Performance Analysis of Parallel Differential Evolution Algorithm with Cooperative Emigrant Creation Strategy

Application of a Derivative-Free Method with Projection Skill to Solve an Optimization Problem

Parameters setting is an important problem of evolution algorithms, include differential evolution algorithm. It has an effect on the performance of evolution algorithms. Although there is only three control parameters in differential evolution (DE) algorithm, the parameters setting is also a difficult problem. Self-adaptation is highly beneficial for adjusting the control parameters, especially when done without any user interaction. This paper presents differential evolution algorithm, called (AdaptDE), which use self-adaptive mechanisms applied to the control parameters. It can get the optimal control parameters for different optimization problem without user interaction. Experimental results indicate that AdaptDE algorithm is efficient and feasible. It is superior to jDE algorithm and FADE algorithm on the quality of solution.

A self-competitive mutation strategy for Differential Evolution algorithms with applications to Proportional–Integral–Derivative controllers and Automatic Voltage Regulator systems

In this work, a method to control the parameters of Differential Evolution (DE) algorithm is proposed. Here the control parameters of DE are co-evolved by Particle Swarm Optimization (PSO) algorithm. The classical DE algorithm has two main control parameters: Scale Factor (F) and Cross-over Rate (CR). These are selected on trial-and-error basis for solving optimization problems. Several optimization problems lead to optimal or sub-optimal solution by proper selection of control parameters of the DE algorithm. In this proposed method, PSO algorithm is used to tune the scale factor and cross-over rate in DE algorithm. Basically PSO algorithm is used as a meta-optimizer for DE algorithm. The proposed method is termed as mPSO-DE in this paper. The mPSO-DE algorithm is applied on 12 benchmark unconstrained optimization problems. The obtained results are compared with that of classical DE algorithm. From the experimental studies, it has been found that the proposed mPSO-DE algorithm performed better than DE algorithm.

The Differential Evolution (DE) algorithm, under the family of Evolutionary Algorithms (EAs), is one of the powerful algorithms used for solving continuous parameter optimization challenges. The simplistic nature and robustness of the classical DE algorithm have drawn researchers' attention towards its progressive enhancement. This work reports on an investigation of the behavioral changes of the classical DE algorithm, evoked when its mutation and crossover components are fine tuned for enhancement of DE's performance. The scope of this study covers the implementation of a mutation level enhancement and a crossover level enhancement, followed by their integration. The mutation and the crossover components are augmented by incorporation of Centroid DE and Superior-Superior & Superior-Inferior DE logics, respectively. The algorithms appraised in this inquiry were classical DE, Centroid based DE(cDE), Superior-Superior based DE (ssDE), Superior-Inferior DE (siDE), Centroid Superior-Superior DE (cssDE) and Centroid Superior-Inferior DE (csiDE). These algorithms were evaluated by comparison of the values of their mean objective function (MOV), and their speed, at solving the global optimization problems in a simple benchmarking function suite with 4 functions of different categories. The study concludes that the DE algorithm shows enhancement performance with modified mutation and crossover components. However, with a trend for inconsistency for varying values of its control parameters and benchmarking problems.

Differential Evolution (DE) is a simple, powerful and easy to use global optimization algorithm. DE has been studied in detail by many researchers in the past years. In DE algorithm trial vector generation strategies have a significant influence on its performance. This research studies that whether performance of DE algorithm can be improved by incorporating selection advancement in effective trial vector generation strategies. A novel advancement in DE trial vector generation strategies is proposed in this research to speeds up the convergence speed of DE algorithm. The proposed fitness proportion based random vector selection DE (FPRVDE) is based on the proportion of individual fitness mechanism. FPRVDE reduces the role of poor performing individuals to enhance it performance capability of DE algorithm. To form a trial vector using FPRVDE, individual based on the proportion of their fitness are selected. FPRVDE mechanism is applied to most commonly used set of DE variants. A comprehensive set of multidimensional function optimization problems is used to access the performance of FPRVDE. Experimental result shows that proposed approach accelerates DE algorithm.

