Output feedback robust MPC for LPV system with polytopic model parametric uncertainty and bounded disturbance

For quasi-linear parameter varying (quasi-LPV) systems with bounded disturbance, a synthesis approach of dynamic output feedback robust model predictive control (OFRMPC) with the consideration of input saturation is investigated. The saturated dynamic output feedback controller is represented by a convex hull involving the actual dynamic output controller and an introduced auxiliary controller. By taking both the actual output feedback controller and the auxiliary controller with a parameter-dependent form, the main optimization problem can be formulated as convex optimization. The consideration of input saturation in the main optimization problem reduces the conservatism of dynamic output feedback controller design. The estimation error set and bounded disturbance are represented by zonotopes and refreshed by zonotopic set-membership estimation. Compared with the previous results, the proposed algorithm can not only guarantee the recursive feasibility of the optimization problem, but also improve the control performance at the cost of higher computational burden. A nonlinear continuous stirred tank reactor (CSTR) example is given to illustrate the effectiveness of the approach.

Off-line approach to dynamic output feedback robust model predictive control

This article provides a solution to tube-based output feedback robust model predictive control (RMPC) for discrete-time linear parameter varying (LPV) systems with bounded disturbances and noises. The proposed approach synthesizes an offline optimization problem to design a look-up table and an online tube-based output feedback RMPC with tightened constraints and scaled terminal constraint sets. In the offline optimization problem, a sequence of nested robust positively invariant (RPI) sets and robust control invariant (RCI) sets, respectively, for estimation errors and control errors is optimized and stored in the look-up table. In the online optimization problem, real-time control parameters are searched based on the bounds of time-varying estimation error sets. Considering the characteristics of the uncertain scheduling parameter in LPV systems, the online tube-based output feedback RMPC scheme adopts one-step nominal system prediction with scaled terminal constraint sets. The formulated simple and efficient online optimization problem with fewer decision variables and constraints has a lower online computational burden. Recursive feasibility of the optimization problem and robust stability of the controlled LPV system are guaranteed by ensuring that the nominal system converges to the terminal constraint set, and uncertain state trajectories are constrained within robust tubes with the center of the nominal system. A numerical example is given to verify the approach.

In this paper, the fuzzy model-predictive control for a nonlinear system represented by a discrete-time Takagi–Sugeno model with norm-bounded disturbance is studied. An output feedback algorithm is proposed by parameterizing the infinite horizon control moves and estimated states into one free control move and one free estimated state followed by a dynamic output feedback law. Since the introduced free control move and free estimated state are decision variables that bring more degrees of freedom for the optimization, a larger feasibility region and better control performance can be achieved. By properly designing the constraints in the optimization problem, the recursive feasibility and the convergence of the closed-loop system to the neighborhood of the equilibrium are guaranteed. A numerical example is given to illustrate the effectiveness of the proposed algorithm.

For the input and output constraints and uncertainties in batch processes, a 2D output feedback robust constrained model predictive control (MPC) method is designed by combining iterative learning control (ILC), MPC and output feedback. Firstly, an equivalent 2D-FM closed-loop prediction model is established by combining with the proposed output feedback controller. Then an optimization performance index function with terminal constraint is constructed to study its control optimization. According to the designed optimization performance index and Lyapunov stability theory, the feasible MPC problem is obtained by solving the linear matrix inequalities (LMIs). At the same time, the gain of the new output feedback control law is given to ensure that the performance index reaches the minimum upper bound under the constraints of input and output. In order to solve the manual adjustment problem of some parameters in the performance index function, the particle swarm optimization (PSO) algorithm is introduced, and a better solution is found near the controller by using the search optimization method. Finally, taking the injection molding process as an example and comparing with the existing method without using PSO algorithms, it is proved that the above method is more feasible.

International audience

A robust dynamic output feedback controller synthesis algorithm considering H∞/H2performance and regional pole placement is addressed for a nonlinear system with parameter uncertainties and external disturbance. First, the formulation of a gain‐scheduled mixed‐objective robust dynamic output feedback controller for continuous‐time polytopic linear parameter varying (LPV) systems is presented. To reduce conservativeness, some auxiliary slack variables and parameter‐dependent Lyapunov functions are employed in addition to well‐established performance conditions. Then, sufficient conditions for the desired gain‐scheduled mixed‐objective robust dynamic output feedback controllers are cast into an efficiently tractable finite‐dimensional convex optimization problem in terms of linear matrix inequalities (LMIs). Finally, numerical simulation shows the validity of the proposed controller, which has good stability, strong robustness, satisfied disturbance attenuation ability, and smooth dynamic properties.

