Pedestrian Trajectory Prediction in Heterogeneous Traffic using Facial Keypoints-based Convolutional Encoder-decoder Network

Non-probability sampling network based on anomaly pedestrian trajectory discrimination for pedestrian trajectory prediction

Pedestrian trajectory prediction can provide decision support for self-driving cars and robots to avoid potential collision risks. Modelling of social relationships and multimodal prediction are core challenges in pedestrian trajectory prediction. However, there are two problems with existing methods: (1) these methods usually focus on modelling pairwise or group interactions, ignoring the importance of high-order interactions; and (2) existing methods struggle to balance the performance between deterministic and multimodal predictions. To address these issues, we propose a higher-order graph attention network for pedestrian trajectory prediction. Specifically, we first construct spatial and temporal graphs to model social interactions and temporal dependencies. To achieve high-order interaction modelling, we design a higher-order graph attention module to capture pedestrian social and temporal interactions of different orders by stacking multiple layers of graph attention. Subsequently, we design a deformable spatial-temporal sparse module to adaptively eliminate social and temporal redundant interactions. To balance deterministic and multimodal prediction performance, we design a two-stage prediction strategy. The first stage predicts pedestrian deterministic trajectories, and the second stage refines pedestrian deterministic trajectories to complete both deterministic and multimodal predictions. Quantitative analysis on the ETH, UCY, and SDD datasets demonstrates that our method outperforms existing methods in both deterministic and multimodal predictions. Qualitative analysis shows that our method can effectively describe complex social relationships and accomplish reliable trajectory prediction.

Pedestrian trajectory prediction is a critical research area with numerous domains, e.g., blind navigation, autonomous driving systems, and service robots. There exist two challenges in this research field: spatio-temporal interaction modeling among pedestrians and the uncertainty of pedestrian trajectories. To tackle these challenges, we propose a spatio-temporal interaction aware and trajectory distribution aware graph convolution network. First, we propose a spatio-temporal interaction aware module that integrates a graph convolutional network and self-attention mechanism to model spatio-temporal interactions among pedestrians. Second, we design a trajectory distribution aware module to learn latent trajectory distribution information from the measured trajectories at observed and future times. This can provide knowledge-rich trajectory distribution information for the multimodality of the predicted trajectories. Finally, to address the problem of the propagation and accumulation of prediction errors, we design a trajectory decoder to generate the multimodal future trajectories. The proposed model is evaluated utilizing videos recorded by a camera sensor in crowded areas and can be applied to predict multiple pedestrians’ future trajectories from in-vehicle cameras. Experimental results demonstrate that the proposed approach can achieve superior results on the average displacement error (ADE) and final displacement error (FDE) metrics to state-of-the-art approaches and can predict socially acceptable future trajectories.

Pedestrian trajectory prediction is an important research area with significant applications in autonomous driving and intelligent surveillance. However, existing studies on pedestrian trajectory prediction often suffer from a noticeable discrepancy between predicted and actual trajectories, due to incomplete extraction of pedestrian trajectory features and the randomness of the pedestrian walking process. The key objective of this article is to address this issue by proposing a method that can reasonably simulate the randomness of pedestrian walking and comprehensively extract pedestrian trajectory features. To achieve this, a novel social informer model built upon the informer model is proposed in this article. The social informer utilizes a transformer encoder-based interaction module to comprehensively extract pedestrian trajectory features, which are input into the informer model for further processing. Additionally, an adaptive variance mechanism is proposed to determine the optimal variance and accurately simulate the random nature of pedestrian walking. Finally, the proposed model is evaluated in a comparative experiment on ETH and UCY datasets, with results demonstrating that the proposed model outperforms other models, exhibiting improved accuracy and performance.

Predicting the future trajectories of pedestrians is a challenging problem that has a range of application, from crowd surveillance to autonomous driving. In literature, methods to approach pedestrian trajectory prediction have evolved, transitioning from physics-based models to data-driven models based on recurrent neural networks. In this work, we propose a new approach to pedestrian trajectory prediction, with the introduction of a novel 2D convolutional model. This new model outperforms recurrent models, and it achieves state-of-the-art results on the ETH and TrajNet datasets. We also present an effective system to represent pedestrian positions and powerful data augmentation techniques, such as the addition of Gaussian noise and the use of random rotations, which can be applied to any model. As an additional exploratory analysis, we present experimental results on the inclusion of occupancy methods to model social information, which empirically show that these methods are ineffective in capturing social interaction.

