Optimizing multi-chiller dispatch in HVAC system using equilibrium optimization algorithm

In this work, HVAC (Heating, Ventilation and Air Conditioning) systems applied in university buildings with control based on PMV (Predicted Mean Vote) and aPMV (adaptive Predicted Mean Vote) indexes are discussed. The building’s thermal behavior with complex topology, in transient thermal conditions, for summer and winter conditions is simulated by software. The university building is divided into 124 spaces, on two levels with an area of 5931 m2, and is composed of 201 transparent surfaces and 1740 opaque surfaces. There are 86 compartments equipped with HVAC systems. The simulation considers the actual occupation and ventilation cycles, the external environmental variables, the internal HVAC system and the occupants’ and building’s characteristics. In this work, a new HVAC control system, designed to simultaneously obtain better occupants’ thermal comfort levels according to category C of ISO 7730 with less energy consumption, is presented. This new HVAC system with aPMV index control is numerically implemented, and its performance is compared with the performance of the same HVAC system with the usual PMV index control. Both HVAC control systems turn on only when the PMV index or the aPMV index reaches values below −0.7, in winter conditions, and when the PMV index or the aPMV index reaches values above +0.7, in summer conditions. In accordance with the results obtained, the HVAC system guarantees negative PMV and aPMV indexes in winter conditions and positive PMV and aPMV indexes in summer conditions. The energy consumption level is higher in winter conditions than in summer conditions for compartments with shading, and it is lower in winter conditions than in summer conditions for compartments exposed to direct solar radiation. The consumption level is higher using the PMV control than with the aPMV control. Air temperature, in accordance with Portuguese standards, is higher than 20 °C in winter conditions and lower than 27 °C in summer conditions. In Mediterranean climates, the HVAC systems with aPMV control provide better occupants’ thermal comfort levels and less energy consumption than the HVAC system with PMV control.

Almost every building in the United States has a HVAC (Heating, ventilation, and air conditioning) system that relies on balancing Velocity Pressure and calculated CFM to properly control the atmosphere in a building. This is ensured and tested by Field Engineers whose job it is to maintain the efficiency and proper output of these HVAC systems. These systems are used to improve indoor air quality, control moisture and condensation, and contaminants while satisfying comfort needs of occupants. Just with any mechanical system, HVAC systems function efficiently with multiple formulas derived from calculus and physics. Every building is equipped with a system that needs to meet a certain threshold of air movement, measured in Cubic Feet per Minute (CFM), that creates a stable and comfortable indoor atmosphere by testing and balancing these systems with Velocity Pressure. Velocity Pressure is the base reading it takes to understand and adjust air movement within a HVAC system to guarantee the overall best quality of an indoor air environment. Once a measurement of Velocity Pressure, measured in inches of water column (in-WC) using a tool called a Flow Hood or Straight Pitot Tube, is taken then you can start to calculate flow readings and test if a fan is producing the correct amount of CFM that the system was built to produce and support. This testing is done by using a series of calculus and algebraic equations that takes area and velocity into consideration. When solving these formulas, it can then be determined if a HVAC system and its fans are producing the ideal amount of airflow and air quality to accurately produce the precise environment for any building.

Integrated optimization of the building envelope and the HVAC system in nZEB refurbishment

The main objective of this on-site study is to use a full-scale HVAC (Heating, Ventilating and Air-Conditioning) system installed in an office building in Taiwan for comparing the power consumption, energy-saving, and CO2reduction by variable primary flow (VPF) chilled water systems for controlling the HVAC. The on-site experimental results indicate that average power consumptions are 44,935 kWh for the constant volume (CV) chilled water systems, and 39,025 kWh for the VPF system. Approximately 19% of the maximum energy-saving rate can be achieved if the HVAC system is operated as a VPF system. Additionally, the reduced quantity of accumulated CO2emission varies from 0 to 44,186 kg with 0.623 kg-CO2kwh-1emission factor during the office hours of 08:00 (a.m.) to 20:00 (p.m.). The results demonstrate that switching the operation of an office building HVAC system from CV to VPF will significantly enhance energy savings and CO2reduction. This study is will offer useful information for evaluating an indoor environmental policy with respect to energy savings and CO2emission reduction for office HVACs used in subtropical regions.

