Optimal fuzzy tracking control with obstacles avoidance for a mobile robot based on Takagi-Sugeno fuzzy model

One of the common industrial structures that are used widely in many harbors and factories and buildings is overhead crane. Overhead cranes are usually operated manually or by some conventional control methods. In this paper, we propose a hybrid controller includes both position regulation and anti-swing control. According to Takagi-Sugeno fuzzy model of an overhead crane, a fuzzy controller designed with parallel distributed compensation and Linear Quadratic Regulation. With the Takagi-Sugeno fuzzy modeling, the nonlinear system is approximated by the combination of several linear subsystems in the corresponding fuzzy state space region. Then by constructing a linear quadratic regulation subcontroller according to each linear subsystem, a parallel distributed fuzzy LQR controller is designed. Further, the stability of the overhead crane with the parallel distributed fuzzy LQR controller is discussed. Simulation results illustrated the validity of the proposed control algorithm and it is compared with a similar method parallel distributed fuzzy controller.

In this paper, we propose a practical robust fuzzy control design scheme that achieves optimal tracking performance and requires limited accuracy in the plant model. The plant is identified as a fuzzy combination of Takagi-Sugeno type linear models, and the fuzzy controller is optimized by genetic algorithms according to both the tracking performance and the attenuation level. The procedure applies the lately proposed idea of the fuzzy Lyapunov function that is less conservative then the traditional Lyapunov function candidate approach, and ensures H∞ robust tracking. The effectiveness of the proposed scheme is demonstrated by the fuzzy tracking control of an uncertain chaotic system with external disturbance.

This paper addresses the issue of tracking the output of an activated sludge process using fuzzy integral control. First, the dynamics of the nonlinear process are modeled with a dynamic state space fuzzy model integrating the effect of external disturbances, and then an additional integral state of the output tracking error is introduced to obtain an augmented Takagi-Sugeno (TS) fuzzy model. The TS fuzzy model is able to describe the dynamics of complex nonlinear systems with an excellent degree of accuracy. It is formulated by fuzzy if-then rules which can give local linear representation of the overall nonlinear system. Second, the design of the fuzzy integral control is performed, in which the state feedback gains are obtained by solving linear matrix inequalities (LMI). The objective is to ensure trajectory tracking of an activated sludge process (ASP) by controlling two key variables: the substrate concentration and the level of dissolved oxygen. To assess the performance of the proposed control strategy, a comparative analysis is carried out with a gain scheduling PI (GS-PI) controller. Simulation results are provided to illustrate the effectiveness of the proposed approach. Where, the fuzzy integral control reduces the high energy consumption in water treatment plants.

Takagi-Sugeno (T-S) fuzzy model is a system described by a set of fuzzy if-then rules which give local linear representations of the underlying nonlinear system. Usually, a fuzzy control law is constructed by a set of controllers for each local linear representation to carry out the control of a T-S fuzzy system. While, simultaneous control addresses the stability and performance of multiple plants under a single feedback controller. In this paper, simultaneous linear control for nonlinear uncertain systems described by general T-S fuzzy model is considered. A procedure for simultaneous control of T-S fuzzy systems with parametric uncertainties is presented, by which robust reliability method is adopted to deal with uncertainties. Simultaneously linear controller design for an uncertain T-S fuzzy system is carried out by solving a problem of robust reliability based optimization, in which, both the robustness with respect to uncertainties and the control cost can be taken into account simultaneously. It is demonstrated by numerical simulation of the chaotic Lorenz system control that the presented method is effective and feasible.

This paper proposes the use Fuzzy logic controller and a Particle Swarm Optimization (PSO) based Linear Quadratic Regulator (LQR) controller for the balance of an electric unicycle. It also examines dynamics of the electric unicycle's schematic design, which has a backing seat for the passenger and is analogous to the Segway device equipped with a handle shaft for direction. A proportional derivative controller incorporated with a Fuzzy logic controller was designed for the suggested model of the electric unicycle for speed and position control (Fuzzy controller), and a Proportional Derivative (PD) controller was utilized to control the angle rate and angle of the unicycle. Comparison of the Fuzzy logic controller with a Particle Swarm Optimization (PSO) Linear Quadratic Regulator (LQR) controller was carried out based on error deviation and time response simulations. Command tracking or regulation of some initial state condition were examined and demonstrated by time based simulations of the modelled system. The results evidently indicate that the Fuzzy Proportional Derivative (PD) controller can effectively attain attitude equilibrium for the two wheeled unicycle and preventing it from falling down.

