Performance Analysis and Optimization of Delayed Offloading System With Opportunistic Fog Node

A network-independent tool-based usable authentication system for Internet of Things devices

Internet of Things (IoT) devices upload their data into the cloud for storage because of their limited resources. However, cloud storage data has been subject to potential integrity threats, and consequently auditing techniques are demanded to ensure the integrity of stored data. Unfortunately, existing auditing approaches require owners to undertake expensive tag calculations, which is unsuitable for resource-constrained IoT devices. To resolve the issue, we present a <underline xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">F</u> air <underline xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">C</u> loud <underline xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">A</u> uditing proposal by employing the <underline xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">B</u> lockchain (FCAB). We combine certificateless signatures with the designed dynamic structure to constructively offload the cost of tag computation from the IoT device to the introduced fog node, significantly reducing the local burden. Considering that fog nodes may behave dishonestly during auditing, FCAB enables the IoT device to verify the audit result's authenticity by extracting reliable checking records from the blockchain, thereby achieving auditing fairness, which ensures that the <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">honest</i> cloud and fog node will gain the corresponding reward. Finally, FCAB is proved to satisfy tag unforgeability, proof unforgeability, privacy preserving, and auditing fairness. Experiment evaluations affirm that FCAB is computationally and communicationally efficient and retains a smaller and fixed computation locally at the data processing stage (mainly including tag computation) than existing auditing methods.

The Internet of Things (IoT) devices is able to communicate with another IoT devices in heterogeneous environments. They are also able to create a network by their own using wireless capabilities without a centralized approach. This network is called wireless mobile ad hoc network (MANET). The MANET facilitate IoT devices to communicate with each other in an infrastructure less network of the Internet of Things environment. The IoT devices can dynamically join, create connection and exchange information among them. The role of cloud in this framework is to store and process the data by IoT devices. The communication Security has been raised as one of the most critical issues of cloud computing where resolving such an issue would result in a constant growth in the use and popularity of cloud. Our purpose of this study is to create a framework for providing the communication in an integrated framework of Cloud and MANET among IoT devices. Our main contribution links a new study that integrates cloud computing to the MANET and provides communication to the internet of things. This study can be used in the framework of the Internet of Things in future.

The requirements of low latency, low cost, less energy consumption, high flexibility, high network capacity, and high data safety are crucial challenges for future Internet of Things (IoT) wireless networks. Motivated by these challenges, this study deals with a novel design of green-cooperative IoT network, which employed coupled relays consisting of one IoT relay selected for forwarding signals to multiple IoT devices while another IoT relay transmitted jamming signals to an eavesdropper. For flexibility, all IoT nodes were powered by solar energy enough to sustain themselves, in order to consume less energy. To reach low latency, the study adopted the emerging non-orthogonal multiple access technique to serve multiple IoT devices simultaneously. Furthermore, the study adopted the simultaneous wireless information and power transfer technique which transmits wireless data for information processing and energy for energy harvesting. The study sketched a novel transmission block time period framework which plotted how a signal could travel via an individual IoT model. Maximizing the achievable bit-rate of IoT devices was considered to improve network capacity and data safety as well. Aiming at enhancing secrecy performance, a rest IoT relay played a role as a friendly jammer to transmit a jamming signal to an eavesdropper using energy harvested from the power splitting protocol. The results achieved in this study showed that the proposed model satisfied the requirements of future green IoT wireless networks. Derivatives leading to closed-form expressions are presented and verified by simulation results. The investigated results demonstrated that a friendly jammer based on radio frequency and energy harvesting strongly forces the intercept probability performance of the eavesdropper towards one, while outage probability performance of IoT devices towards zero showed that the signal to noise ratio tends to infinity.

In the modern security-conscious world, Deep Packet Inspection (DPI) proxies are increasingly often used on industrial and enterprise networks to perform TLS unwrapping on all outbound connections. However, enabling TLS unwrapping requires local devices to have the DPI proxy Certificate Authority certificates installed. While for conventional computing devices this is addressed via enterprise management, it's a difficult problem for Internet of Things (IoT) devices which are generally not under enterprise management, and may not even be capable of it due to their resource-constrained nature. Thus, for typical IoT devices, being installed on a network with DPI requires either manual device configuration or custom DPI proxy configuration, both of which solutions have significant shortcomings. This poses a serious challenge to the deployment of IoT devices on DPI-enabled intranets. The authors propose a solution to this problem: a method of installing on IoT devices the CA certificates for DPI proxy CAs, as well as other security configuration (security bootstrapping). The proposed solution respects the DPI policies, while allowing the commissioning of IoT and IIoT devices without the need for additional manual configuration either at device scope or at network scope. This is accomplished by performing the bootstrap operation over unsecured connection, and downloading certificates using TLS validation at application level. The resulting solution is light-weight and secure, yet does not require validation of the DPI proxy's CA certificates in order to perform the security bootstrapping, thus avoiding the chicken-and-egg problem inherent in using TLS on DPI-enabled intranets.

