- Research Article
- 10.13182/nt85-a33636
Authors
- Aug 01, 1985
- Nuclear Technology
- H Deuber + 58 more +58
Authors
Part 1 Introduction to the nuclear fuel cycle: Nuclear power: Origins and outlook Radiological protection in the nuclear fuel cycle Safeguards, security and safety in the nuclear fuel cycle: The 3S concept Public acceptability of nuclear technology The economics of nuclear power. Part 2 Uranium and thorium nuclear fuel cycle: Materials mining, enrichment and fuel element design and fabrication: Mining and milling of uranium Uranium conversion and enrichment for nuclear power generation Development of the thorium fuel cycle Nuclear fuel assembly design and fabrication. Part 3 Impact of nuclear reactor design and operation on fuel element irradiation: Water cooled thermal reactor designs, operation and fuel cycle CANDU nuclear reactor designs, operation and fuel cycle Gas-cooled nuclear reactor designs, operation and fuel cycle Generation IV nuclear reactor designs, operation and fuel cycle Understanding and modelling fuel behaviour under irradiation. Part 4 Spent nuclear fuel and radioactive waste management: Management of spent nuclear fuel from power reactors Reprocessing of spent oxide fuel from nuclear power reactors Partitioning and transmutation of spent nuclear fuel and radioactive waste Disposal of radioactive waste Packaging and transport of radioactive material in the nuclear fuel cycle.
Authors
Authors
Authors
Click to increase image sizeClick to decrease image size Additional informationNotes on contributorsCharles W. BagnalCharles W. Bagnal Jr. (BS, nuclear engineering, Georgia Institute of Technology, 1980) is a consulting engineer at GRP Consulting, Inc., currently engaged in reactor physics methods development and nuclear engineering support services. He has been involved in nuclear reactor design analysis and software development for six years. His experience includes advanced light water reactor (LWR) and heavy water reactor designs, including extended burnup fuel cycles using gadolinia burnable poison.Gerard P. CavanaughGerard P. Cavanaugh (BS, physics, Massachusetts Institute of Technology, 1969; MS, 1970, and PhD, 1976, nuclear engineering, University of Illinois, Urbana-Champaign) worked from 1973 to 1975 in the Neutronics Physics Division at Oak Ridge National Laboratory. He is currently supervisor of radiation physics and criticality analysis at Combustion Engineering, Inc. (C-E). His primary technical interests are in the areas of radiation transport, stochastic sampling methodologies, and computer applications ranging from mainframes to personal computers.Robert P. HarrisRobert P. Harris (BS, 1974, and MS, 1975, nuclear engineering, and MS, 1984, metallurgy, Rensselaer Polytechnic Institute) has worked in the core design, safety analysis, and licensing of C-E pressurized water reactors since 1973. He is currently involved in the neutronic design of advanced burnable poisons and fuel assemblies. He consults in the areas of core fuel management, safety analysis, and startup physics testing.Regis A. MatzieRegis A. Matzie (BS, physics, U.S. Naval Academy, 1965; MS, 1971, and PhD, 1976, nuclear engineering, Stanford University) is currently the manager of analog plants in the nuclear engineering department at C-E. His current technical interests include advanced LWR designs, methods of improving fuel utilization and fuel cycle costs in current design LWRs, and alternate fuel cycles for advanced converter reactors.Laszlo B. TarkoLaszlo B. Tarko (BS, physics, University of Connecticut, 1980) is currently the lead engineer in the radiation physics group at C-E. His current technical interests include radiation transport, ex-core radiation physics, dose rates, energy deposition, and associated computer techniques.Howard OckenHoward Ocken (D. Eng., metallurgy, Yale University, 1966) is a project manager in the Nuclear Power Division of the Electric Power Research Institute. He has managed projects that addressed materials performance in nuclear core components. His current interests include materials aspects associated with reducing radiation fields, especially replacing cobalt sources and decontamination and preconditioning technology.Per Hedemann JensenPer Hedemann Jensen (BSc, electronic engineering, Technical University, Aarhus, Denmark, 1970) is a senior health physicist at Ris0 