Next Viewpoint Recommendation by Pose Ambiguity Minimization for Accurate Object Pose Estimation

The next generation of service robots is to offer services relying heavily on visually guided manipulation, besides navigation, such services as errand, logistics, appliance, home keeping, etc. For the successful introduction of these services, it is critical to establish the consumer-level dependability in 3D object recognition and pose estimation in a natural setting where a large variation of environment, e.g., perspective, texture, form factor, illumination, occlusion, etc., is common. To address this problem, we propose an approach of the two-layered particle filter to the dependability in 3D object recognition and pose estimation. In the upper layer, a set of object pose candidates is identified and maintained in the search space as a set of super-particles, each of which is assigned a probability of the true pose and evolved in time along with the accumulation of further evidences. To define the object pose candidates, first, we acquire initially weak evidences quickly and interpret them in terms of possible object poses in space. These interpretations serve as the region of interest for detailed investigation by which the pose probabilities are computed for individual interpretations based on the likelihood and unlikelihood of various features available in the corresponding regions of interest. During the process of probability computation, we select the object pose candidates to be used as super-particles in the upper layer. In the lower level, the pose uncertainties associated with the individual candidates are represented as particles that are subject to the propagation in time. Finally, the experimental results support the strength of the proposed approach in the real environment in terms of its dependability in 3D object recognition and pose estimation.

With the advancement of intelligent manufacturing, robots are increasingly involved in industrial production, for example, replacing human beings to identify and manipulate objects. However, it is still a challenging task for object recognition and pose estimation in industrial environment, especially under large environmental noise, mutual occlusions and high-speed requirements. In this paper, we propose a new method for 6D object pose estimation, Super Key 4-Points Congruent Sets (SK-4PCS), which is a fast global method combined with local features. The proposed method includes three steps. Firstly, the key points in 3D point clouds are extracted by local features, which are invariant with respect to rotation and translation. Secondly, the smart indexing scheme is used to realize the query of 4-points congruent sets globally. Finally, the coarse pose obtained quickly is further refined by the Iteration Closest Point algorithm (ICP) [1]. The proposed method is also compared with existing methods by the evaluation indicator Visible Surface Discrepancy (VSD) on the LINEMOD dataset [2]. The experimental results show that the refined SK-4PCS results in significant speedup and satisfactory accuracy in 6D object pose estimation.

In this paper, a novel global point cloud descriptor is proposed for reliable object recognition and pose estimation, which can be effectively applied to robot grasping operation. The viewpoint feature histogram (VFH) is widely used in three-dimensional (3D) object recognition and pose estimation in real scene obtained by depth sensor because of its recognition performance and computational efficiency. However, when the object has a mirrored structure, it is often difficult to distinguish the mirrored poses relative to the viewpoint using VFH. In order to solve this difficulty, this study presents an improved feature descriptor named orthogonal viewpoint feature histogram (OVFH), which contains two components: a surface shape component and an improved viewpoint direction component. The improved viewpoint component is calculated by the orthogonal vector of the viewpoint direction, which is obtained based on the reference frame estimated for the entire point cloud. The evaluation of OVFH using a publicly available data set indicates that it enhances the ability to distinguish between mirrored poses while ensuring object recognition performance. The proposed method uses OVFH to recognize and register objects in the database and obtains precise poses by using the iterative closest point (ICP) algorithm. The experimental results show that the proposed approach can be effectively applied to guide the robot to grasp objects with mirrored poses.

With the continuous development of computer technology and deep learning, object detection technology has received great attention in recent years. Especially on the problem of 3D object detection in AR field, a variety of novel algorithms are in bloom. However, these algorithms are either low precision or slow speed. Therefore, we propose an object detection and pose estimation method for AR Application, which is a model for 6D pose estimation of 3D object based on 2D object detection. In our model, we firstly input the 2D projection image of the 3D model into the improved RetinaNet model, and detect the coordinates of the vertex and center point of the object on the image. Then the coordinates on the image and the coordinates on the CAD are matched by point matching. Then, the EPnP improved by Perspective-n-Point (PnP) algorithm is used to complete the pose estimation of 3D object. Finally, we test the performance of our algorithm. The results show that our accuracy has reached the average level of the mainstream algorithms.KeywordsPose estimationObject detectionDeep learningConvolutional neural network

