- Research Article
- 10.1049/iet-opt.2017.0104
Guest Editorial
- Oct 01, 2017
- IET Optoelectronics
- A.C Boucouvalas + 1 more +1
Guest Editorial
Since optical links are easily blocked by obstacles in the environment, they have been considered difficult to directly perform wireless communications. However, reconfigurable intelligent surfaces (RISs), as a new type of digital coding meta-materials, can significantly improve the coverage of optical communication by establishing new links. We propose a controllable multi-branch wireless optical communication system based on optical RISs. By setting up multiple optical RISs in the environment, multiple artificial channels are built to improve the system performance and to reduce the outage probability. In this paper, we investigate three factors affecting channel coefficients, including beam jitter, RIS jitter, and obstruction probability. We derive closed-form probability density function of channel coefficients, asymptotic average bit-error rate (BER), and the outage probability for systems with multiple branches. Our analysis reveals that the probability density function contains an impulse function, which causes irreducible error rate and outage probability floors. Based on our numerical results, the BER and outage probability floor of the multi-branch system are significantly reduced compared with the single direct path system. Therefore, the optical RIS assisted multi-branch wireless communication is a promising solution against obstacles of optical channel.
Guest Editorial
Guest Editorial
RIS-assisted hybrid RF and FSO communications with index modulation-empowered link selection
Free-space optical (FSO) communication offers advantages such as high bandwidth and high transmission rates, making it suitable for 6G backhaul networks. However, FSO systems have drawbacks like sensitivity to fog, atmospheric turbulence, and pointing errors. Radio frequency (RF) links are incorporated to achieve more reliable and wider-range communication. RF links are susceptible to rain and have limited bandwidth but are not sensitive to fog or atmospheric turbulence. The complementary characteristics of RF and FSO systems make hybrid RF-FSO systems highly effective in mitigating environmental impairments. Reconfigurable intelligent surfaces (RISs) can also further extend the coverage and enhance the system bit error rate (BER) performance of RF-FSO. The state-of-the-art link selection schemes in RIS-assisted hybrid RF-FSO are normally based on channel state information (CSI). However, there is a chance that the CSI is inaccurate or even unavailable to the receiver. This paper investigates a hybrid RF-FSO communication system where CSI is unknown. In our system, the RF link is modeled using the Nakagami-m distribution, and the FSO link accounts for attenuation, Gamma-Gamma distributed turbulence, and pointing errors. The key concept of our system is the adoption of index modulation (IM) for link switching so that CSI is not needed at both transmitter and receiver, and we call it RIS-IM. Exact closed-form expressions for the signal-to-noise ratio (SNR) of the RIS-RF and RIS-FSO links are derived using multivariate Fox’s H-function without using central limit theorem, including the probability density function (PDF) and cumulative distribution function (CDF). We derive the closed-form expressions for the average BER (ABER) for RIS-IM using the SNR statistics. Furthermore, numerical analyses of RIS-IM are conducted. The numerical results of RIS-IM are given comparing with pure-IM, RIS-FSO, and hard switching as benchmarks. Mont-Carlo simulation results demonstrate the superiority of RIS-IM in terms of ABER. In the future, more analysis including outage probability (OP) and ergodic capacity (EC) await further explorations.
Read moreChannel modelling in underwater media: a wireless communication technique perspective
With a broad scope of exploration and utilization of marine resources, the field of underwater wireless communication (UWC) is attracting the growing interest of researchers. Due to the highly complex and changing underwater environment, achieving minimal Doppler Effect, extensive communication range, maintaining link reliability, and high channel efficiency is challenging. Underwater information transfer can utilize various communication techniques, including Acoustic, Optical, Radio Frequency (RF), and Magnetic Induction (MI)-based communication. Accurate channel modelling is essential for optimizing UWC’s overall performance. Each underwater communication technique has its strengths and weaknesses. This review article discusses the detailed channel modelling of Acoustic, Optical, MI, and RF communications, comparing them across parameters such as path loss, channel capacity, channel error control protocols, bit error rate (BER), the impact of reconfigurable intelligent surface (RIS), and outage probability are briefly discussed. Additionally, critical unresolved issues related to the channel modelling of UWC techniques are highlighted. This review article will assist researchers in identifying research gaps and conducting further research in the field.
