Path Planning for Robots Based on Improved Genetic Algorithm

An object pick-and-place system with a camera, a six-degree-of-freedom (DOF) robot manipulator, and a two-finger gripper is implemented based on the robot operating system (ROS) in this paper. A collision-free path planning method is one of the most fundamental problems that has to be solved before the robot manipulator can autonomously pick-and-place objects in complex environments. In the implementation of the real-time pick-and-place system, the success rate and computing time of path planning by a six-DOF robot manipulator are two essential key factors. Therefore, an improved rapidly-exploring random tree (RRT) algorithm, named changing strategy RRT (CS-RRT), is proposed. Based on the method of gradually changing the sampling area based on RRT (CSA-RRT), two mechanisms are used in the proposed CS-RRT to improve the success rate and computing time. The proposed CS-RRT algorithm adopts a sampling-radius limitation mechanism, which enables the random tree to approach the goal area more efficiently each time the environment is explored. It can avoid spending a lot of time looking for valid points when it is close to the goal point, thus reducing the computing time of the improved RRT algorithm. In addition, the CS-RRT algorithm adopts a node counting mechanism, which enables the algorithm to switch to an appropriate sampling method in complex environments. It can avoid the search path being trapped in some constrained areas due to excessive exploration in the direction of the goal point, thus improving the adaptability of the proposed algorithm to various environments and increasing the success rate. Finally, an environment with four object pick-and-place tasks is established, and four simulation results are given to illustrate that the proposed CS-RRT-based collision-free path planning method has the best performance compared with the other two RRT algorithms. A practical experiment is also provided to verify that the robot manipulator can indeed complete the specified four object pick-and-place tasks successfully and effectively.

In this paper a novel combination of data structures and algorithms is presented as a fast and efcient practical approach to path planning for unmanned vehicles. This approach utilizes an architecture that integrates effective obstacle representation using an efcient Quadtree data structure, with path planning based on a modied Rapidly-exploring Random Tree (RRT) algorithm, and a path pruning technique based on Dijkstra’s algorithm, resulting in rapid discovery of sub-optimal feasible paths. One of the computationally expensive steps of the RRT algorithm is checking RRT segments for collision with obstacles. To address this problem, an efcient obstacle representation using Quadtrees is implemented enabling fast segment checks. While the RRT approach is guaranteed to nd a feasible path through complex obstacle elds with the probability of discovery approaching one as the number of iterations increases, the resulting paths may be far from optimal as the only criterion embedded in the RRT search is feasibility. For this reason, the paths generated by the RRT algorithm are passed through Dijkstra algorithm that nds a shortest obstacle-free path among the points on the path. Dijkstra algorithm that re-samples the segments of the path and nds the shortest path among the new points is implemented resulting in paths that are very close to the optimal ones. To speed up the computation, the basic search algorithm is implemented as a dual RRT from the initial and nal points. To account for motion transients along the path, a suitable size corridor is introduced, assuring that the vehicle has enough room for maneuvering among the obstacles. This computationally efcient architecture lends itself to real-time implementation for both pre-planning with known obstacles as well as rapid reactive re-planning in the presence of new pop-up obstacles. The proposed technique is evaluated using several challenging path-planning examples characterized by a large number of non-convex constraints arising in cluttered obstacle elds with known and unknown obstacles. A modication that allows an easy way to introduce vehicle dynamics constraints or actuation failures is also implemented. Algorithms have been implemented for two as well as three dimensional path planning applications.

Double manipulator path planning is the basis for overhead line live working robot to complete the task. The previous dual manipulator motion path planning method has some problems, such as low success rate, low convergence speed, unstable guidance, and easy to lead to path discontinuity in complex environment. Therefore, this paper proposes a decoupling motion planning method for two manipulators of live working robot based on hybrid RRT (Rapidly-Exploring Random Trees) algorithm. The hybrid RRT algorithm combines target offset RRT algorithm, bidirectional RRT algorithm and dynamic expansion RRT algorithm. MATLAB robot toolbox is used to simulate the motion path planning of 6-DOF double manipulator of overhead line live working robot. The results show that the method proposed in this paper can realize the loose coupling and efficient collision free motion planning of double manipulator of live working robot.

