Passivity-based neural network adaptive output feedback control for nonlinear nonnegative dynamical systems

This paper focuses on the problem of adaptive output feedback tracking control for a class of non-strict-feedback nonlinear systems with unknown control coefficients. By employing a linear state transformation, the original system is transformed to a new system for which control design becomes feasible. Then, after the introduction of a simple input-driven observer, an adaptive output feedback controller which contains only one parameter is developed for such systems by using backstepping technique and variable separation method. The designed controller ensures that all the signals in the closed-loop systems are Semi-globally Uniformly Ultimately Bounded (SGUUB).

Data-based adaptive neural network optimal output feedback control for nonlinear systems with actuator saturation

Adaptive disturbance rejection neural output feedback control of hydraulic manipulator systems

This paper discusses the problem of adaptive neural network output feedback control for a class of stochastic nonlinear strict-feedback systems. The concerned systems have certain characteristics, such as unknown nonlinear uncertainties, unknown dead-zones, unmodeled dynamics and without the direct measurements of state variables. In this paper, the neural networks (NNs) are employed to approximate the unknown nonlinear uncertainties, and then by representing the dead-zone as a time-varying system with a bounded disturbance. An NN state observer is designed to estimate the unmeasured states. Based on both backstepping design technique and a stochastic small-gain theorem, a robust adaptive NN output feedback control scheme is developed. It is proved that all the variables involved in the closed-loop system are input-state-practically stable in probability, and also have robustness to the unmodeled dynamics. Meanwhile, the observer errors and the output of the system can be regulated to a small neighborhood of the origin by selecting appropriate design parameters. Simulation examples are also provided to illustrate the effectiveness of the proposed approach.

This paper is concerned with the problem of adaptive neural output-feedback control for a class of nonlinear strict-feedback systems. In this research, radial basis function (RBF) neural networks (NNs) are used to approximate the unknown nonlinear functions and a state observer is constructed to estimate the immeasurable state variables. An adaptive neural output feedback control scheme is proposed via backstepping technique. The proposed design method can guarantee semi-global uniform ultimate boundedness (SGUUB) of all signals in the closed-loop system, and ensures the observer errors converge to a small neighborhood. At last, a simulation example is included to show the effectiveness of the proposed method.

Based on the backstepping technique, an adaptive neural network (NN) based output feedback controller is proposed to achieve a desired tracking performance for a class of discrete-time nonlinear systems, which are represented in non-strict-feedback form. The neural networks are utilized to approximate unknown functions in the systems. The adaptive output feedback controller needs only to adjust less adaptive parameters, therefore it is clear that the proposed approach can reduce on-line computation burden. It is proven that all the signals in the closed-loop system are semi-global uniformly ultimately bounded (SGUUB) and the tracking error converges to a small neighborhood of zero by choosing the design parameters appropriately. A simulation example is used to verify the effectiveness of the proposed approach.

The study presents an adaptive neural network output feedback tracking control scheme for a class of complicated agricultural mechanical systems. The scheme includes a dynamic gain observer to estimate the un-measurable states of the system. The main advantages of the authors scheme are that by introducing non-separation principle design neural network controller and the observer gain are simultaneously tuned according to output tracking error, the semi-globally ultimately bounded of output tracking error and all the states in the closed-loop system can be achieved by Lyapunov approach. With the universal approximation property of NN and the simultaneous parametrisation, no Lipschitz assumption and SPR condition are employed which makes the system construct simple. Finally the simulation results are presented to demonstrate the efficiency of the control scheme.

A crucial role is played by steering-angle prediction in the control of autonomous vehicles (AVs). It mainly includes the prediction and control of the steering angle. However, the prediction accuracy and calculation efficiency of traditional YOLOv5 are limited. For the control of the steering angle, angular velocity is difficult to measure, and the angle control effect is affected by external disturbances and unknown friction. This paper proposes a lightweight steering angle prediction network model called YOLOv5Ms, based on YOLOv5, aiming to achieve accurate prediction while enhancing computational efficiency. Additionally, an adaptive output feedback control scheme with output constraints based on neural networks is proposed to regulate the predicted steering angle using the YOLOv5Ms algorithm effectively. Firstly, given that most lane-line data sets consist of simulated images and lack diversity, a novel lane data set derived from real roads is manually created to train the proposed network model. To improve real-time accuracy in steering-angle prediction and enhance effectiveness in steering control, we update the bounding box regression loss function with the generalized intersection over union (GIoU) to Shape-IoU_Loss as a better-converging regression loss function for bounding-box improvement. The YOLOv5Ms model achieves a 30.34% reduction in weight storage space while simultaneously improving accuracy by 7.38% compared to the YOLOv5s model. Furthermore, an adaptive output feedback control scheme with output constraints based on neural networks is introduced to regulate the predicted steering angle via YOLOv5Ms effectively. Moreover, utilizing the backstepping control method and introducing the Lyapunov barrier function enables us to design an adaptive neural network output feedback controller with output constraints. Finally, a strict stability analysis based on Lyapunov stability theory ensures the boundedness of all signals within the closed-loop system. Numerical simulations and experiments have shown that the proposed method provides a 39.16% better root mean squared error (RMSE) score than traditional backstepping control, and it achieves good estimation performance for angles, angular velocity, and unknown disturbances.