National Laboratory, where he is head of the Section for Applied Health Physics. He has been involved in studies of radiological consequences from hypothetical core-melt accidents at nuclear power plants. His current technical interest is experimental work on internal dosimetry problems.Ian J. HastingsIan J. Hastings (PhD, metallurgical science, University of Queensland, 1968) is head of the Fuel Properties and Behaviour Group in the Fuel Materials Branch at the Chalk River Nuclear Laboratories (CRNL) of Atomic Energy of Canada Limited. His current interests are in oxide fuel behavior under irradiation, particularly release of short-lived fission products under normal and accident conditions, and in fusion ceramics.Elio MizzanElio Mizzan (BA Sc, chemical engineering, University of Toronto, 1949) is a supervisor at the Fuel Materials Branch Hot Cell Facility at CRNL. His interests have been in the areas of postirradiation examination of reactor fuels and materials, particularly postdefect handling of spent U02 fuel.Alan M. RossAlan M. Ross (BSc, general, University of London, 1953) is a supervisor at the Recycle Fuel Fabrication Laboratories of the Fuel Materials Branch of CRNL. His interests include the fabrication, nondestructive assay, properties, irradiation behavior, and neutron radiography of current and advanced thermal reactor fuels.John R. KelmJohn R. Kelm is a research technician in the Fuel Materials Branch at CRNL. His research responsibility is the operation of a special project hot cell. His current interest is U02 oxidation and stress corrosion cracking.Real J. ChenierReal J. Chenier is a research technician in the Fuel Materials Branch at CRNL. His current research responsibility is operation of the postirradiation metallographic facilities.D. H. RoseD. H. Rose is a research technologist in the Fuel Properties and Behaviour Group of the Fuel Materials Branch at CRNL. His current responsibility is fabrication and operation of instrumented in-reactor experiments.J. NovakJ. Novak (BASc, engineering science, University of Toronto, 1974) is employed in Central Nuclear Services, Nuclear Generation Division of Ontario Hydro. Since 1976 he has been engaged in the areas of nuclear fuel production and development. His current technical interests include behavior of irradiated fuel in air, U02 powder characteristics, and fuel performance improvement.Claudio RonchiClaudio Ronchi (Dr. rer. nat. phys., State University, Milan, Italy, 1965) is a research officer at the Joint Research Centre (JRC) of the Commission of European Communities. After having worked in the research and development of advanced fuels for fast breeders, he is now engaged in reactor safety studies.Jacques van de LaarJacques van de Laar (Ingenieur Fysische Techniek, H.T.S., Heerlen, The Netherlands, 1974) works in thec mathematical modeling department of JRC-Karlsruhe. He is currently involved in the development and execution of computer programs for reactor fuel performance and safety analysis.Hubert BlankHubert Blank (PhD, metal physics, Technical University of Stuttgart, 1957), head of the Physics Division of the European Institute for Transuranium Elements, Karlsruhe, has directed the “Swelling of Advanced Fuels” project at this institute since 1973.Tetsuo FukasawaTetsuo Fukasawa (BS, 1976; MS, 1978; and Dr. Eng., 1981, nuclear engineering, Tohoku University) is a researcher in the Energy Research Laboratory (ERL), Hitachi, Ltd. He has specialized in the radiochemistry of actinide elements and is currently working in the field of low-level radioactive waste treatment and spent fuel reprocessing.Koichi ChinoKoichi Chino (BS, 1972, and MS, 1974, mechanical engineering, Tokyo Institute of Technology) is a researcher at ERL. His primary areas of interest are transport phenomena and radioactive waste management.Osamu KuriyamaOsamu Kuriyama (BS, 1973, and MS, 1975, Tohoku University) is a researcher at ERL. His current interests include the radioactive waste management and chemistry of nuclear waste.Fumio KawamuraFumio Kawamura (BS, chemical engineering, Gunma University,1970; MS, 1972, and Dr. Eng., 1976, Tohoku University) is a researcher at ERL where he is involved in radioactive waste management and reactor water chemistry.Hideo YusaHideo Yusa (BS, physics, Tohoku University, 1959; Dr. Eng., Osaka University, 1969) is a chief researcher at ERL. He