Photonics-Based High-Resolution 3D Inverse Synthetic Aperture Radar Imaging

Segmentation is a critical step, preliminary to High-level processing such as classification, detection and object extraction from radar images. It provides an easier way to extract information in automatic target recognition (ATR) fields. However, extracting the shape of the target from this kind of images is very difficult task, so this paper presents a new approach for Radar image segmentation and how to be able to extract target shape from 3D Inverse Synthetic Aperture Radar (ISAR) Images by combining mathematical morphology watershed and thresholding methods with top-hat transformation.

Segmentation is a critical step, preliminary to High-level processing such as classification, detection and object extraction from radar images. It provides an easier way to extract information in automatic target recognition (ATR) fields. However, extracting the shape of the target from this kind of images is very difficult task, so this paper presents a new approach for Radar image segmentation and how to be able to extract target shape from 3D Inverse Synthetic Aperture Radar (ISAR) Images by combining mathematical morphology watershed and thresholding methods with top-hat transformation.

We present a method to generate three-dimensional (3D) inverse synthetic aperture radar (ISAR) images of a target at arbitrary aspect angles using the shooting and bouncing ray (SBR) method. We have derived a 3D-image-domain ray-tube integration formula based on the SBR technique. The imaging formula is in a form of convolution, then a nonuniform fast Fourier transform (NUFFT) is induced to achieve the convolution, which can be used to generate 3D ISAR images rapidly. Compared to the conventional algorithm where the ISAR images are obtained by inverse Fourier transforming the computed scattered fields over a range of frequencies and a range of aspect angles, the new formula needs only one-time ray tracing and physical optics (PO) integration over a small angle span. Hence the computational time is decreased tremendously. The ISAR images of a missile target and an armored car for several aspect angles are presented to demonstrate the efficiency and accuracy of the proposed method.

Distributed array radar provides new prospects for three-dimensional (3D) inverse synthetic aperture radar (ISAR) imaging. The accuracy of image registration, as an essential part of 3D ISAR imaging, affects the performance of 3D reconstruction. In this paper, the imaging process of distributed array ISAR is proposed according to the imaging model. The ISAR images of distributed array radar at different APCs have different distribution of scatters. When the local distribution of scatters for the same target are quite different, the performance of the existing ISAR image registration methods may not be optimal. Therefore, an image registration method is proposed by integrating the feature-based method and the area-based method. The proposed method consists of two stages: coarse registration and fine registration. In the first stage, a dominant scatters model is established based on scale-invariant feature transform (SIFT). In the second stage, sub-pixel precision registration is achieved using the local correlation matching method. The effectiveness of the proposed method is verified by comparison with other image registration methods. The 3D reconstruction of the registered experimental data is carried out to assess the practicability of the proposed method.

Three‐dimensional (3D) inverse synthetic aperture radar (ISAR) imaging has been proven feasible by combining traditional ISAR imaging and interferometry. Such technique, namely inteferometric ISAR (In‐ISAR), allows for the main target scattering centres to be mapped into a 3D spatial domain as point clouds. Specifically, the use of an In‐ISAR system can overcome the main geometrical interpretation issues imposed by the monostatic acquisition geometry as the problem of cross‐range scaling and unknown image projection plane (IPP). However, some issues remain such as scatterer scintillation, shadowing effects, poor SNR etc., which limit the effectiveness of 3D imaging. A solution to such unsolved issues can be found in the use of multiple 3D views, which can be obtained exploiting either multi‐temporal or multi‐perspective configurations or a combination of both. This study aims to review the main concepts to produce multi‐view 3D ISAR images by using In‐ISAR systems also presenting real data collected with a multi‐static In‐ISAR system.

Inverse synthetic aperture radar (ISAR) images are frequently used in target classification and recognition applications. Nevertheless, the interpretation of ISAR images remains problematic for several reasons. One of these is the fact that the image plane cannot be defined by the user but instead depends on the target's own motions and on its relative position with respect to the radar. In order to overcome the problem of interpreting two-dimensional (2D) ISAR images, a method for three-dimensional (3D) reconstruction of moving targets is presented. This method is based on the use of a dual interferometric ISAR system. The interferometric phases measured from two orthogonal baselines are used to jointly estimate the target's effective rotation vector and the heights of the scattering centers with respect to the image plane. The scattering center extraction from the ISAR image is performed by applying a multichannel CLEAN technique. Finally, a 3D image of the moving target is reconstructed from the 3D spatial coordinates of the scattering centers. The effectiveness and robustness of the proposed algorithm is first proven theoretically and then tested against several radar-target scenarios as well as in the presence of noise.

