Performance Analysis of Wireless Network Throughput and Security Protocol Integration

On a framework for energy-efficient security protocols in wireless networks

Wireless Local Area Network (WLAN) is an alternative in overcoming cabling problems in a local network. Often wireless network security that is installed still uses vendor default settings such as SSID, IP Address, remote management, DHCP enabled, frequency channels, without encryption, even user or password for wireless administration. How does a strong WLAN security system work? The most common security system applied to wireless networks at this time is starting from securing access points by applying the MAC Filtering concept, using WPA / WPA2-PSK security keys, and RADIUS server authentication. To see the quality of wireless LAN network security, how do you analyze the test of the existing security system in the network. The method that can be used in evaluating wireless networks is by testing the system by simulating forms of attacks on wireless networks with the Penetration Testing method. By carrying out 4 stages of research using the penetration testing method (i) the planning stage, (ii) the discovery stage, (iii) the attack stage and (iv) the report stage, from the attack stage (Cracking The Encryption, Bypassing MAC Address, Attacking The Infrastructure and MITM ) using Kali Linux got the results of four types of attacks carried out, only one of which was failed, namely the cracking attack type of the encryption on the RADIUS server due to using captive portal authentication

Wireless networking is a crucial component of communication in this era of digitization. The key characteristics that determine a wireless network's performance are smooth connectivity, quicker communication, and increased customer satisfaction. Scalability deals with the erratic workload and new resources that are added to the network. Scalability is crucial for both Quality of Experience (QoE) and Quality of Service (QoS) in such a power-constrained environment because wireless devices are battery-operated. Managing power consumption and network performance simultaneously in scalable networking scenario is quite challenging, especially during handover. This research proposed a methodology to assess the impact of scalability on wireless node power consumption and network performance in order to develop energy-efficient handoff mechanisms. The Type-I and Type-II wireless node sets were used between the WiFI and WiMAX networks in a vertical handover scenario. In the study, two distinct scalability scenarios were taken into account. Three distinct voltage levels—cutoff voltage, nominal voltage, and charge voltage —had been used to examine the consumption of power. Throughput, residual energy, and Packet Delivery Ratio (PDR) were computed to examine the network's performance in a scalable, power-constrained context. Two different scalability scenarios were considered in the study. The power consumption was investigated using three different voltage levels: charge voltage, nominal voltage, and cutoff voltage. The network's performance under scalable, power-constrained conditions was investigated by computing throughput, packet delivery ratio (PDR), and residual energy. The result obtained in the study showed the variation in battery drainage of wireless nodes under the effect of various scalability factors. This study will provide a blueprint for developing novel algorithms which eventually will improvise network performance and strengthen the base of Green Networking.

Wireless communication provides users many benefits such as portability, flexibility, reduced hardware need and lower installation costs. Wireless local area networks (WLANs) for example allow users the ability to carry their laptops from place to place without any physical wires and without losing network connectivity.However, some amount of security risk is always associated with wireless networks. The most significant security risk for wireless technology is the potential outsiders have in gaining access to the communications medium, the communications medium being the air waves. Though WLANs provide the users with the option of roaming, this convenience is facilitated by broadcasting packets to anyone with compatible equipment within range of a transmitting device. This broadcasting of packets induces a compromise between convenience and security. Having an unsecured WLAN can result in a loss of service, or can be used as a staging area to launch attacks against other networks. The significant challenges faced today in securing wireless LANs are maintaining privacy, data confidentiality, and preventing unauthorized access using proper access control mechanisms.As wireless networking and security become more prevalent in the market, more and more computer science programs are incorporating courses in wireless networks or at the least, devoting a significant percentage of the advanced networking courses to wireless topics. As a result, in addition to industry practitioners, there is a growing interest among university researchers and faculty regarding tools used in monitoring and assessing security threats for wireless networks.This paper will demonstrate and evaluate a free and open source software tool, called Network Stumbler, used for monitoring and assessing security threats for wireless networks. Network Stumbler is a Windows-based tool that allows you to detect Wireless Local Area Networks (WLANs) using 802.11b, 802.11a and 802.11g. It has many uses:• Verifies that your network is set up the way you intended.• Find locations with poor coverage in your WLAN.• Detects other networks that may be causing interference on your network.• Detects unauthorized rogue access points in your workplace.• Helps aim directional antennas for long-haul WLAN links.• Can be used recreationally for WarDriving.

