- Book Chapter
110
- 10.1002/9780470085004.ch1
Diffraction, Fourier Optics and Imaging
- May 18, 2006
- Okan K Ersoy
Diffraction, Fourier Optics and Imaging
Optical holography can produce very realistic virtual images due to its capability to properly convey the depth cues that we use to interpret three-dimensional objects. Computational holography is the use of digital representations plus computational methods to carry out the holographic operations of construction and reconstruction. The large computational requirements of holographic simulations prohibit present-day existence of real-time holographic displays comparable in size to traditional two-dimensional displays. Fourier-based approaches to calculate the Fresnel diffraction of light provide one of the most efficient algorithms for holographic computations because this permits the use of the fast Fourier transform (FFT). The limitations on sampling imposed by Fourier-based algorithms have been overcome by the development, in this research, of a fast shifted Fresnel transform. This fast shifted Fresnel transform was used to develop a tiling approach to hologram construction and reconstruction, which computes the Fresnel propagation of light between parallel planes having different resolutions. A new method for hologram construction is presented, named partitioned hologram computation, which applies the concepts of the shifted Fresnel transform and tiling.
Diffraction, Fourier Optics and Imaging
Diffraction, Fourier Optics and Imaging
Computer holography as an application of computational optics
Several techniques are reviewed in high-definition computer holography. These techniques are based on numerical techniques in wave optics. For example, the polygon-based method based on propagation between tilted planes is used for calculating the field of polygonal surface sources of light. Numerical propagation of large-scaled field is also implemented by using the technique of off-axis propagation. The silhouette method for occlusion processing is based on the angular spectrum method for propagation between parallel planes. The relation between computer holography and computational optics are presented and several high-definition CGHs using these techniques are demonstrated for verifying the techniques.
Read moreOptics and Photonics: An Introduction
First Page
On the suitability of Bruun’s FFT algorithm for software defined radio
Fast Fourier Transform (FFT) is the most basic and essential part of Software Defined Radio (SDR). Therefore, designing regular, reconfigurable, modular and low hardware complexity FFT computation block is very important. A single FFT block should be configurable for varying length FFT computation and also for computation of different transforms like DCT, DST etc. In this paper, the authors analyze implementation complexity and Noise to Signal Ratio (NSR) of Bruunpsilas FFT w.r.t. classical FFT for SDR. It is shown that, Bruunpsilas algorithm for FFT computation is ideally suited for SDR and should be used in preference over any classical FFT architecture for most practical cases.
Read moreChallenges to Tera-pixel-scale Full-parallax Computer Holography for 3D Imaging
Computer holography requires a trillion pixels and a full-parallax view to reconstruct quality three-dimensional images comparable to those reconstructed in traditional optical holography. Large-scale full-parallax computer-generated holograms are presented to introduce state-of-the-art computer holography.
Read moreSemi-analytic Fresnel diffraction calculation with polynomial decomposition.
The numerical method based on the fast Fourier transform (FFT) is generally applied to calculate the Fresnel diffraction field, which would suffer from sampling constraints. To break this limit, in this Letter, the semi-analytic Fresnel diffraction calculation method is proposed based on polynomial decomposition. The diffraction field is computed by using properly analytic Fresnel diffraction basis functions (FDBFs) according to the application requirements. Analytic FDBF is calculated based on Legendre or Chebyshev polynomials by using the object-domain frequency division multiplexing method. The proposed method offers arbitrary sampling, high-flexibility, and high-accuracy diffraction calculation in the full Fresnel region. The computational efficiency and accuracy of the proposed method are compared with FFT-based methods. It has potential application in light field analysis, wavefront sensing, and image processing.
Read moreReconstructed image correction using computational hologram algorithm based on high-dimensional space
Computational holography is one of the most potential 3D display technologies. In recent years, with the continuous iterative evolution of holographic optical theory and the continuous maturity of computer software and hardware technologies, related technologies have developed rapidly. Correlation optimization algorithm is a research hotspot at present. This paper studies and analyzes several pure phase hologram generation and optimization algorithms commonly used in this field in recent years, and points out that the above algorithms have the limitation that the quality of reconstructed images cannot be further effectively improved; for this problem, we propose a new optimization idea based on high-dimensional space is to find the reconstructed image with similar pixel distribution to the target image in the highdimensional space. At the same time, we propose a more practical pixel correction method, which considers the reconstruction of the image from the high-dimensional space. Optimization can further effectively reduce interference such as speckle noise and improve the quality of reconstructed images. Through experimental calculation, we obtained the peak signal-to-noise ratio and structural similarity of the reconstructed image before and after the correction of the common algorithm and the original image and compared them. It can be verified through experiments that the numerical improvement of the above two indicators obtained by our proposed method is obvious. The quality of the reconstructed images has also been better improved.
