NOE TS fuzzy modelling of nonlinear dynamic systems with uncertainties using symbolic interval-valued data

On Identifying Envelop Type Nonlinear Output Error Takagi-Sugeno Fuzzy Models for Dynamic Systems with Uncertainties

Multi-scale fuzzy modeling of multivariable discrete-time nonlinear dynamical systems is approached analytically in this paper. The underlying idea of this approach is to introduce the idea of multi-scale fuzzy quantization. More globally supported membership functions are used at coarser scales to capture global characteristics of the unknown system, whereas more locally supported membership functions are used at finer scales to fill in the local features. Starting from the coarsest scale down to finer ones, a projection method is used to extract a partial fuzzy-model (in terms of fuzzy membership functions and fuzzy rules) from the residual of the system at each scale until the residual drops below a prescribed modeling error bound. The multi-scale fuzzy model is then obtained by assembling the partial fuzzy models together. To reach a near optimal fuzzy model, a rule reduction technique has also been developed to delete some fuzzy rules. An illustrative example is used to demonstrate the effectiveness of the scheme.

The problem of creating mathematical models of nonlinear dynamical systems does not have an unambiguous solution and requires the creation of a separate synthesis method for each such object. To develop a method for synthesizing mathematical models of an extensive class of nonlinear dynamical systems with polynomial nonlinearities. The work uses a method based on the solution of the Volterra integral equation in the ideology set forth in Van Trees H.L., according to which the structure of a nonlinear dynamical object present47s a series connection of the linear part, characterizing the inertial properties of the system, and the nonlinear element, given by static characteristic. The difference of the suggested version of the method from the classical one, proposed in the works of Van Trees H.L., is an expansion of their input and output signals into Fourier series and a representation of the inertial part of these systems by their Bode plots, connected into one structure with input and output signals and non-linearity by Volterra integral equation. The algorithm of the proposed method is disclosed by the example of solving the problem of identifying a nonlinear dynamical system which impulse response of the inertial part satisfies the separability requirement, the order of the polynomial nonlinearity is three, and the model of the input signal has the form of a sinusoid "raised" over the time axis on a priori given constant level. A computational experiment was carried out on the example of nonlinear dynamical systems with the third order of the nonlinear characteristic and the first and second orders of the model of the inertial part of these systems with the specified algorithms of their parametric identification. The suggested method allows to synthesis the mathematical model of a nonlinear dynamical system with the polynomial static characteristic to the case when the input signal has an arbitrary number of harmonics, and the model of the inertial part and the nonlinear polynomial function have an arbitrary order.

In this paper, the Takagi-Sugeno (TS) fuzzy modelling and the fuzzy regulation theory are considered in order to design a fuzzy controller capable of taking the output of a fuzzy plant to the reference signal generated by an external system. It is well-known that TS fuzzy modelling allows the stabilizer to be obtained by means of numerical techniques. As a result, stability region defined by the fuzzy stabilizer is larger than the one obtained when a simple linear stabilizer is considered. On the other hand, a fuzzy regulator constructed from linear controllers does not solve the exact regulation problem in general [6], [12], [13], [15]. Therefore, a fully nonlinear regulator, defined on the overall TS fuzzy model, is considered in this work. The results are applied on a simple fuzzy model in order to illustrate the improvement achieved with the proposed approach.

This paper presents a new fuzzy inference system for modeling of nonlinear dynamic systems based on input and output data with measurement noise. The proposed fuzzy system has a number of fuzzy rules and parameter values of membership functions which are automatically generated using the extended relevance vector machine (RVM). The RVM has a probabilistic Bayesian learning framework and has good generalization capability. The RVM consists of the sum of product of weight and kernel function which projects input space into high dimensional feature space. The structure of proposed fuzzy system is same as that of the Takagi-Sugeno fuzzy model. However, in the proposed method, the number of fuzzy rules can be reduced under the process of optimizing a marginal likelihood by adjusting parameter values of kernel functions using the gradient ascent method. After a fuzzy system is determined, coefficients in consequent part are found by the least square method. Examples illustrate effectiveness of the proposed new fuzzy inference system.

The dynamic model of a Human Operator (HO) inherits not only nonlinear dynamics but also a large amount of uncertainty due to the reaction time and expertize level of humans. In this study, the Interval valued Takagi-Sugeno (TS) fuzzy modelling approach is employed to efficiently capture the dynamics of HOs. For this purpose, we have conducted experimental studies in which a simple target tracking computer game is used as a platform. We have collected input-output data from individual players that have different talent levels. Then, by using symbolic data analysis, we have obtained interval valued TS fuzzy models of the HOs and evaluated their performances. It is concluded that, via the interval-valued TS fuzzy modelling approach, HOs can be modelled successfully as the predicted upper and lower bounds can successfully envelope the uncertainties and nonlinearities of HOs.

This paper proposes new algorithms based on the fuzzy c-regressing model algorithm for Takagi-Sugeno (T-S) fuzzy modeling of the complex nonlinear systems. A fuzzy c-regression state model (FCRSM) algorithm is a T-S fuzzy model in which the functional antecedent and the state-space-model-type consequent are considered with the available input-output data. The antecedent and consequent forms of the proposed FCRSM consists mainly of two advantages: one is that the FCRSM has low computation load due to only one input variable is considered in the antecedent part; another is that the unknown system can be modeled to not only the polynomial form but also the state-space form. Moreover, the FCRSM can be extended to FCRSM-ND and FCRSM-Free algorithms. An algorithm FCRSM-ND is presented to find the T-S fuzzy state-space model of the nonlinear system when the input-output data cannot be precollected and an assumed effective controller is available. In the practical applications, the mathematical model of controller may be hard to be obtained. In this case, an online tuning algorithm, FCRSM-FREE, is designed such that the parameters of a T-S fuzzy controller and the T-S fuzzy state model of an unknown system can be online tuned simultaneously. Four numerical simulations are given to demonstrate the effectiveness of the proposed approach.

