• Home
  • Search
  • Origins and Structure of Spike-Type Rotating Stall
  • Open Access IconOpen Access
  • Cite Icon273
  • https://doi.org/10.1115/1.4028494Copy DOI Icon

Origins and Structure of Spike-Type Rotating Stall

Show More
  • Abstract
  • Literature Map
  • References
  • Citations
  • Similar Papers
Abstract

In this paper, we describe the structures that produce a spike-type route to rotating stall and explain the physical mechanism for their formation. The descriptions and explanations are based on numerical simulations, complemented and corroborated by experiments. It is found that spikes are caused by a separation at the leading edge due to high incidence. The separation gives rise to shedding of vorticity from the leading edge and the consequent formation of vortices that span between the suction surface and the casing. As seen in the rotor frame of reference, near the casing the vortex convects toward the pressure surface of the adjacent blade. The approach of the vortex to the adjacent blade triggers a separation on that blade so the structure propagates. The above sequence of events constitutes a spike. The computed structure of the spike is shown to be consistent with rotor leading edge pressure measurements from the casing of several compressors: the centre of the vortex is responsible for a pressure drop and the partially blocked passages associated with leading edge separations produce a pressure rise. The simulations show leading edge separation and shed vortices over a range of tip clearances including zero. The implication, in accord with recent experimental findings, is that they are not part of the tip clearance vortex. Although the computations always show high incidence to be the cause of the spike, the conditions that give rise to this incidence (e.g., blockage from a corner separation or the tip leakage jet from the adjacent blade) do depend on the details of the compressor.

Similar Papers
  • Conference Article

Numerical Investigation on the Separated Flow of Axial Flow Stator in Diagonal Flow Fan

  • Jan 01, 2010
  • AIP conference proceedings
  • Yoichi Kinoue +8
  • Conference Article
  • Citations4

Effect of Boundary Layer Suction on the Corner Separation in a Highly Loaded Axial Compressor Cascade

  • Sep 21, 2020
  • Tian Liang +2
  • Research Article
  • Citations2

Vortices within a Three-Dimensional Separation in an Axial Flow Stator of a Diagonal Flow Fan

  • Jun 30, 2011
  • International Journal of Fluid Machinery and Systems
  • Yoichi Kinoue +2
  • Conference Article
  • Citations2

Influence of Moving End-wall on Tip Clearance Flow in Axial Compressor Cascades

  • Jan 09, 2006
  • 44th AIAA Aerospace Sciences Meeting and Exhibit
  • Yanhui Wu +1
  • Research Article
  • Citations19

Effects of leading-edge separation on the vortex shedding and aerodynamic characteristics of an elongated bluff body

  • Sep 18, 2020
  • Journal of Wind Engineering and Industrial Aerodynamics
  • Guiyue Duan +3
  • Research Article

J0501-1-3 軸流ファンにおけるモーダル波の発生点近傍での動翼先端流れ場(流体機械の研究開発におけるEFD/CFD(1))

  • Jan 01, 2009
  • The proceedings of the JSME annual meeting
  • Takahiro Nishioka +2
  • Conference Article

The Effect of Upstream Conditions on the Convective Transport Phenomena Over a Turbine Blade

  • Nov 06, 1994
  • Ping-Hei Chen +4
  • Conference Article
  • Citations28

Numerical Investigation of Three-Dimensional Separation in an Axial Flow Compressor: The Influence of Free-Stream Turbulence Intensity and Endwall Boundary Layer State

  • Jun 13, 2016
  • Ashley D Scillitoe +2
  • Conference Article
  • Citations4

Boundary Layer Measurement on the Blade Surface of a Multi-Stage Axial Flow Compressor

  • Jan 01, 2003
  • Y H Shin +2
  • Research Article
  • Citations8

Unsteady Flow Mechanism of Corner Separation Control Using Blade End Slots in a Highly Loaded Compressor Cascade

  • Jan 13, 2025
  • Journal of Turbomachinery
  • Yangwei Liu +2
  • Research Article
  • Citations18

Numerical study of unsteady flows with cavitation in a high-speed micro centrifugal pump

  • Jan 18, 2017
  • Journal of Thermal Science
  • Yeqiang Li +2
  • Research Article
  • Citations6

Topological analysis of plasma flow control on corner separation in a highly loaded compressor cascade

  • Oct 01, 2012
  • Acta Mechanica Sinica
  • Xiao-Hu Zhao +4
  • Conference Article
  • Citations23

Convective Transport Phenomena on the Suction Surface of a Turbine Blade Including the Influence of Secondary Flows Near the Endwall

  • Jun 03, 1991
  • P H Chen +1
  • Research Article
  • Citations3

Steady blowing control for tail stall flutter at large angle of attack

  • Sep 01, 2025
  • Chinese Journal of Aeronautics
  • Ziyu Wang +5
  • Research Article
  • Citations71

Analysis of Vortical Flow Field in a Propeller Fan by LDV Measurements and LES—Part I: Three-Dimensional Vortical Flow Structures

  • Jul 21, 2001
  • Journal of Fluids Engineering
  • Choon-Man Jang +2
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.