is responsible for the research and development of radioactive waste management systems.Bernard L. CohenBernard L. Cohen (BS, Case Institute of Technology, 1944; MS, University of Pittsburgh, 1948; DSc, Carnegie Institute of Technology, 1950) did basic research on nuclear structure using accelerators at Oak Ridge National Laboratory from 1950 to 1958 and at the University of Pittsburgh until the mid-1970s. He then turned his research efforts to the environmental impacts of energy generation, including studies of radioactive waste, health effects of radiation, risk and risk aversion, radon problems, and reactor safety. He is a professor of physics at the University of Pittsburgh and a former director (1965 to 1978) of its Scaife Nuclear Laboratories.K. TasakaK. Tasaka (PhD, nuclear engineering, University of Tokyo, 1976) first worked in breeder reactor safety and fission product characteristics research for ten years and in light water reactor (LWR) safety research for nine years at the Japan Atomic Energy Research Institute (JAERI). He is the project leader of the Rig of Safety Assessment (ROSA) program, and his current interests include analysis of thermal-hydraulic behavior during a loss-of-coolant accident (LOCA) and an anticipated transient without scram in LWRs.M. SuzukiM. Suzuki (MS, mechanical engineering, Kyoto University, 1971) has worked for the ROSA program since 1974. His current interests include safety evaluation of an LWR.Y. AnodaY. Anoda (PhD, mechanical engineering, University of Tokyo, 1979) is a research engineer for the ROSA program. His current interests include two-phase flow during a LOCA.Y. KoizumiY. Koizumi (PhD, mechanical engineering, University of Tokyo, 1977) is a research engineer for the ROSA program. His current interests include analysis of thermal-hydraulic behavior during a LOCA with emphasis on two-phase flow characteristics and heat transfer.T. YonomotoT. Yonomoto (MS, nuclear engineering, University of Osaka, 1982) is a research engineer for the ROSA program. His current interests include analysis of thermal-hydraulic behavior during a LOCA.H. KumamaruH. Kumamaru (PhD, nuclear engineering, University of Tokyo, 1980) is a research engineer for the ROSA program. His current interests include core heat transfer under LOCA conditions.H. NakamuraH. Nakamura (MS, crystalline material engineering, Nagoya University, 1981) is a research engineer for the ROSA program. His current interests include analysis of thermal-hydraulic behavior during a LOCA.M. ShibaM. Shiba (MS, mechanical engineering, Waseda University, 1959) is the general manager of Reactor Safety Laboratory 1 at JAERI. He has worked for 22 years at JAERI in the field of reactor engineering and safety and is currently responsible for simulated LOCA experiments.Genichi MatsumotoGenichi Matsumoto (BS, physics, Tokyo University, 1946) has been an associate professor of nuclear engineering at Nagoya University from 1963 to the present, where he is responsible for research and education in nuclear reactor engineering. He worked as a member of the Scientific Research Institute of Tokyo following his graduation from Tokyo University, and from 1950 to 1963, he served on the technical staff of the Research Reactor Operation Division of the Japan Atomic Energy Research Institute. His current research field includes nuclear safety, neutron radiography (especially neutron television technology), and heat pipe technology.Soichi DoiSoichi Doi (BS, 1976, and MS, 1978, nuclear engineering, Nagoya University) has been employed by the Mitsubishi Atomic Power Industry Co. since 1978, where he is responsible for the nuclear fuel engineering of light water reactors.Kohei OhkuboKohei Ohkubo (BS, mechanical engineering, Aichi Institute of Technology, 1975) is a staff member of Nagoya University.Yasushi IkedaYasushi Ikeda (BS, physics, 1963, and PhD, nuclear engineering, 1982, Nagoya University) has been an assistant staff member of Nagoya University from 1964 to the present. He has investigated thermodynamics of nuclear materials using mass spectrometric technology; neutron radiography technology is also included in his research interests.Günther HesselGünther Hessel [BS, physics, Technical University Dresden, German Democratic Republic (GDR), 1970] is a research scientist at the Central Institute of Nuclear Research (CIN), Rossendorf. He is involved