Performance of Reed-Solomon Based Quasi-Cyclic LDPC Codes Based on Protograph

DOI: 10.1049/cp:20061337 ISBN: 0 86341 644 6 Location: Hangzhou, China Conference date: 6-9 Nov. 2006 Format: PDF The BER performance of presented quasi-cyclic (QC) low-density parity-check (LDPC) codes is not good as that of randomly constructed LDPC codes, while the lack of structure of randomly constructed LDPC codes implies serious disadvantages in terms of storing and accessing a large parity-check matrix. To solve the problems, this paper proposes a design of good quasi-cyclic (QC) low-density parity-check (LDPC) codes, the obtained algebraically structured codes have large minimum distances and good BER performance. The proposed design is based on index matrices, which determines the shifts of the circulant matrices of the sparse parity-check matrices. Compared with the presented design of QC LDPC codes, the designed QC LDPC codes are free from girth 4, sometimes free from girth 6, and have much larger minimum distances. Based on the algebraic code structure, the conditions of the girth and minimum distance of the codes are found. The BER performance of the designed QC LDPC block codes compares with that of randomly constructed LDPC codes for any block lengths. Better BER performance is obtained by increasing the circulant size of the base QC code. Simulations verify the construction of the QC LDPC codes to be valid. (4 pages) Inspec keywords: AWGN channels; error statistics; channel coding; algebraic codes; parity check codes; sparse matrices Subjects: Algebra; Other topics in statistics; Codes

The generator matrix of quasi-cyclic low-density parity-check (QC-LDPC) codes is not, in general, in systematic form. Therefore, finding the message corresponding to a detected codeword at the receiver is not as straightforward as it is in the case of systematic codes. In this paper, we propose two methods for finding the message from the codeword in a QC-LDPC code. The first method is a general scheme which views the problem as a set of linear equations. This method is not realizable with pure digital circuits and may be implemented by having a processor core in the design. The second method is rather an alternative scheme which makes use of a particular structure in generator matrices of QC-LDPC codes in order to find the message from a non-systematic codeword. We examine a large class of non-systematic Latin squares QC-LDPC codes and one of the IEEE 802.16e standard QC-LDPC codes, and show that they have the required structure to be usable by the algorithm. The latter method is realizable in hardware and can be implemented with a digital circuit consisting of XOR gates.

Recently, Low Density Parity-Check (LDPC) codes based on Affine Permutation Matrices (APM) drew lots of attention. Compared with the Quasi-Cyclic LDPC (QC-LDPC) codes, these kinds of codes have some advantages. APM-LDPC codes obtain lower cycle-distributions, minimum hamming distance and greater girth. This paper explains the importance of cyclic distribution by comparing APM-LDPC codes with QC-LDPC codes. Then a particular form of APM-LDPC codes is proposed and researched. The new codes can low down the cycle-distribution to larger extent. In the following research, an effective method, which constructs the new codes with fixed girth, is proposed. Simulations show that the construction method is reasonable and effective. The transmission performances are better than the traditional methods, as well. Finally, the implementation and verification are carried out on FPGA.

Array based quasi-cyclic LDPC codes and their tight lower bounds on the lifting degree

Quasi-cyclic LDPC (QC-LDPC) codes have been accepted as the standard codes of 5G enhanced mobile broadband data channel. These standard codes are designed to support multiple lifting sizes and possess rate-compatible property, which can help adapt various information lengths and code rates well. In this paper, we propose an <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">algebra-assisted</i> method for constructing QC-LDPC codes with such properties. We will first review the encoding mechanism and requirements of 5G LDPC codes, and present <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">cycle analysis</i> for such emerging codes. We then propose a metric, referred to as <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">weighted average number of cycles</i> (WANC), from the perspective of cycle structure for constructing the QC-LDPC codes that can support <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">multiple lifting sizes</i> . Based on the WANC metric and algebraic methods, we develop a simple and practical algorithm to construct this kind of QC-LDPC codes. We finally apply the proposed algorithm to construct the exponent matrices for cases of 5G LDPC codes and the standard LDPC codes of consultative committee for space data systems, respectively. Simulation results show that the proposed WANC metric and designed algorithm are feasible and effective, and thus can be utilized to design other similar QC-LDPC codes.