Energy-efficient fuzzy model-based multivariable predictive control of a HVAC system

During the operation of HVAC (Heating, Ventilation, and Air-Conditioning) systems, precise energy consumption prediction plays an important role in achieving energy savings and optimizing system performance. However, the HVAC system is a complex and dynamic system characterized by a large number of variables that exhibit significant changes over time. Therefore, it is inadequate to rely on a fixed offline model to adapt to the dynamic changes in the system that consume tremendous computation time. To solve this problem, a deep neural network (DNN) model based on Just-in-Time learning with hyperparameter R (RJITL) is proposed in this paper to predict HVAC energy consumption. Firstly, relevant samples are selected using Euclidean distance weighted by Spearman coefficients. Subsequently, local models are constructed using deep neural networks supplemented with optimization techniques to enable real-time rolling energy consumption prediction. Then, the ensemble JITL model mitigates the influence of local features, and improves prediction accuracy. Finally, the local models can be adaptively updated to reduce the training time of the overall model by defining the update rule (hyperparameter R) for the JITL model. Experimental results on energy consumption prediction for the HVAC system show that the proposed DNN-RJITL method achieves an average improvement of 5.17% in accuracy and 41.72% in speed compared to traditional methods.

Modeling techniques used in building HVAC control systems: A review

Efficient management of heating, ventilation, and air conditioning (HVAC) systems is paramount for mitigating energy consumption and enhancing climate resilience in modern infrastructure. This review explores the significance of leveraging project management tools to optimize energy efficiency within HVAC operations, thus fostering a pathway towards climate resilience. The integration of project management methodologies offers a systematic approach to address challenges associated with energy consumption in HVAC systems, thereby facilitating informed decision-making processes. Firstly, the review delves into the pressing need for energy conservation in HVAC operations amidst escalating concerns over climate change and its adverse impacts. The imperative to minimize energy consumption in buildings, particularly through HVAC systems, is highlighted as a pivotal step towards achieving climate resilience and sustainability goals. Subsequently, the review outlines the role of project management tools in orchestrating effective strategies to enhance energy efficiency within HVAC operations. By employing techniques such as project scheduling, risk management, and resource allocation, project managers can streamline the implementation of energy-efficient measures, thereby optimizing HVAC system performance and reducing carbon emissions. Moreover, the review underscores the importance of data analytics and technological advancements in augmenting the efficacy of project management tools for energy efficiency in HVAC operations. Leveraging real-time data monitoring, predictive analytics, and IoT-enabled devices enables proactive maintenance and continuous optimization of HVAC systems, thereby maximizing energy savings and bolstering climate resilience. Furthermore, the review elucidates the potential benefits and challenges associated with the adoption of project management tools for energy efficiency in HVAC operations. While improved cost-effectiveness, environmental sustainability, and operational performance emerge as primary benefits, challenges such as initial investment costs, technological complexities, and organizational inertia necessitate careful consideration. This review advocates for the integration of project management tools as a viable approach to foster energy efficiency in HVAC operations, thereby paving the way towards enhanced climate resilience and sustainability in built environments. By embracing innovative methodologies and technological solutions, stakeholders can mitigate energy consumption, reduce greenhouse gas emissions, and fortify infrastructure against the impacts of climate change. Keywords: HVAC, Climate Resilience, Project Management, Energy, Review.

Predicting of fan speed for energy saving in HVAC system based on adaptive network based fuzzy inference system

A demand-response method to balance electric power-grids via HVAC systems using active energy-storage: Simulation and on-site experiment

Improving the control strategy of building HVAC (heating, ventilation, and air-conditioning) systems can lead to significant energy savings while preserving human comfort requirements. This paper focuses on the analysis of the optimal control strategy of the whole HVAC system itself (such as set point value curves for different parts, number control curves of different components) and the followed operating curves of each equipment and device. In order to have a better understanding of the optimal control strategy, performances of the conventional control strategies widely used in China are also shown in this paper.

Predictive maintenance is a preventive maintenance approach that is performed based on an online health assessment and allows for timely pre-failure interventions. It can diminish the cost of maintenance by reducing the frequency of maintenance as much as possible to avoid unplanned reactive maintenance, without incurring the costs associated with too frequent preventive maintenance. The main objective of predictive maintenance of heating, ventilation, and air conditioning (HVAC) systems is to predict when the HVAC equipment failure may occur. The benefits are numerous: planning of maintenance before the failure occurs, reduction of maintenance costs, and increased reliability. For this, the predictive maintenance of the HVAC systems is based on the historical data of the system for predicting the state of health of the system. The process of predictive maintenance application is composed of the Internet of Things (IoT) sensors that are installed inside the HVAC system, then the IoT platforms that help in collecting the signals coming from the sensors and converting them to existing databases. Afterward, the algorithms of application of predictive maintenance could be either knowledge-based approaches, physics-based approaches, or even data-driven-based approaches. A systematic literature review on the existing algorithms of HVAC predictive maintenance application is conducted in this paper to summarize the most used approach for predicting future failures in HVAC systems and to explain the benefits and limits of these algorithms.

Model-based energy flexibility analysis of a dry room HVAC system in battery cell production

Chapter 3 - Heating, Ventilating, and Air Conditioning Systems

Effects of intelligent strategy planning models on residential HVAC system energy demand and cost during the heating and cooling seasons