The massive growth of data consumption and the variety of wireless technology emergence has made the handover (HO) an attractive research topic nowadays, mainly due to the popularity of Wireless Local Area Networks (WLANs), which allow users to reach high-speed data communication while they are in movement. Moreover, mobile devices such as tablets and smartphones have also become increasingly popular due to their low cost and ease of use, and an increase in mobile device use is expected to accelerate in the coming years, along with the availability and use of applications such as real-time services and online gaming. The traditional HO methods will likely not meet the requirements of mobile devices for modern applications due to the lack of intelligence, lack of awareness Quality of Service (QoS) and Quality of Experience (QoE) requirements of mobile users. We, therefore, introduce a novel architecture that supports horizontal HO in homogenous networks. This architecture is based on the Software-Defined Wireless Networking (SDWN) concept, where the wireless network is controlled centrally and the wireless Access Points (APs) are programmable. In this architecture, HO algorithms will assist wireless users to find the network that could best support the application requirements through Quality of Service (QoS) and Quality of Experience (QoE) management policies. The first HO algorithm proposed in this thesis is called Quality of Experience Oriented Handover Algorithm. This algorithm will guarantee the best possible connectivity to the users in terms of their QoE and QoS requirements and outperforms the traditional methods in a sparse network environment. The second contribution is called Optimised Handover Algorithm for Dense WLAN Environments. This algorithm has been designed to address dense network environments via taking into consideration the Adaptive Hysteresis Value (AHV). The AHV will help the Optimised Handover Algorithm via reducing the so-called ping-pong effect. This contribution shows promising performance results by selecting the best candidate AP, decreasing the number of redundant HO and avoiding the ping-pong effect. The final contribution is called Priority Based Handover Algorithm. We extended our proposed SDWN architecture in order to include the concept of prioritising users and make a smart decision during the process of HO. This algorithm will prioritise a certain class of users to avoid the effect of the over-congestion. The results show that the approach based on priority outperforms the state of the art and provides better QoE to the high priority users despite the over-congestion situation.

A new multi-rat scheduling algorithm for heterogeneous wireless networks

Wireless local area networks (WLANs) have risen in popularity for in-car networking systems that are designed to make driving safer. Wireless mesh networks (WMNs) are widely deployed to expand the coverage of high-speed WLANs and to support last-mile connectivity for mobile users anytime and anywhere at low cost. Many recent measurement studies have shown that the traffic arrival process in wireless networks exhibits the bursty and correlated nature. A new analytical model is developed in this paper as a cost-effective performance tool to investigate the quality-of-service (QoS) of the WMN that interconnects multiple WLANs in the presence of bursty and correlated traffic. After validating its accuracy via extensive simulation experiments, the analytical model is then used to investigate the performance of the hybrid wireless networks.

Wireless local area network (WLAN) has changed the paradigm of communication and become ubiquitous. As the number of devices connected to wireless is increasing, it is therefore, essential to find vulnerabilities in the security of wireless networks. In this research WLAN security vulnerabilities are exposed in real time. WLAN security techniques (MAC filtering, Hidden SSID and WPA2) available to residential users were practically exploited. Tenda WiFi wireless access point was set up with MAC filtering, hidden SSID and WPA2 security mechanisms in different combinations in such a way as to add an additional layer of security to previous configuration. Kali Linux version 2017.1 was used as a platform to exploit WLAN networks in real time. In this research, the sensitive information broadcasted by WLAN was utilized to carry out attacks on wireless networks. A practical demonstration of exposing vulnerabilities in MAC filtering, Hidden SSID with MAC filtering and WPA2-PSK with hidden SSID and MAC filtering security mechanisms of AP was carried out in real time. It was observed that the existing security mechanisms were vulnerable. Researchers have exploited many security mechanisms of WLAN focusing upon a single parameter of WLAN security at a time. However, in this work, the three available security mechanisms were cascaded to produce a three layer security mechanism i.e. WPA2 with hidden SSID and MAC filtering. This cascaded model was exploited in real time.

SonicWALL Secure Wireless Network Integrated Solutions Guide

The increasing demand for the coverage of high‐speed wireless local area networks (WLANs) is driving the installation of a very large number of access points (APs). Wireless mesh networks (WMNs) have emerged as a promising technology in the next generation networks to provide economical and scalable broadband access to wireless interconnection of multiple APs that manage individual WLANs in order to extend the coverage of the conventional single WLANs. In this paper, we develop a new analytical model to investigate the quality‐of‐service (QoS) performance metrics in WMNs interconnecting multiple WLANs. The model takes the phenomenon of communication locality into consideration. Extensive simulation experiments are conducted to validate the accuracy of the analytical model. The proposed model is then used to obtain the maximum achievable throughput, which is a key performance metrics in wireless networks. Moreover, we utilize the model to evaluate the impact of communication locality on network performance and investigate its effects on the optimization of integrated WLANs and multi‐hop mesh networks. Copyright © 2009 John Wiley & Sons, Ltd.

