In a six-month period during 2015 - 2017, information of 100 mild traumatic patients was included in a prospective cohort study. The data were then divided randomly into two groups of training (n = 50) and testing (n = 50) for 100 times. In the training group, the focus was on 100 artificial neural network and nonparametric regression models. However, in the testing group, a comparison was made between the values obtained using the two final models. To compare the models, the ROC curve and the accuracy rate were finally applied. Results: According to the obtained results, the nonparametric regression model showed an accuracy rate of 91.25% while the neural network model had an accuracy rate of 85.34%. In the experimental set for both neural network and nonparametric regression models, the area under the ROC curve appeared to be 81.51% and 85.73 %, respectively. Conclusions: The nonparametric regression model appeared to be more powerful than the neural network model in predicting psychological symptoms.

این مطالعه به منظور بررسی پیش بینی شاخص های عملکرد تولیدی در مرغان تخم گذار با استفاده از شبکه های عصبی مصنوعی و رگرسیون غیرخطی چندگانه انجام شد. بررسی بر روی اطلاعات چهار دوره متوالی پرورش در یک واحد پرورش مرغ تخم گذار صورت گرفت. روش های داده-کاوی شامل رگرسیون خطی و غیر خطی، شبکه عصبی پرسپترون سه لایه، شبکه عصبی پرسپترون چهار لایه و شبکه عصبی با تابع پایه ای شعاعی بود. در این مدل ها از متغیرهای سن گله، میزان خوراک مصرفی و فصل تولید به عنوان متغیر پیشگو و شاخص های عملکرد تولیدی شامل درصد تخم-گذاری، وزن توده ای تخم مرغ تولیدی و ضریب تبدیل غذایی به عنوان متغیر پاسخ استفاده شد. نتایج نهایی رگرسیون های خطی نشان داد که برای تمامی متغیرهای وابسته مورد مطالعه متغیر مستقل سن گله معنی دار می باشد. بنابراین رگرسیون غیر خطی شاخص های عملکرد تولیدی در مقابل سن برای مقایسه با شبکه های عصبی مختلف مورد بررسی قرار گرفت و برای مقایسه کلیه مدل ها از ضریب تعیین (R2) و میانگین قدر مطلق خطا (MAE) استفاده شد. نتایج نشان داد بین شبکه های عصبی مصنوعی مختلف مورد مطالعه، شبکه با تابع پایه ای شعاعی بهتر از سایر مدل های در پیش‌بینی شاخص های عملکرد تولیدی مرغان تخم گذار عمل می کند.

Different chemical attributes, measured via total soluble solids (TSS), acidity, vitamin C (VitC), total sugars (Tsugar), and reducing sugars (Rsugar), were determined for three groups of citrus fruits (i.e., orange, mandarin, and acid); each group contains two cultivars. Artificial neural network (ANN) and multiple linear regression (MLR) models were developed for TSS, acidity, VitC, Tsugar, and Rsugar from fresh citrus fruits by applying different independent variables, namely the dimensions of the fruits (length (FL) and diameter (FD)), fruit weight (FW), yield/tree, and soil electrical conductivity (EC). The results of ANN application showed that a feed-forward back-propagation network type with four input neurons (Yield/tree, FW, FL, and FD) and eight neurons in one hidden layer provided successful modeling efficiencies for TSS, acidity, VitC, Tsugar, and Rsugar. The effect of the EC variable was not significant. The hyperbolic tangent of both the hidden layer and the output layer of the developed ANN model was chosen as the activation function. Based on statistical criteria, the ANN developed in this study performed better than the MLR model in predicting the chemical attributes of fresh citrus fruits. The root mean square error of TSS, acidity, VitC, Tsugar, and Rsugar ranged from 0.064 to 0.453 and 0.068 to 0.634, respectively, for the ANN model, and 0.568 to 4.768 and 0.550 to 4.830, respectively, for the MLR model using training and testing datasets. In addition, the relative errors obtained through the ANN approach provided high model predictability and feasibility. In chemical attribute modeling, the FD and FL variables exhibited high contribution ratios, resulting in a reliable predictive model. The developed ANN model generally showed a good level of accuracy when estimating the chemical attributes of fresh citrus fruit.