In this paper, we propose a new variant for incremental, evolving fuzzy systems extraction from data data streams, termed as GEN-FLEXFIS (short for Generalized Flexible Fuzzy Inference Systems). It builds upon the FLEXFIS methodology (published by the authors before) and extends it for generalized Takagi-Sugeno (TS) fuzzy systems, which implement generalized rotated rules in arbitrary position, employing a high-dimensional kernel rather than a connection of one-dimensional components (fuzzy sets) with t-norms. The extension includes the development of the evolving clustering learning engine, termed as eVQ-A, to extract ellipsoidal clusters in arbitrary position. Furthermore, a new merging concept based on a combined adjacency-homogenuity relation between two clusters (rules) is proposed in order to prune unnecessary rules and to keep the complexity of the generalized TS fuzzy systems low. Equipped with a new projection concept for high-dimensional kernels onto one-dimensional fuzzy sets, the new approach also provides equivalent conventional TS fuzzy systems, thus maintaining interpretability when inferring new query samples. GEN-FLEXFIS will be evaluated based on high-dimensional real-world data (streaming) sets in terms of accuracy versus final model complexity, compared with conventional FLEXFIS and other well-known (evolving) fuzzy systems approaches.

Over the past two decades, there has been a rapidly growing interest in approximating a nonlinear system by a Takagi-Sugeno (T-S) fuzzy model (Takagi & Sugeno, 1985). In general, this model is represented by using a set of fuzzy rules to describe a global nonlinear system in terms of a set of local linear models which are smoothly connected by fuzzy membership functions. Based on the T-S fuzzy model, recently, various fuzzy controllers have been developed under the so-called parallel-distributed compensation (PDC) scheme (in which each control rule is distributively designed for the corresponding rule of a T-S fuzzy model) and have been widely and successfully applied in fields ranging from aerospace to process control. The reason is because the fuzzy model-based control method provides a natural, simple and effective design approach to complement other nonlinear control techniques that require special and rather involved knowledge. Below are listed the main features of T-S model-based fuzzy control method: 1. It does not require severe structural assumptions on the plant model. 2. It preserves well-understood linear intuition. 3. It is naturally compatible with decompositions of the overall control problem. The decompositions are typically not hierarchical, and the interactions of sub-problems are captured by physical variables that are typically state variables in a more complete model of the overall system. 4. It enables control systems to respond rapidly to changing operating conditions. For this reason, it is important that the selected physical variables reflect changes in plant dynamics as operating conditions change. In fact, the T-S model-based fuzzy control method (of divide and conquer type) constructs a nonlinear controller, with certain required dynamic properties, by combining, in some sense, the members of appropriate family of linear time-invariant controllers. Here, nonlinear control design task is broken into a number of linear sub-problems, which enable linear design methods to be applied to nonlinear problems. Within the general framework of the T-S fuzzy model-based control method, a flurry of research activities have quickly yielded many important results on the design of fuzzy control systems by means of the following Lyapunov function approaches: 1. Common quadratic Lyapunov function approach (Tanaka & Sugeno, 1992; Tanaka et al, 1996; Wang et al, 1996; Cao & Frank, 2000; Assawinchaichote, 2004).

The primary aim of a vehicle's suspension system is to isolate the vehicle's main body from road irregularities, thus improving passenger comfort and ensuring optimal handling stability. This research discusses a stabilizing fuzzy control design for active vehicle suspension systems. The nonlinear model of the active suspension is then represented using a Takagi-Sugeno (TS) fuzzy model. The control approach uses a TS fuzzy controller utilizing an observer to estimate the state while reducing road disturbances. The closed-loop stability requirements of the vehicle utilizing the fuzzy controller and observer are expressed as a Linear Matrix Inequalities (LMI) problem, which can be effectively resolved through convex optimization methods. In this paper, we study the stability of the nonlinear automotive active suspension system with two degrees of freedom represented by a TS fuzzy model, where we will present the stabilization conditions by state feedback via the PDC (Parallel Distributed Compensation) control law and in the last section we introduced the TS fuzzy observer for the case of non-measurable premise variables.

Fuzzy optimal tracking control for nonlinear underactuated unmanned surface vehicles

This paper is concerned with reliable fuzzy tracking control for a near-space hypersonic vehicle (NSHV) subject to aperiodic measurement information and stochastic actuator failures. The NSHV dynamics is approximated by the Takagi–Sugeno fuzzy models and the stochastic failures are characterized by a Markov chain. Different with the existing tracking results on NSHV, only the aperiodic sampling measurements are available during system operation. To realize the tracking objective, a reliable fuzzy sampled-data tracking control strategy is presented. An appropriate time-dependent Lyapunov function is constructed to fully capture the real sampling pattern. The sampling-interval-dependent mean square exponential stability criterion with disturbance attenuation is then established. The solution of the tracking controller gains can be obtained by solving an optimization problem. Finally, the simulation studies on NSHV dynamics in the entry phase are performed to verify the validity of the developed fuzzy tracking control strategy.

