Optimal PMU placement for reverse power flow detection

Stochastic flexible transmission operation for coordinated integration of plug-in electric vehicles and renewable energy sources

The integration of renewable energy sources (RESs) has become more attractive to provide electricity to rural and remote areas, which increases the reliability and sustainability of the electrical system, particularly for areas where electricity extension is difficult. Despite this, the integration of hybrid RESs is accompanied by many problems as a result of the intermittent and unstable nature of RESs. The extant literature has discussed the integration of RESs, but it is not comprehensive enough to clarify all the factors that affect the integration of RESs. In this paper, a comprehensive review is made of the integration of RESs. This review includes various combinations of integrated systems, integration schemes, integration requirements, microgrid communication challenges, as well as artificial intelligence used in the integration. In addition, the review comprehensively presents the potential challenges arising from integrating renewable resources with the grid and the control strategies used. The classifications developed in this review facilitate the integration improvement process. This paper also discusses the various optimization techniques used to reduce the total cost of integrated energy sources. In addition, it examines the use of up-to-date methods to improve the performance of the electrical grid. A case study is conducted to analyze the impact of using artificial intelligence when integrating RESs. The results of the case study prove that the use of artificial intelligence helps to improve the accuracy of operation to provide effective and accurate prediction control of the integrated system. Various optimization techniques are combined with ANN to select the best hybrid model. PSO has the fast convergence rate for reaching to the minimum errors as the Normalized Mean Square Error (NMSE) percentage reaches 1.10% in 3367.50 s.

The increasing integration of renewable energy sources into modern electric grids has led to a rise in uncertain factors that must be managed to maintain voltage security during reactive power optimization (RPO). Traditional deterministic RPO methods fail to account for these uncertainties, which can result in power grid security issues such as voltage violations. To address these challenges, this paper proposes a data-driven interval-based reactive power optimization method (IRPOM). The IRPOM represents the uncertainties associated with renewable power generation and load demands as intervals within the RPO problem formulation. The proposed method uses an improved particle swarm optimization algorithm to solve the RPO problem. In each iteration, the uncertain power flow is solved using the optimizing-scenarios method- (OSM-) based interval power flow (IPF) algorithm. This approach calculates the real power losses and checks whether state quantities, including voltage, power flow, and generator output, exceed their limits. Furthermore, a data-driven modeling approach is introduced to reduce the conservativeness of the IRPOM solutions. The effectiveness of the proposed method is demonstrated through detailed computational analysis on a modified IEEE 30-bus system. The results show that the proposed approach ensures economic efficiency while maintaining a low bus voltage threshold crossing probability close to zero.

The unprecedented growth of distributed renewable generation is changing the distribution network from passive to active, resulting in issues like reverse power flow, voltage violations, malfunction of protection relays, etc. To ensure the reliable and flawless operation of active distribution networks, an electrical device enabling active network management is necessary, and a hybrid distribution transformer offers a promising solution. This study introduces a novel hybrid transformer topology and multi-mode control strategy to achieve coordinated voltage and reverse power regulation in active distribution networks. The proposed hybrid transformer combines conventional transformer windings with a partially rated SiC-MOSFET-based back-to-back converter, reducing additional investment costs and enhancing system reliability. A multi-mode control strategy is proposed to facilitate the concurrent reverse power control and voltage violation mitigation of the presented hybrid transformer, allowing a smooth transition between the P–Q control mode and the V–f control mode. The control mode switching can be activated manually or autonomously in response to voltage violations or reverse power overloading. The effectiveness of the proposed hybrid transformer configuration and its control mode transition mechanism are examined through comprehensive case studies conducted in the PSCAD/EMTDC environment. The proposed HT design has been confirmed to achieve a voltage regulation range of ±20% of the nominal voltage and effectively regulate bidirectional active power flow within a range of −25% to 25% of the rated power.

Flexible AC Transmission Systems (FACTS) play a vital role in enhancing the stability, efficiency, and reliability of modern power systems. With the increasing complexity of power grids due to the integration of renewable energy sources, effective control of power flow, voltage regulation, and stability improvement are critical challenges. FACTS devices, such as Static Synchronous Compensator (STATCOM), Unified Power Flow Controller (UPFC), and Thyristor- Controlled Series Capacitor (TCSC), offer advanced solutions to mitigate these challenges by providing dynamic voltage control, reactive power compensation, and congestion management. This paper presents a comprehensive analysis of various FACTS devices, focusing on their control strategies, applications, and impact on improving power system performance. Simulation results demonstrate the effectiveness of FACTS devices in maintaining voltage stability, optimizing power flow, and minimizing transmission losses, ultimately contributing to a more efficient and resilient power grid.

