A critical aspect when modelling wave propagation in the ground with the finite element technique is using non-reflecting boundaries. The choice of element size and domain size to fit non-reflecting boundaries becomes difficult when a forcing function with a large range of frequencies is used. This paper presents the results from a finite element study designed to gain insight into wave propagation in soils due to an applied vertical harmonic load with varying frequency content ranging from 10 Hz to 95 Hz using Abaqus/Explicit. Comparison is made between numerical results and measured field data. It is concluded that Abaqus/Explicit can reliably model the wave propagation problem. Particularly, the phase velocity determined by finite element modelling compared favourably to values obtained theoretically, as well as in the field. In addition, good correlation was found between the dispersion data from the model and field measurements.