Optimal signal multi-resolution by genetic algorithms to support artificial neural networks for exchange-rate forecasting

Exchange rate forecasting is one of the most common subjects among the forecasting problem field. Researchers and academicians from many different disciplines proposed various approaches for better exchange rate forecasting. In recent years, for solving the stated forecasting problem artificial neural networks have become successful tool to obtain solutions. Many different artificial neural networks have been used, developed and still developing for even better and trustable forecasts. In this study, TRY/USD exchange rate forecasting is modeled with different learning algorithms, activations functions and performance measures. Various Artificial Neural Network (ANN) models for better forecasting were investigated, compared and the obtained forecasting results interpreted respectively. The results of the application show that Variable Learning Rate Backpropagation learning algorithm with tan-sigmoid activation function has the best performance for TRY/USD exchange rate forecasting.

Laboratory experiments were used to estimate the hydraulic performance of emitters, i.e., the emitter flow variation (qvar) and manufacturer’s coefficient of variation (CVm), by measuring the discharge of different labyrinth-channel emitters at different operating pressures (P) and water temperatures (T). Considering the importance of the structural parameters of the labyrinth-channel emitters in drip irrigation design, which has been experimentally confirmed, artificial neural network (ANN) and gene expression programming (GEP) models were developed to predict qvar and CVm. The ANN and GEP models were trained and tested using structural parameters (including the number, height (H), and spacing of trapezoidal units and the flow path width and length) of different labyrinth-channel emitters, P and T as the input variables, and qvar and CVm as the outputs. Statistical criteria, including the coefficients of correlation (r), relative root-mean-square error (RRMSE), and mean absolute error (MAE), were used to examine the accuracy of the developed models. The ANN models exhibited good correlation with experimental values, with high r values 0.995 and 0.969 for qvar and 0.997 and 0.947 for CVm in the training and testing processes, respectively. The ANN models had lower RRMSE and MAE values than the GEP models. Furthermore, H was the dominant variable for obtaining the most accurate prediction model. The results confirm that the ANN models are superior to the GEP models for the prediction of the hydraulic performance of emitters.

Performance of radial basis and LM-feed forward artificial neural networks for predicting daily watershed runoff

Castellated steel beams (CSB) are an attractive option for the steel construction industry thanks to outstanding advantages, such as the ability to exceed large span, lightweight, and allowing flexible arrangement of the technical pipes through beams. In addition, the complex localized and global failures characterizing these structural members have led researchers to focus on the development of efficient design guidelines. This paper aims to propose an artificial neural network (ANN) model with optimal architecture to predict the load‐carrying capacity of CSB with a scheme of the simple beam bearing load located at the center of the beam. The ANN model is built with 9 input variables, which are essential parameters equivalent to the geometrical properties and mechanical properties of the material, such as the overall depth of the castellated beam, the vertical projection of the inclined side of the opening, the web thickness, the flange width, the flange thickness, the width of web post at middepth, the horizontal projection of inclined side of the opening, the minimum web yield stress, and the minimum flange yield stress. The output variable is the load‐carrying capacity of the CSB. With the optimal ANN architecture [9‐1‐1] containing one hidden layer, the performance of the ANN model is evaluated based on statistical criteria such as R2, RMSE, and MAE. The results show that the optimal ANN model is a highly effective predictor of the load‐carrying capacity of the CSB with the best value of R2 = 0.989, RMSE = 3.328, and MAE = 2.620 for the testing part. The ANN model seems to be the best algorithm of machine learning for predicting the CSB load‐carrying capacity.

According to the thought of intelligent forecasting and hybrid forecasting, an Intelligent Hybrid (IH) model for short-term traffic flow forecasting was presented. The IH model had three sub-models: History Mean (HM) model, Artificial Neural Network (ANN) model and the Fuzzy Combination (FC) model. By means of the good static stabilization character of HM method, the HM model predicted the traffic flow by the Single Exponential Smoothing method based on the historical traffic data. Otherwise, the ANN model was a 1.5-layer feed-forward neural network built by some common S-function neurons. Because of the strong dynamic nonlinear mapping ability of ANN, the ANN model can estimate the actual traffic flow in a very precise and satisfactory sense. The FC model mixed the two individual forecasting results by fuzzy logic and its output was regarded as the final forecasting of the traffic flow. Factual application results show that the IH model, which takes advantage of the unique strength of the HM model and the ANN model, can produce more precise forecasting than that of two individual models. Thus, the IH model can be an efficient method to the short-term traffic flow forecasting.

