Novel Frequency-Splitting SWIPT for Overcoming Amplifier Nonlinearity

Chapter 10 - Transmit beamforming for simultaneous wireless information and power transfer

A good alternative to extend the lifetime of wireless devices placed in remote locations is to be able to obtain energy through a technique generally called Simultaneous Wireless Information and Power Transfer (SWIPT). Furthermore, since relays are commonly used to expand the coverage of wireless systems, an interesting choice could be they also harvest energy for its operation. It is shown in this work that, taking advantage of known modulation formats and having available the Channel State information (CSI), it is possible to make the power transmission more efficient. Using a SWIPT scheme known as Time Switching (TS), a study is carried out to highlight novel improvements in energy efficiency and outage probability.

In this paper, we provide a comprehensive literature survey on simultaneous wireless information and power transfer (SWIPT) in multi-antenna systems. We first review recent contributions on the theory analysis of SWIPT from information theoretic standpoint and introduce the tradeoff between information transfer and power transfer under various settings. Then, we focus on the utilization of multi-antenna techniques to solve existing problems of SWIPT. Contributions on the implementation aspects of multi-antenna SWIPT are summarized. The performance of SWIPT is evaluated by different metrics, therefore, we review the works on dynamic SWIPT optimization based on objective function using multi-antenna techniques. In addition, the implementation of SWIPT brings up secure issue. Thus, we summarize recent works on secure SWIPT. Finally, we present researches combining SWIPT with state-of-the-art techniques due to potential application in different scenarios.

Radio frequency (RF) signals have been relied upon for both wireless information delivery and wireless charging to the massively deployed low-power Internet of Things (IoT) devices. Extensive efforts have been invested in physical layer and medium-access-control layer design for coordinating simultaneous wireless information and power transfer (SWIPT) in RF bands. Different from the existing works, we study the coding controlled SWIPT from the information theoretical perspective with practical transceiver. Due to its practical decoding implementation and its flexibility on the codeword structure, unary code is chosen for joint information and energy encoding. Wireless power transfer (WPT) performance in terms of energy harvested per binary sign and of battery overflow/underflow probability is maximised by optimising the codeword distribution of coded information source, while satisfying required wireless information transfer (WIT) performance in terms of mutual information. Furthermore, a Genetic Algorithm (GA) aided coding design is proposed to reduce the computational complexity. Numerical results characterise the SWIPT performance and validate the optimality of our proposed GA aided unary coding design.

5G-based green broadband communication system design with simultaneous wireless information and power transfer

Antenna beamforming for Simultaneous Wireless Information and Power Transfer (SWIPT) and Wireless Power Transfer (WPT) in an indoor 6G communication system is presented in this paper. The objective function is to maximize the total harvesting power for the SWIPT and WPT nodes with the constraints of the bit error rate and minimum harvesting power. In the study, the power-splitting ratio between harvesting power and decoding information can be adjusted for the SWIPT node. Due to the non-convex problem, we use Self-Adaptive Dynamic Differential Evolution (SADDE) to optimize the designed multi-objective function. We use a symmetric antenna array to study three situations of distance—closer, farther, and similar—between the transmitting antenna and the individual SWIPT and WPT nodes in this paper. Experimental results show that the overall harvesting efficiency is improved, especially in the case of SWIPT nodes closer to the transmitter. The total harvesting power can be improved by 86.7% in the total short-distance case, and by 7.87% in the total long-distance case.

The main challenges of sensing in harsh industrial and biological environments are the limited energy of sensor nodes and the difficulty of charging sensor nodes. Simultaneous wireless information and power transfer (SWIPT) is a non-invasive option to replenish energy. SWIPT harvests energy and decodes information from the same RF signal, which is influencing the design of a wireless sensor network. In multi-hop multi-flow wireless sensor networks, interference generally exists, and the interference has a different influence on SWIPT. Route, interference and SWIPT are dependent. However, existing works consider SWIPT link resource allocation with a given route or only select path for one flow without interference. Therefore, this paper firstly analyzes the influence of interference on SWIPT, and select the SWIPT routing with interference. We design an interference-based information and energy allocation model to maximize the link capacity with SWIPT. Then, we design an interference-aware route metric, formulate SWIPT routing problem, and design an interference-aware SWIPT routing algorithm. The simulation results show that as the number of flows increases, there is more likely to obtain performance gains from interference and SWIPT.