Changes on the CIELab values of the dyed materials after the different chemical finishing treatments using artificial neural network (ANN) and linear regression (LR) models have been predicted. The whole structural properties of fabrics and some process data which were from fiber to the finishing parameters were accepted as inputs in these models. The networks having different structures were established, and it was also focus on the parameters which could affect the performance of the established networks. It was determined that we could successfully predict the color differences values occurring on the material after the finishing applications. In addition, we realized that some ANN parameters affected the prediction performance while establishing the models. After training ANN models, the prediction of the color difference values was also tried by linear regression models. Then, extra ANN models were established for all outputs using the parameters as inputs in the LR equations, and the prediction performances of both established models were compared. According to the results, the neural network model gives a more accurate prediction performance than the LR models.

With continual changes made and reviews of the exchange rate regime of Solomon Islands it is imperative that a proper forecasting modelling tool is established. The use of neural network models in exchange rate forecasting has received much attention in recent research. In this paper we propose an artificial neural network (ANN) model for forecasting exchange rates of the Solomon Islands dollar (SBD) against Euro (EUR). We use daily exchange rate data during the period of January 5, 1998 to June 30, 2014. The proposed model is compared with a naive method as a benchmarked method. Further, it is compared with single exponential smoothing; double exponential smoothing with trend; and Holt-Winter multiplicative and additive seasonal and multiple linear regression models. The performance of the models was measured by using various error functions such as root mean square error, mean absolute error, and mean absolute percentage error. The validation tests of the models were also carried out using different goodness of fit measures such as R-square, bias and tracking signal. The empirical result reveals that the proposed model is an efficient tool for forecasting SBD against Euro more accurately than are regression and time series models.

Background: Data mining (DM) is an approach used in extracting valuable information from environmental processes. This research depicts a DM approach used in extracting some information from influent and effluent wastewater characteristic data of a waste stabilization pond (WSP) in Birjand, a city in Eastern Iran. Methods: Multiple regression (MR) and neural network (NN) models were examined using influent characteristics (pH, Biochemical oxygen demand [BOD 5 ], temperature, chemical oxygen demand [COD], total suspended solids [TSS], total dissolved solid [TDS], electrical conductivity [EC] and turbidity) as the regression input vectors. Models were adjusted to input attributes, effluent BOD 5 (BODout) and COD (CODout). The models performances were estimated by 10-fold external cross-validation. An internal 5-fold cross-validation was also used for the training data set in NN model. The models were compared using regression error characteristic (REC) plot and other statistical measures such as relative absolute error (RAE). Sensitivity analysis was also applied to extract useful knowledge from NN model. Results: NN models (with RAE = 78.71 ± 1.16 for BODout and 83.67 ± 1.35 for CODout) and MR models (with RAE = 84.40% ± 1.07 for BODout and 88.07 ± 0.80 for CODout) indicate different performances and the former was better (P < 0.05) for the prediction of both effluent BOD 5 and COD parameters. For the prediction of CODout the NN model with hidden layer size (H) = 4 and decay factor = 0.75 ± 0.03 presented the best predictive results. For BODout the H and decay factor were found to be 4 and 0.73 ± 0.03, respectively. TDS was found as the most descriptive influent wastewater characteristics for the prediction of the WSP performance. The REC plots confirmed the NN model performance superiority for both BOD and COD effluent prediction. Conclusion: Modeling the performance of WSP systems using NN models along with sensitivity analysis can offer better understanding on exploring the most significant parameters for the prediction of system performance. The findings of this study could build the foundation for prospective work on the characterization of WSP operations and optimization of their performances with a view to conducting statistical approaches.

Estimating olive (Olea europaea L.) leaf area is an important aspect of monitoring plant health and evaluating growth processes in agriculture. Accurate estimation of leaf area allows for a better understanding of processes such as water and nutrient utilization, photosynthesis efficiency, respiration, and yield potential. This study aims to determine the most accurate, easy, and reliable leaf area estimation model using the geometric properties (length and width) of olive leaves. Additionally, the predictive performances of multiple linear regression (MLR) and artificial neural network (ANN) were compared. A total of 1320 leaf samples collected from 22 olive cultivars were used in the study. Leaf length and width were taken as input parameters, and both MLR and ANN models were developed for each cultivar. Both multiple linear regression (MLR) and artificial neural network (ANN) models demonstrated high predictive accuracy for olive leaf area estimation across 22 cultivars. The MLR models explained up to 96% of the variation in leaf area using leaf length (LL) and leaf width (LW), with low root mean square errors, indicating strong reliability. When cultivar identity was modeled as a categorical factor through dummy encoding, the model captured significant cultivar-specific effects without altering the overall predictive performance. The ANN models achieved slightly higher accuracy, with determination coefficients exceeding 0.99 and minimal prediction errors, confirming their superior ability to model nonlinear relationships. Across both approaches, leaf width contributed more strongly to leaf area than leaf length. Cultivar-specific differences were statistically significant for only a few genotypes, while most cultivars exhibited comparable patterns after adjustment for multiple testing. In conclusion, both MLR and ANN models demonstrated high accuracy in predicting olive leaf area, with ANN models showing slightly superior performance. However, MLR models also yielded highly reliable results, indicating that both approaches are viable for practical applications in olive cultivation. These predictive models can be effectively used for rapid, non-destructive phenotyping, growth monitoring, and precision management in olive breeding and production systems.

