Parallel Modular Scheduler Design for Clos Switches in Optical Data Center Networks

Optical Switching Networks describes all the major switching paradigms developed for modern optical networks, discussing their operation, advantages, disadvantages and implementation. Following a review of the evolution of optical WDM networks, an overview of the future trends out. The latest developments in optical access, local, metropolitan, and wide area networks are covered, including detailed technical descriptions of generalized multiprotocol label switching, waveband switching, photonic slot routing, optical flow, burst and packet switching. The convergence of optical and wireless access networks is also discussed, as are the IEEE 802.17 Resilient Packet Ring and IEEE 802.3ah Ethernet passive optical network standards and their WDM upgraded derivatives. The feasibility, challenges and potential of next-generation optical networks are described in a survey of state-of-the-art optical networking testbeds. Animations showing how the key optical switching techniques work are available via the web, as are lecture slides (www.cambridge.org/9780521868006).

Scheduling traffic for maximum switch lifetime in optical data center fabrics

The explosive growth of data center (DC) traffic imposes unprecedented challenges on the current electrical switch-based data center networks (DCNs) with the bottleneck of limited bandwidth and high latency. Benefitting from transparency to the data rate and format, optical switching with theoretically infinite bandwidth could overcome the bandwidth bottleneck of electrical switching DCNs. However, DCNs normally deploy multitenant applications with a variety of DC traffic. It is hard to reconfigure the optical interconnections in real-time to provide adaptable bandwidth to the traffic with heterogeneous characteristics. Moreover, to improve the bandwidth utilization, statistical multiplexing is generally deployed in optical DCNs to forward the traffic flow in a time slot, which requires the network time to be precisely synchronized to all network nodes. For fast optical switches with a nanosecond switching configuration time, overall end node times must be synchronized at subnanosecond magnitude. In this paper, we propose and experimentally investigate a reconfigurable and picosecond-synchronized optical DCN (ReSAW) based on an arrayed waveguide grating router (AWGR) and the White Rabbit (WR) protocol. A scheduler based on a distributed field-programmable gate array is implemented in the proposed ReSAW to realize flexible wavelength configuration by controlling the fast laser array based on semiconductor optical amplifiers (SOAs) according to time slot and traffic priority. Moreover, the WR protocol is implemented in optical DCNs for what we believe is the first time to synchronize the time of the distributed top of racks (ToRs). The experimental demonstration validates that ReSAW achieves an average end-to-end latency of 317.44 ns and a precise synchronized time with an average 386 ps skew. When the load is 0.4, the packet loss after ReSAW reconfiguration is less than 1.83 × 10 − 6 , and the network latency is less than 1.73 µs. Based on the experimental parameters and results, the OMNeT++ simulation model is built to further verify the reconfigurability and scalability of the ReSAW network. Results show that the packet loss rate and latency performance increase 8.24% and 12.47%, respectively, at a load of 0.6 as the ReSAW network scales from 2560 to 40,960 servers compared to before the reconfiguration.

Extending the researches on wavelength switched optical networks (WSON), efficient integration of the novel optical packet switching network and wavelength switching-based optical circuit switching network technologies which offers both best-effort packet delivery and QoS guaranteed lightpath services has been being studied. In addition, researches on the optical-layer transparent data processing, such as all-optical wavelength multicasting, all-optical 3R regeneration, etc, are conducted simultaneously. It is believed that future innovative optical network services (INSes) would be built on these novel future-proof technologies, and foster colorful applications in the new generation networks. Before the wide applications of INS in different fields, there would be a foreseeable strong requirement for INS firstly posed by pioneer grid applications, e.g., e-science, e-government, and e-banking, etc, which would require the high-performance underlying networks. Our research here is motivated to glue the optical networks and grid applications by integrating lightpath, geographically distributed INS systems and grid resources (e.g., computers, storages, instruments, etc.), and finally offering an easy-to-use high performance networked grid computing environment-optical grid network (OGN) to user applications. In this paper, we introduce our research activities of a distributed optical grid network infrastructure (OGNI), and the creation of the future easy-to-use INS based on OGNI. The proposals have been validated through fieldtrial experiments over a developed WSON testbed.