This paper studies a multi-hop decode-and-forward (DF) simultaneous wireless information and power transfer (SWIPT) system where a source sends data to a destination with the aid of multi-hop relays which do not depend on an external energy source. To this end, we apply power splitting (PS) based SWIPT relaying protocol so that the relays can harvest energy from the received signals from the previous hop to reliably forward the information of the source to the destination. We aim to solve two optimization problems relevant to our system model. First, we minimize the transmit power at the source under the individual quality-of-service (QoS) threshold constraints of the relays and the destination nodes by optimizing PS ratios at the relays. The second is to maximize the minimum system achievable rate by optimizing the PS ratio at each relay. Based on convex optimization techniques, the globally optimal PS ratio solution is obtained in closed-form for both problems. By setting the QoS threshold constraint the same for each node for the source transmit power problem, we discovered that either the minimum source transmit power or the maximum system throughput can be found using the same approach. Numerical results demonstrate the superiority of the proposed optimal SWIPT PS design over conventional fixed PS ratio schemes.

Far-field wireless power transfer (WPT) and simultaneous wireless information and power transfer (SWIPT) have become increasingly important in radio frequency (RF) and communication communities recently. The problem of modulation design for SWIPT has however been scarcely addressed. In this paper, a modulation scheme based on asymmetric phase-shift keying (PSK) is considered, which improves the SWIPT rate-energy tradeoff region significantly. The nonlinear rectifier model, which accurately models the energy harvester, is adopted for evaluating the output direct current (DC) power at the receiver. The harvested DC power is maximized under an average power constraint at the transmitter and a constraint on the rate of information transmitted via a multi-carrier signal over a flat fading channel. As a consequence of the rectifier nonlinearity, this work highlights that asymmetric PSK modulation provides benefits over conventional symmetric PSK modulation in SWIPT and opens the door to systematic modulation design tailored for SWIPT.

Simultaneous wireless information and power transfer (SWIPT) formed by the mixture of communication technology and power transmission is one of the research focuses in the field of wireless communication. This paper introduces the architecture of the SWIPT system, analyzes the key technologies, presents a 2.45GHz microwave rectifier circuit at low input power for energy harvesting. Finally, with the use of Ultra-Narrow Band (UNB) as the modulation scheme, the practical SWIPT receiver system is modeled and simulated. The results provide that using UNB signal as the modulation scheme is a new feasible way for SWIPT.

Simultaneous wireless information and power transfer (SWIPT) has emerged as a viable technique to energize and connect low-power autonomous devices and enable future Internet of Things (IoT). A major challenge of SWIPT is the energy consumption of the receiver of such low-power devices. An attractive low-power solution consists of an integrated information decoder (ID) and energy harvester (EH) architecture for SWIPT receiver (IntRx) where the received radiofrequency (RF) signal is first rectified before being used for information decoding. Such architecture eliminates the need for energy-consuming RF components, such as local oscillators and mixers. This article proposes a novel modulation and demodulation method for the IntRx SWIPT architecture based on pulse position modulation (PPM) where information is encoded in the position of the pulse. The new method transmits high amplitude pulses to increase the peak-to-average power ratio (PAPR) of the transmit signal and exploits the EH's nonlinearity so as to boost the harvested dc power. Simultaneously, the information can be decoded from the rectifier signal by simply finding the position of the pulse in a certain symbol duration. We have analyzed both the information and the power transfer performance of the newly proposed PPM for IntRx SWIPT theoretically, numerically, and experimentally. To that end, we have established a SWIPT system testbed in an indoor environment by prototyping a base station to transfer information-power signal and the IntRx SWIPT receiver, including ID and EH blocks. The performance evaluation of the PPM was carried out in various conditions, and the results have been compared and contrasted to conventional signals. Theoretical, numerical, and experimental results highlight the significant benefits of the proposed PPM scheme to enhance the power transfer performance and operate information decoding with low-power consumption.