In this paper we propose a method of constructing quasi-cyclic low-density parity-check (QC-LDPC) codes of large length by combining QC-LDPC codes of small length as their component codes, via the Chinese Remainder Theorem. The girth of the QC-LDPC codes obtained by the proposed method is always larger than or equal to that of each component code. By applying the method to array codes, we present a family of high-rate regular QC-LDPC codes with no 4-cycles. Simulation results show that they have almost the same performance as random regular LDPC codes.

A novel construction method of quasi-cyclic low-density parity-check (QC-LDPC) code is proposed based on the finite field multiplicative group, which has easier construction, more flexible code-length code-rate adjustment and lower encoding/decoding complexity. Moreover, a regular QC-LDPC(5334,4962) code is constructed. The simulation results show that the constructed QC-LDPC(5334,4962) code can gain better error correction performance under the condition of the additive white Gaussian noise (AWGN) channel with iterative decoding sum-product algorithm (SPA). At the bit error rate (BER) of 10−6, the net coding gain (NCG) of the constructed QC-LDPC(5334,4962) code is 1.8 dB, 0.9 dB and 0.2 dB more than that of the classic RS(255,239) code in ITU-T G.975, the LDPC(32640,30592) code in ITU-T G.975.1 and the SCG-LDPC(3969,3720) code constructed by the random method, respectively. So it is more suitable for optical communication systems.

In this letter, we consider two problems associated with quasi-cyclic low-density parity-check (QC-LDPC) codes. The first is how to extend the code length of a QC-LDPC code without reducing the girth. The second is how to design a QCLDPC code with a prescribed girth easily. We deal with these two problems by using a combining method of QC-LDPC codes via the Chinese Remainder Theorem (CRT). Codes constructed with our proposed method have flexible code lengths, flexible code rates and large girth. Simulation results show that they perform very well with the iterative decoding.

In this paper, we propose a simple mathematical structure to improve the BER (bit error rate) performance of quasi-cyclic low-density parity-check (QC-LDPC) codes. Since the proposed structure can be defined in-between those of random codes and structured codes, these proposed QC-LDPC codes not only perform as well as random-LDPC codes, but also preserve the advantage of structured LDPC codes which is easier to implement over coding hardware. Moreover, the proposed structure, constructed from balanced incomplete block design (BIBD), can reduce the density of parity-check matrix and hence reduce the number of short cycles, which generally lead to better performance. At the end, we show that the error floor performance of QC-LDPC codes can be improved by proposed hybrid structures and perform well over binary-input additive white Gaussian noise (BI-AWGN) channel.

Seeking good error correcting codes to improve the efficiency of continuous-variable quantum key distribution (CVQKD) reconciliation is a concerning issue. Due to the introduction of multidimensional reconciliation, the error correcting techniques in the classical binary-input additive white Gaussian noise channel are applicable to CVQKD. In this Letter, we apply the quasi-cyclic low-density parity-check (QC-LDPC) codes, which are specified in 5G protocol, to the reconciliation process. Simulation results show that the reconciliation efficiency can reach 92.6% when the code rate is 22/68 and the signal-to-noise ratio is 0.623. Such a new error correcting code points out a new direction for the development of CVQKD.