Takagi-Sugeno (TS) fuzzy models have been the popular choice for multi-model based nonlinear system identification for controller design. However, the interpretation of the model from a dynamical systems point of view is still unclear. In this paper, we investigate the interpretation of the TS fuzzy models in terms of local dynamics of nonlinear systems in state space. The investigation is based on the comparison between the constant-affine recursive i/o equation and constant-affine state space representations. We show that the true local dynamics is not identifiable by TS fuzzy models by analysis and example. For the identification of constant-affine state space models, a subspace identification algorithm is proposed to identify the true local dynamics with zero initial conditions.

The paper proposes a new method for identifying orders of input-output models for unknown nonlinear dynamic systems. The approach is based on the continuity property of the nonlinear functions which represent input-output models of continuous dynamic systems. The approach does not depend on any nonlinear function approximation methods and solely depends on the system's input-output data measured in experiments. By evaluating the modification of an index which is defined as Lipschitz number with the successive modification of model orders, the appropriate model orders can be determined simply and reliably. Theoretical background of the present approach is discussed. Several examples from chaotic dynamic systems, nonlinear plant models are presented to demonstrate the effectiveness of the present method.

The paper presents a review of the studies that were conducted at Energy Systems Institute (ESI) SB RAS in the field of mathematical modeling of nonlinear input-output dynamic systems with Volterra polynomials. The first part presents an original approach to identification of the Volterra kernels. The approach is based on setting special multi-parameter families of piecewise constant test input signals. It also includes a description of the respective software; presents illustrative calculations on the example of a reference dynamic system as well as results of computer modeling of real heat exchange processes. The second part of the review is devoted to the Volterra polynomial equations of the first kind. Studies of such equations were pioneered and have been carried out in the past decade by the laboratory of ill-posed problems at ESI SB RAS. A special focus in the paper is made on the importance of the Lambert function for the theory of these equations.

Fuzzy models within orthonormal basis function framework (OBF Fuzzy Models) have been introduced in previous works and shown to be a very promising approach to the areas of non-linear system identification and control since they exhibit several advantages over those dynamic model topologies usually adopted in the literature. In the present paper, it is demonstrated that the OBF Takagi-Sugeno fuzzy models previously introduced by the authors are particular realizations of a more general and interpretable formulation presented here, while being able to approximate to desired accuracy a wide class of non-linear dynamic systems. In addition, a predictive control scheme based on the linearization of these models is applied to the control of a polymerization reactor.

Conducting polymer actuators are used in a diverse range of applications including biomimetic robots and biomedical devices. In comparison to robotic joints, they do not have friction or backlash, but on the other hand, they have complicated electro-chemo-mechanical dynamics which makes modelling and control of the actuator really difficult. In addition they also have the disadvantages of creep, hysteresis, and highly uncertain and time-varying dynamics. In this paper a Takagi-Sugeno (T-S) fuzzy model is used to represent the uncertain dynamics of the actuator, and the resulted fuzzy model is validated using experimental data. A system that consists of fuzzy state feedback to a PI controller is designed on the basis of the obtained T-S fuzzy model using the parallel distributed compensation scheme. The sufficient conditions for the existence of such a controller are derived in terms of linear matrix inequalities. The obtained results show that the designed controller can achieve a good control performance despite the existence of uncertain actuator dynamics.

In this paper, optimal fuzzy observer is developed for discrete time nonlinear stochastic system based on Takagi-Sugeno (TS) fuzzy model. We design a optimal fuzzy observer using the mathematical duality and by extending the nonlinear Bayesian estimation using Gaussian sum approach to the TS fuzzy model.

Takagi-Sugeno (T-S) fuzzy model is a system described by a set of fuzzy if-then rules which give local linear representations of the underlying nonlinear system. Usually, a fuzzy control law is constructed by a set of controllers for each local linear representation to carry out the control of a T-S fuzzy system. While, simultaneous control addresses the stability and performance of multiple plants under a single feedback controller. In this paper, simultaneous linear control for nonlinear uncertain systems described by general T-S fuzzy model is considered. A procedure for simultaneous control of T-S fuzzy systems with parametric uncertainties is presented, by which robust reliability method is adopted to deal with uncertainties. Simultaneously linear controller design for an uncertain T-S fuzzy system is carried out by solving a problem of robust reliability based optimization, in which, both the robustness with respect to uncertainties and the control cost can be taken into account simultaneously. It is demonstrated by numerical simulation of the chaotic Lorenz system control that the presented method is effective and feasible.

This paper addresses the issue of tracking the output of an activated sludge process using fuzzy integral control. First, the dynamics of the nonlinear process are modeled with a dynamic state space fuzzy model integrating the effect of external disturbances, and then an additional integral state of the output tracking error is introduced to obtain an augmented Takagi-Sugeno (TS) fuzzy model. The TS fuzzy model is able to describe the dynamics of complex nonlinear systems with an excellent degree of accuracy. It is formulated by fuzzy if-then rules which can give local linear representation of the overall nonlinear system. Second, the design of the fuzzy integral control is performed, in which the state feedback gains are obtained by solving linear matrix inequalities (LMI). The objective is to ensure trajectory tracking of an activated sludge process (ASP) by controlling two key variables: the substrate concentration and the level of dissolved oxygen. To assess the performance of the proposed control strategy, a comparative analysis is carried out with a gain scheduling PI (GS-PI) controller. Simulation results are provided to illustrate the effectiveness of the proposed approach. Where, the fuzzy integral control reduces the high energy consumption in water treatment plants.