The world is transitioning to utilise distributed generation (DG) to reduce social, economic and environmental effects. As DG penetration increases, determining the associated impacts on distribution networks is vital. This paper proposes a concept around sphere of influence of single and multiple DG units through line current analysis and integrated Sankey and Geospatial visualisation approaches. With the increasing integration of renewable energy sources and the need for grid stability, it becomes imperative to analyse the sphere of influence of DGs in geographic context. The main contribution of the paper is to present the visualisation techniques to determine the sphere of influence of DGs within power networks by considering single and multiple DGs. The proposed study combines the power of Sankey visualisation, a flow diagram technique, with geospatial data to gain insights into the DG sphere. The advantage of the proposed method is it acts as a visual lens to determine DG clusters, flow of power, coherency analysis, voltage support, resource allocation, operational planning, and grid resilience assessment. The proposed method is tested using 33 bus distribution network and visualisation on a representative geospatial map is carried out using Python library and Tableau.

This paper introduces a Modified Reptile Search Algorithm (MRSA) designed to optimize the operation of distribution networks (DNs) considering the growing integration of renewable energy sources (RESs). The integration of RESs‐based Distributed Generation (DG) systems, such as wind turbines (WTs) and photovoltaics (PVs), presents a complex challenge due to its significant impact on DN operations and planning, particularly considering uncertainties related to solar irradiance, temperature, wind speed, consumption, and energy prices. The primary objective is cost reduction, encompassing electricity acquisition, PV and WTs unit costs, and annual energy losses. The proposed MRSA incorporates two strategies: the fitness‐distance balance method and Levy flight motion, enhancing its searching capabilities beyond standard Reptile Search Algorithm and mitigating local optima issues. The uncertainties in load demand, energy prices, and renewable energy generation are represented through probability density functions and simulated using Monte Carlo methods. Evaluation involves typical bentchmark functions and a real 112‐bus Algerian DN, comparing MRSA's efficacy with other optimization techniques. Results indicate that the proposed DN optimization program with WTs and PVs integration reduces annual costs by 21.43%, from 6.2715E + 06 to 4.9270E + 06 USD, reduce voltage deviations by 21.67%, from 77.1022 to 60.4007 USD, and enhance system stability by 2.59%, from 2.3699E + 03 to 2.4314E + 03 USD, compared with the base case.

Voltage source converters (VSCs) have emerged as the key components in modern power systems, facilitating efficient energy conversion and flexible power flow control. Understanding the fundamental circuit model of VSCs is essential for their accurate modeling and analysis in power system studies. A basic voltage source converter circuit model connected to an LC filter is essential because it lowers the harmonic distortions and enhances the overall power quality of the micro-grid. This guarantees a clean and steady power supply, which is necessary for the integration of multiple renewable energy sources and sensitive loads. A comprehensive methodology for developing a basic circuit model of VSCs, focusing on the key components and principals involved, is presented in this paper. The methodology includes the modeling of space vector pulse-width modulation (SVPWM) as well as the direct quadrature zero synchronous reference frame. Different design controls, including the design of current control loop in the S-domain, the design of the direct current (DC) bus voltage control loop in the S-domain, and the design of the alternating current (AC) voltage control loop in the S-domain, are explored to capture the dynamic behavior and control strategies of VSCs accurately. The proposed methodology provides a systematic framework for modeling VSCs, enabling engineers and researchers to analyze their performance and assess their impact on power system stability and operation. Future studies can be conducted by using case studies and simulation scenarios to show the efficiency and applicability of the developed models in analyzing VSC-based power electronics applications, including high-voltage direct current (HVDC) transmission systems and flexible alternating current transmission systems (FACTS). The significance of this work lies in its potential to advance the understanding and application of VSCs, contributing to more resilient and efficient power systems. By providing a solid foundation for future research and development, this study supports the ongoing integration of renewable energy sources and the advancement of modern electrical infrastructure.

The large-scale integration of distributed photovoltaics (PV) can cause reverse power flow due to an imbalance between load and PV generation, altering the voltage profile in traditional distribution networks. The uncertainties in PV output can also cause voltage violations in the distribution network. Conventional methods for assessing static stability in voltage within such systems utilize continuous power flow techniques to calculate the load margin index, which provides a measure of how stable the voltage is in the distribution network. Nevertheless, the frequent load margin calculations in such methods result in significant computational costs, rendering them impractical for networks with distributed generators (DGs). Conventional static voltage stability assessment methods typically use continuation power flow (CPF) to calculate load margins but face significant computational bottlenecks in active distribution networks with distributed generation. For instance, even with improved power flow algorithms, a 33-bus system requires 58 iterations and about 0.3–0.5 seconds per analysis; in large-scale systems with tens of thousands of buses, total evaluation time can exceed 10 minutes. This paper introduces the holomorphic embedding load flow method (HELM), which accommodates different bus types (PI, PQ, PV) in active distribution networks. Building on HELM, a voltage partial sensitivity method is proposed, providing a criterion for evaluating the voltage stability in distribution networks. The sensitivity-based stability criteria using holomorphic embedding functions consider various DG operating conditions without requiring maximum load margin computation. The efficient calculation of these indexes makes the approach ideal for managing voltage in systems that include distribution networks with DGs. Finally, these indexes are used to manage voltage in active distribution networks, and the effectiveness of the method is confirmed through comprehensive numerical examples.

