Optimizing high availability multi-controller placement in SDN/NFV 5G networks: a survey

In this chapter, we present a comprehensive end-to-end (E2E) network slicing framework for fifth-generation (5G) wireless and core networks and provide our vision on network slicing for beyond 5G (B5G) networks using artificial intelligence (AI) technologies. We first give an introduction on the 5G communication networks by specifying distinct 5G networking characteristics. As the key features of 5G pose challenges on quality-of-service (QoS)-oriented resource provisioning, a new concept of network slicing is presented, based on software-defined networking (SDN) and network function virtualization (NFV) technologies, to enhance the overall resource utilization while guaranteeing QoS isolation among services. We focus on developing specific network slicing solutions for both 5G wireless networks and core networks. In addition, the evolution of B5G networks is discussed in terms of a potential networking paradigm shift with new service key performance indicators (KPIs). To satisfy B5G service requirements, a framework of AI-assisted network slicing lifecycle is developed to automate the slice creation with reduced slice management complexity. A case study is presented to demonstrate the effectiveness of the proposed E2E network slicing solutions.Keywords5G communication networksNetwork slicingWireless networksRadio resource slicingCore networksComputing and transmission resource slicingBeyond 5G networksAI-assisted network slicingQoSE2E delay

In order to meet the traffic demand from diverse next generation wireless network applications and exponentially increasing mobile subscriptions, various 5G network architectures are proposed by leveraging Software Defined Networking (SDN) and Network Function Virtualization (NFV) technologies. Network slicing will be one of the 5G technologies that would support next-generation wireless applications over a shared network infrastructure. However, improper network slicing may lead to either over-provisioning or under-utilization of the underlying network infrastructure resources, especially the 5G core network. Over-provisioning of data plane components such as Serving Gateway (SGW) and Packet Data Network Gateway (PGW) can lead to higher CAPEX and OPEX to mobile operators. In this paper, we propose a novel auto-scaling approach called Bit rate Aware Auto Scaling (BAAS) that maintains a precise UE bit rate requirement in the network slices without over-provisioning of data plane resources.

SummaryIn 5G networks, mobile network and service functions run as software on general‐purpose servers that are distributed across remote sites. Dedicated networks, such as Internet of Things (IoT) network, disaster network, and immersive media network, are virtualized as software solutions on common hardware equipment. This means a new network can be easily provisioned by modifying the configurations of the network based on software‐defined networking (SDN) and network functions virtualization (NFV). Furthermore, the 5G core network architecture toward flat architecture with distributed cloud is a key solution for providing service flexibility and scalability in order to handle an explosive increase in mobile data traffic. To create heterogeneous networks and services on 5G networks, we propose a location‐aware network virtualization method that aims at minimizing the network load and resource cost by appropriately selecting the relevant cloud (including Virtual Machines (VMs), virtual network function [VNF] nodes, applications, and resources) and mobile core entities to provide the required virtual networking services that facilitate secure isolation of the virtual networks with automated resource convergence. In addition, we propose a selective mobility management scheme for service continuity in cases of user equipment (UE) handover. The numerical results show the trade‐off between the different cost factors, ie, network cost and service resources cost in terms of the number of deployed clouds on 5G core networks.

Software defined networking (SDN) and network function virtualization (NFV) are key enabling technologies in fifth generation (5G) communication networks for embedding service-level customized network slices in a network infrastructure, based on statistical resource demands to satisfy long-term quality of service (QoS) requirements. However, traffic loads in different slices are subject to changes over time, resulting in challenges for consistent QoS provisioning. In this paper, a dynamic flow migration problem for embedded services is studied, to meet end-to-end (E2E) delay requirements with time-varying traffic. A multi-objective mixed integer optimization problem is formulated, addressing the trade-off between load balancing and reconfiguration overhead. The problem is transformed to a tractable mixed integer quadratically constrained programming (MIQCP) problem. It is proved that there is no optimality gap between the two problems; hence, we can obtain the optimum of the original problem by solving the MIQCP problem with some post-processing. To reduce time complexity, a heuristic algorithm based on redistribution of hop delay bounds is proposed to find an efficient solution. Numerical results are presented to demonstrate the aforementioned trade-off, the benefit from flow migration in terms of E2E delay guarantee, as well as the effectiveness and efficiency of the heuristic solution.