Understanding crowd motion dynamics and forecasting the future pedestrian trajectories are critical to various applications, e.g. autonomous driving and surveillance system. This task is challenging because when pedestrians plan the future paths in real crowd scenes, they will distinguish the priorities of following their predetermined destinations and responding to the motion behaviors of neighboring pedestrians. However, most of the existing methods ignore the problem of intention-interaction trade-off. In this paper, we tackle this problem by a hierarchical network, which achieves dynamically reasoning predetermined destinations and future trajectories. A novel graph structure called Intention-Interaction Graph (IIG) is designed to jointly model the self intentions and social interactions. To aggregate information in IIG, Interaction Gated Graph Attention Networks (IGGAN) consisting of a gate mechanism and an attention mechanism is proposed, thus achieving reasoning the influence degree of neighboring pedestrians and destinations. Experimental results on multiple widely used pedestrian trajectory prediction datasets, including two datasets in ETH and three datasets in UCY, demonstrate the effectiveness of the proposed model.

Pedestrian trajectory prediction is fundamental to a wide range of scientific research work and industrial applications. Most of the current advanced trajectory prediction methods incorporate context information such as pedestrian neighbourhood, labelled static obstacles, and the background scene into the trajectory prediction process. In contrast to these methods which require rich contexts, the method in our paper focuses on predicting a pedestrian's future trajectory using his/her observed part of the trajectory only. Our method, which we refer to as LVTA, is a Location-Velocity-Temporal Attention LSTM model where two temporal attention mechanisms are applied to the hidden state vectors from the location and velocity LSTM layers. In addition, a location-velocity attention layer embedded inside a tweak module is used to improve the predicted location and velocity coordinates before they are passed to the next time step. Extensive experiments conducted on three large benchmark datasets and comparison with eleven existing trajectory prediction methods demonstrate that LVTA achieves competitive prediction performance. Specifically, LVTA attains 9.19 pixels Average Displacement Error (ADE) and 17.28 pixels Final Displacement Error (FDE) for the Central Station dataset, and 0.46 metres ADE and 0.92 metres FDE for the ETH&UCY datasets. Furthermore, evaluation on using LVTA to generate trajectories of different prediction lengths and on new scenes without the need of retraining confirms that it has good generalizability.

Multi-information-based convolutional neural network with attention mechanism for pedestrian trajectory prediction

This paper presents a novel framework for accurate pedestrian trajectory prediction in intersection corners or near crosswalks. Given prior knowledge of curbside geometry (i.e. angle made by intersecting curbs at the corner point of interest and the coordinates of the corner itself), the presented framework can accurately predict pedestrian trajectories even in new, unseen intersections. This is achieved by learning motion primitives in a common frame, called the curbside coordinate frame. A key insight in developing this common frame is to ensure that trajectories from intersections with different geometries, representing the same behavior, are spatially similar in the common frame. Motion primitives learned in such a common frame, can then be easily generalized to predict in new intersections, with different geometries than the ones trained on. We test our algorithm on real pedestrian trajectory datasets collected at two intersections, with distinctly different curbside and crosswalk geometries. A comparison of our algorithm with [1] demonstrates improved prediction accuracies of pedestrian trajectory prediction in the case of same training and test intersections, and the improvement of accuracy in the most different training and test intersections scenarios. The result also shows additional context, such as information about pedestrian traffic lights, if available, can be easily incorporated in our prediction model for further improvement in prediction accuracy.

This work remedies the drawbacks of existing methods in pedestrian trajectory prediction for video surveillance. A traditional two-stage approach, which first detects and tracks pedestrians before forecasting their subsequent trajectories, relies solely on historical trajectories to predict future movements, overlooking the rich contextual information within videos. Although some one-stage methods have been introduced to streamline this process, they still struggle with complex model architectures due to their reliance on pixel-wise flow estimation. To resolve these issues, we propose a simple yet effective Transformer-based one-stage model, called PredDETR, that directly anticipates the future trajectories of multiple pedestrians from videos. Following the end-to-end paradigm of DETR, our PredDETR model not only associates the bounding boxes of each pedestrian across subsequent frames but also predicts their future trajectories using an additional predictive decoder. Taking past raw video frames as input, the proposed PredDETR directly forecasts the future locations of each pedestrian in a non-autoregressive manner. The empirical results validate that, despite its simpler design, PredDETR is a compelling method compared to a previous one-stage approach.