Simultaneous wireless information and power transfer (SWIPT) is a prospective technology that can handle the energy consumption and communication requirements in the Internet of Things. Resonant beam SWIPT (RB-SWIPT) scheme utilizes narrow optical beam as carrier and with spatially separated resonator structure, which can support high power and high rate SWIPT for mobile devices. However, the performance of original RB-SWIPT systems is limited by returning beam interference and transmission loss. In this paper, we propose a RB-SWIPT scheme for transmission-enhanced and anti-interference. The telescope internal modulator (TIM) and second harmonic generator (SHG) are adopted in the proposed system. The TIM can compress beams to reduce the transmission loss. The SHG can generate frequency-doubled beams to avoid interference. To evaluate the proposed system, we establish mathematical models to depict the beam transmission, energy conversion, electric power output and data receiving. Numerical results illustrate that the proposed system can achieve 18 bit/s/Hz spectral efficiency and deliver 8 W power over 100 m distance.

This paper studies the simultaneous wireless information and power transfer (SWIPT) in the multi-carrier differential chaos shift keying (MC-DCSK) communication system. Two energy harvesting protocols with a power splitting (PS) receiver are considered. In the first protocol, only a fraction of reference sub-carrier signal are used for energy harvesting (EH). In another one, a fraction of all sub-carriers signal are used for EH. We derive the error performance of information decoding (ID) of the two protocols with harvested energy constraints. Then we further optimize the power allocation on sub-carriers by minimizing bit error ratio (BER) of information decoding. The tradeoffs between error performance and harvested energy are obtained with the optimal sub-carrier power ratio. In addition, we compare the throughput and harvested energy of two protocols with total transmitted power and bandwidth constraints.

Unmanned aerial vehicles (UAVs) have recently been envisaged as an enabling technology of 5G. UAVs act as an intermediate relay node to facilitate uninterrupted, high quality communication between information sources and their destination. However, UAV energy management has been a major issue of consideration due to limited power supply, affecting flight duration. Thus, we introduce in this paper a unified energy management framework by resorting to wireless power transfer (WPT), simultaneous wireless information and power transfer (SWIPT) and self-interference (SI) energy harvesting (EH) schemes, in cooperative relay communications. In our new technique, UAVs are deployed as relays equipped with a decode and forward protocol and EH capability operating in a full-duplex (FD) mode. The UAV assists information transmission between a terrestrial base station and a user. The UAV's transmission capability is powered exclusively by the energy harvested from WPT, radio frequency signal transmitted from the source via time-switching SWIPT protocol and SI exploitation. We improve the overall system throughput by the use of FD based UAV-assisted cooperative system. In this proposed system, we formulate two optimization problems to minimize end-to-end outage probability, subject to UAV's power profile and trajectory for a DF relay scheme, respectively. The KKT conditions have been used to obtain closed-form solutions for the two formulated problems. Numerical simulation results validate all the theoretical results. We demonstrate that the performance of our proposed unified EH scheme outperforms that of existing techniques in the literature.

This paper considers simultaneous wireless information and power transfer (SWIPT) mechanisms in a relaying network with finite blocklength (FBL) codes. The reliability of the network is optimized under both a power splitting (PS) protocol and a proposed joint PS and time switching (TS) protocol. Under both protocols, we first determine the overall error probability formulation of the SWIPT-enabled two-hop transmission in the FBL regime. Subsequently, we state and solve optimization problems minimizing the overall error probability. Via numerical analysis, we show the appropriateness of our analytical model and demonstrate the performance advantage of the proposed protocol in comparison to TS and PS protocols. In addition, we provide interesting insights on the system behavior by characterizing the impact of the blocklength, transmit power and packet size on the reliability performance.