Per-thread cycle accounting in SMT processors

This paper presents the first analysis of operating system execution on a simultaneous multithreaded (SMT) processor. While SMT has been studied extensively over the past 6 years, previous research has focused entirely on user-mode execution. However, many of the applications most amenable to multithreading technologies spend a significant fraction of their time in kernel code. A full understanding of the behavior of such workloads therefore requires execution and measurement of the operating system, as well as the application itself.To carry out this study, we (1) modified the Digital Unix 4.0d operating system to run on an SMT CPU, and (2) integrated our SMT Alpha instruction set simulator into the SimOS simulator to provide an execution environment. For an OS-intensive workload, we ran the multithreaded Apache Web server on an 8-context SMT. We compared Apache's user- and kernel-mode behavior to a standard multiprogrammed SPECInt workload, and compared the SMT processor to an out-of-order superscalar running both workloads. Overall, our results demonstrate the microarchitectural impact of an OS-intensive workload on an SMT processor and provide insight into the OS demands of the Apache Web server. The synergy between the SMT processor and Web and OS software produced a greater throughput gain over superscalar execution than seen on any previously examined workloads, including commercial databases and explicitly parallel programs.

Currently,fetch policies in Simultaneous Multithreading(SMT)processors almost focus on overall performance optimization,and provide no control over how individual threads are executed.A novel fetch policy called CPIT(Controlling Performance of Individual Thread)is proposed to control the execution of a particular thread in SMT processors.Results show that for more than 94% of all cases measured,CPIT can control the execution and consequently achieve the desired performance for a given thread.For the failing cases,the average variance is within 1.25%.Furthermore,CPIT does not sacrifice overall performance of SMT processors severely.Compared to fetch policies orienting towards performance maximization such as ICOUNT,the average degradation of overall performance is not more than 3% and the degradation of threads other than the given thread in performance is only 1.75%.

Symbiotic job scheduling improves simultaneous multithreading (SMT) processor performance by coscheduling jobs that have “compatible” demands on the processor's shared resources. Existing approaches however require a sampling phase, evaluate a limited number of possible coschedules, use heuristics to gauge symbiosis, are rigid in their optimization target, and do not preserve system-level priorities/shares. This article proposes probabilistic job symbiosis modeling, which predicts whether jobs will create positive or negative symbiosis when coscheduled without requiring the coschedule to be evaluated. The model, which uses per-thread cycle stacks computed through a previously proposed cycle accounting architecture, is simple enough to be used in system software. Probabilistic job symbiosis modeling provides six key innovations over prior work in symbiotic job scheduling: (i) it does not require a sampling phase, (ii) it readjusts the job coschedule continuously, (iii) it evaluates a large number of possible coschedules at very low overhead, (iv) it is not driven by heuristics, (v) it can optimize a performance target of interest (e.g., system throughput or job turnaround time), and (vi) it preserves system-level priorities/shares. These innovations make symbiotic job scheduling both practical and effective. Our experimental evaluation, which assumes a realistic scenario in which jobs come and go, reports an average 16% (and up to 35%) reduction in job turnaround time compared to the previously proposed SOS (sample, optimize, symbios) approach for a two-thread SMT processor, and an average 19% (and up to 45%) reduction in job turnaround time for a four-thread SMT processor.

Simultaneous Multithreading (SMT) processors achieve high processor throughput at the expense of single-thread performance. This paper investigates resource allocation policies for SMT processors that preserve, as much as possible, the single-thread performance of designated threads, while still permitting other threads to share resources. Since background threads on such an SMT machine have a near-zero performance impact on foreground threads, we refer to the background threads as transparent threads. Transparent threads are ideal for performing low-priority or non-critical computations, with applications in process scheduling, subordinate multithreading, and on-line performance monitoring.To realize transparent threads, we propose three mechanisms for maintaining the transparency of background threads: slot prioritization, background thread instruction-window partitioning, and background thread flushing. In addition, we propose three mechanisms to boost background thread performance without sacrificing transparency: aggressive fetch partitioning, foreground thread instruction-window partitioning, and foreground threadflushing. We implement our mechanisms on a detailed simulator of an SMT processor, and evaluate them using 8 benchmarks, including 7 from the SPEC CPU2000 suite. Our results show when cache and branch predictor interference are factored out, background threads introduce less than 1% performance degradation on the foreground thread. Furthermore, maintaining the transparency of background threads reduces their throughput by only 23% relative to an equal priority scheme.To demonstrate the usefulness of transparent threads, we study Transparent Software Prefetching (TSP), an implementation of software data prefetching using transparent threads. Due to its near-zero overhead, TSP enables prefetch instrumentation for all loads in a program, eliminating the need for profiling. TSP, without any profile information, achieves a 9.52% gain across 6 SPEC benchmarks, whereas conventional software prefetching guided by cache-miss profiles increases performance by only 2.47%.

