Perspectival GAN - Architectural form-making through dimensional transformation

A comprehensive empirical study on bug characteristics of deep learning frameworks

Deep learning (DL) frameworks serve as the backbone for a wide range of artificial intelligence applications. However, bugs within DL frameworks can cascade into critical issues in higher-level applications, jeopardizing reliability and security. While numerous techniques have been proposed to detect bugs in DL frameworks, research exploring common API patterns across frameworks and the potential risks they entail remains limited. Notably, many DL frameworks expose similar APIs with overlapping input parameters and functionalities, rendering them vulnerable to shared bugs, where a flaw in one API may extend to analogous APIs in other frameworks. To address this challenge, we propose MirrorFuzz, an automated API fuzzing solution to discover shared bugs in DL frameworks. MirrorFuzz operates in three stages: First, MirrorFuzz collects historical bug data for each API within a DL framework to identify potentially buggy APIs. Second, it matches each buggy API in a specific framework with similar APIs within and across other DL frameworks. Third, it employs large language models (LLMs) to synthesize code for the API under test, leveraging the historical bug data of similar APIs to trigger analogous bugs across APIs. We implement MirrorFuzz and evaluate it on four popular DL frameworks (TensorFlow, PyTorch, OneFlow, and Jittor). Extensive evaluation demonstrates that MirrorFuzz improves code coverage by 39.92% and 98.20% compared to state-of-the-art methods on TensorFlow and PyTorch, respectively. Moreover, MirrorFuzz discovers 315 bugs, 262 of which are newly found, and 80 bugs are fixed, with 52 of these bugs assigned CNVD IDs.

Image dehazing has always been a challenging topic in image processing. The development of deep learning methods, especially the generative adversarial networks (GAN), provides a new way for image dehazing. In recent years, many deep learning methods based on GAN have been applied to image dehazing. However, GAN has two problems in image dehazing. Firstly, For haze image, haze not only reduces the quality of the image but also blurs the details of the image. For GAN network, it is difficult for the generator to restore the details of the whole image while removing the haze. Secondly, GAN model is defined as a minimax problem, which weakens the loss function. It is difficult to distinguish whether GAN is making progress in the training process. Therefore, we propose a guided generative adversarial dehazing network (GGADN). Different from other generation adversarial networks, GGADN adds a guided module on the generator. The guided module verifies the network of each layer of the generator. At the same time, the details of the map generated by each layer are strengthened. Network training is based on the pre-trained VGG feature model and L1-regularized gradient prior which is developed by new loss function parameters. From the dehazing results of synthetic images and real images, the proposed method is better than the state-of-the-art dehazing methods.

Generative models such as Generative Adversarial Networks (GANs) and Variational Autoencoders (VAEs) play an increasingly important role in medical image analysis. The latent spaces of these models often show semantically meaningful directions corresponding to human-interpretable image transformations. However, until now, their exploration for medical images has been limited due to the requirement of supervised data. Several methods for unsupervised discovery of interpretable directions in GAN latent spaces have shown interesting results on natural images. This work explores the potential of applying these techniques on medical images by training a GAN and a VAE on thoracic CT scans and using an unsupervised method to discover interpretable directions in the resulting latent space. We find several directions corresponding to non-trivial image transformations, such as rotation or breast size. Furthermore, the directions show that the generative models capture 3D structure despite being presented only with 2D data. The results show that unsupervised methods to discover interpretable directions in GANs generalize to VAEs and can be applied to medical images. This opens a wide array of future work using these methods in medical image analysis. The code and animations of the discovered directions are available online at https://github.com/julschoen/Latent-Space-Exploration-CT.KeywordsGenerative modelsUnsupervised learningInterpretabilityCT

In contemporary society, “Indoor Generation” is becoming increasingly prevalent, and spending long periods of time indoors affects well-being. Therefore, it is essential to research biophilic indoor environments and their impact on occupants. When it comes to existing building stocks, which hold significant social, economic, and environmental value, renovation should be considered before new construction. Providing swift feedback in the early stages of renovation can help stakeholders achieve consensus. Additionally, understanding proposed plans can greatly enhance the design of indoor environments. This paper presents a real-time system for architectural designers and stakeholders that integrates mixed reality (MR), diminished reality (DR), and generative adversarial networks (GANs). The system enables the generation of interior renovation drawings based on user preferences and designer styles via GANs. The system’s seamless integration of MR, DR, and GANs provides a unique and innovative approach to interior renovation design. MR and DR technologies then transform these 2D drawings into immersive experiences that help stakeholders evaluate and understand renovation proposals. In addition, we assess the quality of GAN-generated images using full-reference image quality assessment (FR-IQA) methods. The evaluation results indicate that most images demonstrate moderate quality. Almost all objects in the GAN-generated images can be identified by their names and purposes without any ambiguity or confusion. This demonstrates the system’s effectiveness in producing viable renovation visualizations. This research emphasizes the system’s role in enhancing feedback efficiency during renovation design, enabling stakeholders to fully evaluate and understand proposed renovations.

