On Feasibility, Stability and Performance in Distributed Model Predictive Control

This paper concerns a distributed model predictive control (DMPC) strategy in which each controller views the signals from other subsystems as disturbance inputs in its local model. The DMPC controllers exchange predictions on the bounds of their state trajectories and incorporate this information into their local DMPC problems. They also impose their own predicted state bounds as constraints in subsequent DMPC iterations to guarantee their subsystem satisfies the bounds broadcast to the other controllers. Each controller solves a local min-max problem on each iteration to optimize performance with respect to worst-case disturbances. Parameterized state feedback is introduced into the DMPC formulation to obtain less conservative solutions and predictions. The paper presents sufficient conditions for feasibility and stability. The approach is illustrated with an example.

Designing a stabilized distributed model predictive control (DMPC) with constraints is an open and important problem for a class of large-scale distributed systems, which are composed by both weakly and strongly coupled subsystems. This paper proposes a design of DMPC network to stabilize this class of large-scale systems. A coupling degree-based clustering method is first designed to classify subsystems into some middle-scale subsystems (M-subsystem) off-line according to the adjacent matrix, so that these M-subsystems are weakly coupled with each other. Then, each M-subsystem is controlled by a virtual model predictive control (MPC), which is realized by several individual controllers with running iterative cooperative DMPC algorithm, since the solution of cooperative DMPC is able to converge to a fixed point without coupling constraints. Each MPC communicates with the corresponding interacted M-subsystems’ MPCs once in a control period for exchanging future state evolution estimation. All the subsystem-based MPCs are composed of the proposed peer-to-peer DMPC network. In addition, an additional consistency and stabilization constraints are added to guarantee the recursive feasibility and stability of the overall system. The convergence of the iterative DMPC algorithm for each M-subsystem and the stabilization analysis of the overall system are provided. The simulation results show the efficiency of the proposed method. Note to Practitioners —The proposed method is designed for the systems, which are composed of both strong and weak coupling subsystems and are controlled in a distributed structure. The aim of this method is to design a distributed model predictive control (MPC) network for the operational optimization of entire system. The designed control structure and the distributed MPC algorithm with the proposed method could guarantee the recursive feasibility and asymptotic stability of the entire system. To apply this method, the first step is to obtain the models of each subsystem. Then, design the distributed MPC network structure according to the proposed cluster algorithm, which determines the set of subsystems that each virtue MPC controls. Next step is to configure the network information exchanging among these subsystems and construct the optimization problem of each subsystem. Finally, use the existing quadratically constrained quadratic program solvers to calculate the optimal control laws and apply these optimal control laws to the corresponding subsystems. This method can be used in large-scale chemical processes, air conditioner systems for multizone buildings, distributed energy generation systems, and so on.

Partitioned Based Cooperative Distributed Model Predictive Control for Large-Scale Nonlinear Systems

This work presents a learning-based approximation scheme to improve the computational burden of general distributed model predictive control (DMPC). Under the framework of dual decomposition, an independent neural network approximator with rectified linear unit is designed for each subsystem. The primal and Lagrangian dual analysis indicates that this error-containing approximation is a suboptimal solution of the global DMPC optimization problem. In addition, the distributed conditions designed to guarantee the feasibility and stability of global system, which inspired by an explicit-implicit procedure to approximate an MPC law, are derived from an decoupling process using dual decomposition. In cases with infeasible approximator output or the distributed conditions are violated, an backup controller will used to promote the implementation of approximation. The proposed learning-based DMPC approximator with feasibility and stability guarantees is finally employed to a reactor-separator process, and simulation results demonstrate the efficiency and superior performance of proposed strategy.

In this study, an approach to design robust distributed model predictive control (MPC) is proposed for polytopic uncertain networked control systems with time delays. To reduce the computational complexity and improve the flexibility, the entire system is decomposed into multiple smaller dimensional subsystems. For each subsystem, the proposed robust distributed MPC algorithm requires solving multiple linear matrix inequality optimisation problems to minimise an upper bound on a robust performance objective. An augmented polytopic uncertainty description is invoked to handle the input delays. The conservativeness of distributed MPC algorithm is reduced by utilising a sequence of feedback control laws. An iterative on‐line algorithm for robust distributed MPC is developed to coordinate the distributed MPC controllers. Convergence and robust stability of the proposed distributed MPC are investigated. A numerical example is carried out to demonstrate the effectiveness of the proposed algorithm.

In this study, a distributed model predictive control algorithm is presented for the polytopic uncertain system subject to randomly occurring actuator saturation and packet loss. The global system is decomposed into several subsystems, and a novel distributed controller model is established to account for both the actuator saturation and packet loss in a unified representation by using two sets of Bernoulli distributed white sequences with known conditional probabilities. By transforming the non‐linear feedback law into a convex hull of linear feedback laws, the distributed controllers for subsystems are obtained by solving a linear matrix inequality (LMI) optimisation problem. Finally, two simulation examples are employed to show the effectiveness of the techniques proposed in this study.