The 5G network systems are evolving and have complex network infrastructures. There is a great deal of work in this area focused on meeting the stringent service requirements for the 5G networks. Within this context, security requirements play a critical role as 5G networks can support a range of services such as healthcare services, financial and critical infrastructures. 3GPP and ETSI have been developing security frameworks for 5G networks. Our work in 5G security has been focusing on the design of security architecture and mechanisms enabling dynamic establishment of secure and trusted end to end services as well as development of mechanisms to proactively detect and mitigate security attacks in virtualised network infrastructures. The focus of this paper is on the latter, namely the facilities and mechanisms, and the design of a security architecture providing facilities and mechanisms to detect and mitigate specific security attacks. We have developed and implemented a simplified version of the security architecture using Software Defined Networks (SDN) and Network Function Virtualisation (NFV) technologies. The specific security functions developed in this architecture can be directly integrated into the 5G core network facilities enhancing its security. We describe the design and implementation of the security architecture and demonstrate how it can efficiently mitigate specific types of attacks.

The discovery process of OPC Unified Architecture (OPC-UA) is well defined but lacks flexibility when implemented in large networks. While the standard provides concepts for local and global discovery services, the core assumption is that all clients and servers are aware of the discovery server(s) in the network. This dependency is a barrier for Plug-and-Play installations and is overcome by self announces via the multicast Domain Name System (mDNS), however, this scales badly with an increasing number of network nodes and deployed servers. We propose a discovery approach based on Software-Defined Networking (SDN) and Network Function Virtualization (NFV), that installs a plug-and-play mechanism for global OPC-UA discovery in modern virtualized networks.

The integration of software defined networking (SDN) and network function virtualization (NFV) is a promising approach to support flexible service deployment and provisioning. In particular, NFV enables a network service to be represented as one network service function chain, which is composed of several virtual network functions in a specific order. However, with regard to service provisioning in multidomain SDN networks, virtual network functions are deployed in several different SDN domains due to limited resource capacity of each SDN domain. It results in the network service deployment complexity increase and causes additional operating cost. On the other hand, most current network service deployment proposals are limited to static user request scenarios. How to effectively deploy network service across multiple SDN domains to satisfy dynamic service demands of end users is a challenging problem. To address the aforementioned challenge, in this paper, we study the problem of dynamic network service deployment across multiple SDN domains. Specifically, we first design a novel service deployment framework to support dynamic deployment and optimization of virtual network function in multidomain SDN networks. Then, we formulate the problem as a multiobjective optimization problem with the target of jointly minimizing resource consumption cost and operating cost. Furthermore, we transform the multiobjective optimization problem into a single objective optimization model and present an efficient heuristic service deployment approach to solve it by leveraging Dijkstra algorithm. The simulation results demonstrate that the proposed service deployment method is efficient and outperforms comparison methods in terms of service rejection ratio, resource cost, and operating cost.

This article addresses the joint switch and controller placement problem in a hybrid software-defined network (SDN), which is an intermediate step of transforming a traditional backbone network into a pure SDN. For a hybrid SDN, the quality of service (QoS) is a primary concern for ensuring service guarantee of a traditional network, while providing additional benefits of softwarization. In the SDN, the positions of SDN controllers determine the QoS parameters, such as network throughput and flow processing delays. Many existing solutions determine the controller locations to optimize the latency of network links and control plane load. However, there is a need to address the problem considering additional aspects of the hybrid SDN, such as SDN switch placement and incremental upgrades. In this article, we propose a priority-based SDN switch placement approach and an incremental controller placement approach for the hybrid SDN. Simulation results depict that the proposed scheme increases programmable traffic by 9.90% compared to the existing MapFirst scheme when the switch upgrade budget is <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">${\$}$</tex-math></inline-formula> 400 K. The proposed scheme decreases QoS violation by 20.89% compared to the Greedy approach with 0.3 million flows.

Chapter 3 - HetNet/M2M/D2D communication in 5G technologies

5G networks represent a paradigm shift from their 4G predecessors, engineered to cater to the burgeoning demands of densely populated areas and the high data throughput requirements of the Internet of Things (IoT) and smart city infrastructures. Beyond enhancing fundamental network attributes such as reliability, availability, and security, 5G introduces architectural innovations to accommodate these advanced needs. This paper delves into the architectural nuances of 5G, focusing primarily on the Standalone (SA) deployment method, distinguished by its utilization of network slicing. This approach leverages cutting-edge virtual network technologies, including Software-Defined Networking (SDN) and Network Function Virtualization (NFV), to forge virtual network slices tailored to diverse consumer needs. Such customization is imperative for meeting the expansive and varied connectivity demands characteristic of 5G networks.To navigate the complexities of 5G architecture, this study advocates for the adoption of Reference Architectures (RAs), which provide a high-level abstraction framework for dissecting and understanding intricate systems. By proposing a model that outlines the standalone architecture of 5G networks, our research lays the groundwork for evolving this model into a comprehensive RA for 5G. This foundational work is instrumental in equipping system designers with the tools necessary for generalizing systems to manage design and deployment challenges effectively, as well as the heterogeneity inherent in system components. Additionally, our proposed model facilitates the establishment of a common vocabulary, promoting a coherent understanding of component interactions and offering a unified system perspective. Ultimately, this paper contributes a pivotal model that not only enhances our comprehension of 5G network architecture but also paves the way for future advancements in network design and deployment, promising to significantly impact the development of smart cities and IoT ecosystems.Keywords: 5G, 5G architecture, Reference architecture, patterns. Network slicing, Network Function Virtualization, Virtual Network Function.

