Numerical Analysis of a Functional Equation for the Stochastic Optimal Control Problem

In this paper, the stochastic optimal control problems, which frequently occur in economic and finance are investigated. First, using Bellman’s dynamic programming method the stochastic optimal control problems are converted to Hamilton-Jacobi-Bellman (HJB) equation. Then, obtained HJB equation is solved through the method of separation of variables by guessing a solution via its terminal condition. Also, the non-linear optimal feedback control law is constructed. Finally, the solution procedure is illustrated for solving some examples that two of them are financial models. In fact, to highlight the applications of stochastic optimal control problems in financial mathematics, some financial models are presented.

A stochastic minimax optimal time-delay state feedback control strategy for uncertain quasi-integrable Hamiltonian systems is proposed. First, a stochastic optimal state feedback control problem of uncertain quasi-integrable Hamiltonian system with time delay in feedback control subjected to Gaussian white noise is formulated. Then, the time-delayed state feedback control forces are approximated by the control forces without time delay and the original problem is converted into a stochastic optimal state feedback control problem of an uncertain system without time delay. After that, by following a procedure based on the stochastic averaging method and stochastic differential game, the worst-case disturbances and the optimal controls are obtained from solving a Hamiltonian–Jacobi–Isaacs (HJI) equation. As an example, the stochastic minimax optimal state feedback control of a Duffing oscillator with parametric disturbances and time-delayed feedback control is worked out in detail to illustrate the procedure and effectiveness of the proposed control strategy.

This article addresses the problem of quantifying the uncertainty in planning aircraft ground movement operations using towbarless robotic tractors taking into account the inherent uncertainties of the problem, specifically, the uncertainties in the weight of the aircraft and in the rolling resistance of the wheels of the main landing gear. The tractor‐aircraft system is represented as a tractor‐trailer system with random parameters characterized by means of probability density functions. The quantification of the uncertainties is conducted within an optimal control framework using the formulation of a stochastic optimal control problem, which is solved through a stochastic collocation method based on generalized polynomial chaos. Specifically, the stochastic optimal control problem is converted into a set of deterministic optimal control problems, in which a reduced number of sample values of the random parameters are employed to solve particular instances of the problem. Using these sample values, it is possible to express the obtained optimal solutions as orthogonal polynomial expansions in terms of the uncertain parameters, which allows both statistical and global sensitivity analysis of the stochastic optimal solutions to be carried out in an efficient way. The objectives of this article are to understand the effects of the uncertainties in the model parameters of the tractor‐aircraft system on the solutions of the optimal control problem and to identify which uncertain parameters have more influence on the variability of these solutions. The ultimate goal is to determine the best approach for executing aircraft ground movement operations in the presence of such uncertainties.

A nonlinear stochastic control problem related to ow control is considered. It is assumed that the state of a link is described by a controlled hidden Markov process with a finite state set, while the loss ow is described by a counting process with intensity depending on a current transmission rate and an unobserved link state. The control is the transmission rate, and it has to be chosen as a nonanticipating process depending on the observation of the loss process. The aim of the control is to achieve the maximum of some utility function that takes into account losses of the transmitted information. Originally, the problem belongs to the class of stochastic control problems with incomplete information; however, optimal filtering equations that provide estimation of the current link state based on observations of the loss process allow one to reduce the problem to a standard stochastic control problem with full observations. Then a necessary optimality condition is derived in the form of a stochastic maximum principle, which allows us to obtain explicit analytic expressions for the optimal control in some particular cases. Optimal and suboptimal controls are investigated and compared with the ow control schemes used in TCP/IP (Transmission Control Protocols/Internet Protocols) networks. In particular, the optimal control demonstrates a much smoother behavior than the TCP/IP congestion control currently used.

In this research article, we focus on a stochastic optimal control problem with two types of terminal constraints. These specific conditions provide real-valued and stochastic Lagrange multipliers. Our model evolves according to a Markov regime-switching jump diffusion model with memory. In this context, the memory is represented by a Stochastic Differential Delay Equation. We present two theorems for each constraint within the general formulation of stochastic optimal control theory in a Lagrangian environment. We approach to this task from a theoretical perspective and provide mild technical assumptions, which make our theorems applicable for a broad class of stochastic control problems as well as for a wide range of disciplines such as engineering, biology, operations research, medicine, computer science and economics. In this work, we apply Stochastic Maximum Principle to demonstrate an optimal dividend policy corresponding to a time-delayed wealth process of a company. Moreover, we determine the real-valued Lagrange multiplier of this control problem explicitly.

We consider a sufficient maximum principle of optimal control for a stochastic control problem. This problem is governed by a system of fully coupled multi-dimensional forward-backward doubly stochastic differential equation with Poisson jumps. Moreover, all the coefficients appearing in this system are allowed to be random and depend on the control variable. We derive, in particular, sufficient conditions for optimality for this stochastic optimal control problem. We apply our result to treat a kind of forward-backward doubly stochastic linear quadratic optimal control problems with jumps.