Application of a Derivative-Free Method with Projection Skill to Solve an Optimization Problem

Regulation-based formulas and improved Differential Evolution(DE) algorithm is used to optimize PID parameters. In order to improve the global search ability and the convergence rate of the common DE algorithm, self-adaptive method is introduced to obtain DE parameters. On the other hand, initial population quality of DE algorithm has important influence on convergence of the algorithm. So the regulation-based formulas are used to guide the production of initial population, which is good to improve the convergence rate and realize obtaining of PID parameters completely adaptive without any personal experience. The simulation is developed on steam temperature system of cycle fluidized bed boiler with serious parameter uncertainties and many disturbance and long-time delay. The results show that the improved DE algorithm has higher optimal speed, small amount of calculation and effective optimization of parameters. The proposed method has better control quality and system robustness.

Information utilization based modified Differential evolution algorithm (IUMDE) is an improved version of DE algorithm. In IUMDE, Mutation and Selection operation of basic Differential Evolution (DE) algorithm are modified. In proposed IUMDE initially modified mutation operation provides a selection criterion of base vector before performing the basic DE mutation operation. Further the modified selection operation utilizes the neglected trial vector and hence helps to improve the performance of DE algorithm. In this paper IUMDE algorithm is employed on 6 constrained benchmark optimization problems, selected from the literature. The numerical results expose that the IUMDE algorithm perform more accurately and significantly better than other algorithms with these constrained optimization problems.

A differential evolution algorithm with intersect mutation operator

In response to the low accuracy exhibited by the Storm Water Management Model (SWMM), we propose an enhanced Differential Evolution and Bayesian Optimization Algorithm (DE-BOA) . This algorithm integrates the global search capability of the differential evolution algorithm with the local search capability of the Bayesian optimization algorithm, which enables a more comprehensive exploration of the vector solution space. A comparative analysis of various types of rainfall events is conducted. For model calibration and validation, a drainage subzone in Jinshazhou, Guangzhou City, is selected as the research subject. In total, 20 specific rainfall events are selected, and the DE-BOA algorithm outperforms the manual calibration, differential evolution algorithm, and Bayesian optimization algorithm regarding model calibration accuracy. Furthermore, the DE-BOA algorithm exhibits robust adaptability to rainfall events characterized by multiple peaks and higher precipitation levels, with Nash–Sutcliffe Efficiency coefficient values surpassing 0.90. This study’s findings could hold significant reference value for dynamically updating model parameters, thereby enhancing the model simulation performance and improving the accuracy of the urban intelligent water management platform.

Model parameter identification for lithium-ion batteries using adaptive multi-context cooperatively co-evolutionary parallel differential evolution algorithm

The paper considers dimensional synthesis of a path generator four-bar linkage by applying the modified Differential Evolution (DE) algorithm. During the search of the space, the DE algorithm may skip the right solution and lead to premature convergence. If the step is reduced, the search space is reduced as well, so that convergence becomes slower. Search efficiency may be achieved by including Lévy Flight in the DE algorithm. Namely, when the DE algorithm identifies the space of best solution, then a Levý Flight step is used for local search in that region, which significantly increases the exploitation capability and allows obtaining a very efficient solution of the optimization problem. The algorithm was tested with three examples of dimensional synthesis of a path generator four-bar linkage. The proposed algorithm can be very efficiently applied to solving very complex optimization problems.

A novel modified bat algorithm hybridizing by differential evolution algorithm

In this paper, we propose a differential evolution (DE) algorithm variant with a combination of multiple mutation strategies based on roulette wheel selection, which we call MMRDE. We first propose a new, reflection-based mutation operation inspired by the reflection operations in the Nelder–Mead method. We design an experiment to compare its performance with seven mutation strategies, and we prove its effectiveness at balancing exploration and exploitation of DE. Although our reflection-based mutation strategy can balance exploration and exploitation of DE, it is still prone to premature convergence or evolutionary stagnation when solving complex multimodal optimization problems. Therefore, we add two basic strategies to help maintain population diversity and increase the robustness. We use roulette wheel selection to arrange mutation strategies based on their success rates for each individual. MMRDE is tested with some improved DE variants based on 28 benchmark functions for real-parameter optimization that have been recommended by the Institute of Electrical and Electronics Engineers CEC2013 special session. Experimental results indicate that the proposed algorithm shows its effectiveness at cooperative work with multiple strategies. It can obtain a good balance between exploration and exploitation. The proposed algorithm can guide the search for a global optimal solution with quick convergence compared with other improved DE variants.