Read moreNew algorithms for the FFT computation of symmetric and translational complex conjugate sequences
A previously proposed algorithm for the FFT (fast Fourier transform) computation of real symmetric and antisymmetric sequences reduced the N-point symmetric FFT computation to a N/4-point complex FFT computation, but the postprocessing involved division by sin(2 pi k/N). For large size N, this may cause stability problems. An algorithm is presented which overcomes the problem for real symmetric and antisymmetric data sequences. A similar algorithm is given for the translational complex conjugate symmetric data sequence. >
Read moreOn the Manual and Digital Computer Methods Used at Lindau for the Conversion of Multifrequency Ionograms to Electron Density‐Height Profiles
Real‐height analysis of multifrequency ordinary and extraordinary virtual‐height traces has been carried out at Lindau since 1956 with methods of our own design. They all take account of underlying ionization and extrapolate the real‐height profile up to the peak of the layer under discussion. This extrapolation is based on observed virtual heights rather than on deduced real heights. At least second‐order approximations of the profile are used here. All of the methods allow for analysis of monotonic and nonmonotonic virtual‐height traces. They differ only in their final accuracy. A model method is described first; only 8 min are necessary to reduce a simple F trace. The respective real‐height data have proved very useful for statistical purposes. Since 1957, very accurate and general manual methods have been in use. One and one‐half hours are necessary for a full analysis of one ionogram. While these methods rely on an estimate by eye of the critical frequency of the layer of interest, the digital computer method in general use at Lindau since 1962 deduces this value too. The accuracy of this digital computer method is much better than the technical accuracy of the present ionosondes. A complete real‐height analysis of one virtual‐height trace, showing a critical frequency of 16 MHz, amounts to about 14 min of computer time (IBM 650).Test results on a series of theoretical ionograms of monotonic and more or less complicated non‐monotonic electron density‐height profiles, valley profiles, are also reported.
Read moreOptical Reconstruction of Full-color Optical Scanning Holography Images using an Iterative Direct Binary Search Algorithm
We introduce a process for optically reconstructing full-color holographic images recorded by optical scanning holography. A complex RGB-color hologram was recorded and converted into a binary hologram using a direct binary search (DBS) algorithm. The generated binary hologram was then optically reconstructed using a spatial light modulator. The discrepancies between the reconstructed object sizes and colors due to chromatic aberration were corrected by adjusting the reconstruction parameters in the DBS algorithm. To the best of our knowledge, this represents the first optical reconstruction of a full-color hologram recorded by optical scanning holography.
Read moreFast calculation method for optical diffraction on tilted planes by use of the angular spectrum of plane waves.
A novel method for simulating field propagation is presented. The method, based on the angular spectrum of plane waves and coordinate rotation in the Fourier domain, removes geometric limitations posed by conventional propagation calculation and enables us to calculate complex amplitudes of diffracted waves on a plane not parallel to the aperture. This method can be implemented by using the fast Fourier transformation twice and a spectrum interpolation. It features computation time that is comparable with that of standard calculation methods for diffraction or propagation between parallel planes. To demonstrate the method, numerical results as well as a general formulation are reported for a single-axis rotation.
Read moreReducing ringing artifacts for hologram reconstruction by extracting patterns of ringing artifacts
Diffraction calculation techniques based on Fourier transform, such as Fresnel diffraction, are essential in computational optics. Notably, zero padding is applied in diffraction calculations to manipulate sampling pitch and convolution calculations. However, zero padding can generate ringing artifacts due to sudden changes in value, which affect hologram reconstructions, etc. Several existing methods reduce the ringing artifact by decreasing the sudden changes in values. Therefore, in this study, we propose and validate a “ringing artifact extraction method” that focuses on the pattern of ringing artifacts, which depends on the conditions of diffraction calculation.
Read moreThree-dimensional remote sensing by optical scanning holography
A technique is presented by which holograms can be recorded when an object or scene is scanned with an optically heterodyned Fresnel zone pattern. The experimental setup, based on optical scanning holography, is described and experimental results are presented. We apply the scanning holography technique to three-dimensional reflective objects for the first time to our knowledge and address the unique requirements for such a system. We discuss holographic recording and numerical image reconstruction using a system point-spread function (PSF) approach. We demonstrate numerical image reconstruction of experimentally recorded holograms by two techniques: deconvolution with a simulated PSF and an experimentally acquired PSF.
Read moreAn FFT implementation of the generalized maximum likelihood algorithm for image smoothing
Practical implementation of the generalized maximum-likelihood algorithm on noise-corrupted images becomes prohibitive when the covariance of the noise-free image is unavailable. By partitioning the image into locally Markovian sub-blocks with separable correlation coefficients, a covariance model is found that enables fast Fourier transform (FFT) processing. Simulations using real images are presented to characterize the algorithm's applicability and noise-reduction performance.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">></ETX>
Read moreHolographic lenses for the spatial patterning of particles toward tissue engineering in vivo
For tissue engineering, cells are aligned along defined structures that allow for cellular agglomeration and regeneration. Acoustic radiation force has been used for the contactless generation of patterns. Particles that are much smaller than the wavelength are agglomerated along high pressure regions and the forces are predicted using Gor’kov potential. Ultrasound standing waves have been used in vitro to create parallel planes where the cells agglomerate allowing for vascular tissue growth between planes. Here, we design and build a single-sided source with a holographic lens made using Fourier spectrum approach to generate parallel lines of high pressure amplitude over a limited range, few wavelengths, for cellular patterning. A few sources were fabricated at 1.5 and 2 MHz using geometrical and holographic lenses. The phase generation from holographic lenses was improved using global phase unwrapping scheme. Acoustic holography measurement was performed for all sources to verify the pressure output. The cellular patterning was tested on polyethylene microspheres (75-90 μm in diameter) that were placed in a cuvette with water and exposed to ultrasound. The microspheres were aligned along the high pressure region as predicted. This work has the potential to use single-sided transducers for cellular patterning toward tissue engineering in vivo.
Read more