in experimental investigations and developments for technical diagnosis, especially at nuclear power plants.Hans-Erich KöppenHans-Erich Köppen (BS, computer science, Technical University Dresden, 1973) is a research scientist at the CIN. His area of expertise is microprocessor hard- and software and the construction of autonomously working monitors.Peter LiewersPeter Liewers (BS, physics, University of Halle, GDR, 1957; PhD, physics, University of Leipzig, GDR, 1962) is the scientific leader of the group for reactor diagnostics at the CIN. His interests and activities have shifted from reactor physics to technical diagnostics.Peter SchumannPeter Schumann (BS, nuclear engineering, Technical University Dresden, 1963; PhD, physics, Bergakademie Freiberg, GDR, 1970) is a staff scientist at the CIN where he is concerned with digital signal processing and computer software. Formerly he worked in the field of in-core measuring techniques and neutron spectrometryFrank-Peter WeiβFrank-Peter Weiβ (BS, physics, Technical University Dresden, 1973) is a research scientist in the group for technical diagnostics at the CIN. His current interest is the application of statistical pattern recognition to technical diagnostics.
Read moreThe Challenges of Transport of Radioactive Materials and Wastes in Albania
The transport of Radioactive Materials (RM) and Radioactive Wastes (RAW) involves a potential radiological hazard. To ensure the safety of people, property and the environment, appropriate transport regulations to both domestic and international are necessary. The approved Regulation, their principles and objectives, are in order to ensure that the transport of Radioactive Materials is in compliance with IAEA regulations for the Safe Transport of Radioactive Materials. Albanian Government on 27.05.1971 approved “The Regulation of “Safety Transport of Radioactive Materials and Radiation Protection by Ionising Radiation Sources”[1]. Already, this old regulation was abrogated and a new one so-called: “The Regulation of Safety Hazard Materials”; is in force since 18. 04. 1997 approved by Albanian authorities. In this Regulation exist some articles for the safety Transport of Radioactive Material. Since 2001, we have prepared the new Regulation of Safety Transport of RM & RAW in Albania Our Regulation establishes standards of safety, which provide an acceptable level of control of the radiation, criticality and thermal hazards persons, property and the environment that, are associated with the transport of Radioactive Materials. The total activity of radioactive substances transported in Albania (domestic and international) during 2006 has been some thousands Ci of unsealed & solid radioactive sources, mainly99mTc;131I,60Co,137Cs,241Am etc., by import-export procedures, and approximately over 560 type A and Type B packages.
Read moreChallenges of Atomic Energy Regulation in Indian Context
Challenges of Atomic Energy Regulation in Indian Context
A survey of heatpipe space nuclear reactor power supply
[Background]With the in-depth exploration of space,the power supply requirements for energy supply are gradually increasing.Space nuclear reactor power supply stands out in the deep space exploration mission due to its advantages of passivity,long life and high reliability,hence heat pipe nuclear reactor has become the focus of research in the field of space nuclear reactor.[Purpose]This study aims to evaluate the progress and technology of heat pipe space nuclear reactor used as power supply.[Method]First of all,the conceptual design of heatpipe reactor in the early stage and its application in Kilopower was summarized.Then the details of heatpipe power system(HPS),the heatpipe-operated mars exploration reactor(HOMER),safe affordable fission engine(SAFE)and Kilopower were investigated with emphasis on the structure design,fuel selection,heatpipe arrangement and power design of each reactor.[Results]This survey provides ideas and references for future research and design of heatpipe space nuclear reactor power system.[Conclusions]The design of heatpipe reactor is highly flexible and innovative.The use of different alkali metal heat pipes and thermoelectric conversion methods has a direct impact on the system power and the quality of the entire system.The combination of heat pipe and various thermoelectric conversion methods can be attempted.
