On the performance of single frequency cellular network (SFCN)

As an effective technique for combating multipath fading and for high-bit-rate transmission over wireless channels, orthogonal frequency division multiplexing is extensively used in modern digital television terrestrial broadcasting systems to support high performance bandwidth-efficient multimedia services. Accurate channel estimation is important for the application of simple channel equalization for the broadband multi-carrier orthogonal frequency division multiplexing systems and the accuracy of the channel estimation is crucial to the performance of the overall orthogonal frequency division multiplexing system in terms of the symbol error rate. In this paper, a robust channel estimation scheme is proposed for the receiver of the time domain synchronous orthogonal frequency division multiplexing based Chinese digital television terrestrial broadcasting systems. Simulations under different channel situations show that the proposed channel estimation scheme can also effectively solve the phase noise problem existing at the receiver and verify the efficiency of the proposed scheme.

It is envisioned that all broadcasting systems will be digitalized in future. New services and more information require high data rates for broadcasting systems. There are many digital audio broadcasting standards in the world, such as DAB (Digital Audio Broadcasting) in Band III and Band L, DRM (Digital Radio Mondiale)and HD Radio in AM band and FM band. In this paper, we will present a general purpose SDR (Software Defined Radios) platform to realize digital audio broadcasting systems, including transmission and reception. In the platform, we not only can test novel digital technologies but also experiment with different service modes.

In this paper we present a study of Bit Error Rate (BER), for Digital Audio Broadcasting (DAB) system, employing Coded OFDM with different channel coding schemes. Analysis is carried out for convolutional coded and turbo coded data in an Additive White Gaussian Channel (AWGN) based on different constraint lengths and code generator polynomials used for coding. A comparative study on the computational complexity is also done by applying an audio signal and measuring the data processing time per frame, on computers with different processor speeds. It is shown that a coding gain of approximately 6 dB is achieved using turbo coding when compared to convolutional coding, at a cost of higher computational complexity.

This paper relates to the application method of channel state information (CSI) to the Viterbi (maximum likelihood) decoder in the digital terrestrial television broadcasting system. The proposed Viterbi decoder uses the CSI derived from the pilots inserted in the transmitter of the COFDM (coded orthogonal frequency division multiplexing) system. The CSI is calculated by interpolation using the pilots in the receiver. The active real (I) and imaginary (Q) data after equalization are transferred to the branch metric calculation block that decides the euclidean distance for soft decision decoding and also the estimated CSI values are transferred to the same block. After calculating the euclidean distance for the soft decision decoding, the euclidean distance of the branch metric is multiplied by CSI. To do so, new branch metric values that consider each carrier state information are obtained. We simulated this method in Rayleigh fading defined in the ETSI standard. From the simulation, this method has better performance of about 0.15 dB to 0.7 dB and 2.2 dB to 2.9 dB in the Rayleigh channel than that of conventional soft decision Viterbi decoding with or without a bit interleaver where the constellation is QPSK, l6-QAM and 64-QAM.

This article focus on the implementation of FEC part. The motivation of the design is that FEC is an effective tool to mitigate problems associated with OFDM which stem from multipath fading channel, high speed data rate. One of the key features of BCH codes is that during code design, there is a precise control over the number of symbol errors that are correctable by the code. BCH coder proccesses parralelly with high-speed operation. 8-bit parallel data input and output helps to maximize the throughput. DVB-T2 used LDPC coder, as inner codes with word length up to 64,800 bits, enabling significant proximity to Shannon limit. This encoder supports all code rates and both normal and short frames. Output of LDPC encoder is interleaved with bit interleaver. This project was fully optimized for speed and memory area, fully synchronized by using a single clock. The design was coded in VHDL, synthesized by using Xilinx ISE Design Suite 14.7. The design has been tested on development Kit NetFPGA-1G-CML of Digilent Corporation and the bit map was downloaded into Xilinx Kintex-7 XC7K325T-1FFG676, which is integrated on experimental transmitter system DVB-T2. This research product belong to program “Research of experimental testing of second generation digital terrestrial television broadcasting system DVB-T2” of Vietnamese Communications Television Development JSC.

The transmitting aerials for terrestrial digital audio broadcasting (DAB) systems should have a low directivity in the horizontal plane. So, for example, the aerial of the central transmitter of a terrestrial single frequency network usually has a circular radiation pattern. The present report discusses the design features and advantages of using cylindrical strip radiators as elements of aerials in single frequency networks.