PurposeThe purpose of this paper is to present a new nested rapidly‐exploring random tree (RRT) algorithm for fault tolerant motion planning of robotic manipulators.Design/methodology/approachAnother RRT algorithm is nested within the general RRT algorithm. This second nested level is used to check whether the new sampled node in the first nested level is fault tolerant. If a solution can be found in the second nested RRT, the reduced manipulator after failures at the new sampled node can still fulfill the remaining task and this new sampled node is added into the nodes of RRT in the first level. Thus, the nodes in the first level RRT algorithm are all fault tolerant postures. The final trajectory joined by these nodes is also obviously fault tolerant. Besides fault tolerance, this new nested RRT algorithm also can fulfill some secondary tasks such as improvement of dexterity and obstacle avoidance. Sufficient simulations and experiments of this new algorithm on fault tolerant motion planning of robotic manipulators are implemented.FindingsIt is found that the new nested RRT algorithm can fulfill fault tolerance and some other secondary tasks at the same time. Compared to other existing fault tolerant algorithms, this new algorithm is more efficient.Originality/valueThe paper presents a new nested RRT algorithm for fault tolerant motion planning.

The online cooperative path planning problem is discussed for multi-quadrotor maneuvering in an unknown dynamic environment. Based on the related basic concepts, typical three-dimensional obstacle models, such as spherical and cubic, and their collision checking criteria are presented in this article. An improved rapidly exploring random tree (RRT) algorithm with goal bias and greed property is proposed based on the heuristic search strategy to overcome the shortcomings of the classical RRT algorithm. Not only are the kinematic constraints of the quadrotor established but the time and space coordination strategy matching with the improved RRT algorithm is also presented in this article. Furthermore, a novel online collision avoidance strategy according to the partial information of the surrounding environment is proposed. On the basis of the above work, a distributed online path planning strategy is proposed to obtain the feasible path for each quadrotor. Numerical simulation results show that the improved RRT algorithm has better search efficiency than the classical RRT algorithm. And the satisfactory path planning and path tracking results prove that the above model and related planning strategies are reasonable and effective.

The current path planning algorithms such as A-star(all stars) algorithm and RRT (Rapidly-exploring Random Trees) algorithm can meet the obstacle avoidance planning of the 6-DOF robot, but the smoothness of the path is not considered. Working in an unreasonable path for a long time will produce a great load on the joints of the 6-DOF robot and seriously affect its life. In this paper, we use reinforcement learning reconcile A-star algorithm and RRT algorithm for smooth path planning of the robot. Experimental results show that compared with A-star algorithm and RRT algorithm, the fusion algorithm has smoother path and more reasonable time.

To ensure the safe production of mines, the intelligent trend of underground mining operations is gradually advancing. However, the operational environment of subterranean mining is intricate, making the conventional path-planning algorithm used by mining inspection robots frequently inadequate for real requirements. To safeguard the mining inspection robot, targeting the problem of low search efficiency and path redundancy in the path planning of the existing rapidly exploring random tree (RRT) algorithm in the narrow and complex unstructured environment, a path-planning algorithm combining improved RRT and a probabilistic road map (PRM) is proposed. Initially, the target area is efficiently searched according to the fan-shaped goal orientation strategy and the adaptive step size expansion strategy. Subsequently, the PRM algorithm and the improved RRT algorithm are combined to reduce the redundant points of the planning path. Ultimately, considering the kinematics of the vehicle, the path is optimized by the third-order Bessel curve. The experimental simulation results show that the proposed path-planning algorithm has a higher success rate, smoother path, and shorter path length than other algorithms in complex underground mining environments, which proves the effectiveness of the proposed algorithm.

