Novel concepts and techniques in capillary electrochromatography

Chiral drugs exert pharmacological effects through strict matching with chiral biological macromolecules and chiral recognition. Each enantiomer has different pharmacological activities, metabolic processes and rates, as well as toxicity pharmacokinetic characteristics owing to the difference in its interactions with the chiral environment. Therefore, method development for the resolution of chiral drugs is of great significance for the synthesis of chiral drugs and for quality control during the production process. Molecularly imprinted polymers (MIPs) are prepared by using a target molecule as the template. MIPs demonstrate highly specific recognition properties toward the target molecule since they have specific spatial molecular structures and functional groups. Hence, MIPs are particularly suitable for the separation and purification of chiral drugs. Capillary electrochromatography (CEC) offers the advantages of high separation efficiency and high selectivity owing to the dual separation mechanisms including capillary electrophoresis and liquid chromatography. By using MIPs as the stationary phases for CEC, the advantages of the two technologies can be combined to achieve efficient separation of chiral drugs. MIPs were first applied to CEC for chiral resolution in 1994, and since then, there have been notable advances in this field. The four main chiral separation modes in CEC involve the use of MIPs as the stationary phases of open tubular, packed, and monolithic columns, and as the pseudostationary phase in the separation medium. This review summarizes the research progress of these four methods and reveals the potential of MIPs in chiral resolution by CEC. The advantages and disadvantages of these methods are commented. MIPs as the stationary phases of packed columns can allow for chiral separation. However, the preparation of packed columns in narrow capillaries is difficult. In addition, frits must be prepared at the ends of the capillaries to seal the MIPs. The frits lead to the formation of bubbles during the CEC analysis, thus resulting in poor repeatability and stability. These problems can be overcome by using MIP-based open tubular columns. Furthermore, conditioning of open tubular columns is easy and less time-consuming. However, open tubular columns have limited capacity. MIP-based monolithic columns have greater capacity than do open tubular columns, and frits are not required in this case. However, in situ preparation of MIPs monolith in narrow capillaries is still challenging. The application of MIPs to chiral CEC can also be realized by using them as pseudostationary phases (additives) in the separation medium, and this allows for ease of operation. Moreover, the amount of MIPs introduced into the capillary can be accurately controlled. Thus, the batch-to-batch reproducibility can be improved, but this has the disadvantage of increased MIP consumption. In order to further expand the potential of MIPs in chiral CEC, the following aspects must be considered. First, improvement of the preparation method. In most reported MIP-based-chiral CEC techniques, the peaks of the imprinted molecules show severe tailing, and this problem must be resolved. Improving the mass transfer rate of the prepared MIPs may be a suitable solution in this regard. Second, development of new functional monomers. A functional monomer is an indispensable component in the preparation of MIPs. New functional monomers can be prepared according to the "three-point interaction" rule. Third, selection of template molecules. A single enantiomer of chiral drugs is used as the template molecule to prepare chiral MIPs. The method is not suitable for the preparation of MIPs of chiral drugs for which a single enantiomer is difficult to obtain. Therefore, appropriate choice of the template molecules for these drugs is imperative. Fourth, discussion of chiral separation mechanism. The mechanism of interaction between the template molecules and MIPs needs to be explored further, in order to obtain theoretical guidance for the design and preparation of chiral MIPs.

Combining capillary electromigration with molecular imprinting techniques towards an optimal separation and determination

Molecularly imprinted polymers (MIPs) are tailor-made synthetic polymers with a predetermined selectivity for a given analyte, or group of structurally related compounds, that make them ideal materials for use as stationary phases in affinity chromatography. However, extensive peak broadening and tailing, especially of the more retained compound (normally the template) are often observed. Thus, huge efforts have been made during recent years to use MIPs in capillary electrochromatography, which is inherently a more efficient chromatographic technique than conventional HPLC. Accordingly, this paper gives an overview of the attempts carried out in the recent past to improve the chromatographic performance of MIPs in capillary electrochromatography as well as more recent applications. It is concluded that MIPs are very promising materials for use as selective stationary phases in CEC.

Replacing pressure-driven flow with electroosmotic flow in chromatography with packed capillary columns results in a new and powerful analytical technique, combining the advantages of high-performance liquid chromatography (HPLC) and capillary electrophoresis (CE): capillary electrochromatography (CEC). In essence, it involves packing CE capillaries with HPLC stationary phases and applying a voltage across the packed capillary, which generates an electroosmotic flow (EOF) that transports solutes along the capillary toward the detector; on the way, both differential partitioning and electrophoretic migration of the solutes occur, resulting in their separation. This dual separation mechanism can afford unique selectivities. Also, the plug-flow profile of EOF reduces flow-related band broadening, so that separation efficiencies of several hundred thousand plates per meter are often obtained (i.e., one or two orders of magnitude greater than those of present conventional chromatographic systems). There is no back pressure when EOF occurs, so small particle sizes (1–3 μm) and/or long columns can be used. Generally, carrier electrolytes containing high levels (40–80%) of organic solvents such as methanol or acetonitrile are employed, making it useful for water-insoluble compounds, which can be difficult to analyse by CE. CEC can be faster than HPLC, and gradient-elution CEC is being developed as an alternative to gradient-elution liquid chromatography of polymers.

Molecular imprinting is a powerful technique to form a synthetic polymer receptor with tailor-made binding sites. This article gives a short overview of the application of the principle of molecularly imprinted polymers (MIPs) in capillary electrochromatography (CEC). Some new developments of monolithic column and coating based on MIPs in CEC mode are presented. Lastly, the review also discusses their applications for separation of organic compounds and future perspectives in this field. Keywords: Molecularly imprinted polymers, Capillary electrochromatography, Monolithic column, Coating.