Efficient resource sharing algorithm for physical register file in simultaneous multi-threading processors

Today's general-purpose processors are increasingly using multithreading in order to better leverage the additional on-chip real estate available with each technology generation. Simultaneous multi-threading (SMT) was originally proposed as a large dynamic superscalar processor with monolithic hardware structures shared among all threads. Inters hyper-threaded Pentium 4 processor partitions the queue structures among two threads, demonstrating more balanced performance by reducing the hoarding of structures by a single thread. IBM's Power5 processor is a 2-way chip multiprocessor (CMP) of SMT processors, each supporting 2 threads, which significantly reduces design complexity and can improve power efficiency. This paper examines processor partitioning options for larger numbers of threads on a chip. While growing transistor budgets permit four and eight-thread processors to be designed, design complexity, power dissipation, and wire scaling limitations create significant barriers to their actual realization. We explore the design choices of sharing, or of partitioning and distributing, the front end (instruction cache, instruction fetch, and dispatch), the execution units and associated state, as well as the L1 Dcache banks, in a clustered multi-threaded (CMT) processor. We show that the best performance is obtained by restricting the sharing of the L1 Dcache banks and the execution engines among threads. On the other hand, significant sharing of the front-end resources is the best approach. When compared against large monolithic SMT processors, a CMT processor provides very competitive IPC performance on average, 90-96% of that of partitioned SMT while being more scalable and much more power efficient. In a CMP organization, the gap between SMT and CMT processors shrinks further, making a CMP of CMT processors a highly viable alternative for the future

DLL-conscious instruction fetch optimization for SMT processors

Speculative multithreading is a technique that has been used to improve single thread performance. Speculative multithreading architectures for Chip multiprocessors (CMPs) have been extensively studied. But there have been relatively few studies on the design of speculative multithreading for simultaneous multithreading (SMT) processors. The current SMT based designs – IMT [9] and DMT [2] use load/store queue (LSQ) to perform dependence checking. Since the size of the LSQ is limited, this design is suitable only for small threads. In this paper we present a novel cache-based architecture support for speculative simultaneous multithreading which can efficiently handle larger threads. In our architecture, the associativity in the cache is used to buffer speculative values. Our 4-thread architecture can achieve about 15% speedup when compared to the equivalent superscalar processors and about 3% speedup on the average over the LSQ-based architectures, however, with a less complex hardware. Also our scheme can perform 14% better than the LSQ-based scheme for larger threads.

Summary form only given. Speculative executions help modern processors to expose independent instructions on the fly and accordingly exploit more instruction-level parallelism. However, when incorrect speculations occur, useless work is performed for those incorrectly speculated instructions. This lowers a sustained performance and leads to a significant waste of power. Unlike superscalar processors, simultaneous multithreading (SMT) processors can concurrently execute multiple threads. Thus, they have a chance to control speculative executions by deliberately choosing threads from which instructions will be fetched at each cycle, considering the dynamic characteristics of running threads. We present an efficient front-end mechanism, called SAFE-T (speculation-aware front-end throttling), for scheduling threads in SMT processors. It involves thread prioritizing and throttling; priority given to a thread can be overridden when that thread seems to suffer from an excessive amount of incorrect speculations, therefore preventing instructions from being fetched. Simulation results show that our policy provides an average reduction of 41.6% in the number of wrong-path instructions and improves the instruction throughput by up to 14.5%. A cost-effective implementation for the proposed policy is shown as well.