Statistical multiplexing at the optical layer has been considered a critical requirement in order to build the next generation of ultra-high capacity optical transport networks in a cost-efficient manner. However, even today, the state of the art of commercially available optical core networks is based on mature wavelength switching and routing technologies, which lack a transport and control plane architecture that can support statistical traffic multiplexing with guaranteed Quality of Service (QoS) across a wide range of QoS parameters even if they can support fast reconfiguration at msec time scales. For several years, most research efforts have focused on the concepts of Optical Burst Switching (OBS) and Optical Packet Switching (OPS), which are based on the hybrid use of electronic nodes and optical switches to exploit Time Division Multiplexing (TDM) in order to achieve statistical multiplexing and dynamic resource reservation over optical networks. While burst switching has been experimentally proven as a technically feasible technique, its performance suffers especially under strict requirements for QoS guarantees. In this paper we evaluate the performance gains that can be achieved exploiting statistical multiplexing over a large scale core optical network and we demonstrate the efficiency of the CANON architecture (Clustered Architecture for Nodes in an Optical Network) as a viable alternative to OBS, which can achieve both targets for statistical multiplexing gains and QoS guarantees at the same time.

The wide deployment of wavelength-division multiplexing technology and new transmission techniques have resulted in significant increases in the transmission capacity in optical fibers, both in the number of wavelengths and the bandwidth of each wavelength channel. Meanwhile, the fast growth of the Internet demands more data switching capacity in the network in order to deliver high bandwidth to end users. Although the capacity of electronic routers has been increasing consistently in the past, optical switching appears to be a more cost-effective way to switch individual wavelengths. As the bit rate per wavelength channel continues to grow, optical subwavelength switching emerges as a new paradigm capable of dynamically delivering the vast bandwidth WDM offers. This article discusses one of such techniques, namely optical packet switching, and its performance perceived by end users in optical mesh networks. Specifically, our investigation reveals the benefit of using electrical ingress buffering and traffic aggregation to reduce packet-loss rate of optical packet-switched networks. Through simulation experiments, we present an evaluation of the network's TCP-level performance based on the proposed architecture.

We have already proposed a Gigabit Ethernet-Optical Switched Access Network (GE-OSAN) architecture that realizes longer transmission distances and achieves higher security than the conventional Passive Optical Network (PON). To confirm the technical feasibility of the architecture, we introduce here a GE-OSAN prototype system for down-stream transmission. We present the Optical Switching Module (OSM), which uses (Pb,La)(Zr,Ti)O3 (PLZT) optical packet switches, and show that it realizes switching within 10ns of the designed position in the Inter-Frame Gap (IFG). We also introduce an Optical Network Unit (ONU) with optical burst receiver that uses off-the-shelf commercial devices to reduce its cost; two types of an optical to electrical signal (O/E) converter are implemented for performance comparison. After testing both of them, we select the one that satisfies our acquisition time requirement of 64ns.

This book presents an in-depth deliberation on optical networks in four parts, capturing the past, present, and ensuing developments in the field. Part I has two chapters presenting an overview of optical networks and the enabling technologies. Part II has three chapters dealing with the single-wavelength optical networks: optical LANs/MANs, optical access networks using passive optical network architecture, SONET/SDH, optical transport network and resilient packet ring. Part III consists of four chapters on WDM-based optical networks, including WDM-based local/metropolitan networks (LANs/MANs) using single and multihop architectures over passive-star couplers, WDM/TWDM access networks as an extension of PONs with WDM transmission, WDM metro ring networks covering circuit-switched (using point-to-point WDM and wavelength-routed transmission) plus packet-switched architectures and WDM long-haul backbone networks presenting the offline and online design methodologies using wavelength-routed transmission. Part IV deals with some selected topics in six chapters. The first deals with transmission impairments and power-consumption issues in optical networks, while the next three chapters deal with the survivable optical networks, network control and management techniques, including GMPLS, ASON, and SDN/SDON, and datacenter networks using electrical, optical, and hybrid switching techniques. The final two chapters present elastic optical networks using flexible grid for better utilization of the optical-fiber spectrum and optical packet and burst-switched networks. The three appendices present the basics of the linear programming techniques, noise processes encountered in the optical communication systems, and the fundamentals of queuing theory and its applications in telecommunication networks. (238 words)

Traffic prediction and utilization of past information are essential requirements for intelligent and efficient management of resources, especially in optical data center networks (ODCNs), which serve diverse applications. In this paper, we consider the problem of traffic aggregation in ODCNs by leveraging the predictable or exact knowledge of application-specific information and requirements, such as holding time, bandwidth, traffic history, and latency. As ODCNs serve diverse flows (e.g., long/ elephant and short/mice), we utilize machine learning (ML) for prediction of time-varying traffic and connection blocking inODCNs.Furthermore,withthe predictedmean service time, passed time is utilized to estimate the mean residual life (MRL) of an active flow (connection). The MRL information is used for dynamic traffic aggregation while allocating resources to a new connection request. Additionally, blocking rate is predicted for a future time interval based on the predicted traffic and past blocking information, which is used to trigger a spectrumreallocation process (also called defragmentation) to reduce spectrum fragmentation resulting from the dynamic connection setup and tearing-down scenarios. Simulation results showthatML-based prediction and initial setup times (history) of traffic flows can be used to further improve connection blocking and resource utilization in space-division multiplexed ODCNs.