Read moreOn performance of multi-RIS assisted multi-user nonorthogonal multiple access system over Nakagami-[formula omitted] fading channels
On performance of multi-RIS assisted multi-user nonorthogonal multiple access system over Nakagami-[formula omitted] fading channels
Read moreRIS-assisted D2D communication in the presence of interference: Outage performance analysis and DNN-based prediction
RIS-assisted D2D communication in the presence of interference: Outage performance analysis and DNN-based prediction
Cooperative Communications for Improving the Performance of Bidirectional Full-Duplex System With Multiple Reconfigurable Intelligent Surfaces
In this paper, we exploit the benefits of full-duplex (FD) transmission and reconfigurable intelligent surfaces (RISs) by considering a bidirectional full-duplex wireless communication system with the support of RISs. Specifically, cooperative communications are applied at two FD terminals in a RISs-assisted bidirectional full-duplex (RIS-FD) system. In this context, we successfully derive the mathematical expressions of the outage probability (OP) and the ergodic capacity (EC) of the RIS-FD system with a direct link between two terminals and multiple reflecting paths created by RISs over the Rayleigh fading channel. Numerical results show that the performance of the considered RIS-FD system depends significantly on the total number of reflecting elements in the RISs. Particularly, when the total number of reflecting elements is small, the OP and EC saturate at a high signal-to-noise ratio (SNR). However, when the total number of reflecting elements is large enough, OP decreases greatly while EC enhances significantly. In addition, the effect of residual self-interference (SI) caused by FD transmission on OP and EC is remarkable, even the residual SI level is very small. On the other hand, the influence of other system parameters such as the number of RISs (N) and the number of reflecting elements (L) are also investigated to fully consider the performance of the RIS-FD system. An important observation is that when current techniques cannot completely eliminate SI in FD transmission, the use of multiple RISs with larger L can indirectly reduce the impact of SI and significantly improve the performance of the proposed RIS-FD system. Finally, the obtained expressions are validated via Monte-Carlo simulations.
Read morePerformance Analysis of RIS-Assisted RF/FSO System for Hybrid Satellite-Terrestrial Relay Network with Decode-and-Forward Protocol
Reconfigurable intelligent surface (RIS) is an emerging signal improvement technique, which can enhance the performance of various communication technologies. Inspired by RIS technology, this paper proposes an RIS-assisted radio frequency/free space optical (RF/FSO) communication system for the hybrid satellite-terrestrial network (HSTRN). An RF source is set up on the ground to transmit electrical signals to the RIS, which further reflects the signals via an RF link to the relay satellite. The square generalized <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$K$</tex> distribution model is adopted for the RF link and the EG distribution, which is a weighted sum of the exponential and Gamma distributions, is adopted for the FSO link. The exact closed-form expressions of outage probability and average bit error rate (ABER) are derived. Furthermore, the asymptotic expressions of outage probability and ABER at high signal-to-noise ratio (SNR) are derived for engineering applications. Finally, the simulation results show that the RIS technique can significantly improve the performance of the RF/FSO communication system for HSTRN, and the performance improvement is more obvious with more reflectors.
Read morePerformance analysis of modulating retro-reflector FSO communication systems over Málaga turbulence channels
Performance analysis of modulating retro-reflector FSO communication systems over Málaga turbulence channels
Secure Backscatter Communications Through RIS: Modeling and Performance
Backscatter communication (BC) has emerged as a pivotal wireless communication paradigm owing to its low-power and cost-effective characteristics. However, BC faces various challenges from its low signal detection rate to its security vulnerabilities. Recently, reconfigurable intelligent surfaces (RIS) have surfaced as a transformative technology addressing power and communication performance issues in BC. However, the potential of RIS in addressing the security challenges of BC remains uncharted. This paper investigates the secrecy performance of RIS-aided BC, where all channels are distributed according to the Fisher-Snedecor <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$\mathcal {F}$</tex-math></inline-formula> distribution. Specifically, we consider a RIS with <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$N$</tex-math></inline-formula> reflecting elements to help a backscatter device (BD) establish a smart environment and enhance the secrecy performance in BC. Due to the nature of BC systems, our analysis considers two possible scenarios (i) in the absence of direct links and (ii) in the presence of direct links. In both cases, we first derive compact analytical expressions of the probability density function (PDF) and cumulative distribution function (CDF) for the received signal-to-noise ratio (SNR) at both a legitimate receiver and an eavesdropper. Then, to analyze the secrecy performance, we further derive analytical expressions of the average secrecy capacity (ASC) and secrecy outage probability (SOP) for both mentioned scenarios. In addition, regarding the importance of system behavior in a high SNR regime, we provide an asymptotic analysis of the SOP and ASC. Eventually, the Monte-Carlo simulation is used to validate the analytical results, revealing that utilizing RIS can greatly improve the secrecy performance of the BC system relative to traditional BC setups that do not incorporate RIS.
Read moreInfinite and Finite Block-Length FD Transmissions With Spatially-Correlated RIS Channels
The reconfigurable intelligent surface (RIS)-assisted wireless communication system is studied in this paper, where two full-duplex (FD) users simultaneously communicate with each other. The reception at each user is facilitated through a dedicated RIS. Owing to the geometry and placements of meta-atoms, the analysis incorporates spatial-correlation among the channels related to RIS. Using moment-matching approach, a new analytical framework is presented for spatially-correlated channels considering the optimal phase-shifts from RIS meta-atoms. The effects of residual self-interference (RSI), self-reflections and interference from the RIS of transmitting user are considered in the analysis. The expressions are derived for the outage probability and ergodic capacity for infinite block-length transmission, and for finite block-length transmission, the expressions are obtained for block-error rate (BLER), ergodic capacity and system goodput. To gain further insights, the expression for the asymptotic outage probability is also derived. The finding of this paper confirms the ability of RIS-assisted communication to counter the detrimental effects of self-interference in FD scenario, even in presence of spatial-correlation. The derived expressions are validated using the Monte-Carlo simulations.