Pedestrian trajectory prediction via physical-guided position association learning

Pedestrian trajectory prediction in urban environments has emerged as a critical research area with extensive applications across various domains. Accurate prediction of pedestrian trajectories is essential for the safe navigation of autonomous vehicles and robots in pedestrian-populated environments. Effective prediction models must capture both the spatial interactions among pedestrians and the temporal dependencies governing their movements. Existing research primarily focuses on forecasting a single trajectory per pedestrian, limiting its applicability in real-world scenarios characterised by diverse and unpredictable pedestrian behaviours. To address these challenges, this paper introduces the Graph Convolutional Network, Spatial–Temporal Attention, and Generative Model (GSTGM) for pedestrian trajectory prediction. GSTGM employs a spatiotemporal graph convolutional network to effectively capture complex interactions between pedestrians and their environment. Additionally, it integrates a spatial–temporal attention mechanism to prioritise relevant information during the prediction process. By incorporating a time-dependent prior within the latent space and utilising a computationally efficient generative model, GSTGM facilitates the generation of diverse and realistic future trajectories. The effectiveness of GSTGM is validated through experiments on real-world scenario datasets. Compared to the state-of-the-art models on benchmark datasets such as ETH/UCY, GSTGM demonstrates superior performance in accurately predicting multiple potential trajectories for individual pedestrians. This superiority is measured using metrics such as Final Displacement Error (FDE) and Average Displacement Error (ADE). Moreover, GSTGM achieves these results with significantly faster processing speeds.

Pedestrian trajectory prediction is one of the important tasks required for autonomous navigation and social robots in human environments. Previous studies focused on estimating social forces among individual pedestrians. However, they did not consider the social forces of groups on pedestrians, which results in over-collision avoidance problems. To address this problem, we present a Disentangled Multi-Relational Graph Convolutional Network (DMRGCN) for socially entangled pedestrian trajectory prediction. We first introduce a novel disentangled multi-scale aggregation to better represent social interactions, among pedestrians on a weighted graph. For the aggregation, we construct the multi-relational weighted graphs based on distances and relative displacements among pedestrians. In the prediction step, we propose a global temporal aggregation to alleviate accumulated errors for pedestrians changing their directions. Finally, we apply DropEdge into our DMRGCN to avoid the over-fitting issue on relatively small pedestrian trajectory datasets. Through the effective incorporation of the three parts within an end-to-end framework, DMRGCN achieves state-of-the-art performances on a variety of challenging trajectory prediction benchmarks.

Autonomous vehicles are expected to predict the near future trajectories of the pedestrian who might wait or continue crossing the road at the un-signalized intersection. This study presents a new framework for pedestrian trajectory predictions, which integrates Dynamic Bayesian Networks (DBN) and sequence to sequence (Seq2Seq) learning through an adaptive weighting strategy. DBN anticipates the pedestrian’s future trajectories using a probabilistic graphical model that combines environmental clues and kinematic information. Seq2Seq predicts the future trajectories with a well-trained learning model based on the observed trajectories up to the current instant. The adaptive weighting strategy can allocate weights online for DBN and Seq2Seq using the stopping probability and prediction errors. A real-world pedestrian dataset is employed for evaluations and results show that the proposed model outperforms DBN and Seq2Seq. The mean errors and final destination errors of the proposed model when predicting one second ahead are 0.04m, 0.10m in crossing scenarios, and 0.06m, 0.17m in stopping scenarios. This study expects to provide active pedestrian protections for autonomous vehicles on urban roads.

Pedestrian trajectory prediction is an important task in practical applications such as automatic driving and surveillance systems. It is challenging to effectively model social interactions among pedestrians and capture temporal dependencies. Previous methods typically emphasized social interactions among pedestrians but ignored the temporal consistency of predictions and suffered from superfluous interactions by dense undirected graphs, resulting in a considerable deviance from reality. In addition, autoregressive approaches predicted future locations conditioning on previous predictions one by one, which would lead to error accumulation and time consuming. To address these issues, we present Non-autoregressive Sparse Transformer (NaST) networks for pedestrian trajectory prediction. Specifically, NaST models sparse spatial interactions and sparse temporal dependency via a sparse spatial transformer and a sparse temporal transformer separately. Different from previous predictions such as RNN-based approaches, the transformer decoder works in non-autoregressive pattern and predicts all the future locations at one time from a query sequence, which could avoid the error accumulation and be less computationally intensive. We evaluate our proposed method on the ETH and UCY datasets, and the experimental results show our method outperforms comparative state-of-the-art methods.