Widespread interconnection of Photovoltaic (PV) systems in the distribution system may create voltage rise problem. In this paper, a decentralized voltage control method by use of voltage regulators (VRs) and demand side management using consumer controllable load has been proposed for voltage rise compensation. The proposed method includes a novel determination method to find dynamic line drop compensation (LDC) parameters for a VR that has reverse power flow using the measured line current through VR and an optimal method that determines a dead band for a VR in order to lessens the number of tap operations while minimizing voltage deviation and violation. The obtained results show that voltage violation is extensively mitigated by the proposed method and no significant increment in tap operations of VR is encountered.

Electrification of the transportation sector can play an essential role in curbing fossil fuel scarcity and oil shortages in the world. Electric vehicles (EVs) can significantly reduce CO2 emissions, improve urban pollution. Apart from these advantages of EVs, they may also pose challenges to the distribution grid. Increasing penetration of EVs puts an extra burden and leads to affect the grid severely. Load congestions, voltage drops/regulation, overloading are some of the issues that might incur in the grid because of improper charging of EVs. The uncertain nature of EV owners makes it very difficult to predict the charging pattern. So the grid operator may face a daunting task to avoid overloading if huge EVs are charged without following any smart charging management strategies. We propose a framework that allows EV users to follow a well-coordinated charging schedule and fulfill various objectives like load variance minimization and social welfare maximization for both electric utility and EV owners. A proof of concept of distributed resource allocation for EV charging is implemented using the output consensus approach. Microgrids are components of a smart power distribution grid that can operate as a decentralized/localized grid when disconnected from the main grid. A microgrid can enhance the grid resiliency and provide adequate power to a community or a region in case of grid failure caused by natural disasters or any other disruptions. We also propose the optimal scheduling model for Distributed Energy Resources (DERs) including an EV charging station and battery energy storage system (BESS) in a community microgrid. This model also minimizes the cost incurred in operating the DERs, charging station, BESS, and the grid load. Due to the two-way power flow in the smart grid because of the EVs and distributed energy resources (DERs) involvement, the distribution system operator (DSO) must provide control & protection to equipment and manage the reverse power flow without violating system constraints. Artificial Intelligence (AI) leads the path for a promising smart grid future and helps the DSO tackle such challenges. Given the large size of data flow in the smart grid due to phasor measurement units (PMUs) and smart sensors, AI-based techniques help the grid operator to manage and analyze such data effectively and improve grid resiliency. Machine learning can help the grid operator forecast the uncertainty in supply-demand because of the integration of renewable energy sources. For system planning and operation, the utility needs to perform the

A reactive scheduling and control framework for integration of renewable energy sources with a reformer-based fuel cell system and an energy storage device

In modern power systems, efficient ground fault line selection is crucial for maintaining stability and reliability within distribution networks, especially given the increasing demand for energy and integration of renewable energy sources. This systematic review aims to examine various artificial intelligence (AI) techniques employed in ground fault line selection, encompassing artificial neural networks, support vector machines, decision trees, fuzzy logic, genetic algorithms, and other emerging methods. This review separately discusses the application, strengths, limitations, and successful case studies of each technique, providing valuable insights for researchers and professionals in the field. Furthermore, this review investigates challenges faced by current AI approaches, such as data collection, algorithm performance, and real-time requirements. Lastly, the review highlights future trends and potential avenues for further research in the field, focusing on the promising potential of deep learning, big data analytics, and edge computing to further improve ground fault line selection in distribution networks, ultimately enhancing their overall efficiency, resilience, and adaptability to evolving demands.

Robust model predictive control based voltage regulation method for a distribution system with renewable energy sources and energy storage systems

Microgrids (MGs) are a critical component in modern power systems, comprising interconnected loads and distributed energy resources (DERs) that can operate autonomously or in conjunction with the main grid. This review examines the role of MGs in advancing smart grid technologies, emphasizing the optimal integration of renewable energy sources (RES) and energy storage systems (ESS) to enhance their resilience and efficiency. It provides a detailed analysis of various MG architectures, including AC, DC, and hybrid topologies, alongside their operational modes. The paper highlights the pivotal role of control systems in optimizing energy management within MGs. Additionally, the challenges associated with MG integration, such as harmonic distortion, system stability, and regulatory constraints, are discussed. The review further explores the application of intelligent control strategies, including Fuzzy Logic Controllers (FLCs) and Genetic Algorithms (GAs), to optimize battery energy storage systems (BESS) and improve overall MG performance. The findings emphasize the need for innovative optimization techniques and intelligent control systems to overcome current limitations, thus enhancing the potential of MGs in future energy systems