Recent advances in path-planning algorithms have transformed robotics. The Rapidly exploring Random Tree (RRT) algorithm underpins autonomous robot navigation. This paper systematically examines the uses and development of RRT algorithms in single and multiple robots to demonstrate their importance in modern robotics studies. To do this, we have reviewed 70 works on RRT algorithms in single and multiple robot path planning from 2015 to 2023. RRT algorithm evolution, including crucial turning points and innovative techniques, have been examined. A detailed comparison of the RRT Algorithm versions reveals their merits, limitations, and development potential. The review’s identification of developing regions and future research initiatives will enable roboticists to use RRT algorithms. This thorough review is essential to the robotics community, inspiring new ideas, helping problem-solving, and expediting single- and multi-robot system development. This highlights the necessity of RRT algorithms for autonomous and collaborative robotics advancement.

This paper proposes a hybrid Unmanned Aerial Vehicle (UAV) path planning method that combines the Rapidly-exploring Random Tree (RRT) algorithm with Proximal Policy Optimization (PPO). The proposed method aims to enhance the efficiency and adaptability of UAV path planning in complex and dynamic environments. The RRT algorithm excels at quickly generating a feasible path from a start point to a goal point. However, the quality of its paths is often suboptimal, and it lacks adaptability in dynamic settings. In contrast, PPO, a deep reinforcement learning algorithm, optimizes paths through iterative policy updates, enabling the UAV to adapt to environmental changes. Our approach first employs RRT to generate an initial path, which is subsequently refined by PPO to improve smoothness and adaptability. Experimental results demonstrate that the RRT-PPO hybrid method performs favorably in terms of path length, computational time, and obstacle avoidance capability, effectively improving the task completion efficiency of UAVs in complex environments.

Aiming at the problems of strong randomness, unsmooth path and local optimum in the path planning of the Rapidly-exploring Random Trees (RRT) algorithm. The paper designs an improved RRT algorithm with variable step size and goal orientation (VO-RRT), which introduces variable step size, oriented expansion node, optimized initial path and smoothed path four parts. Through several experiments in 2D and 3D space to prove that the VO-RRT algorithm has enhanced obstacle avoidance ability and improved path smoothness in different obstacle spaces. The path nodes generated by the VO-RRT algorithm in 3D space are tested in URsim simulation software and manipulator body to verify the executability of the optimized path.

We present a refined Rapidly-exploring Random Tree (RRT) algorithm for assembly path planning in complex environments. This algorithm adapts its expansion automatically to explore complex environments with narrow passages and cluttered obstacles more efficiently. In this algorithm, the nodes in the tree are classified by various criterions and different extending values are assigned on them indicating the nearby environment and are used to control the future expansion. A series of tree extending schemes are designed and selectively used based on the attributes of the node and the extending result in each step. We show that the algorithm becomes greedy in constrained environments and promising nodes have higher priority to extend than the non-promising ones. The algorithm is evaluated and applied in assembly path planning. The results show significant performance improvement over the standard RRT planner.