Read moreModelo reducido de un reactor nuclear y su utilización en las asignaturas del ámbito de la Ingeniería Nuclear
<p>En el grado de Ingeniería de la Energía, los alumnos pueden cursar las asignaturas de Tecnología Nuclear y Seguridad Nuclear. En ambas asignaturas se estudia el diseño de un reactor nuclear para que la central funcione en condiciones seguras. Para conseguir que los alumnos entiendan el funcionamiento de un reactor nuclear es interesante el uso de modelos matemáticos que reproduzcan tanto la potencia generada como la evolución de otras variables que afectan a la seguridad de la planta. En este trabajo, se presenta un modelo sencillo de reactor de agua a presión que permite observar la evolución temporal de la potencia del reactor y las temperaturas de los componentes más importantes de la planta. Para obtener la potencia generada se hace uso del modelo de cinética puntual, mientras que para el cálculo de las temperaturas del combustible y del refrigerante se utiliza un modelo sencillo de transmisión de calor. <br />De este modo, el problema se formula mediante un sistema de ecuaciones diferenciales ordinarias que se resuelve utilizando métodos numéricos. El desarrollo del modelo permite a los alumnos de Tecnología Nuclear y Seguridad Nuclear comprender la evolución temporal de alguna de las variables de un reactor y darse cuenta de los efectos estabilizantes que los parámetros de la termohidráulica tienen sobre la potencia generada.</p>
Read moreCurrent Status of Radioactive Waste Management in Korea
Korean energy security is dependent on the peaceful and safe utilization of nuclear energy. The Korean government’s policy on nuclear energy can be summarized with two principles: promoting the peaceful uses of nuclear energy and ensuring its safe use and storage. Since April 1978 Korea has strongly relied on nuclear energy for its electricity generation. As of today, 20 nuclear power plants, 16 pressurized water reactors PWRs and 4 Canada Deuterium Uranium CANDU reactors are in operation, and 4 PWRs are under construction. The installed nuclear capacity is 17.7 GWe, representing 27% of the nation’s total installed capacity. The nuclear share in electricity remains at around 37.8%, reaching a level of 146.8 TWh. New power reactors in Korea Standard Nuclear Power Plants are fully designed by domestic technologies. A more advanced reactor named AP1400 will be commissioned in 2020. The Achilles’ heel of nuclear energy is radioactive waste. Even though proper scientific management of radioactive waste has been found and proved safe for lowand intermediate-level waste LILW disposal and an interim storage of spent nuclear fuel and even the introduction of permanent disposal of high-level radioactive waste HLW is envisaged to be feasible, the public perception on these issues is not supportive. The public’s everlasting “not in my backyard” refrain has hindered the implementation of Korea’s radioactive waste management program for the last two decades. Overcoming the safety issues involved in radioactive waste management is not a simple scientific problem. It requires attention to both state-of-the-art science and technology and the psychology of the general and local public. In fact, it is a transscientific issue, a fusion of science and socioeconomic studies. The Korean Atomic Energy Commission provided clear milestones for constructing two key facilities: the LILW repository by 2008 and the centralized storage for spent fuel by 2016. With the full support of the Korean government, institutes, and general public, Korea Hydro Nuclear Power KHNP secured a site for the LILW repository in 2005. An underground repository with the capacity for 100,000 drums is under construction, and will be in commission by 2012. Long-term safe management of spent nuclear fuel is necessary not only to store spent fuel over a long period of time but also to potentially recycle it under full observance of the nuclear nonproliferation duties. The permanent disposal of HLW is the research and development R&D topic for a future generation and involves protecting the environment and minimizing the economic burden. Since 1997 Korea Atomic Energy Research Institute KAERI has been developing a permanent disposal facility for HLW and a total system performance assessment TSPA . Its current R&D activities are focused on the preliminary conceptual design of the Korean Reference Disposal System KRS , development of the
Read moreTraining in the Application of the ASME Code to Transportation Packaging of Radioactive Materials