6D pose estimation is an important branch in the field of vision measurement, and is widely used in the fields of robotics, autonomous driving and reality augmentation. The latest research trend in 6D pose estimation is to train a deep neural network to directly predict the 2D projection position of the 3D keypoint from the image, establish the corresponding relationship, and finally use the perspective-n-point (PnP) algorithm to perform pose estimation. The current challenge of pose estimation is that when objects are textureless, occluded or scene-clutterd, the detection accuracy is reduced, and most of the existing algorithm models are large and cannot accommodate real-time requirements. In this paper, we introduce a densely connected feature pyramid network (DFPN) that can efficiently integrate and utilize features. We combine the cross-stage partial network (CSPNet) with DFPN to design a new network for 6D pose estimation, DFPN-6D, a new approach for 6D object pose estimation. DFPN-6D can efficiently and accurately handle objects with textureless, occluded and scene clutter and estimate their full 6D poses in a single shot. Furthermore, we propose a new confidence calculation method and loss function for object pose estimation, which can fully consider spatial information. Finally, we propose a novel augmentation method for direct 6D pose estimation approaches to improve performance and generalization ability in the case of occlusion, which is called 6D augmentation. Our approach achieves a new state-of-the-art accuracy of 98.06 and 87.09 in terms of the ADD(-S) metric on the Linemod dataset and Occluded-Linemod dataset, and our method also achieves the best result in terms of the different metric on the MULT-I dataset, BIN-P dataset and T-LESS dataset, respectively, while still running end-to-end at over 65 FPS. The experimental results demonstrate that our algorithm is robust to textureless materials and occlusion while running more efficiently than other methods. We also deploy our proposed method to a real robot to grasp and manipulate objects based on the estimated pose.

This work focuses on the problem of 6D pose estimation for novel objects when a reference 3D model or posed reference images are not available. While existing methods can estimate the precise 6D pose of objects, they heavily rely on curated CAD models or reference images, the preparation of which is a time-consuming and labor-intensive process. Moreover, in real-world scenarios, 3D models or reference images may not be available in advance and instant robot reaction is desired. In this work, we propose a novel framework named HIPPo, which eliminates the need for curated CAD models and reference images by harnessing image-to-3D priors from Diffusion Models, enabling model-free zero-shot 6D pose estimation. Specifically, we construct HIPPo Dreamer, a rapid image-to-mesh model built on a multiview Diffusion Model and a 3D reconstruction foundation model. Our HIPPo Dreamer can generate a 3D mesh of any unseen objects from a single glance in just a few seconds. Then, as more observations are acquired, we propose to continuously refine the diffusion prior mesh model by joint optimization of object geometry and appearance. This is achieved by a measurement-guided scheme that gradually replaces the plausible diffusion priors with more reliable online observations. Consequently, HIPPo can instantly estimate and track the 6D pose of a novel object and maintain a complete mesh for immediate robotic applications. Thorough experiments on various benchmarks show that HIPPo outperforms state-of-the-art methods in 6D object pose estimation when prior reference images are limited.

The 6D pose estimation of objects plays a crucial role in robot sorting technology. To simultaneously improve the accuracy and efficiency of pose estimation during the grasping process, this study proposes an innovative deep learning pose estimation method based on PVN3D. Specifically, this study deeply optimized the backbone network of the image extraction model, using dense connections and learnable grouped convolutions to improve model accuracy and reduce model complexity. At the same time, the core idea of convolutional neural networks is integrated into the point cloud feature extraction process, which uses dynamic convolution techniques to process point cloud features, making the processing of point cloud data more efficient and flexible. In addition, by introducing a parameter-free attention mechanism, the accuracy of the model has been further improved. Through extensive experimental verification on the publicly available LineMOD, YCB video datasets and other three core datasets under the BOP benchmark, the method proposed in this paper demonstrates significant advantages in both computational efficiency and estimation accuracy. It not only significantly improves the accuracy of pose estimation but also significantly enhances real-time performance.

Six degrees-of-freedom (6D) object pose estimation plays an important role in pattern recognition of fields such as robotics and augmented reality. However, there are issues with low accuracy and real-time performance of 6D object pose estimation in complex scenes. To address these challenges, in this article, RFF-PoseNet (a 6D object pose estimation network based on robust feature fusion) is proposed for complex scenes. Firstly, a more lightweight Ghost module is used to replace the convolutional blocks in the feature extraction network. Then, a pyramid pooling module is added to the semantic label branch of PoseCNN to fuse the features of different pooling layers and enhance the network’s ability to capture information about objects in complex scenes and the correlations between contextual information. Finally, a pose regression and optimization module is utilized to further improve object pose estimation in complex scenes. Simulation experiments conducted on the YCB-Video and Occlusion LineMOD datasets show that the RFF-PoseNet algorithm can strengthen the correlation of features between different levels and the recognition ability of unclear targets, thereby achieving excellent accuracy and real-time performance, as well as strong robustness.

Purpose Accurate 6D object pose estimation is essential for various robotic tasks. Uncertain pose estimates can lead to task failures; however, a certain degree of error in the pose estimates is often acceptable. This paper aims to enable the robots to make informed decisions by quantifying errors in the object pose estimate and acceptable errors for task success. Design/methodology/approach In this paper, the authors introduce a framework for evaluating robotic task success under object pose uncertainty, representing both the estimated error space of the object pose and the acceptable error space for task success using multi-modal non-parametric probability distributions. The proposed framework pre-computes the acceptable error space for task success using dynamic simulations and subsequently integrates the pre-computed acceptable error space over the estimated error space of the object pose to predict the likelihood of the task succes. Findings The authors evaluated the proposed framework on two mobile manipulation tasks. Their results show that by representing the estimated and the acceptable error space using multi-modal non-parametric distributions, the authors achieve higher task success rates and fewer failures. Research limitations/implications Their proposed framework is generic and can be applied to a wide range of robotic tasks requiring object pose estimation. Hence, given the recent advancements in object pose uncertainty estimation and dynamic simulations, the proposed framework, in conjunction with these advancements, has the potential to enable robots to make reliable and informed decisions under pose uncertainty. Originality/value Unlike related works that model both acceptable error space and estimated error space using parametric uni-modal distributions, the authors model them as multi-modal distributions which is often the case in the real world.