Modelling and simulation of Rayleigh fading, path loss, and shadowing fading for wireless mobile networks

Recent demands on affordable, portable wireless communication and computation devices have resulted in exponential growth of wireless networks ranging from Wireless Local Area Networks (WLAN) and Wireless Wide Area Networks (WWAN) to Ad-Hoc and Sensor networks. The major goal of wireless communication is to allow users to communicate together and to have access to global network anytime anywhere. This has led to wide acceptance of infrastructure based cellular networks (WWANs) where mobile stations communicate with a centralized controller, often referred as Access Point (AP) that is connected to the wired networks. On the other hand, WLANs have appeared as dominant popular technologies in many venues including a local area such as an academic campus or an airport terminal. These wireless networks mostly rely on IEEE 802.11 Wi-Fi (Wireless Fidelity) technology and its various derived versions (i.e. 802.11a,b,g). IEEE 802.11 standard supports two operational modes: The infrastructure-based Wireless Local Area Networks (WLANs) and an infrastructure-less Ad-Hoc Networks. A WLAN (Conti, 2003) typically imposes the existence of an AP and normally is connected to the wired networks to provide internet access for mobile devices. Obviously, only one hop link is needed to communicate between mobile devices and AP. In contrast, there is no AP or infrastructure in Ad-Hoc networks. Any two stations can communicate directly when they are in the range of reception of each other. To this end, the stations may use multi-hop routing to deliver their packets to destinations. The ad-hoc protocols (Conti, 2003; Mohapatra & Krishnamurthy, 2005) are self-configured for address and routing in the face of mobility and the network topology may change in each configuration. The multi-hop wireless ad-hoc networks, or multi-hop wireless networks enable wireless networking in the environments where the wired or cellular connections are impossible, inadequate, or cost effective (e.g. battle field, disaster recovery, etc.). The popularity of internet over the last decades has resulted in rapid advancement of demanding applications. The Transmission Control Protocol/Internet Protocol (TCP/IP) (Stevens, 1994) is a well-known de facto protocol in developing today’s internet. Basically, TCP provides a connection-oriented and reliable end-to-end data delivery between two hosts in traditional wired networks. Since TCP is well tuned and due to its wide acceptance in internet, it is desirable to extend and adopt its functionality to wireless networks. On the

Over the last couple of years, many heterogeneous wireless access technologies have emerged and they have become an integral part of the Internet. In particular, we have experienced an explosive growth in the use of Wireless Local Area Networks (WLANs) and cellular networking technologies (such as Code Division Multiple Access (CDMA), Universal Mobile Telecommunication System (UMTS), General Packet Radio Service (GPRS)). High mobility of wireless users requires that the underlying heterogeneous network infrastructure provides uninterrupted wireless connectivity and service access anywhere, anytime. An additional requirement that is becoming increasingly important for mobile users is the ability to maintain secure connections while on the move across different wireless access technologies. There are some significant challenges (for example, fast, secure handoffs) that need to be overcome to achieve this goal because there is no single end-to-end security protocol that works across both WLANs and cellular networks. We review the various security protocols currently deployed over WLANs and cellular networks. We discuss some of the most recent research efforts on end-to-end security techniques that have been recently deployed across integrated WLAN-Cellular networks. We highlight some of the main benefits and major limitations associated with each security approach. It is hoped that the security solutions discussed will benefit other researchers and designers working to solve the challenge of providing seamless, secure service access across heterogeneous WLAN/Cellular networks.

Automated interference detection is required for operation and management services in wireless networks as Wireless Local Area Networks (WLANs) based on IEEE 802.11 Standard since co-channel interference from other wireless transmitters occurs irregularly. We propose a new approach for detecting the presence of interference on 802.11 links. Our solution focuses on the Access Point (AP)-initiated monitoring approach without Wireless Station (STA)-initiated additional function and sniffer devices. Our approach uses the geographical distribution of the response delay of the Acknowledgment packet (ACK) to the downlink packet that AP transmitted to STAs. The proposed method consists of a continuous monitoring step and a periodical diagnosis step to measure network statistics by ACK response delay between an AP and STAs and to detect whether and where interference occurs respectively. Comprehensive simulation results show that the proposed approach has a good accuracy and low misdetection ratio for diagnosing the interference existence and location in IEEE 802.11 WLANs.

Many wireless local area network (WLAN) performance estimations are done with the assumption of uniformly distributed stations (STAs). In practice, on the contrary STAs are distributed unevenly among access points (APs), causing hot-spots and under utilized APs in a wireless network. Considering a WLAN is made up of multiple APs, having some APs carrying excessive loads (i.e. hot-spots) degrades both the considered APs as well as the overall network performance. The system performance can be improved by associating incoming STAs effectively throughout the network, in a sense to balance the network load evenly between APs and relieve the hot-spot congestion. Currently employed user association method in IEEE 802.11 WLANs considers only the received signal strength of APs at STAs, and associates STAs to the closest (in signal strength sense) AP, ignoring its load and interference value.Novel user association algorithms are required for congestion relief and network performance improvement. In this work, a new distributed association algorithm taking into consideration not only the received signal strength of the APs at STAs but also AP loadings and interference is proposed. A new AP load calculation method acknowledging the interference between STAs and APs is presented. Our simulations demonstrate that the proposed algorithm can improve the overall system throughput performance more than 50% and offers a better load distribution across the network compared to conventional association algorithm.