As a new generation of stationary phases, monolithic supports have attracted significant interest in high-performance liquid chromatography (HPLC) and capillary electrochromatography (CEC) because of their ease of preparation, high reproducibility, versatile surface chemistry and rapid mass transport. Molecularly imprinted polymers (MIPs) are synthetic materials with high specific recognition ability to template molecule. The combination of monolithic column and MIPs integrates the high efficiency of modern chromatography and the high selectivity provided by MIPs. This review focuses on the recent developments and applications of all kinds of monolithic matrix, i.e. organic polymer-based and silica-based MIP monolith in HPLC and CEC mode.

Capillary electrochromatography of proteins and peptides with porous-layer open-tubular columns

We describe capillary zone electrophoresis (CZE) with transient isotachophoresis (ITP) for the determination of low concentrations of nitrite and nitrate ions in seawater. Bromide-free artificial seawater was adopted as background electrolyte (BGE) to eliminate the interference of high concentrations of salts in seawater. To reverse the electroosmotic flow (EOF), 3 mM cetyltrimethylammonium chloride (CTAC) was added to the BGE. High concentrations of chlorate were added to sample solutions as the terminating ion to generate the ITP process before the CZE separation. In general, the stacking effect increased with increasing amounts of chlorate injected into the capillary. The limits of detection (LODs) for nitrite and nitrate were 0.063 and 0.033 mg/L when the chlorate concentration was 600 and 200 mM, respectively; these were half of those obtained by CZE without the transient ITP. The LODs were obtained at a signal to noise ratio (S/N) of 3. The relative standard deviations (RSD, n = 10) of the peak areas for these ions were 3.2 and 2.9%. The RSDs of peak heights for these ions were 1.6 and 2.1%. The RSDs of migration times for these ions were 0.67 and 0.46%.

Molecularly imprinted polymers based enrichment and separation for trace analysis in capillary electrophoresis.

Molecularly imprinted polymer dedicated to the extraction of glyphosate in natural waters

A new in-house designed and constructed injection valve for capillary electrochromatography (CEC) based on a rotating injection part with compartments for the eluent as well as for the sample has been coupled to a mass spectrometer via a sheath flow electrospray ionisation (ESI) interface, using short capillary columns of 15 cm length. The CEC columns were packed with 3 microm C(18) bonded silica particles, and a mixture of peptides was analysed using an ammonium acetate/acetonitrile eluent. A significant increase in the signal-to-noise ratio was obtained when the peptides were dissolved in water with the same content of organic modifier as in the eluent with an addition of 0.5% (v/v) acetic acid. When the CEC analysis was performed without any additional pressure, the separation current sometimes dropped tremendously due to bubble formation, caused by different permeability in the first and packed part of the column causing an extremely low electroosmotic flow. The separation current was restored to its original value by applying only 7 bar at the inlet of the CEC column, and the separation performance for the test peptides was recovered. A comparison of the CEC performance of peptides in pure CEC mode and in low-pressure CEC mode is reported.

Chapter 7 - Capillary electrophoresis and electrochromatography of carbohydrates

Study of on-line stacking procedures for analyzing marbofloxacin by capillary zone electrophoresis

Molecularly imprinted polymers (MIPs) are tailor‐made synthetic materials possessing specific cavities designed for a target molecule. They may constitute stationary phases for separation techniques that involve a retention mechanism based on molecular recognition. The physical and chemical properties of MIPs directly result from the procedure used for their synthesis, which is normally adapted to the application in question. This review describes the potential of MIPs in affinity chromatography, mainly for chiral separation using different techniques such as liquid chromatography or capillary electrochromatography. The great potential of MIPs as selective sorbents for solid‐phase extraction of target analytes from complex matrices is particularly highlighted.

Thein situdetection of organic molecules in space is key to understanding the variety and the distribution of the building blocks of life, and possibly the detection of extraterrestrial life itself. Gas chromatography mass spectrometry (GC-MS) has been the most sensitive analytical strategy for organic analyses in flight, and was used on missions from NASA's Viking, Phoenix, Curiosity missions to ESA's Rosetta space probe. While pyrolysis GC-MS revealed the first organics on Mars, this step alters or degrades certain fragile molecules that are excellent biosignatures including polypeptides, oligonucleotides and polysaccharides, rendering the intact precursors undetectable. We have identified a solution tailored to the detection of biopolymers and other biomarkers by the use of liquid-based capillary electrophoresis and electrochromatography. In this study, we show that a capillary electrochromatography approach using monolithic stationary phases with tailor-made surface chemistry can separate and identify various polycyclic aromatic hydrocarbons, nucleobases and aromatic acids that could be formed under astrophysically relevant conditions. In order to simulate flyby organic sample capture, we conducted hypervelocity impact experiments which consisted of accelerating peptide-soaked montmorillonite particles to a speed of 5.6 km s−1, and capturing them in an amorphous silica aerogel of 10 mg cm−3bulk density. Bulk peptide extraction from aerogel followed by capillary zone electrophoresis led to the detection of only two stereoisomeric peptide peaks. The recovery rates of each step of the extraction procedure after the hypervelocity impact suggest that major peptide loss occurred during the impact. Our study provides initial exploration of feasibility of this approach for capturing intact peptides, and subsequently detecting candidate biomolecules during flight missions that would be missed by GC-MS alone. As the monolith-based electrochromatography technology could be customized to detect specific classes of compounds as well as miniaturized, these results demonstrate the potential of the instrumentation for future astrobiology-related spaceflight missions.