It is our great pleasure to welcome you to the 2018 ACM International Workshop on Security in Software Defined Networks & Network Function Virtualization - SDN-NFV Security'18. SDN-NFV Security'18 offers a unique opportunity by bringing together researchers from academic, industry, as well as government agencies to discuss security challenges faced by two emerging networking paradigms, Software-Defined Networking (SDN) and Network Function Virtualization (NFV). SDN-NFV Security'18 solicits the submission of original unpublished ideas in 6-page long papers and 4-page short papers that address the latest practices, experiences, and lessons learned on SDN and NFV security. The call for papers attracted submissions from Europe and the United States. SDN-NFV Security'18 accepted 3 full papers be presented in this workshop, after a rigorous review process (at least 4 reviews for each paper) and discussion phase. In addition, we have invited 8 papers (5 full papers and 3 short papers) from domain experts to be presented in the workshop.

In this era wireless technology gaining more popularity, people prefer wireless communication over wired communication due to mobility, scalability and ease of access. However, the traditional wireless network is complex, vendor dependent and inadequate feasibility to incorporate new services, protocols, and APIs. The rapid growth in wireless network raises many thoughtful challenges for network and telecom operators. On such grounds, Innovation of Software Defined Network (SDN) and network function virtualization (NFV) for mobile network opens a new arena of research. This research article presents future mobile Internet architecture (FMIA) with the integration of twin technologies, SDN and NFV that enable rapid access to Internet services. Moreover, the network manager can control services provided by ISPs through proposed architecture.

Service Function Chaining (SFC) serves the traffic of a specific service along an ordered set of Service Functions (SFs). SFC uses Software Defined Networking (SDN) and Network Function Virtualization (NFV) technologies to reach the deployment and removal of SFC in an appropriate time with minimal costs. However, during the life time of deployed SFCs, the SFs are exposed to the risk of overloading, which results in an end-to-end packets drop and high delay at the application level. This paper presents the concept of a Scalable SFC Orchestrator capable of deploying SF Chains following the ETSI NFV architectural model, as well as orchestrating the runtime phase by rerouting the traffic to a different path in case of overload of certain SF instances. Moreover, a selection algorithm is presented to build the updated paths after scaling. The Scalable Orchestration feature is implemented and added as a main feature to an SFC Orchestrator. Furthermore, it is integrated into a current NFV architecture and evaluated in an NFV environment making use of the Fraunhofer FOKUS Open Baton toolkit in an OpenStack and Open Daylight based environment.

Wireless Sensor Networks (WSNs) have a wide range of applications scenarios in computer vision, from pedestrian detection to robotic visual navigation. In response to the growing visual data services in WSNs, we propose a proactive caching strategy based on Stacked Sparse Autoencoder (SSAE) to predict content popularity (PCDS2AW). Firstly, based on Software Defined Network (SDN) and Network Function Virtualization (NFV) technologies, a distributed deep learning network SSAE is constructed in the sink nodes and control nodes of the WSN network. Then, the SSAE network structure parameters and network model parameters are optimized through training. The proactive cache strategy implementation procedure is divided into four steps. (1) The SDN controller is responsible for dynamically collecting user request data package information in the WSNs network. (2) The SSAEs predicts the packet popularity based on the SDN controller obtaining user request data. (3) The SDN controller generates a corresponding proactive cache strategy according to the popularity prediction result. (4) Implement the proactive caching strategy at the WSNs cache node. In the simulation, we compare the influence of spatiotemporal data on the SSAE network structure. Compared with the classic caching strategy Hash + LRU, Betw + LRU, and classic prediction algorithms SVM and BPNN, the proposed PCDS2AW proactive caching strategy can significantly improve WSN performance.

Network functions virtualization (NFV) technology is an emerging networking technology in the telecom industry which provides flexible deployment of network services by reducing the Operating Expenses and Capital Expenses. NFV is an innovative step to virtualize network services that usually run on fixed hardware. With the concept of NFV, services like routing, load balancing, deep packet inspectors and firewalls are packaged as virtual network functions (VNFs) on commodity hardware. NFV helps the service provider to flexibly add that service in the form of a virtual machine (VMs) without upgrading or buying a new hardware on the customer end. This allows a faster deployment of the all the network services with new innovations and helps in increasing great opportunities in the field of telecom-networking. This paper provides an information about NFV technology with its characteristics, enabling technologies, benefits, use cases and challenges. NFV architecture and its comparison with Software Defined Networking (SDN) technology is also presented in this survey paper.