Terrestrial digital multimedia TV/handle broadcasting (DMB-TH) is a newly upcoming framing structure, channel coding and modulation for digital television terrestrial broadcasting system standard of China, which is recently drafted and is ready to be verified in order to deploy mobile multimedia broadcasting services for the public. The adoption of strong channel coding techniques appears to be of key importance for mobile operators and broadcasters. Low-density parity-check (LDPC) codes have been widely considered as error-correcting codes for next generation communication systems. A good LDPC decoder design requires both implementation friendly LDPC codes and efficient decoder architectures. The quality of LDPC code is crucial in determining the coding gain and implementation complexity of LDPC hardware decoders. This paper presents a turbo-decoding message-passing algorithm (TDMP) based LDPC code search algorithm with hardware considerations. The main advantages of the proposed algorithm over the DMB-TH standard decoding algorithm are 1) improvement in coding gain by an order of magnitude at high signal-to-noise ratio (SNR), 2) reduced decoder complexity. The performance of the proposed TDMP architecture is shown by the comparison of simulation results.

Spectrum sensing for the China digital television terrestrial broadcasting system is considered in this paper. The spectrum sensing algorithms utilize PN sequences embedded in the frame headers to perform spectrum sensing. A theoretical lower bound on the misdetection probability for each spectrum sensor presented in this paper is derived. The performances of the proposed spectrum sensing algorithms are demonstrated by computer simulation for the multipath Rayleigh fading and steady state multipath Rayleigh fading channels. Simulation results show that the misdetection probability evaluated by computer simulations is close to the lower bound on the misdetection probability for a steady state multipath Rayleigh channel. When the probability of false alarm is 0.01 and a 50 ms of sensing time is used, a misdetection probability equal to 0.1 is achieved when the signal to noise power ratio is -16 dB, -18.8 dB, and -18 dB for modes 1, 2, and 3 in the multipath Rayleigh fading channel, respectively.

Statistical multiplexing is rapidly becoming an integral part of many digital video broadcasting systems. These systems are designed to ensure optimum usage of channel capacity while providing consistent picture quality through the use of automatic bit-rate allocation. The problem of determining the optimal bit-rate to give each channel is no longer an issue for the broadcaster, except to determine the total bandwidth to be allocated to the statistical multiplexer. Broadcasters familiar with their programme mix (e.g. sports, news, etc.), wish to know the implications on picture quality, given parameters such as the number of channels of each type and the total bandwidth available to the system. Furthermore, large broadcasting systems present the opportunity to 'mix and match' the source material, to optimise performance and ensure sustainable picture quality. This paper investigates the statistics of existing satellite broadcasting channels and demonstrates that the various types of programmes exhibit measurable statistical differences in a consistent manner. By taking important coding parameters such as coded picture resolution into account, the paper derives accurate models to predict the performance of such systems through characterisation of the video sources to be multiplexed.

UWB(Ultra-Wideband)는 낮은 전력으로 초고속 통신을 실현하는 근거리 무선 통신 기술로서 주파수 부족 현상을 넘어서서 신규 기술을 도입할 수 있는 획기적인 기술 방식이다. UWB 전송방식 중의 하나인 MB-OFDM(Multiband Orthogonal Frequency Division Multiplexing) 시스템은 다양한 무선 통신 서비스에 적용이 가능하다. 본 논문에서는 협력 전송에서 전송률이 감소하는 문제를 해결하기 위한 UWB 시스템에서 계층 변조(HM : Hierarchical Modulation)와 순환 중복 검사를 통해 중계기에서 적응적으로 변조방식을 변경하는 새로운 중계 기법을 제시한다. 이는 기존 방법에 비해 비트 에러율은 비슷하며 처리량을 33%까지 증가시키는 장점이 있다. Recently, various transmission techniques for communication and broadcasting systems have been developed to meet the dramatically increasing requirement of consumers. Because UWB (Ultra-Wideband) is a wireless communication technique that supports high data rate with low power, it can satisfy the requirement and can be applied to various wireless communication services. The multi-band orthogonal frequency division multiplexing (MB-OFDM) system, one of UWB system, is the wireless communication system that satisfies the transmission characteristic for UWB and so it can be used for various wireless communication services. In this paper, we propose a scheme that uses hierarchical modulation which is applied in digital video broadcasting system at the source and adaptive modulation based on the channel quality at the relays. The simulation results have shown that the proposed scheme has both the advantages of the increased throughput by 33% and similar BER performance to conventional scheme.