Genetic algorithm (GA) - Artificial neural network (ANN) modeling for the emission rates of toxic volatile organic compounds (VOCs) emitted from landfill working surface

Artificial neural network (ANN) based prediction and optimization of an organic Rankine cycle (ORC) for diesel engine waste heat recovery

The generalization ability of artificial neural networks (ANNs) and M5 model tree (M5Tree) in modeling reference evapotranspiration (ET 0 ) is investigated in this study. Daily climatic data, average temperature, solar radiation, wind speed, and relative humidity from six different stations operated by California Irrigation Management Information System (CIMIS) located in two different regions of the USA were used in the applications. King-City Oasis Rd., Arroyo Seco, and Salinas North stations are located in San Joaquin region, and San Luis Obispo, Santa Monica, and Santa Barbara stations are located in the Southern region. In the first part of the study, the ANN and M5Tree models were used for estimating ET 0 of six stations and results were compared with the empirical methods. The ANN and M5Tree models were found to be better than the empirical models. In the second part of the study, the ANN and M5Tree models obtained from one station were tested using the data from the other two stations for each region. ANN models performed better than the CIMIS Penman, Hargreaves, Ritchie, and Turc models in two stations while the M5Tree models generally showed better accuracy than the corresponding empirical models in all stations. In the third part of the study, the ANN and M5Tree models were calibrated using three stations located in San Joaquin region and tested using the data from the other three stations located in the Southern region. Four-input ANN and M5Tree models performed better than the CIMIS Penman in only one station while the two-input ANN models were found to be better than the Hargreaves, Ritchie, and Turc models in two stations.

The present study was carried out using artificial neural network (ANN) model for predicting the sodium hazardness, i.e., sodium adsorption ratio (SAR), percent sodium (%Na) residual, Kelly’s ratio (KR), and residual sodium carbonate (RSC) in the groundwater of the Pratapgarh district of Southern Rajasthan, India. This study focuses on verifying the suitability of water for irrigational purpose, wherein more groundwater decline coupled with water quality problems compared to the other areas are observed. The southern part of the Rajasthan State is more populated as compared to the rest of the parts. The southern part of the Rajasthan is more populated as compared to the rest of the Rajasthan, which leads to the industrialization, urbanization, and evolutionary changes in the agricultural production in the southern region. Therefore, it is necessary to propose innovative methods for analyzing and predicting the water quality (WQ) for agricultural use. The study aims to develop an optimized artificial neural network (ANN) model to predict the sodium hazardness of groundwater for irrigation purposes. The ANN model was developed using ‘nntool’ in MATLAB software. The ANN model was trained and validated for ten years (2010–2020) of water quality data. An L-M 3-layer back propagation technique was adopted in ANN architecture to develop a reliable and accurate model for predicting the suitability of groundwater for irrigation. Furthermore, statistical performance indicators, such as RMSE, IA, R, and MBE, were used to check the consistency of ANN prediction results. The developed ANN model, i.e., ANN4 (3-12-1), ANN4 (4-15-1), ANN1 (4-5-1), and ANN4 (3-12-1), were found best suited for SAR, %Na, RSC, and KR water quality indicators for the Pratapgarh district. The performance analysis of the developed model (3-12-1) led to a correlation coefficient = 1, IA = 1, RMS = 0.14, and MBE = 0.0050. Hence, the proposed model provides a satisfactory match to the empirically generated datasets in the observed wells. This development of water quality modeling using an ANN model may help to useful for the planning of sustainable management and groundwater resources with crop suitability plans as per water quality.

BackgroundThis study aimed to develop an artificial neural network (ANN) model for predicting synchronous organ-specific metastasis in lung cancer (LC) patients.MethodsA total of 62,151 patients who diagnosed as LC without data missing between 2010 and 2015 were identified from Surveillance, Epidemiology, and End Results (SEER) program. The ANN model was trained and tested on an 75/25 split of the dataset. The receiver operating characteristic (ROC) curves, area under the curve (AUC) and sensitivity were used to evaluate and compare the ANN model with the random forest model.ResultsFor distant metastasis in the whole cohort, the ANN model had metrics AUC = 0.759, accuracy = 0.669, sensitivity = 0.906, and specificity = 0.613, which was better than the random forest model. For organ-specific metastasis in the cohort with distant metastasis, the sensitivity in bone metastasis, brain metastasis and liver metastasis were 0.913, 0.906 and 0.925, respectively. The most important variable was separate tumor nodules with 100% importance. The second important variable was visceral pleural invasion for distant metastasis, while histology for organ-specific metastasis.ConclusionsOur study developed a “two-step” ANN model for predicting synchronous organ-specific metastasis in LC patients. This ANN model may provide clinicians with more personalized clinical decisions, contribute to rationalize metastasis screening, and reduce the burden on patients and the health care system.