As deep learning is showing unprecedented success in medical image analysis tasks, the lack of sufficient medical data is emerging as a critical problem. While recent attempts to solve the limited data problem using Generative Adversarial Networks (GAN) have been successful in generating realistic images with diversity, most of them are based on image-to-image translation and thus require extensive datasets from different domains. Here, we propose a novel model that can successfully generate 3D brain MRI data from random vectors by learning the data distribution. Our 3D GAN model solves both image blurriness and mode collapse problems by leveraging alpha-GAN that combines the advantages of Variational Auto-Encoder (VAE) and GAN with an additional code discriminator network. We also use the Wasserstein GAN with Gradient Penalty (WGAN-GP) loss to lower the training instability. To demonstrate the effectiveness of our model, we generate new images of normal brain MRI and show that our model outperforms baseline models in both quantitative and qualitative measurements. We also train the model to synthesize brain disorder MRI data to demonstrate the wide applicability of our model. Our results suggest that the proposed model can successfully generate various types and modalities of 3D whole brain volumes from a small set of training data.

Generative adversarial networks(GANs) have been successfully applied for generating high quality natural images and have been extended to the generation of RGB videos and 3D volume data. In this paper we consider the task of generating RGB-D videos, which is less extensively studied and still challenging. We explore deep GAN architectures suitable for the task, and develop 4 GAN architectures based on existing video-based GANs. With a facial expression database, we experimentally find that an extended version of the motion and content decomposed GANs, known as MoCoGAN, provides the highest quality RGB-D videos. We discuss several applications of our GAN to content creation and data augmentation, and also discuss its potential applications in behavioral experiments.

Accurate prediction and confirmation of mechanical properties are critical for the reliable design and deployment of sustainable aluminum–agro-waste composites (AWCs). This study presents a confirmatory analytical–experimental–deep machine learning (DML) framework for the identification of true material properties under multi-response conditions. Experimental characterization yielded mean tensile strength of 190.61 MPa, compressive strength of 287.16 MPa, flexural strength of 243.94 MPa, wear rate of 5.46 × 10⁻⁶ mm³ /N·m, coefficient of friction of 0.34, and fatigue life of 5.86 × 10⁵ cycles, with low variability observed in strength-related properties and higher dispersion in tribological and fatigue responses. Isolated analytical predictions produced comparable estimates for tensile (189.60 MPa), compressive (296.42 MPa), flexural (255.75 MPa), and fatigue properties (5.97 × 10⁵ cycles), but failed to reliably capture tribological behavior, yielding a non-physical negative wear rate (− 4.06 mm³/N·m) and an overestimated coefficient of friction (0.45). Consolidated analytical modeling improved agreement for tensile (187.60 MPa), compressive (285.63 MPa), flexural (244.88 MPa), and fatigue life (5.86 × 10⁵ cycles), yet significantly deviated in tribological predictions, producing unrealistically high wear rate (0.20 mm³/N·m) and coefficient of friction (2.84). To resolve these discrepancies, DML models—implemented via a deep convolutional neural network (ID-CNN) and a hybrid residual CNN guided by a residual-based loss function—were employed to reconcile analytical (isolated/consolidated) predictions with experimental data. The DML framework successfully minimized analytical–experimental residuals and confirmed true predictive reliability for compressive strength, flexural strength, coefficient of friction, and fatigue life, while consistently identifying wear rate as falsely predicted across analytical frameworks. These findings establish DML as both a predictive and diagnostic tool, enabling discrimination between truly confirmed and analytically unstable properties. The proposed framework offers a scalable, data-informed pathway for optimized composite design, process refinement, and industrial adoption, with potential extension to multi-scale modeling and real-time process monitoring. Residual-based DML loss quantifies and minimizes analytical–experimental prediction errors. • Residual-based DML loss quantifies and minimizes analytical–experimental prediction errors. • Integrated analytical–DML modeling confirms strength, fatigue, and friction properties. • Bulk properties converge, while wear rate shows persistent tribological uncertainty. • The framework supports reliable certification and sustainable composite design.

Surface defect recognition (SDC) is essential in intelligent manufacturing. Deep learning (DL) is a research hotspot in SDC. Limited defective samples are available in most real-world cases, which poses challenges for DL methods. Given such circumstances, generating defective samples by generative adversarial networks (GANs) is applied. However, insufficient samples and high-frequency texture details in defects make GANs very hard to train, yield mode collapse, and poor image quality, which can further impact SDC. To solve these problems, this article proposes a new GAN called contrastive GAN, which can be trained to generate diverse defects with only extremely limited samples. Specifically, a shared data augmentation (SDA) module is proposed for avoiding overfitting. Then, a feature attention matching (FAM) module is proposed to align features for improving the quality of generated images. Finally, a contrastive loss based on hypersphere is employed to constrain GANs to generate images that differ from the traditional transform. Experiments show that the proposed GAN generates defective images with higher quality and lower variance between real defects compared to other GANs. Synthetic images contribute to pretrained DL networks with accuracies of up to 95.00%–99.56% for Northeastern University (NEU) datasets of different sizes and 91.84% for printed circuit board (PCB) cases, which proves the effectiveness of the proposed method.