As an effective technique for combating multipath fading and for high-bit-rate transmission over wireless channels, orthogonal frequency division multiplexing (OFDM) is extensively used in modern digital television terrestrial broadcasting (DTTB) systems, such as the OFDM based Digital Video Broadcasting for Handheld (DVB-H) system, to support high performance bandwidth-efficient multimedia services. OFDM based DVB-H system is very sensitive to the nonlinear distortion at the transmitter and the carrier frequency offset at the receiver. The objective of this paper is to research and analyze the performance of the OFDM based DVB-H system in the presence of carrier frequency offset and nonlinear distortion under multipath fading channel. A closed form of symbol error probability is derived for the OFDM based DVB-H system in the presence of carrier frequency offset and nonlinear distortion under multipath fading channel. Theoretical results show closely matching with those obtained by simulations for the OFDM based DVB-H system in the presence of carrier frequency offset and nonlinear distortion under multipath fading channel.

Conventional wave propagation models for radio networks predict field strength levels only. Wideband wave propagation models however, include algorithms to characterize the radio channel. For digital radio systems the BER of the unprotected radio channel is an important parameter. In the approach presented in this paper, the influence of multipath propagation on different digital modulation schemes is investigated. The calculations are based on a 3D wave propagation model, which yields a field strength-delay spectrum (FDS). The FDS is defined by amplitudes and delays of incident waves, which contribute to intersymbol interference due to multipath propagation. Two algorithms for computation of the BER evaluating the FDS, for both linear and non-linear digital modulation schemes are presented. This paper focuses on GMSK- and PSK-modulation schemes, which are used in digital mobile radio systems (DCS1800, GSM, DECT) as well as in digital audio broadcast systems (DAB). An analysis of the performance of the different modulation schemes in difficult terrain is shown. >

이 논문에서는 계층변조를 적용하는 AT-DMB (advanced terrestrial digital multimedia broadcasting) 시스템에 적용할 수 있는 블라인드등화 기법을 제시하고 그 성능을 살펴본다. AT-DMB 시스템은 기존 T-DMB의 DQPSK (differential quadrature phase-shift keying) 신호와 역방향 호환성을 보장하고 더 높은 데이터 전송률을 지원하기 위해 16-QAM (quadrature amplitude modulation) 계층변조 방식을 적용한다. 이 결과 SNR (signal to noise ratio)에 따라 기존 T-DMB 심볼과 추가된 심볼은 서로 다른 판정오율 (decision error rate)을 가진다. 따라서 판정한 신호로부터 채널을 추정할 때 판정오율이 낮은 선순위 심볼과 판정오율이 높은 후순위 심볼의 신뢰도에 따라 다른 가중치를 줌으로써 판정치의 전체적인 신뢰도를 향상시킬 수 있다. 이 논문에서는 계층변조에 따른 비트 오율(bit error rate) 성능의 악화정도를 분석하고, 모의실험을 통해 판정신호의 신뢰도에 따라 가중치를 주는 제안방식이 가중치를 주지 않은 경우에 비해 비트 오율 성능이 향상됨을 확인하였다. In this paper, we propose a blind equalization method for advanced terrestrial digital multimedia broadcasting (AT-DMB) systems which use hierarchical modulation. The AT-DMB system adopts hierarchical 16-ary quadrature amplitude modulation (16-QAM) to ensure backward-compatibly with the differential quadrature phase shift keying (DQPSK) signal of the legacy terrestrial digital multimedia broadcasting (T-DMB) systems and to support higher transmission rate. Due to the hierarchical modulation, the conventional T-DMB signal and the additional signal have different error rate at same signal to noise ratio (SNR). By weighting the decided symbols differently according to the reliability of the symbols, i.e., high priority symbol with low error rate and low priority symbol with high error rate, we can improve the channel estimation accuracy. In this paper, we analyze SNR loss by hierarchical modulation and confirm it through simulations. Moreover, through simulations, we verify that the proposed weighting method improve BER compared to the no-weighting method.

Multichannel digital video broadcasting is now a practical reality. The new services made possible by this technology offer viewers much wider programme choice than current analogue systems. The wide flexibility offered to programme service providers includes the ability to trade the number of active programmes with the bit rates, and hence picture quality, within the capacity bounds of the system. The nature of the compression process is statistical and, when bit rates are minimised to maximise number of channels, occasionally quality compromises may be necessary if the bit rate cannot momentarily sustain quality. It is possible, by dynamic statistically driven allocation of available capacity, to avoid such momentary quality losses and thus improve the efficiency of the transmission system. This paper explores the relationship between picture quality and multiplex management, especially how the statistical nature of the compressed video can be matched to the MPEG packets and their allocation to services during multiplex processing.

This paper discusses Android security model and ways of enchasing it to meet the Conditional Access Systems requirements in Digital Video Broadcasting. Security enchantments involve usage of virtualization methods to separate CA and user systems in order to reduce its attack surface.