<p>The scientific community has recognized the necessity for more efficiently selected inputs in artificial neural network models (ANNs) in river flows and has worked on this despite some shortcomings. Moreover, there is none or limited inclusion of ANN inputs coupled with atmospheric circulation under various patterns arising from the need of data downscaling for climate change predictions in hydrology domain. This paper presents the results of a novel multi-stage methodology for selecting input variables used in artificial neural network (ANN) models for river flow forecasting. The proposed methodology makes use of data correlations together with a set of crucial statistical indices for optimizing model performance, both in terms of ANN structure (e.g. neurons, momentum rate, learning rate, activation functions, etc), but also in terms of inputs selection. The latter include various previous time steps of daily areal precipitation and temperature data coupled with atmospheric circulation in the form of circulation patterns, observed river flow data and time expressed via functions of sine and cosine. Additionally, the no-linear behavior between river flow and the respective inputs is investigated by the ANN configuration itself and not only by correlation indices (or other equivalent contingency tools). The proposed methodology revealed the river flow of past four days, the precipitation of past three days and the seasonality as robust input variables. However, the temperature of three past days should be considered as an alternative against the seasonality. The produced models forecasting ability was validated by comparing its one-step ahead flow prediction ability to two other approaches (an auto regressive model and a genetic algorithm (GA)-optimized single input ANN). </p>

Monthly river flow forecasting using artificial neural network and support vector regression models coupled with wavelet transform

Purpose – This paper aims to predict the needle penetration force (NPF) in denim fabrics using the artificial neural network (ANN) and multiple linear regression (MLR) models based on the effects of various sewing parameters. Design/methodology/approach – In order to design the ANN and MLR models, four parameters including fabric weight, number of fabric layers, weave pattern, and sewing needle size are taken into account as the input parameters and NPF as the output parameter. According to these parameters, 140 samples of data were resulted. Each sample was tested five times. From these 140 data (input-output data pairs), 112 were used for training the ANN and MLR models and 28 samples were used to test the performance of ANN and MLR. Also, the NPF was measured on the Instron tensile tester to simulate sewing process. Findings – The results indicated that the NPF in denim fabrics can be well predicted in terms of sewing parameters by using ANN and MLR models, in which the ANN model exhibits greater performance than MLR (RANN=0.989> RMLR=0.901). Research limitations/implications – The NPF measurement method is limited at low speed. Originality/value – Using the ANN model for forecasting NPF in denim fabrics can help the garment manufactures to produce high-quality denim products and improve the sewing process through reducing seam damage. The NPF could be also measured in the cycle loading conditions similar to sewing machine process by using a special designed tools mounted on the Instron tensile tester.

ABSTRACTStatistical methods such as Poisson distribution, negative binomial regression (NB), and zero inflated negative binomial regression (ZINB) have generally been used in road safety studies to establish the complex relationships between variables. Over the last few years, the artificial neural networks (ANN) model has also been used. The ANN model does not have any prior limitations such as the equality condition of mean and variance observed in Poisson regression. However, though the ANN model has been used in the analysis of different accident types, to the best of our knowledge, no study has used the ANN model for establishing this relationship with truck accident data on divided multilane interurban roads. In this study, the road sections D750/07–D750/15 in Ankara–Aksaray–Eregli, Turkey, were considered and truck accident data from 2008 to 2011 were analyzed using NB and ANN. The analysis show that the ANN model has lower errors and higher R2 values than NB and performs slightly better than NB for predicting the number of trucks involved in accidents. Based on a comparison of performances the study concludes, that ANN could be used as an alternative model for analyzing truck accident data on divided multilane interurban roads in Turkey.

The post-harvest loss of agricultural commodities is a matter of universal concern. So, establishing cold storage near the production site is the need of the hour. Thus, the present work proposes a solar-biomass-powered absorption cold storage scheme for potatoes, considering the climatic conditions of developing country like India. The system considers that the primary energy requirement of the generator comes from an array of Evacuated Tube Collectors. The additional energy requirement is met using a biomass pellet burner for the continuous operation in off-grid mode. The capacity of the plant is determined to be about 70 kW. The effect of various performance parameters on the energetic and exergetic performance of the plant has been examined. An Artificial Neural Network (ANN) model is developed to forecast the system’s performance metrics, such as cooling capacity, Coefficient of Performance (COP), and refrigerant mass flow rate. The ANN model shows a coefficient of determination (R) of 0.99, establishing that the ANN model accurately predicts the output parameters. A genetic algorithm allows a population of many people to evolve to a condition that optimises ‘fitness’. Here, optimisation study employing GA indicates that the COP of the plant is 0.73, at the maximised operating condition.