Optimal control of uncertain nonlinear quadratic systems

This article addresses the optimal tracking control problem with prescribed performance for uncertain nonlinear systems subject to input constraint and unknown disturbances. First, a fixed‐time monotonic convergence function is introduced to restrain tracking error, and a nonlinear mapping technique is employed to transform the constrained error into an unconstrained variable, then the fixed‐time output tracking issue is boiled down to the boundedness problem of the transformed variable. With the aid of a nonquadratic cost function, the input constraint is encoded into the optimization problem. To solve the unknown disturbances, an auxiliary system and an auxiliary disturbance policy are constructed, and the optimal control problem is formulated as a two‐player zero‐sum game. Moreover, a Hamilton–Jacobi–Isaacs (HJI) equation associated with this nonquadratic zero‐sum game is established to give the optimal control and the worst‐case disturbance policy solution. Subsequently, to avoid using knowledge of the system dynamics, three neural network approximators, namely, actor, critic, and disturbance, which are tuned online and simultaneously for approximating the solution of HJI, are constructed based on the integral reinforcement learning algorithm. Theoretical analysis shows that the reconstructed error system states and the weight estimation errors are semi‐globally uniformly ultimately bounded. Finally, the simulation study further tests the availability of the proposed control strategy.

International audience

An efficient method is introduced for solving optimal control and optimal parameter selection problems of nonlinear differential-algebraic systems involving general constraints. These infinite dimensional problems are converted into the finite dimensional optimization problems by using the control parametrization technique. Moreover, the transformed time locations for the control variables are included in such problems. As a result, optimal control problems become acausal optimal parameter selection problems. A modified version of differential evolution is introduced to solve these problems. The integration of the penalty functions is used to ensure the solution onto the feasible domain of the problems. Two industrial systems, a chemical reactor and a robotics arm, are used to illustrate the robustness and effectiveness of the method. The control effects can be improved by selecting the proper time locations as observed from the simulated results.

In general, optimal control problems rely on numerically rather than analytically solving methods, due to their nonlinearities. The direct method, one of the numerically solving methods, is mainly to transform the optimal control problem into a nonlinear optimization problem with finite dimensions, via discretizing the objective functional and the forced dynamical equations directly. However, in the procedure of the direct method, the classical discretizations of the forced equations will reduce or affect the accuracy of the resulting optimization problem as well as the discrete optimal control. In view of this fact, more accurate and efficient numerical algorithms should be employed to approximate the forced dynamical equations. As verified, the discrete variational difference schemes for forced Birkhoffian systems exhibit excellent numerical behaviors in terms of high accuracy, long-time stability and precise energy prediction. Thus, the forced dynamical equations in optimal control problems, after being represented as forced Birkhoffian equations, can be discretized according to the discrete variational difference schemes for forced Birkhoffian systems. Compared with the method of employing traditional difference schemes to discretize the forced dynamical equations, this way yields faithful nonlinear optimization problems and consequently gives accurate and efficient discrete optimal control. Subsequently, in the paper we are to apply the proposed method of numerically solving optimal control problems to the rendezvous and docking problem of spacecrafts. First, we make a reasonable simplification, i.e., the rendezvous and docking process of two spacecrafts is reduced to the problem of optimally transferring the chaser spacecraft with a continuously acting force from one circular orbit around the Earth to another one. During this transfer, the goal is to minimize the control effort. Second, the dynamical equations of the chaser spacecraft are represented as the form of the forced Birkhoffian equation. Then in this case, the discrete variational difference scheme for forced Birkhoffian system can be employed to discretize the chaser spacecraft's equations of motion. With further discretizing the control effort and the boundary conditions, the resulting nonlinear optimization problem is obtained. Finally, the optimization problem is solved directly by the nonlinear programming method and then the discrete optimal control is achieved. The obtained optimal control is efficient enough to realize the rendezvous and docking process, even though it is only an approximation of the continuous one. Simulation results fully verify the efficiency of the proposed method for numerically solving optimal control problems, if the fact that the time step is chosen to be very large to limit the dimension of the optimization problem is noted.