This paper investigates network-based output tracking control for a T-S fuzzy system that can not be stabilized by a nondelayed fuzzy static output feedback controller, but can be stabilized by a delayed fuzzy static output feedback controller. By intentionally introducing a communication network that produces proper network-induced delays in the feedback control loop, a stable and satisfactory tracking control can be ensured for the T-S fuzzy system. Due to the presence of network-induced delays, the fuzzy system and the fuzzy tracking controller operate in an asynchronous way. Taking the asynchronous operation and network-induced delays into consideration, the network-based tracking control system is modeled as an asynchronous T-S fuzzy system with an interval time-varying delay. A new delay-dependent criterion for L2 -gain tracking performance is derived by using the deviation bounds of asynchronous normalized membership functions and a complete Lyapunov-Krasovskii functional. Applying a particle swarm optimization technique with the feasibility of the derived criterion, a novel design algorithm is presented to determine the minimum L2 -gain tracking performance and control gains simultaneously. The effectiveness of the proposed method is illustrated by performing network-based output tracking control of a Duffing-Van der Pol's oscillator.

The work treats the $H_{\infty}$ model reduction problem for two-dimensional (2D) discrete Takagi-Sugeno (T-S) fuzzy systems described by Fornasini-Marchesini local state-space (FM LSS) models. The problem to be solved in the paper concerns the design of a stable reduced-order modelables to approximate the original T-S fuzzy system with comparatively small and minimized $H_{\infty}$ performance index. Via the use of the Lyapunov functions, new design conditions guaranteeing the $H_{\infty}$ model reduction are established in terms of solutions to a set of linear matrix inequalities (LMIs). To highlight the importance of the suggested process, a practical application has been made.

We have constructively proved a general class of multi-input single-output Takagi-Sugeno (TS) fuzzy systems to be universal approximators. The systems use any types of continuous fuzzy sets, fuzzy logic AND, fuzzy rules with linear rule consequent and the generalized defuzzifier. We first prove that the TS fuzzy systems can uniformly approximate any multivariate polynomial arbitrarily well, and then prove they can also uniformly approximate any multivariate continuous function arbitrarily well. We have derived a formula for computing the minimal upper bounds on the number of fuzzy sets and fuzzy rules necessary to achieve the prespecified approximation accuracy for any given bivariate function. A numerical example is furnished. Our results provide a solid-theoretical basis for fuzzy system applications, particularly as fuzzy controllers and models.

The present work is concerned to solve the problem of nonlinear robotic control systems on the basis of Takagi- Sugeno (T-S) fuzzy models. In addition, controllability and observability studies for T-S fuzzy model systems are considered for Single-Input Single-Output (SISO) and Multiple-Input Multiple-Output (MIMO) systems. In particular, the robust pole assignment approach is extended to the fuzzy field. This approach is used to design fuzzy stabilizers and fuzzy observers directly on the overall T-S fuzzy system. The latter one is the representation of the nonlinear robotic system, which is linearized around certain operation regions. The suggested method is considered for either SISO or MIMO systems. Furthermore, the method allows inducing an arbitrary behavior into the fuzzy plant in a relatively easy way. Two examples are used to verify the effectiveness of the proposed approach. The results are compared with the well-known Parallel Distributed Compensation (PDC) method, which is designed on the basis of Linear Matrix Inequalities (LMIs).

In this paper, the Takagi-Sugeno (TS) fuzzy modelling and the fuzzy regulation theory are considered in order to design a fuzzy controller capable of taking the output of a fuzzy plant to the reference signal generated by an external system. It is well-known that TS fuzzy modelling allows the stabilizer to be obtained by means of numerical techniques. As a result, stability region defined by the fuzzy stabilizer is larger than the one obtained when a simple linear stabilizer is considered. On the other hand, a fuzzy regulator constructed from linear controllers does not solve the exact regulation problem in general [6], [12], [13], [15]. Therefore, a fully nonlinear regulator, defined on the overall TS fuzzy model, is considered in this work. The results are applied on a simple fuzzy model in order to illustrate the improvement achieved with the proposed approach.