The advent of Generative Adversarial Network (GAN) architectures has given anyone the ability of generating incredibly realistic synthetic imagery. The malicious diffusion of GAN-generated images may lead to serious social and political consequences (e.g., fake news spreading, opinion formation, etc.). It is therefore important to regulate the widespread distribution of synthetic imagery by developing solutions able to detect them. In this paper, we study the possibility of using Benford’s law to discriminate GAN-generated images from natural photographs. Benford’s law describes the distribution of the most significant digit for quantized Discrete Cosine Transform (DCT) coefficients. Extending and generalizing this property, we show that it is possible to extract a compact feature vector from an image. This feature vector can be fed to an extremely simple classifier for GAN-generated image detection purpose.

In a brief period, the rapid increase in interest in Computer Vision and Deep Learning has led to a plethora of different applications on text, images, and videos. Those applications range from simple problems such as “motion detection in static cameras” or “Spam Filtering” to more complex ones such as “Robot Object Grasping through Vision” or “Image Caption Generation.” With the expeditious development of Computer Graphics, and 3D models acquisition technologies, Deep Learning applications on 3D Object Models have attracted increased attention. Sensors can provide us with 3D data with rich geometry, shape, and scale information, and accompanied by 2D images, can grant us with a better understanding of a certain environment. Three-Dimensional Data can be represented in a variety of ways, one of the most commonly used being point clouds (PC), which preserve the primary geometric information in 3D space without any discretization. However, even Deep Learning on Point Clouds is still in its preliminary stages due to challenges encountered when processing PCs with Deep Neural Networks. One of the main challenges is that decent quality PC Models are hard to obtain and often miss parts of data. A way to solve this problem is to create a 3D Shape Completion Model capable of restoring those missing parts. In this dissertation, we will research a family of models, with a variety of applications in Computer Vision, called Deep Generative Models. Specifically, we will expand indepth on Generative Adversarial Networks (GANs) as well as Variational Autoencoders (VAE). GANs create new data based on a set of given training data, with which they have the same statistics, whereas VAEs ensure that their encodings distribution is regularized during the training so that the latent space is of sufficient quality, to generate new data. The main objective is to create a point-based shape completion network based on Deep Generative Models that can complete a partial scheme with reasonable results.

Hyperspectral remote sensing image classification based on residual generative Adversarial Neural Networks

In recent years, Deep Learning (DL), such as the algorithms of Convolutional Neural Networks (CNN), Recurrent Neural Networks (RNN) and Generative Adversarial Networks (GAN), has been widely studied and applied in various fields including agriculture. Researchers in the fields of agriculture often use software frameworks without sufficiently examining the ideas and mechanisms of a technique. This article provides a concise summary of major DL algorithms, including concepts, limitations, implementation, training processes, and example codes, to help researchers in agriculture to gain a holistic picture of major DL techniques quickly. Research on DL applications in agriculture is summarized and analyzed, and future opportunities are discussed in this paper, which is expected to help researchers in agriculture to better understand DL algorithms and learn major DL techniques quickly, and further to facilitate data analysis, enhance related research in agriculture, and thus promote DL applications effectively. Keywords: deep learning, smart agriculture, neural network, convolutional neural networks, recurrent neural networks, generative adversarial networks, artificial intelligence, image processing, pattern recognition DOI: 10.25165/j.ijabe.20181104.4475 Citation: Zhu N Y, Liu X, Liu Z Q, Hu K, Wang Y K, Tan J L, et al. Deep learning for smart agriculture: Concepts, tools, applications, and opportunities. Int J Agric & Biol Eng, 2018; 11(4): 32-44.

In this work we utilize generative adversarial networks (GANs) to synthesize realistic transformations for remote sensing imagery in the multispectral domain. Despite the apparent perceptual realism of the transformed images at a first glance, we show that a deep learning classifier can very easily be trained to differentiate between real and GAN-generated images, likely due to subtle but pervasive artifacts introduced by the GAN during the synthesis process. We also show that a very low-amplitude adversarial attack can easily fool the aforementioned deep learning classifier, although these types of attacks can be partially mitigated via adversarial training. Finally, we explore the features utilized by the classifier to differentiate real images from GAN-generated ones, and how adversarial training causes the classifier to focus on different, lower-frequency features.

Characterization of hydration and dry shrinkage behavior of cement emulsified asphalt composites using deep learning