This paper addresses the finite-time tracking issue for nonlinear quantized systems with unmeasurable states. Compared with the existing researches, the finite-time quantized feedback control is considered for the first time. By proposing a new finite-time stability criterion and designing a state observer, a novel adaptive neural output-feedback control strategy is raised by backstepping technique. Under the presented control scheme, the finite-time quantized feedback control problem is coped with without limiting assumption for nonlinear functions.

Decentralized output feedback adaptive NN tracking control of interconnected nonlinear time-delay systems with prescribed performance

Magnetic levitation system is a typical nonlinear and instable system. Based on the complexity and inaccuracy of modelling, in this paper identified magnetic levitation system using the speciality that neural network(NN) can approach any nonlinear function. A Radial Basis Function neural network (RBFNN) controller is designed based on the neural network adaptive control principle. This paper proposes a control method which combine neural network adaptive control method and state feedback control method based on RBFNN. A simulation of the system is proposed, and the result shows that RBFNN could approach magnetic levitation system very well, neural network adaptive state feedback controller has a good effect on this nonlinear system; this control system has a preferable stability and control property.

Underactuated systems are widely applied in industry, construction, manufacturing, etc., and the complex working environment puts forward higher demands for safety and transient performance. Hence, it is necessary to consider how to simultaneously ensure actuated and unactuated motion constraints by fewer control inputs, especially when systems suffer from model uncertainties, unavailable velocities, etc. Unfortunately, it is still a significant challenge to overcome in real applications and theoretical analysis. Additionally, most existing studies merely consider the specific control objects and few general methods are applicable to a class of underactuated systems. To this end, we design a new adaptive output-feedback controller for a class of uncertain underactuated systems. Compared with existing methods only handling actuated constraints, an important merit of this article is that by introducing the elaborately designed coupling term composed of actuated and unactuated constraints together, all state variables are kept within the preset time-variant ranges and converge to their desired values. Furthermore, a new Lyapunov function candidate is utilized to provide a theoretical guarantee. As far as we know, without the need of exact model knowledge and velocity feedback, this article provides the first solution to achieve accurate motion control and state constraints for both actuated and unactuated variables, which is meaningful both theoretically and practically. Meanwhile, the asymptotic stability of the equilibrium point for the closed-loop system is proven by utilizing Lyapunov techniques and Barbalat’s lemma. For verification, the presented controller is applied to underactuated overhead and rotary cranes, respectively, together with detailed theoretical analysis and experimental validations.

In this paper, an adaptive neural network (NN) output feedback control is investigated for incommensurate fractional-order permanent magnet synchronous motors under the condition of input saturation. First, a NN state observer is presented to obtain the ‘virtual estimate’ of angle speed, where the unknown function is approximated by the NN. Then, in order to solve the input saturation problem, an auxiliary system is developed under fractional-order framework. Next, the command filtered technology with an error compensation mechanism is used to handle the ‘explosion of complexity’ in backstepping and remove the filtering errors. In addition, the frequency distributed model is utilized such that the Lyapunov theory is available in the backstepping design and the system stability is demonstrated. Finally, numerical simulations confirm the availability of the proposed design.

This paper focuses on the problem of adaptive output feedback tracking control for a class of nonstrict-feedback nonlinear systems with unknown control coefficients and quantized input. The difficulty from the unknown control direction is solved by using the linear state transformation and the Nussbaum gain function(NGF) approach. Based on the combination of input-driven observer, backstepping technique, neural network(NN) parametrization and variable separation method, a novel adaptive output feedback quantized control scheme involving only one adaptive parameter is developed for such systems. The designed quantized controller ensures that all signals of closed-loop systems are semi-globally uniformly ultimately bounded (SGUUB), and the tracking error converges to an adjustable neighborhood of the origin. Finally, a numerical example is provided to demonstrate the effectiveness of the proposed control design.

Observer-based adaptive neural control of robotic systems with prescribed performance