Optimization of DV-hop localization algorithm in hybrid optical wireless sensor networks

According to the classical DV-HOP localization algorithm in wireless sensor networks with low precision, we put forward an improved algorithm,which adopted a new way to calculate the distance between unknown nodes and anchor nodes, then by using the weighted least squares method to calculate nodes coordinates. Matlab experimental simulation results show that under the same network environment, the algorithm can calculate the distance to reduce localization errors effectively, and improve the localization accuracy. Keywords-wireless sensor networks; node localization; DV-HOP algorithm

Due to the un-consideration of random distribution of DV-Hop algorithm in wireless sensor network, a big error caused by using of hop count between unknown and anchor nodes and the nearest anchor nodes’ average hop distance instead of the average hop distance of all the anchor nodes. An improved DV-HOP localization algorithm is proposed based on the traditional DVHOP localization algorithm aimed to reduce the localization error in this paper. The proposed algorithm introduce RSSI technique to modify the Hop count of DV-Hop and use the original DV-HOP algorithm to estimate the positions of anchor nodes which are already known, the error between estimation and real distance of anchor nodes so obtained are then to modify the Hop size. The simulation result shows that the proposed algorithm has a better performance in localization precision.

Recently, network localization systems that are based on inter-node ranges have received significant attention. Geographic routing has been considered an application which can utilize the location information from these localization systems. In this paper, we firstly recognize that sensor network localization algorithms generate positioning data with different error patterns compared to those networks where node positions are determined directly from GNSS measurements. Secondly, by simulating practical sensor network scenarios using data from our localization algorithm, we observe that existing geographic routing algorithms in wireless sensor networks (WSNs) adopt very simplistic methods in the treatment of position error, without due consideration of error distribution. Additionally, an insight is given into localization algorithms for WSNs with inhomogeneous error environments. Our observations represent an initial step toward a detailed understanding and design of efficient geographic routing algorithms in location aware WSNs.

In order to improve the location accuracy of unknown nodes in APIT algorithm in mobile wireless sensor networks, an improved APIT algorithm is proposed. A new test method called gravity center combination has been proposed for the InToOut and OutToIn errors in APIT. The algorithm further builds an anchor box by combining one-hop and two-hop information of nodes to limit the range and finally determine the location of unknown nodes to reduce the number of nodes that cannot be located. By improving the coverage and node availability, the positioning accuracy is eventually improved. The complexity is lowered by the lack of requirement of additional hardware, thus the improved algorithm is relatively easy to implement. The simulation results of the verification demonstrate that the updated algorithm improves the coverage ratio and the node usage efficiency compared with the other algorithm, thus makes the mobile node location more accurate.

Localization technology is the basis of practical applications of wireless sensor networks (WSNs). An improved localization algorithm for wireless sensor networks was proposed to reduce hop distance error and solve the premature convergence problem for the hybrid localization algorithm of DV-Hop and Bat (BADV-Hop). Based on the vector routing localization mechanism, an optimization method was designed to enhance the average hop distance accuracy. The linear weight strategy was used to correct searching velocity of bats. In addition, tendentious random disturbance was established to optimize location information. Experimental results showed that the localization accuracy of improved algorithm is 13% greater than that of DV-Hop algorithm and 3% greater than that of BADV-Hop algorithm. Moreover, the improved algorithm effectively reduced the maximum iterations and avoided premature convergence without any additional energy consumption compared to BADV-Hop algorithm.

Wireless Sensor Networks (WSNs) are being deployed in a variety of location-dependent applications, where the measurement of data is meaningless without accurate location. Many range-free algorithms were proposed in order to minimize the extra cost that appears in the ranged-based algorithms. Fuzzy logic provides a simple, fast and cost efficient way that can be used in range-free algorithms. In this paper, we propose a fuzzy-based collaborative localization algorithm for wireless sensor networks. Our proposed algorithm implements a Sugeno-type fuzzy system using a collaborative feedback communication scheme. The proposed algorithm provides more accurate localization estimation without any additional hardware implementation. The simulation results demonstrate the effectiveness of the proposed approach.

Wireless Sensor Networks (WSNs) are being deployed in a variety of location-aware applications, where the measurement of data is meaningless without accurate location. Many localization algorithms have been proposed in the literature. However, localization in threedimensional (3D) space has not been studied sufficiently. Also, artificial neural networks are not commonly used in localization. In this paper, we present a 3D localization algorithm for wireless sensor networks using artificial neural networks. In the proposed scheme, the idea of the 2D localization using neural network is extended to achieve a 3D localization with simplicity, location accuracy, mobility, and low cost. The simulation results depict the performance and the effectiveness of the proposed approach.