1 A Survey on Computational Optimal Control.- Issues in the Direct Transcription of Optimal Control Problems to Sparse Nonlinear Programs.- Optimization in Control of Robots.- Large-scale SQP Methods and their Application in Trajectory Optimization.- Solving Optimal Control and Pursuit-Evasion Game Problems of High Complexity.- 2 Theoretical Aspects of Optimal Control and Nonlinear Programming.- Continuation Methods In Boundary Value Problems.- Second Order Optimality Conditions for Singular Extremals.- Synthesis of Adaptive Optimal Controls for Linear Dynamic Systems.- Control Applications of Reduced SQP Methods.- Time Optimal Control of Mechanical Systems.- 3 Algorithms for Optimal Control Calculations.- Second Order Algorithm for Time Optimal Control of a Linear System.- An SQP-type Solution Method for Constrained Discrete-Time Optimal Control Problems.- Numerical Methods for Solving Differential Games, Prospective Applications to Technical Problems.- Construction of the Optimal Feedback Controller for Constrained Optimal Control Problems with Unknown Disturbances.- Repetitive Optimization for Predictive Control of Dynamic Systems under Uncertainty.- Optimal Control of Multistage Systems Described by High-Index Differential-Algebraic Equations.- A New Class of a High Order Interior Point Method for the Solution of Convex Semiinfinite Optimization Problems.- A Structured Interior Point SQP Method for Nonlinear Optimal Control Problems.- 4 Software for Optimal Control Calculations.- Automated Approach for Optimizing Dynamic Systems.- ANDECS: A Computation Environment for Control Applications of Optimization.- Application of Automatic Differentiation to Optimal Control Problems.- OCCAL: A mixed symbolic-numeric Optimal Control CALculator.- 5 Applications of Optimal Control.- A Robotic Satellite with Simplified Design.- Nonlinear Control under Constraints of a Biological System.- An Object-Oriented Approach to Optimally Describe and Specify a SCADA System Applied to a Power Network.- Near-Optimal Flight Trajectories Generated by Neural Networks.- Performance of a Feedback Method with Respect to Changes in the Air-Density during the Ascent of a Two-Stage-To-Orbit Vehicle.- Linear Optimal Control for Reentry Flight.- Steady-State Modelling of Turbine Engine with Controllers.- Shortest Paths for Satellite Mounted Robot Manipulators.- Optimal Control of the Industrial Robot Manutec r3.

In this paper, the infinite horizon optimal robust guaranteed cost control of continuous-time uncertain nonlinear systems is investigated using neural-network-based online solution of Hamilton-Jacobi-Bellman (HJB) equation. By establishing an appropriate bounded function and defining a modified cost function, the optimal robust guaranteed cost control problem is transformed into an optimal control problem. It can be observed that the optimal cost function of the nominal system is nothing but the optimal guaranteed cost of the original uncertain system. A critic neural network is constructed to facilitate the solution of the modified HJB equation corresponding to the nominal system. More importantly, an additional stabilizing term is introduced for helping to verify the stability, which reinforces the updating process of the weight vector and reduces the requirement of an initial stabilizing control. The uniform ultimate boundedness of the closed-loop system is analyzed by using the Lyapunov approach as well. Two simulation examples are provided to verify the effectiveness of the present control approach.

In this paper, an iterative adaptive dynamic programming (ADP) algorithm is developed to solve the optimal cooperative control problems for residential multi-battery systems. To avoid solving high-dimensional optimal control problems, we first constrain all the batteries at their worst performance, which transforms the multi-input optimal control problem into a single-input one. Based on the worst-performance optimal control law, the optimal cooperative control law for the residential multi-battery systems is obtained, where in each iteration, only a single-input optimization problem is implemented. Finally, numerical results are given to illustrate the performance of the developed algorithm.

The finite-horizon optimal control problem with input constraints consists in controlling the state of a dynamical system over a finite time interval (possibly unknown) minimising a cost functional, while satisfying hard constraints on the input. In this framework, the minimum-time optimal control problem and some related problems are of interest for both theory and applications. For linear systems, the solution of the problem often relies upon the use of bang-bang control signals. For nonlinear systems, the “shape” of the optimal input is in general not known. The control input can be found solving a Hamilton–Jacobi–Bellman (HJB) partial differential equation (PDE): it typically consists of a combination of bang-bang controls and singular arcs. In this paper, a methodology to approximate the solution of the HJB PDE is proposed. This approximation yields a dynamic state feedback law. The theory is illustrated by means of two examples: the minimum-time optimal control problem for an industrial wastewater treatment plant and the Goddard problem, i.e. a maximum-range optimal control problem.

Optimal control for multistage uncertain random dynamic systems with multiple time delays

Optimal control and properties of nonlinear multistage dynamical system for planning horizontal well paths

Beyond Lack of Compactness and Lack of Stability of a Coupled Parabolic-Hyperbolic Fluid-Structure System.- A Continuous Adjoint Approach to Shape Optimization for Navier Stokes Flow.- Recent Advances in the Analysis of State-constrained Elliptic Optimal Control Problems.- Fast and Strongly Localized Observation for a perturbed Plate Equation.- Representations, Composition, and Decomposition of C 1,1-hypersurfaces.- On Some Nonlinear Optimal Control Problems with Vector-valued Affine Control Constraints.- Weak Solutions to a Model for Crystal Growth from the Melt in Changing Magnetic Fields.- Lavrentiev Prox-regularization Methods for Optimal Control Problems with Pointwise State Constraints.- Nonlinear Feedback Solutions for a Class of Quantum Control Problems.- Optimal Feedback Synthesis for Bolza Control Problem Arising in Linearized Fluid Structure Interaction.- Single-step One-shot Aerodynamic Shape Optimization.- Shape Differentiability of Drag Functional for Compressible Navier-Stokes Equations.- Null-controllability for a Coupled Heat-Finite-dimensional Beam System.- Feedback Modal Control of Partial Differential Equations.- Optimization Problems for Thin Elastic Structures.- A New Non-linear Semidefinite Programming Algorithm with an Application to Multidisciplinary Free Material Optimization.- How to Check Numerically the Sufficient Optimality Conditions for Infinite-dimensional Optimization Problems.- Hidden Boundary Shape Derivative for the Solution to Maxwell Equations and Non Cylindrical Wave Equations.