The Department of Energy has established guidelines for the qualifications and training of technical experts preparing and reviewing the safety analysis report for packaging (SARP) and transportation of radioactive materials. One of the qualifications is a working knowledge of, and familiarity with the ASME Boiler and Pressure Vessel Code, referred to hereafter as the ASME Code. DOE is sponsoring a course on the application of the ASME Code to the transportation packaging of radioactive materials. The course addresses both ASME design requirements and the safety requirements in the federal regulations. The main objective of this paper is to describe the salient features of the course, with the focus on the application of Section III, Divisions 1 and 3, and Section VIII of the ASME Code to the design and construction of the containment vessel and other packaging components used for transportation (and storage) of radioactive materials, including spent nuclear fuel and high-level radioactive waste. The training course includes the ASME Code-related topics that are needed to satisfy all Nuclear Regulatory Commission (NRC) requirements in Title 10 of the Code of Federal Regulation Part 71 (10 CFR 71). Specifically, the topics include requirements for materials, design, fabrication, examination, testing, and quality assurance for containment vessels, bolted closures, components to maintain subcriticality, and other packaging components. The design addresses thermal and pressure loading, fatigue, nonductile fracture and buckling of these components during both normal conditions of transport and hypothetical accident conditions described in 10 CFR 71. Various examples are drawn from the review of certificate applications for Type B and fissile material transportation packagings.
Read moreUK
The United Kingdom has signed a new international convention on the safety of spent nuclear fuel and radioactive waste. The agreement, signed in Vienna on the 40th Anniversary of the International Atomic Energy Agency (IAEA), sets tough international obligations for the management of these materials to ensure the protection of both the public and the environment.
Read moreWaste management facilities cost information for transportation of radioactive and hazardous materials
This report contains cost information on the U.S. Department of Energy (DOE) Complex waste streams that will be addressed by DOE in the programmatic environmental impact statement (PEIS) project. It describes the results of the task commissioned by DOE to develop cost information for transportation of radioactive and hazardous waste. It contains transportation costs for most types of DOE waste streams: low-level waste (LLW), mixed low-level waste (MLLW), alpha LLW and alpha MLLW, Greater-Than-Class C (GTCC) LLW and DOE equivalent waste, transuranic (TRU) waste, spent nuclear fuel (SNF), and hazardous waste. Unit rates for transportation of contact-handled (<200 mrem/hr contact dose) and remote-handled (>200 mrem/hr contact dose) radioactive waste are estimated. Land transportation of radioactive and hazardous waste is subject to regulations promulgated by DOE, the U.S. Department of Transportation (DOT), the U.S. Nuclear Regulatory Commission (NRC), and state and local agencies. The cost estimates in this report assume compliance with applicable regulations.
Read moreGAS-COOLED REACTOR TECHNOLOGY
GAS-COOLED REACTOR TECHNOLOGY
Fusion-Fission Hybrid Nuclear Reactors: For enhanced nuclear fuel utilization and radioactive waste reduction
Nuclear energy is contributing to the long-term solution to stave off climate change. However, current nuclear fission technology accesses only about 1-3% of the nuclear energy content of natural uranium, which is inefficient, and also creates a radioactive waste disposal problem. Combining nuclear fission technology with emerging nuclear fusion technology to create a fusion-fission hybrid would yield extra fusion neutrons to 1) convert much more of the uranium into fissionable material, which would increase efficient utilization of the nuclear fuel resource, and 2) significantly reduce (by fission) the most long-lived radioactive nuclear waste. This book describes fusion-fission hybrid physics and technology. The first parts briefly review nuclear fission principles and describe design and safety of nuclear fission reactors; then the fundamentals of nuclear fusion and fusion reactor concepts are described, together with ongoing and future challenges and anticipated developments in this not-yet matured technology. Chapters cover the scientific basis of nuclear fission and the fission fuel cycle, advanced fission reactors, safety aspects, the scientific and technological basis of nuclear fusion power, future improvements expected, and then the fusion-fission hybrid (FFH) breeder and burner reactor concept principles, with illustrative FFH design concepts, safety analyses, and examples of the use of fusion neutrons for helping to achieve burning and breeding fission fuel cycles. This concise work is essential reading for researchers and policy makers in nuclear energy research and engineering, including advanced students.