Read morePerformance evaluation of re-configurable intelligent surface-assisted underwater and free-space wireless optical communication in the skip-zones
Performance evaluation of re-configurable intelligent surface-assisted underwater and free-space wireless optical communication in the skip-zones
Read morePhysical Layer Security for RIS-Aided Wireless Communications With Uncertain Eavesdropper Distributions
In this article, the physical layer security (PLS) is investigated for reconfigurable intelligent surface (RIS)-aided wireless communication systems, where one RIS is deployed to assist the communications between a pair of transmitter (Alice) and receiver (Bob), under a passive eavesdropper (Eve) attack. For the Eve, different from the bounded channel state information uncertainty model, the distribution of the Eve's location is introduced into the wiretap link. In the proposed system, considering that the Eve can overhear signals transmitted from Alice or reflected by the RIS, two scenarios are studied for RIS-aided secure communication systems: one is that the Eve distributes close to Alice without the RIS orientation, and the other is that the Eve locates close to Bob and in the presence of the RIS. After investigating the probability distribution functions of the Eve's location and the wiretap link, the novel cumulative density functions (CDFs) of the received signal-to-noise ratios (SNRs) at the Eves are, respectively, derived for the two considered scenarios, taking into account the effects of RIS reflection coefficients, pathloss, and Eve's location distribution. The closed-form expressions for the probability of the nonzero secrecy capacity and the ergodic secrecy capacity are obtained, providing insights into the impact of the Eve's location uncertainty and the RIS design on the secrecy performance. Moreover, based on the derived CDFs for received SNRs at Eves, the secrecy outage probabilities are, respectively, analyzed. Specifically, under the constraint of the secrecy outage probability, the closed forms of the minimum required SNRs at Bob and the number of RIS elements are also obtained. Simulation and analytical results corroborate the derived expressions and reveal the tradeoff between the system's energy efficiency and the number of RIS elements.
Read moreAn Improved Path-Loss Model for Reconfigurable-Intelligent-Surface-Aided Wireless Communications and Experimental Validation
Recently, a reconfigurable intelligent surface (RIS) that provides alternative wireless propagation paths (by reflecting an electromagnetic wave from a base station in desired directions) has attracted attention as a key facilitating technology for Beyond 5G and 6G wireless communications. This paper presents an improved path-loss model suitable for RIS-aided wireless communications. Unlike previously reported RIS path-loss models, the proposed model considers more practical electromagnetic phenomena (e.g., the incident and reflected gain patterns of the RIS unit cell, the effective received power at the RIS, the reflection phase error of each unit cell, and the specular reflection loss), by applying rigorous analysis. Furthermore, the accuracy of the proposed path-loss model is validated by extensive experimental measurements using our developed RIS prototype. The prototype consists of 576 phase-reconfigurable unit cells operating at 29 GHz, each of which features two PIN diodes. Each PIN diode is independently controlled to produce the desired phase distributions on the RIS. It is shown that the calculated received power in the proposed path-loss model matches the measurement results within a 1 dB margin across various practical test environments.
Read moreCollaborative Relay Radio Network Using Reconfigurable Intelligent Surface
In this paper, we have studied a model of a relay radio network system using Reconfigurable Intelligent Surface (RIS). Specifically, we used a relay network that uses RIS when there is an extra direct link from the Source (S) to the Destination (D). Next, an approximate closed-form expressions of the Outage Probability (OP) and Ergodic Capacity (EC) are considered. Based on the simulation results of OP and EC, the results show that our proposed system is more optimal than the system using supported RIS without direct link and the system without using RIS. In addition, changing the number of the RIS reflecting elements and the RIS’s location near (S) or (D) has a significant impact on the performance of the system. The analytical expression match the simulation results through the Monte Carlo simulation method. Furthermore, the simulation results of energy efficiency (EE) also show that when the target spectral efficiency (SE), Rth, is high (more than 5.45 b/s/Hz), the system using supported RIS with direct link will help reduce the transmit power and optimize the most energy compared to the other two systems.
Read morePhase fluctuation effect on the performance of space optical uplink communication system
Bit error rate (BER) performances of DPSK are researched for space uplink optical communication system. Considering further phase fluctuation effect based on the traditional atmospheric turbulence model, BER performance versus transmission power, zenith angle, frequency deviation, divergence angle and transmission diameter are discussed for different wavelengths. Simulations, especially, indicate that considering the phase fluctuation effect, BER performance is sensitive for low frequency deviation. It also confirms that wavelength of 1550nm on communication system is still a good choice for the better BER performance. This work is helpful for enhancing transmission quality and the design of space optical communication system.
Read more