In dynamic environments with continuous variability, such as those affected by typhoons, ship path planning must account for both navigational safety and the maneuvering characteristics of the vessel. However, current methods often struggle to accurately capture the continuous evolution of dynamic obstacles and generally lack adaptive exploration mechanisms. Consequently, the planned routes tend to be suboptimal or incompatible with the ship’s maneuvering constraints. To address this challenge, this study proposes a Space–Time Integrated Q-Learning (STIQ-Learning) algorithm for dynamic path planning under typhoon conditions. The algorithm is built upon the following key innovations: (1) Spatio-Temporal Environment Modeling: The hazardous area affected by the typhoon is decomposed into temporally and spatially dynamic obstacles. A grid-based spatio-temporal environment model is constructed by integrating forecast data on typhoon wind radii and wave heights. This enables a precise representation of the typhoon’s dynamic evolution process and the surrounding maritime risk environment. (2) Optimization of State Space and Reward Mechanism: A time dimension is incorporated to expand the state space, while a composite reward function is designed by combining three sub-reward terms: target proximity, trajectory smoothness, and heading correction. These components jointly guide the learning agent to generate navigation paths that are both safe and consistent with the maneuverability characteristics of the vessel. (3) Priority-Based Adaptive Exploration Strategy: A prioritized action selection mechanism is introduced based on collision feedback, and the exploration factor ϵ is dynamically adjusted throughout the learning process. This strategy enhances the efficiency of early exploration and effectively balances the trade-off between exploration and exploitation. Simulation experiments were conducted using real-world scenarios derived from Typhoons Pulasan and Gamei in 2024. The results demonstrate that in open-sea environments, the proposed STIQ-Learning algorithm achieves reductions in path length of 14.4% and 22.3% compared to the D* and Rapidly exploring Random Trees (RRT) algorithms, respectively. In more complex maritime environments featuring geographic constraints such as islands, STIQ-Learning reductions of 2.1%, 20.7%, and 10.6% relative to the DFQL, D*, and RRT algorithms, respectively. Furthermore, the proposed method consistently avoids the hazardous wind zones associated with typhoons throughout the entire planning process, while maintaining wave heights along the generated routes within the vessel’s safety limits.

Path planning is an important problem in the field of unmanned aerial vehicles (UAVs). However, it is inefficient for many rapidly-exploring random tree (RRT) based methods to rapidly find a feasible solution in a complex environment. To solve the path planning problem for the UVA in a complex environment, an improved dynamic step size RRT algorithm combined with a new path length control strategy is proposed. Firstly, the algorithm adopts a biased-goal sampling strategy to guide the growth of the tree, and an expansion direction constraint strategy is adopted to limit the expansion direction of the tree. Secondly, an improved dynamic step size strategy is proposed to speed up the path searching process. Thirdly, a path length constraint strategy is designed, which is used to constrain the path length during the searching process for a solution. Finally, simulation results demonstrate that the proposed method achieves improvement in both computational time and the path quality.

A path planning algorithm is proposed for the problems of high node randomness and repeatability using the Rapidly-exploring Random Tree (RRT) algorithm in the path planning. Firstly, the method of region division centered on newly generated nodes is proposed to reduce randomness, the generation rules of temporary target nodes are guided to reduce repetitiveness, then improve the efficiency of path planning through adaptive step size strategy, smooth the planned path to improve the length of the path in the end. Simulation results show that the improved RRT algorithm can effectively plan the path for mobile robots.

In this paper, an improved APF-GFARRT* (artificial potential field-guided fuzzy adaptive rapidly exploring random trees) algorithm based on APF (artificial potential field) guided sampling and fuzzy adaptive expansion is proposed to solve the problems of weak orientation and low search success rate when randomly expanding nodes using the RRT (rapidly exploring random trees) algorithm for disinfecting robots in the dense environment of disinfection operation. Considering the inherent randomness of tree growth in the RRT* algorithm, a combination of APF with RRT* is introduced to enhance the purposefulness of the sampling process. In addition, in the context of RRT* facing dense and restricted environments such as narrow passages, adaptive step-size adjustment is implemented using fuzzy control. It accelerates the algorithm’s convergence and improves search efficiency in a specific area. The proposed algorithm is validated and analyzed in a specialized environment designed in MATLAB, and comparisons are made with existing path planning algorithms, including RRT, RRT*, and APF-RRT*. Experimental results show the excellent exploration speed of the improved algorithm, reducing the average initial path search time by about 46.52% compared to the other three algorithms. In addition, the improved algorithm exhibits faster convergence, significantly reducing the average iteration count and the average final path cost by about 10.01%. The algorithm’s enhanced adaptability in unique environments is particularly noteworthy, increasing the chances of successfully finding paths and generating more rational and smoother paths than other algorithms. Experimental results validate the proposed algorithm as a practical and feasible solution for similar problems.