This paper presents Threaded Multi-Path Execution (TME), which exploits existing hardware on a Simultaneous Multi-threading (SMT) processor to speculatively execute multiple paths of execution. When there are fewer threads in an SMT processor than hardware contexts, threaded multi-path execution uses spare contexts to fetch and execute code along the less likely path of hard-to-predict branches.This paper describes the hardware mechanisms needed to enable an SMT processor to efficiently spawn speculative threads for threaded multi-path execution. The Mapping Synchronization Bus is described, which enables the spawning of these multiple paths. Policies are examined for deciding which branches to fork, and for managing competition between primary and alternate path threads for critical resources. Our results show that TME increases the single program performance of an SMT with eight thread contexts by 14%-23% on average, depending on the misprediction penalty for programs with a high misprediction rate.

An integrated autonomous control mechanism to optimize sharing of multiple resources in Simultaneous Multi-Threading processors

Multithreaded processors increase throughput by executing multiple independent programs on a single pipeline. Simultaneous Multithreaded (SMT) processors execute multiple threads simultaneously thus add a significant dimension to the design complexity. Dealing with this complexity calls for extended and innovative design verification efforts. This paper develops an analytic model based SMT random test generation technique. SMT analytic model parameters are applied to create random tests with high utilization and increased contention. To demonstrate the methodology, parameters extracted from the PPC ISA and sample processor configurations are simulated on the SMT analytic model. The methodology focuses on exploiting data/control and structural hazards to guide the random test generator to create effective SMT tests.

Multithreaded processors increase throughput by executing multiple independent programs on a single pipeline. Simultaneous Multithreaded (SMT) processors execute multiple threads simultaneously thus add a significant dimension to the design complexity. Dealing with this complexity calls for extended and innovative design verification efforts. This paper develops an analytic model based SMT random test generation technique. SMT analytic model parameters are applied to create random tests with high utilization and increased contention. To demonstrate the methodology, parameters extracted from the PPC ISA and sample processor configurations are simulated on the SMT analytic model. The methodology focuses on exploiting data/control and structural hazards to guide the random test generator to create effective SMT tests.

Simultaneous multithreading (SMT) attempts to keep a dynamically scheduled processorpsilas resources busy with work from multiple independent threads. Threads with long-latency stalls, however, can lead to a reduction in overall throughput because they occupy many of the critical processor resources. In this work, we first study the interaction between stalls caused by ambiguous memory dependences and SMT processing. We then propose the technique of proactive exclusion (PE) where the SMT fetch unit stops fetching from a thread when a memory dependence is predicted to exist. However, after the dependence has been resolved, the thread is delayed waiting for new instructions to be fetched and delivered down the front-end pipeline. So we introduce an early parole (EP) mechanism that exploits the predictability of dependence-resolution delays to restart fetch of an excluded thread so that the instructions reach the execution core just as the original dependence resolves. We show that combining these two techniques (PEEP) yields a 16.9% throughput improvement on a 4-way SMT processor that supports speculative memory disambiguation. These strong results indicate that a fetch policy that is cognizant of future stalls considerably improves the throughput of an SMT machine.

In Simultaneous Multithreaded (SMT) architectures most hardware resources are shared between threads. This provides a good cost/performance trade-off which renders these architectures suitable for use in embedded systems. However, since threads share many resources, they also interfere with each other. As a result, execution times of applications become highly unpredictable and dependent on the context in which an application is executed. Obviously, this poses problems if an SMT is to be used in a real-time system.In this paper, we propose two novel hardware mechanisms that can be used to reduce this performance variability. In contrast to previous approaches, our proposed mechanisms do not need any information beyond the information already known by traditional job schedulers. Nor do they require extensive profiling of workloads to determine optimal schedules. Our mechanisms are based on dynamic resource partitioning. The OS level job scheduler needs to be slightly adapted in order to provide the hardware resource allocator some information on how this resource partitioning needs to be done. We show that our mechanisms provide high stability for SMT architectures to be used in real-time systems: the real time benchmarks we used meet their deadlines in more than 98% of the cases considered while the other thread in the workload still achieves high throughput.