Read moreNuclear energy: current and future schemes
Focus Nuclear power has been a reliable source of electricity in many countries for decades, and it will be an essential component of the mix of energy sources required to meet environmental goals by reducing greenhouse-gas emissions, reducing the dependence on fossil fuels, and enabling global access to energy. Materials science will play a key role in developing options in nuclear power, including new reactors with improved safety (especially in the light of the Fukushima Daiichi nuclear accident), reliability, and efficiency; technology to help minimize proliferation (discussed in Chapter 14); and viable, safe, long-term options for waste management (discussed in Chapter 15). Such efforts will provide opportunities to address broader challenges associated with nuclear energy, including public opinion and the investment risks associated with building new nuclear power plants. Synopsis The energy density (i.e., the quantity of useful energy stored per unit volume) of uranium fuel used today in light-water reactors (the most prevalent type of nuclear reactor) is already orders of magnitude larger than that of other energy sources. For example, one reactor fuel pellet produces approximately as much heat energy as 150 gal of fuel oil or 1 ton of high-grade coal. Moreover, the utilization of the energy density is being increased further through improvements in fuel technology and by developments in reactor design. This chapter focuses on the materials science challenges that exist in a fission reactor, that is, those related to the nuclear fuel, the cladding, and the structural materials, which are exposed to extremely high temperatures, moderate pressures, and an intense radiation field. Technical issues that extend beyond the workings of reactors, namely nuclear non-proliferation and nuclear waste, are addressed in Chapters 14 and 15, respectively.
Read morePressure Drop and Flow Pulsation in Tight-Lattice Rod Bundle
In order to ensure the compactness and high-power density of a nuclear power reactor, the research on tight-lattice fuel bundle, with a narrow gap distance between fuels, has been highlighted. Recently, KAERI (Korea Atomic Energy Research Institute) has been developing dual-cooled annular fuel to increase a significant amount of the reactor power in OPR1000 (Optimized Power Reactor), a PWR (Pressurized Water Reactor) optimized in the Republic of Korea. The dual-cooled annular fuel is configured to allow a coolant flow through the inner channel as well as the outer channel. To introduce the dual-cooled annular fuel to OPR1000 is aiming at increasing the reactor power by 20% and reducing the fuel-pellet temperature by 30%, as compared to the cylindrical solid fuel, without a change in reactor components. In such a case, due to larger outer diameter of a dual-cooled annular fuel, the dual-cooled annular fuel assembly exhibits a smaller P/D (Pitch-to-Diameter ratio) than the conventional cylindrical solid fuel assembly. In other words, the dual-cooled annular fuel array becomes the tight-lattice fuel bundle configuration, and such a change in P/D can significantly affect the thermal-hydraulic characteristics in nuclear reactor core. In this paper, the pressure drop and flow pulsation in tight-lattice rod bundle were investigated. As the test sections, the tight-lattice rod bundle of P/D = 1.08 was prepared with the regular rod bundle of P/D = 1.35. The friction factors in P/D = 1.08 appeared smaller than those in P/D = 1.35. For P/D = 1.08, the twist-vane spacer grid became the larger pressure loss coefficients than the plain spacer grid. In P/D = 1.08, the flow pulsation, quasi-periodic oscillating flow motion, was visualized successfully by PIV (Particle Image Velocimetry) and MIR (Matching Index of Refraction) techniques. The peak frequency and power spectral density of flow pulsation increased with increasing the Reynolds number. Our belief is that this work can contribute to a design of nuclear reactor with tight-lattice fuel bundle for compactness and power-uprate and a further understanding of the coolant mixing phenomena in a nuclear fuel assembly.
Read more19 - Packaging and transport of radioactive material in the nuclear fuel cycle
19 - Packaging and transport of radioactive material in the nuclear fuel cycle