Seeing is not always believing: Insights on IoT manufacturing from firmware composition analysis and vendor survey

With the advancement in science and technology, the demand for electronic Internet of Things (IoT) devices has increased to store and process digital data. With the advancement in IoT technology, we are more reliant on IoT devices to perform our regular tasks. IoT Forensics deals with the investigation of IoT devices such as smartphones, tablets, smart watches, or any device which is connected to the Internet. The data on these devices can still be retrieved via IoT forensics even if they are destroyed, resold, or misplaced. Before discarding any IoT device, we must consider how to secure the data stored on them. We are then going to discuss the several types of personal data that could be retrieved from discarded IoT devices. Finally, we are going to discuss the protection measures for the safe disposal of IoT devices.

Malicious attacks are common among the Internet of Things (IoT) devices that are installed in several locations like offices, homes, healthcare facilities, and transportation. Due to massive amounts of data created by IoT devices, machine learning is frequently used to detect cyber-attacks on these devices. The fact that fog devices may not have the computing or memory capability to identify threats in a timely manner is a source of concern. According to this article, machine learning model selection and real-time prediction can both be offloaded from the cloud, and both jobs can be performed by fog nodes, which are distributed computing devices. A cloud-based ensemble machine learning model is constructed using the provided method, and subsequently, attacks on fog nodes are identified in real time using the model. The NSL-KDD dataset is used to evaluate the performance of this approach. The results indicate that the proposed technique is effective in terms of a variety of performance criteria, including execution time, precision, recall, accuracy, and the F1 measure.

In this study, we first present a framework that jointly optimizes energy harvesting and information decoding for Internet of Things (IoT) devices, which are capable of simultaneous wireless information and power reception, in a smarty city. In particular, a generalized power-splitting receiver for IoT devices is designed, where each antenna in the receiver has an independent power splitter, unlike the existing works in which only one power splitter is employed regardless of the number of antennas in the receiver. Such a receiver design can provide a great degree of freedom to improve the network performance. Based on the presented framework, for each IoT device, we formulate an optimization problem whose objective is to maximize the harvested energy of each IoT device while satisfying its data rate requirement. To solve this problem, we propose a double-deep deterministic policy gradient-based online learning algorithm which enables each IoT device to jointly determine receive beamforming and power-splitting ratio vectors in real time. Furthermore, each IoT device can implement the proposed algorithm in a distributed manner using only its local channel state information. As such, cooperation and information exchange among the base stations and IoT devices are not necessary when performing the proposed algorithm at IoT devices. The extensive simulation results show the validity of the proposed algorithm.

The development and use of Internet of Things (IoT) devices have grown significantly in recent years. Advanced IoT device characteristics are mainly to blame for the wide range of applications that may now be achieved with IoT devices. Corporations have begun to embrace the IoT concept. Identifying true and suitable devices, security faults that might be used for bad reasons, and administration of such devices are only a few of the issues that IoT, a new concept in technological progress, provides. In some ways, IoT device traffic differs from regular device traffic. Devices with particular features can be classified into categories, irrespective of their function or performance. Ever-changing and complex environments, like a smart home, demand this classification scheme. A total of 41 IoT devices were employed in this investigation. To build a multiclass classification model, IoT devices contributed 13 network traffic parameters. To further preprocess the raw data received, preprocessing techniques like Normalization and Dataset Scaling were utilized. Feature engineering techniques can extract features from the text data. A total of 117,423 feature vectors are contained in the dataset after stratification, which are used to further improve the classification model. In this study, a variety of performance indicators were employed to show the performance of the logiboosted algorithms. Logi-XGB scored 80.2% accuracy following application of the logit-boosted algorithms to the dataset for classification, whereas Logi-GBC achieved 77.8% accuracy. Meanwhile, Logi-ABC attained 80.7% accuracy. Logi-CBC, on the other hand, received the highest Accuracy score of 85.6%. The accuracy of Logi-LGBM and Logi-HGBC was the same at 81.37% each. Our suggested Logi-CBC showed the highest accuracy on the dataset when compared to existing Logit-Boosted Algorithms used in earlier studies.