Packet contention is a major issue in asynchronous optical packet switching networks. Optical buffering, which is implemented by fiber delay lines (FDLs), is fundamental to many optical switch implementations for resolving contention. Most existing optical buffering implementations are output-based and require a huge amount of FDLs as well as larger switch sizes, which impose extra cost on the overall system. In this paper, we consider a shared optical buffering architecture which can reduce the buffer size at a switch. We propose an analytical model to evaluate the packet loss probability and the average delay For shared buffers at a single switch. We then compare the performance of output buffers to shared buffers under different granularities of FDLs. We observe that, by choosing an appropriate granularity, the shared buffering scheme can significantly reduce packet loss with much smaller switch sizes and fewer FDLs than the output buffering architecture. The accuracy of the analytical model is also confirmed by extensive simulation

Next generation High-Speed optical packet switching networks require components capable of recognising the optical header to enable on-the-fly accurate switching of incoming data packets to their destinations. This paper experimentally demonstrates a comparison between two different optical header recognition structures; A passive structure based on the use of Fiber Bragg Gratings (FBGs), whereas the active structure employs Opto-VLSI processors that synthesise dynamic wavelength profile through digital phase holograms. The structures are experimentally demonstrated at 10Gbps. Performance comparison between the two structures is also discussed. These optical header recognition structures are attractive for multiwavelength optical network and applications.

This paper instigate a design for optical packet switching using all optical wavelength conversion using cross gain modulation (XGM) in DWDM network. It integrate an arrayed waveguide grating (AWG) as its core switching matrix to manage packet switch traffic within the optical network. The packet switch has the capability to switch optical packet traffic through the AWG at a 10 Gbps with multicasting capability. In particular, we relate the entire study with the all the performance of a step and linear shared buffering strategy. The simulation result shows throughput and packet loss of different number of optical buffer with different offered transmission load for step buffer and linear shared buffer

Optical network is a high speed network thus reduce the huge bandwidth demands and increase the internet users. Optical burst switched network is an optical networking technique that allows dynamic sub wavelength. OBS is viewed as compromise the optical packet switching and optical circuit switching networks. OBS networks suffer from various security vulnerabilities. This paper propose a security threat named as Burst Circulating attack for OBS networks and provide defective mechanism for this attack. The ns2 simulator with modified nOBS patch is used simulate and verify the security parameter.

In this PhD dissertation multi-rate models are examined for the performance analysis of telecommunication networks through mathematical analysis and simulation. Particular emphasis is given to optical networks. The main goal is the development of analytical models for the calculation of network performance metrics, such as blocking probabilities, transmission delay and utilization of the common channel. The proposed analytical models are distinguished according to the network technologies. Three different technologies are considered: A) Wavelength routed optical networks. B) Optical access networks. C) Wireless Internet access networks. Multi-rate loss models are proposed for the performance evaluation of wavelength routed optical networks. Firstly, the case of a single link is considered and then a mesh all-optical network is examined. In addition, analytical models are proposed for Optical Packet Switching (OPS) networks, for the case of an all-optical OPS switch and of an OPS mesh network. Multi-rate analytical models are proposed for the evaluation of the performance of Passive Optical Networks (PONs) implementing different multiple access methods. For the case of Time Division Multiple Access (TDMA) the Ethernet PON is studied, which supports multiple service-classes. Regarding the Wavelength Division Multiplexing (WDM) PONs a hybrid WDM-TDMA PON is considered and the call-level performance is evaluated. Calls are distinguished by their arrival process, which can be random or quasi random, by their bandwidth requirements, which can be fixed of elastic and by their behavior during their service, which can be calls of fixed transmission rate or calls that alternate between ON and OFF periods. Finally multi-rate loss models are proposed for the case of Optical Code Division Multiple Access (OCDMA) PONs that take into account the user activity and the presence of additive noise in the transmission channel. For the performance analysis of wireless Internet access networks analytical models are proposed, which implement the IEEE 802.11 protocol or the IEEE 802.11e protocol. The proposed analysis calculated the saturation throughput and the end-to-end packet delay as a function of the Medium Access Control (MAC) delay and the queueing delay. In all cases the accuracy of the proposed models is validated through simulation.

Enhanced packet routing queuing model in optical burst switching network using queue-based dynamic optical route scheduling