In this paper, an observer‐based event‐triggered distributed model predictive control method is proposed for a class of nonlinear interconnected systems with bounded disturbances, considering unmeasurable states. First of all, the state observer is constructed. It is proved that the observation error is bounded. Second, distributed model predictive controller is designed by using observed value. Meanwhile, the event‐triggered mechanism is set by using the error between the actual output and the predicted output. The setting of event‐triggered mechanism not only ensures the error between the actual output and the predicted output within a certain range, but also reduces the calculation amounts of solving the optimization problem. The states of each subsystem enter the terminal invariant set by distributed model predictive control, and then are stabilized in the invariant set under the action of output feedback control law. In addition, sufficient conditions are given to ensure the feasibility of the algorithm and the stability of the closed‐loop system. Finally, the numerical example is given, and the simulation results verify the effectiveness of the proposed algorithm.

This work focuses on a class of nonlinear control problems that arise when new control systems which may use networked sensors and/or actuators are added to already operating control loops to improve closed‐loop performance. In this case, it is desirable to design the pre‐existing control system and the new control system in a way such that they coordinate their actions. To address this control problem, a distributed model predictive control method is introduced where both the pre‐existing control system and the new control system are designed via Lyapunov‐based model predictive control. Working with general nonlinear models of chemical processes and assuming that there exists a Lyapunov‐based controller that stabilizes the nominal closed‐loop system using only the pre‐existing control loops, two separate Lyapunov‐based model predictive controllers are designed that coordinate their actions in an efficient fashion. Specifically, the proposed distributed model predictive control design preserves the stability properties of the Lyapunov‐based controller, improves the closed‐loop performance, and allows handling input constraints. In addition, the proposed distributed control design requires reduced communication between the two distributed controllers since it requires that these controllers communicate only once at each sampling time and is computationally more efficient compared to the corresponding centralized model predictive control design. The theoretical results are illustrated using a chemical process example. © 2009 American Institute of Chemical Engineers AIChE J, 2009

Combined environmental and economic dispatch of smart grids using distributed model predictive control

ABSTRACTIn this work, synthesis of robust distributed model predictive control (MPC) is presented for a class of linear systems subject to structured time-varying uncertainties. By decomposing a global system into smaller dimensional subsystems, a set of distributed MPC controllers, instead of a centralised controller, are designed. To ensure the robust stability of the closed-loop system with respect to model uncertainties, distributed state feedback laws are obtained by solving a min–max optimisation problem. The design of robust distributed MPC is then transformed into solving a minimisation optimisation problem with linear matrix inequality constraints. An iterative online algorithm with adjustable maximum iteration is proposed to coordinate the distributed controllers to achieve a global performance. The simulation results show the effectiveness of the proposed robust distributed MPC algorithm.

This paper presents a distributed model predictive control(DMPC) strategy to achieve cooperative tasks like consensus and synchronization of linear systems with coupled constraints. Based on the error of state between each subsystem and the center of its cooperative set, a novel DMPC algorithm is designed with its robust feasibility guaranteed by permitting only one subsystem to optimize at each time instant, while renew other subsystems' plans. Illustrative examples are finally conducted to verify the effectiveness of the DMPC strategy.

This paper proposes a dual decomposition method for solving distributed model predictive control. This controller is designed for systems subject to communication constraints, in which nonlinear subsystems interconnected via dynamics and by constraints. The interconnections are relaxed by using gradient method, accelerated gradient and alternating direction methods of multipliers. Also, an event-based communication is proposed to handle the issue of communication constraints especially in embedded systems. In the proposed event-based communication strategy, each controller solves the optimization problem and communicate only if the prices are updated significantly, which can reduce the computation load and release the burden of the network while achieving global performance. Finally, the simulations study of the four-tank benchmark is presented to demonstrate the effectiveness of the proposed schemes.

A robust distributed model predictive control algorithm

Distributed Model Predictive Control with Event-Based Optimization

In order to reduce the heavy communication burden of cooperative distributed model predictive control (DMPC), A DMPC algorithm based on event-trigger is proposed to balancing the control performance and communication burden through optimizing the interconnection structure of subsystems. An event-trigger using the system Lyapunov function is constructed to avoid solving the introduced MINLP optimization directly, the optimal interconnection structure will be updated only when the event-trigger is triggered. The feasibility of the proposed algorithm in system performance and communication burden decrease is validated by the load frequency control (LFC) problem simulation of interconnected power system.