With the growth of wireless network technology-based devices, identifying the communication behaviour of wireless connectivity enabled devices, e.g. Internet of Things (IoT) devices, is one of the vital aspects, in managing and securing IoT networks. Initially, devices use frames to connect to the access point on the local area network and then, use packets of typical communication protocols through the access point to communicate over the Internet. Toward this goal, network packet and IEEE 802.11 media access control (MAC) frame analysis may assist in managing IoT networks efficiently, and allow investigation of inclusive behaviour of IoT devices. This paper presents network traffic traces data of D-Link IoT devices from packet and frame levels. Data collection experiment has been conducted in the Network Systems and Signal Processing (NSSP) laboratory at Universiti Brunei Darussalam (UBD). All the required devices, such as IoT devices, workstation, smartphone, laptop, USB Ethernet adapter, and USB WiFi adapter, have been configured accordingly, to capture and store network traffic traces of the 14 IoT devices in the laboratory. These IoT devices were from the same manufacture (D-Link) with different types, such as camera, home-hub, door-window sensor, and smart-plug.

Backscatter communication is an energy-efficient communication technique for the Internet of things (IoT) devices. It enables data transmission by reflecting the incident radio signals. In this paper, we propose a communication mode selection scheme for IoT devices that can communicate using either active transmission or backscattering. In the active transmission mode, the IoT devices can transmit data over narrowband subcarriers using power-domain non-orthogonal multiple access (NOMA). In the backscattering mode, which operates over shorter distance than active transmission, nearby user equipment (UE) devices are used as relays. The UEs receive the backscattered signals from the IoT devices and forward them to the base station. We formulate a connection density maximization problem to select the communication mode used by each IoT device. We determine the IoT device pairing for active transmission mode with NOMA and UE-IoT device association for backscattering mode. The formulated problem is a binary integer programming problem. Although it can be solved optimally, the optimal algorithm incurs exponential computational complexity. Hence, we propose a low-complexity suboptimal algorithm to solve this problem. Results show that our proposed algorithm can enhance the connection density of narrowband IoT systems by up to 64% when compared with using single communication mode.

The number of Internet of Things (IoT) devices has increased recently and will increase further in the future. IoT devices are vulnerable, so vendors update and distribute firmware. At the time of firmware distribution, a huge number of IoT devices may connect to the firmware server and excessive network traffic may occur. Consequently, a method using a peer-to-peer file sharing system and a blockchain has been proposed. One study proposed an update scheme considering incentives for distributors to help with updating. However, this method requires the IoT devices, which have limited processing power, to decrypt encrypted files, and the distribution nodes to pay the transaction cost. This paper proposes a firmware distribution method that provides incentives for distributors to help with distribution to reduce the gas costs, using a smart contract and access control based on update records. The additional computations performed by IoT devices and distributors key management were reduced compared to those in previous studies by using access control instead of encryption. Further, the proposed approach was implemented and evaluated using a Raspberry Pi and laptop. The evaluation demonstrated that the gas cost per update was successfully lowered compared to the costs in previous studies.

To provide cellular communications for a large number of internet of things (IoT) devices, the mobile core system, called as evolved packet core (EPC) in the 4G system case, emerges to equip a large amount of computational resources. This is because the EPC needs to maintain state information on the communications of the IoT devices, even if they rarely send data. This paper proposes a method for reducing the state information. The proposed method assigns the same international mobile subscriber identity (IMSI) to multiple IoT devices, which upload data with the same cycle, and manages devices uploading data at different timings. This paper shows through the simulation-based verifications that the proposal can reduce the state information to less than one-hundredth.

Internet of things is one of the latest technology in today’s era, IoT devices are increasing day by day and become a part of our life. Sometimes we even didn’t know that we are using and surrounded by such technolgy. Smart devices like smart phone, tablets and any wearables are the example of IoT technology. These all are IoT devices and there are many more. As we all are in 2020 and facing the pandemic we all are become more connected with IoT devices to be safe. In this way the number of IoT devices per person will increase so much rapidly and several new innovations either of hardware or software take place. But the Internet of Things (IoT) devices are becoming more popular, the security measures are not upto the mark, and several issues will come in knowledge at different time on different devices. So we have to think about the security and privacy of user and should make it correct. We should learn from the past issues and try to fix them accordingly. To overcome the issues of IoT devices we can have to ways, one is to use ECC which will enchance the security in IoT device and another possible solution can be Blockchain. In this paper we will discuss about ECC and blockchain technology both and try to find a comparitive study.