There are many algorithms demonstrated effectively for wireless sensor network (WSN). Some approaches aim to provide precise position and others demonstrate identification purpose. Even though there is a growing awareness for Zigbee-based sensor networks applications that an integrated coordination of hardware and software is needed for current applications. Especially, the previous research efforts could not clearly establish the impact of protocols or topology management issues. This paper intends to design a more convenient and efficient localization algorithm for Zigbee wireless sensor networks for the paint-ball game. A RSSI-based algorithm (Received Signal Strength Indicator, RSSI) and fixed nodes topology is developed to illustrate the performance of a novel mixed centroid localization algorithm within the paint-ball game scenarios. The experiment data and algorithm actually help the paint-ball game simulation project. The next step for this project is getting beacons motion figure which may expand this algorithm further applications.

In a Wireless Sensor Networks, localization techniques are needed to identify the exact position of an event. In this paper, we proposed Fuzzy Inference System (FIS) based target localization algorithm in a three-dimensional wireless sensor networks. In the proposed scheme, distance between anchor and target nodes are calculated by adding correction factor with hop size of an anchor node. The concept of fuzzy logic-based edge weight calculation is introduced to improve the localization accuracy. Simulation result shows that proposed scheme achieves less localization error and better accuracy as compared with existing localization technique.

SummaryRange‐free localization algorithms in wireless sensor networks have been an interesting field for researchers over the past few years. The combining of different requirements such as storage space, computational capacities, communication capabilities, and power efficiency is a challenging aspect of developing a localization algorithm. In this paper, a new range‐free localization algorithm, called PCAL, is proposed using soft computing techniques. The proposed method utilizes hop‐count distances as the data to train and build a neural network. Before feeding the data into the neural network for the purpose of training, the dimensionality of data is reduced by principal component analysis algorithm. The performance of the proposed algorithm is evaluated using simulation. The obtained results show that the proposed algorithm has a better performance in contrast to other algorithms based on storage space, communication overhead, and localization accuracy. Furthermore, the effect of various parameters on the PCAL algorithm is studied.

The location of sensors represents a relevant attribute in wireless sensor networks. In this article, we propose a distributed range-based localization algorithm for wireless sensor network. The algorithm is mainly based on an adaptively local circular searching area where each unknown sensor must find inside a position that minimizes the error distance with neighboring sensors using a local function. The new position of a sensor is broadcast to neighboring sensors allowing collaboratively to other sensors re-estimate their new positions. The iterative process is repeated until a stopping criterion is reached. The performance of the proposed algorithm is evaluated and compared with other state-of-the-art algorithms, and results indicate that the approach overcomes the other methods in both accuracy and time of convergence.

The wireless sensor networks (WSNs) are usually deployed among widely area for environmental monitoring, data collection and other applications. In order to reduce the energy consumption and extend the lifetime of WSNs, as well as receive the data quickly, a source-based data aggregation algorithm (SBDA) for clustering wireless sensor networks is proposed. The method aggregated the data from sensor nodes and marked different transmission priority for the data. Simulation results show that, compared to existing protocols, the proposed method achieves a longer life time, and a lower packet drop ratio.

A Wireless Sensor Network (WSN) is an emerging technology for a wide range of potential applications, including the environmental monitoring, medical, and target tracking systems. A WSN comprises a set of sensor nodes deployed in an area of interest. Sensor nodes are normally located in a dense and ad hoc manner, communicating each other in a multi-hop fashion in order to collect, process, and relay data. Most of WSNs are built on wireless, battery-powered sensor nodes. In such networks, it is hard to recharge or replace the energy-depleted nodes due to the desolate or harsh environment of the target area. Therefore, the efficient use of limited energy is a primary concern in designing protocols and usage strategies for WSNs. In this work an emergency scenario is considered and a WSN is used to monitoring the emergency area. To limit the power consumption, the WSN is activated only when the emergency occurs. Moreover an integrated protocol for routing and localization is developed to reduce communication, which is the most power-consuming operation in WSNs.

The sensor localization is an essential function for the wireless sensor networks applications. Based on the characteristics of the DV-hop algorithm, an improved algorithm is proposed for this range-free localization algorithm. The main principle of the proposed algorithm is giving more consideration on network topology properties and making improved hop size estimation through proper tradeoff between network's global and local features. The results of the simulation experiment show its superiority in localization accuracy.

Wireless sensor networks (WSNs) is emerging as a key tool for data acquisition in many applications, and localization algorithms of the sensors have a vital importance due to the intrinsic characteristics of this type of networks. The objective of this paper is to propose an algorithm of range-free localization for WSNs using a mobile robot equipped with a rotary directional antenna. This algorithm, denominated as the azimuthally defined area localization algorithm (ADAL), is executed in each sensor node and is based only on the analysis of the information received from the mobile robot, therefore is energy efficient and contributes to extend the lifetime of the sensor network. Additionally the proposed algorithm has the advantage of being simple and economical. The simulation results show that the proposed algorithm is a practical, effective and accurate method to localize sensor nodes in a WSN.