Water is considered as an essential commodity in human society. It has been observed that the basic standard of living of any Country can be measure through the effective portable water supply for consumption, sanitation and hygiene for the citizen. Its production and supply in the Federal Capital Territory (FCT), Abuja, Nigeria is a challenge, as dominant percentages of lower- class workforce live outside the FCTWB existing water network, and depend on borehole or tanker for water. The demand on the water supply system in FCT, Abuja has exceeded its initial design population, and the system is incomplete and operating with only 720 million liter of water per day (MLD) functioning plant. On this basis, this study seeks to identify the best model that fit daily water supply data in FCT, Abuja and to forecast the future daily water supply in this area. The comparing models were artificial neural, multiple linear and non-linear regression model were applied to the data set of daily water production, daily water treated, daily water supply, daily water leakage, Number of household connected to Federal Capital Territory Water board water network, Number of Commercial area connected to Federal Capital Territory Water board water network, and the Estimated population of Federal Capital Territory ,Abuja from (2013 to 2020), and it was emerged that the most adequate model for the data was Multiple linear regression model (MLR), with (R2 =1.000), (RMSE = 0.00282), and (MAE = 6.540). Artificial neural network records the high value of (RMSE = 432.4321), (MAE = 549.444) and (R2 =0.921), and multiple nonlinear regression record the highest value of (RMSE = 806.687), (MAE = 666.421) and (R2 = 0.999). From the statistical measure of goodness of fit, the three models compared results indicate that MLR model forecast are closely matching with actual observations values, artificial neural network model over-forecast some days volume of daily water supply by FCTWB, cooperation and multiple nonlinear regression model under-forecast some days volume of daily water supply by FCTWB, corporation. The three models compared depicts the influential variables of FCTWB Corporation daily water supply, (ANN = DWP, DWT), (MLR = DWT, DWL) and (MNLR = DWP, DWL), and their forecast graphs shows downward daily water supply in FCT, Abuja. It is recommended that the FCT, Abuja water Board Corporation should consider multiple linear regression (MLR) model and its forecasted values as a road map in its operations and planning toward water supply sustainability in FCT, Abuja.

The applicability of artificial neural networks (ANNs) and the adaptive neuro-fuzzy inference system (ANFIS) for determination of mean velocity and discharge of natural streams is investigated. The 2,184 field data obtained from four different sites on the Sarimsakli and Sosun streams in central Turkey were used in the study. ANNs and ANFIS models use the inputs, water surface velocity and water surface slope, to estimate the mean velocity and discharges of natural streams. The accuracies of both models were compared with the multiple-linear regression (MLR) model. The comparison results showed that the ANFIS model performed better than the ANNs and regression models for estimating mean velocity and discharge. The ANN model also showed better accuracy than the MLR model. The root mean square errors (RMSE) and mean absolute relative errors (MARE) of the MLR model were reduced by 88 and 91 % using the ANFIS model in estimating discharges, respectively. It is found that the optimal ANFIS model with RMSE of 0,063, MARE of 3,47 and determination coefficient (R2) of 0,996 in the test period is superior in estimation of discharge than the MLR model with RMSE of 0,532, MARE of 38,9 and R2 of 0,776, respectively. The study reveals that the ANFIS technique can be successfully used for estimating the mean velocity and discharge of natural streams by using only the inputs of water surface velocity and water surface slope.

Artificial neural network and regression coupled genetic algorithm to optimize parameters for enhanced xylitol production by Debaryomyces nepalensis in bioreactor

Analysis of surface ozone using a recurrent neural network