Optimal control simulations have shown that both musculoskeletal dynamics and physiological noise are important determinants of movement. However, due to the limited efficiency of available computational tools, deterministic simulations of movement focus on accurately modelling the musculoskeletal system while neglecting physiological noise, and stochastic simulations account for noise while simplifying the dynamics. We took advantage of recent approaches where stochastic optimal control problems are approximated using deterministic optimal control problems, which can be solved efficiently using direct collocation. We were thus able to extend predictions of stochastic optimal control as a theory of motor coordination to include muscle coordination and movement patterns emerging from non-linear musculoskeletal dynamics. In stochastic optimal control simulations of human standing balance, we demonstrated that the inclusion of muscle dynamics can predict muscle co-contraction as minimal effort strategy that complements sensorimotor feedback control in the presence of sensory noise. In simulations of reaching, we demonstrated that nonlinear multi-segment musculoskeletal dynamics enables complex perturbed and unperturbed reach trajectories under a variety of task conditions to be predicted. In both behaviors, we demonstrated how interactions between task constraint, sensory noise, and the intrinsic properties of muscle influence optimal muscle coordination patterns, including muscle co-contraction, and the resulting movement trajectories. Our approach enables a true minimum effort solution to be identified as task constraints, such as movement accuracy, can be explicitly imposed, rather than being approximated using penalty terms in the cost function. Our approximate stochastic optimal control framework predicts complex features, not captured by previous simulation approaches, providing a generalizable and valuable tool to study how musculoskeletal dynamics and physiological noise may alter neural control of movement in both healthy and pathological movements.

A stochastic control problem is formulated and we get the explicit form of the optimal control for initial-data-parameterized linear quadratic stochastic optimal control problems with random jumps. The optimal control can be proved to be unique. A stochastic Riccati equation is rigorous derived from the stochastic Hamilton system, which provides an optimal feedback control. This completes the the interrelationship between the stochastic Riccati equation and stochastic Hamilton system as two different but equivalent tools for the stochastic linear quadratic problem.

Most of the existing literature concerning lifetime extension of battery energy storage (BES) devices mainly focus on designing controllers in BES devices themselves. In this paper, the problem of BES lifetime extension in an islanded microgrid is considered from a different perspective, in the sense that such target is achieved by adjusting output power of controllable power generation devices. To obtain accurate power models of photovoltaic panels and loads, a new hybrid modeling method utilizing both neural networks and stochastic differential equations is proposed. We formulate the problem of extending the service life of BES devices as a stochastic optimal control problem. Meanwhile, the situation of over-control in micro-turbines is effectively avoided. We solve such stochastic optimization problem using the dynamic programming solver provided by the open source C++ program BOCOPHJB. Finally, the obtained optimal controller is verified with simulations.

This article examines an economic growth model that expresses the interaction between production, technology stock, and research and development (R&D) investments. The goal of this study is to maximize production. Considering the presence of Gaussian white noises, this model is reformulated as a stochastic optimal control problem, where the R&D investment rate is defined as the control input. We aim to explore the efficiency of Kalman filtering approaches for solving this problem. Here, the extended Kalman filter (EKF) and unscented Kalman filter (UKF) are applied for state estimation. The state equation linearization is made in the EKF, while the unscented transform is taken in the UKF for generating a set of sigma points. These approaches aim to estimate the state dynamics from different perspectives. With these state estimates, two different computational algorithms are proposed, the EKF for state-control (EKF4SC) and UKF for state-control (UKF4SC) algorithms. The optimal control policy is designed to minimize the cost function. For illustration, the model's parameters are considered in the simulation experiment. The simulation results showed that the UKF has higher accuracy in the state estimation with the smallest mean squares of error compared with the EKF. Moreover, the optimal control policy based on the state estimate generated from the UKF could optimize the cost function of the problem. Hence, the results show the efficiency of the algorithms proposed. In conclusion, the application of the Kalman filtering algorithms to the economic growth model is presented. The significance of this study is to provide a stochastic optimal control model for the economic growth problem and to suggest an efficient computational approach for solving this stochastic optimal control problem.

We introduce a novel generic methodology to solve continuous finite-horizon stochastic optimal control problems (SOCPs). We treat controlled stochastic differential equations (SDEs) within the Wiener chaos framework by utilizing Malliavin calculus and developing innovative ideas to preserve the feedback character of optimal Markov decision rules. This allows a direct reformulation of SOCPs into deterministic ones. Hence, it facilitates using Bock’s direct multiple shooting method for solving SOCPs and pioneers the extension of sophisticated methods for deterministic control to the broad context of SDEs. Numerical examples validate this new framework with huge computational advantages compared to standard ideas in SOC.

A global maximum principle for stochastic optimal control problems with delay and applications

Optimal control of systems with noisy memory and BSDEs with Malliavin derivatives

A Class of Linear Quadratic Gaussian Hybrid Optimal Control Problems with Realization–Independent Riccati Equations

A conventional approach to solving stochastic optimal control problems with time-dependent uncertainties involves the use of the stochastic maximum principle (SMP) technique. For large-scale problems, however, such an algorithm frequently leads to convergence complexities when solving the two-point boundary value problem resulting from the optimality conditions. An alternative approach consists of using continuous random variables to capture uncertainty through sampling-based methods embedded within an optimization strategy for the decision variables; such a technique may also fail due to the computational intensity involved in excessive model calculations for evaluating the objective function and its derivatives for each sample. This paper presents a new approach to solving stochastic optimal control problems with time-dependent uncertainties based on BONUS (Better Optimization algorithm for Nonlinear Uncertain Systems). The BONUS has been used successfully for non-linear programming problems with static uncertainties, but we show here that its scope can be extended to the case of optimal control problems with time-dependent uncertainties. A batch reactor for biodiesel production was used as a case study to illustrate the proposed approach. Results for a maximum profit problem indicate that the optimal objective function and the optimal profiles were better than those obtained by the maximum principle.