SUMMARYLow encoding complexity is very important for quasi‐cyclic low‐density parity‐check (QC‐LDPC) codes used in wireless communication systems. In this paper, a new scheme is presented to construct QC‐LDPC codes with low encoding complexity. This scheme is called two‐stage particle swarm optimization (TS‐PSO) algorithm, in which both the threshold and girth distribution of QC‐LDPC codes are considered. The proposed scheme is composed of two stages. In the first stage, we construct a binary base matrix of QC‐LDPC code with the best threshold. The matrix is constructed by combining a binary PSO algorithm and the protograph extrinsic information transfer (PEXIT) method. In the second stage, we search an exponent matrix of the QC‐LDPC code with the best girth distribution. This exponent matrix is based on the base matrix obtained in the first stage. Consequently, the parity‐check matrix of the QC‐LDPC code with the best threshold and best girth distribution are constructed. Furthermore, bit error rate performances are compared for the QC‐LDPC codes constructed by proposed scheme, the QC‐LDPC code in 802.16e standard, and the QC‐LDPC code in Tam's study. Simulation results show that the QC‐LDPC codes proposed in this study are superior to both the 802.16e code and the Tam code on the additive white Gaussian noise (AWGN) and Rayleigh channels. Moreover, proposed scheme is easily implemented, and is flexible and effective for constructing QC‐LDPC codes with low encoding complexity. Copyright © 2012 John Wiley &amp; Sons, Ltd.

Turbo codes are attractive compared with Low Density Parity Check (LDPC) codes for Forward Error Correction (FEC) applications mainly due to their superior performance, especially at low Signal-to-Noise Ratio (SNR) such as are common in Powerline channels. For example, IEEE 1901-FFT PHY used the Turbo coding scheme defined in the HomePlug AV standards. However, patent fees are usually required for each turbo-code enabled manufactured device. The objective of this paper is to examine whether unlicensed LDPC codes, with optimized choices of block lengths, could be a viable alternative for future Powerline Communications (PLC) applications. The paper shows that the performance of the LDPC codes can approximate that of the Turbo codes with higher block lengths, on channels with typical and realistic PLC characteristics. The paper also shows that the additional complexity associated with this increase in block length can be mitigated by the use of Quasi-Cyclic LDPC (QC-LDPC) codes.

In this paper, we first propose a general framework for constructing quasi-cyclic low-density parity-check (QC-LDPC) codes based on a two-dimensional (2-D) maximum distance separable (MDS) code. Two classes of QC-LDPC codes are defined, whose parity-check matrices are transposes of each other. We then use a 2-D generalized Reed-Solomon (GRS) code to give a concrete construction. The decoding parity-check matrices have a large number of redundant parity-check equations while their Tanner graphs have a girth of at least 6. The minimum distances of the codes are very respectable as far as LDPC codes are concerned. We further show that many existing constructions of QC-LDPC codes based on finite fields in the literature can be unified under this construction. Experimental studies show that the constructed QC-LDPC codes perform well with the sum-product algorithm (SPA).

In this paper, we present an algorithm to find all low-weight codewords in a given quasi-cyclic (QC) low-density parity-check (LDPC) code with a fixed column-weight and girth. The main idea is to view a low-weight codeword as an (a, 0) trapping sets, and then show that each topologically different (a, 0) trapping set can be dissected into smaller trapping sets. The proposed search method relies on the knowledge of possible topologies of such smaller trapping sets present in a code ensemble, which enables an efficient search. Combined with the high-rate QC LDPC code construction which successively adds blocks of permutation matrices, the algorithm ensures that in the code construction procedure all codewords up to a certain weight are avoided, which leads to a code with the desired minimum distance. The algorithm can be also used to determine the multiplicity of the low-weight codewords with different trapping set structure.

This paper presents four different integer sequences to construct quasi-cyclic low-density parity-check (QC-LDPC) codes with mathematical theory. The paper introduces the procedure of the coding principle and coding. Four different integer sequences constructing QC-LDPC code are compared with LDPC codes by using PEG algorithm, array codes, and the Mackey codes, respectively. Then, the integer sequence QC-LDPC codes are used in coded cooperative communication. Simulation results show that the integer sequence constructed QC-LDPC codes are effective, and overall performance is better than that of other types of LDPC codes in the coded cooperative communication. The performance of Dayan integer sequence constructed QC-LDPC is the most excellent performance.