Enabling robots to automatically locate and pick up randomly placed and oriented objects from a bin is an important challenge in factory automation, replacing tedious and heavy manual labor. A system should be able to recognize and locate objects with a predefined shape and estimate the position with the precision necessary for a gripping robot to pick it up. We describe a system that consists of a structured light instrument for capturing 3D data and a robust approach for object location and pose estimation. The method does not depend on segmentation of range images, but instead searches through pairs of 2D manifolds to localize candidates for object match. This leads to an algorithm that is not very sensitive to scene complexity or the number of objects in the scene. Furthermore, the strategy for candidate search is easily reconfigurable to arbitrary objects. Experiments reported in this paper show the utility of the method on a general random bin picking problem, in this paper exemplified by localization of car parts with random position and orientation. Full pose estimation is done in less than 380 ms per image. We believe that the method is applicable for a wide range of industrial automation problems where precise localization of 3D objects in a scene is needed.

In this paper, we present a system for automatic object detection and pose estimation from a single depth map containing multiple objects for bin-picking applications. The proposed object detection algorithm is based on matching the keypoints extracted from the depth image by using the RANSAC algorithm with the spin image descriptor. In the proposed system, we combine the keypoint detection and the RANSAC algorithm to detect the objects, followed by the ICP algorithm to refine the 3D pose estimation. In addition, we implement the proposed algorithm on the GPGPU platform to speed-up the computation. Experimental results on simulated depth data are shown to demonstrate the proposed system.

In this paper, we present an ANN hybrid ensemble scheme for simultaneous object recognition and pose estimation from 2D multiple-view image sequence, and realized human vision simulation within an intelligent machine. Based on the notion of similarity measure at various metrics, the paradox between information simplicity and accuracy is balanced by a model view generation procedure. An ANN hierarchical hybrid ensemble framework, much like a decision tree, is then set up, with multiple weights and radial basis function neural networks respectively employed for different tasks. The strategy adopted not only determines object identity by spatial geometrical cognition and omnidirectional accumulation through connectivity, but also assigns an initial pose estimation on a viewing sphere in a coarse to fine process. Simulation experiment has achieved encouraging results, proved the approach effective, superior and feasible in large-scale database and parallel computation.KeywordsObject RecognitionRadial Basis Function Neural NetworkModel ViewObject NodeInformation SimplicityThese keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

6D object pose estimation is a longstanding computer vision problem. Existing deep learning-based methods have achieved inspiring results in this task. However, large-scale training data with annotations is extremely needed to guarantee these methods’ performance, and acquiring real 6D object pose annotations is fairly labor-intensive and time-consuming. To overcome this drawback, we propose a semi-supervised pose estimation method using labeled synthetic data and unlabeled real data. For unlabeled real data, we form a self-supervised pipeline by minimizing the distance between the input point cloud, which is under ground-truth pose, and the model points transformed based on predicted pose. The labeled synthetic data is used to supervise the network to converge correctly. And we utilize a feature mapping to eliminate the domain gap between the real and synthetic features to further enhance the network’s performance. Moreover, we propose an attention-based pose estimation network, which can concentrate more on the distinguishing features, thus improving the accuracy of pose estimation. Experiments show that our proposed semi-supervised method is able to achieve good performance without the real annotations and outperforms all other methods relying on synthetic data or self-supervision strategy, indicating that the proposed method is effective.

Pose estimation of a three-dimensional (3D) rigid object based on monocular vision is a fundamental problem in computer vision. Existing methods usually presume that there is a certain feature projection correspondence available a priori between the input image and object's 3D model, which substantially reduces the mathematical complexity of the problem. However, in actual applications this presumption rarely holds. How to estimate the pose of a general 3D object with no feature projection correspondence available a priori is still not well resolved. In this study, the authors propose a new 3D rigid object pose estimation method based on object's contour and non-Euclidean multi-feature distance map, which solves both the pose estimation problem and the feature projection correspondence problem simultaneously and iteratively. Experiment results show that our method also has good performance in convergence speed, convergence radius and noise robustness.

In production line, pose estimation of 3D object of products is needed beforehand. In order to perform shape measurement of the objects corresponding to speed of the mass production lines before the contact measurement is done, the information of object pose and matching is become required. In this paper, we conducted a study on the performance of model based and view based pose estimation method using image sequence of a rotating 3D object. In model based, we used object feature points from center of gravity and in view based method, the subspace calculation by block diagonalization of matrix represents a transformation an image to another image. We have confirmed the both method performance and it’s considered useful for pose estimation.