In this paper, a learning-based predictive control (LPC) scheme is proposed for adaptive optimal control of discrete-time nonlinear systems under stochastic disturbances. The proposed LPC scheme is different from conventional model predictive control (MPC), which uses open-loop optimization or simplified closed-loop optimal control techniques in each horizon. In LPC, the control task in each horizon is formulated as a closed-loop nonlinear optimal control problem and a finite-horizon iterative reinforcement learning (RL) algorithm is developed to obtain the closed-loop optimal/suboptimal solutions. Therefore, in LPC, RL and adaptive dynamic programming (ADP) are used as a new class of closed-loop learning-based optimization techniques for nonlinear predictive control with stochastic disturbances. Moreover, LPC also decomposes the infinite-horizon optimal control problem in previous RL and ADP methods into a series of finite horizon problems, so that the computational costs are reduced and the learning efficiency can be improved. Convergence of the finite-horizon iterative RL algorithm in each prediction horizon and the Lyapunov stability of the closed-loop control system are proved. Moreover, by using successive policy updates between adjoint time horizons, LPC also has lower computational costs than conventional MPC which has independent optimization procedures between two different prediction horizons. Simulation results illustrate that compared with conventional nonlinear MPC as well as ADP, the proposed LPC scheme can obtain a better performance both in terms of policy optimality and computational efficiency.

A stochastic minimax optimal time-delay state feedback control strategy for uncertain quasi-integrable Hamiltonian systems is proposed. First, a stochastic optimal state feedback control problem of uncertain quasi-integrable Hamiltonian system with time delay in feedback control subjected to Gaussian white noise is formulated. Then, the time-delayed state feedback control forces are approximated by the control forces without time delay and the original problem is converted into a stochastic optimal state feedback control problem of an uncertain system without time delay. After that, by following a procedure based on the stochastic averaging method and stochastic differential game, the worst-case disturbances and the optimal controls are obtained from solving a Hamiltonian–Jacobi–Isaacs (HJI) equation. As an example, the stochastic minimax optimal state feedback control of a Duffing oscillator with parametric disturbances and time-delayed feedback control is worked out in detail to illustrate the procedure and effectiveness of the proposed control strategy.

This paper studies the problem of optimal parallel tracking control for continuous-time general nonlinear systems. Unlike existing optimal state feedback control, the control input of the optimal parallel control is introduced into the feedback system. However, due to the introduction of control input into the feedback system, the optimal state feedback control methods can not be applied directly. To address this problem, an augmented system and an augmented performance index function are proposed firstly. Thus, the general nonlinear system is transformed into an affine nonlinear system. The difference between the optimal parallel control and the optimal state feedback control is analyzed theoretically. It is proven that the optimal parallel control with the augmented performance index function can be seen as the suboptimal state feedback control with the traditional performance index function. Moreover, an adaptive dynamic programming ( ADP ) technique is utilized to implement the optimal parallel tracking control using a critic neural network ( NN ) to approximate the value function online. The stability analysis of the closed-loop system is performed using the Lyapunov theory, and the tracking error and NN weights errors are uniformly ultimately bounded ( UUB ) . Also, the optimal parallel controller guarantees the continuity of the control input under the circumstance that there are finite jump discontinuities in the reference signals. Finally, the effectiveness of the developed optimal parallel control method is verified in two cases.

This paper presents a functional model predictive control (MPC) approach based on an adaptive dynamic programming (ADP) algorithm with the abilities of handling control constraints and disturbances for the optimal control of nonlinear discrete-time systems. In the proposed ADP-based nonlinear MPC (NMPC) structure, a neural-network-based identification is established first to reconstruct the unknown system dynamics. Then, the actor-critic scheme is adopted with a critic network to estimate the index performance function and an action network to approximate the optimal control input. Meanwhile, as the MPC strategy can effectively determine the current control by solving a finite horizon open-loop optimal control problem, in the proposed algorithm, the infinite horizon is decomposed into a series of finite horizons to obtain the optimal control. In each finite horizon, the finite ADP algorithm solves the optimal control problem subject to the terminal constraint, the control constraint, and the disturbance. The uniform ultimate boundedness of the closed-loop system is verified by the Lyapunov approach. Finally, the ADP-based NMPC is conducted on two different cases and the simulation results demonstrate the quick response and strong robustness of the proposed method.