Effective recursive parallelotopic bounding for robust output-feedback control

SummaryThe present paper addresses an observer‐based output feedback robust model predictive control for the linear parameter varying system with bounded disturbance and noise subject to input and state constraints. The main contribution is that the on‐line convex optimization problem not only simultaneously optimizes the observer and controller gains to stabilize the augmented closed‐loop system but also incorporates the refreshment of bounds of the estimation error set. The optimization problem steers the nominal augmented closed‐loop system to converge to the origin, and the real augmented closed‐loop system bounded within robust positive invariant set converges to a neighborhood of the origin such that recursive feasibility of the optimization and robust stability of the controlled system are ensured. Two numerical examples are given to illustrate the effectiveness of the method.

An improved off-line approach for output feedback robust model predictive control

A note on the problem of semiglobal practical stabilization of uncertain nonlinear systems via dynamic output feedback

The deployment of Autonomous Underwater Vehicles (AUVs) for ocean observation is one of the important methods in marine scientific research. The stability of AUV attitude control determines the efficiency and safety of underwater operations. In practical systems, the actuators carried by AUVs have saturation, and the saturation of the actuators greatly affects the performance and stability of AUV attitude control. This article designs an anti-windup [Formula: see text] robust state feedback controller and an anti-windup [Formula: see text] robust dynamic output feedback controller for the pitch attitude control of AUVs to solve the pitch attitude control problem of AUVs subject to input constraints. Firstly, building a Linear-parameter varying (LPV) model for the AUV. Then, we design two anti-windup [Formula: see text] robust controllers based on LPV model. Simulation results verify the reasonable of LPV model and the effectiveness of proposed controllers. Proposed controllers can enable the system to quickly reach the desired attitude under input constraints.

To guarantee the control performance of the discrete system under unmeasurable state and partial actuator failure, a robust dynamic output feedback predictive fault-tolerant control method derived from switching strategy is developed. A new iterative error switching model is established, which both ensures tracking performance and lays the foundation for the development of the next switching controller. Based on this model, output feedback switching fault-tolerant controller is developed. Compared with conventional fault-tolerant control methods, the designed controller can be used under the case of unmeasurable states, and it is more fault tolerant and less conservative. According to the Lyapunov stability theory, the robust stability analysis is carried out under normal and fault conditions, respectively. Then, depending on the findings of the stability analysis, sufficient conditions to guarantee the stability of the closed-loop normal and faulty system are derived. Finally, the suggested method's efficacy is confirmed using the injection moulding process as an example.

Magnetorheological fluid (MRF) dampers have been utilized in semi-active air suspension (SAAS) due to their attractive advantages. This paper investigates a novel robust fuzzy output feedback controller for semi-active air suspension with MRF damper (SAAS-MRFD), considering time delay and actuator saturation. An aero-thermodynamics theory is first utilized to describe the nonlinear air spring. The damping force of the MRF damper is represented by a hyperbolic tangent model. The interval type-2 (IT-2) Takagi–Sugeno (T-S) fuzzy method is second employed to capture those nonlinearities of the air spring and MRF damper. Considering the difficulty to measure all states, a novel dynamic output feedback (DOF) controller is developed by an appropriate Lyapunov–Krasovskii function and the reciprocally convex technique with consideration of time delay, actuator saturation, and output constraints. The effectiveness of the proposed controller is validated by both simulation and a quarter-car test rig (QCTR). The results indicate that the proposed controller has better performance in vibration reduction than the recent similar controllers in the literature.

The need for cost-effective fuel economy improvements has driven the introduction of automatic transmissions with an increasing number of gear ratios. Incorporation of interlocking dog clutches in these transmissions decreases package space and increases efficiency, as compared to conventional dry or wet clutches. Unlike friction based clutches, interlocking dog clutches require very precise rotational speed matching prior to engagement. Precise engine speed control is therefore critical to maintaining high shift quality. This research focuses on controlling the engine speed during a gearshift period by manipulating throttle position and combustion phasing. Model predictive control (MPC) is advantageous in this application since the speed profile of a future prediction horizon is known with relatively high confidence. The MPC can find the optimal control actions to achieve the designated speed target without invoking unnecessary actuator manipulation and violating hardware and combustion constraints. This research utilizes linear parameter varying (LPV) MPC to control the engine speed during the gearshift period. Combustion stability constraints are considered with a control oriented covariance of indicated mean effective pressure model (COV of IMEP). The proposed MPC engine speed controller is validated with a high-fidelity 0-dimensional engine model with crank angle resolution. Four case studies, based on simulation, investigate the impact of different MPC design parameters. They also demonstrate that the proposed MPC engine controller successfully achieves the speed reference tracking objective while considering combustion variation constraints.