Inverse synthetic aperture radar (ISAR) imaging is typically useful when there is a need to classify, recognize, or identify a moving target of interest. In fact, an ISAR image highlights two-dimensional (2-D) geometric features of a target, which can provide indications of target's type, size, and other salient information. Such information can be then used for target classification, recognition, and identification. In this chapter, we will provide five case studies on applications of ISAR imaging. Such case studies are chosen to diversify the type of application and to give additional indications about how to interpret ISAR images. Specifically, in the first case study (Section 12.1), we show an example of ground-based ISAR images of a noncooperative sailing ship. The ISAR techniques used to form the ISAR images are the range-Doppler (Chapter 3) and the ICBA (Chapter 5) techniques. Different time windows are chosen to show the effects of the coherent processing interval (CPI) length on the ISAR image. Since the radar is ground based, this represents a case where the ISAR image is formed by exploiting only the sea surface induced target's motions. The second case study (Section 12.2) refers to a scenario where the radar is carried by an aircraft and the target is a ship at sea. In this case, both the target and the platform motions concur to the ISAR image formation. Also in this case, the range-Doppler and ICBA are used to form the ISAR image sequence. The third case study (Section 12.3) concerns dual ground-based/satellite ISAR imaging of a noncooperative sailing ship. In this experiment two radars are used to image a sailing ship at the same time. Two techniques are here used to form the ISAR images: a refocus technique (see Chapter 8) to form the satellite ISAR image; and a range-Doppler with ICBA to form the ground-based ISAR image. In this case study, we show how a dual system is able to form ISAR images of the same target with different target's views and projections. This is a simple case of multiple-perspective ISAR images, which may be looked at as a way to improve a target's classification and recognition [1]. The fourth case study (Section 12.4) shows ISAR images of four aircrafts obtained by processing data acquired with a ground-base radar. This case study may be regarded as the classic ISAR imaging example. Four different airplanes have been selected to show how their characteristics are mapped onto ISAR images. Such characteristics can then be used by classifiers for recognition purposes.

Inverse synthetic aperture radar (ISAR) imaging has the competence of generating two-dimensional (2-D) high-quality images of remote moving targets, while interferometric ISAR (InISAR) is a technique to reproduce three-dimensional (3-D) high-resolution shapes of targets by employing several ISAR images obtained from different antennas. For the target moving with an invariable acceleration, the Doppler frequency shift of its echoes is proved to be time variant; consequently, the Range-Doppler (RD) algorithm will not work properly for acquiring the clear ISAR image of it. To produce high-resolution ISAR/InISAR image of the maneuvering target, a novel algorithm via the peak extraction technique is proposed. The main contributions made by this paper can be listed as follows: 1) by analyzing ISAR imaging with the RD technique for the target moving with a constant acceleration, it is elaborately demonstrated that each scattering point still corresponds to a unique peak in the defocused ISAR image; 2) the expression of the peak location in the defocused ISAR image corresponding to each scattering point is precisely derived; 3) a novel peak extraction technique is developed for forming a high-resolution radar image of the maneuvering target; 4) due to the discovery that the ISAR images obtained in this way can completely preserve the phase information, a new InISAR imaging method via the peak extraction technique is presented consequently. The correctness of the theoretical derivation and the performance of the new algorithms are illustrated through several simulation experiments.

This article presents efficient technique of two‐dimensional (2D) scattering center extraction and inverse synthetic aperture radar (ISAR) image formation of a target. The proposed technique uses a sparse scanning order conception and modified spatial smoothing preprocessing (MSSP). The MSSP is used to construct autocorrelation matrix. In general, 2D IFFT (inverse fast Fourier transform) is widely used to obtain 2D scattering center and ISAR image. This method is computationally efficient, but has drawbacks that are poor in terms of resolution. To overcome these shortcomings with the IFFT‐based method, various high‐resolution techniques were developed. The proposed algorithm enables us to provide exact scattering centers and ISAR image of a target. In order to show the performances of the proposed technique, we use backscattered field data of the ideal point scatterers and the F‐18 aircraft to estimate 2D scattering centers and obtain 2D ISAR image. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 2173–2178, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23619

Inverse synthetic aperture radar (ISAR) imaging for the target with micro-motion parts is influenced by the micro-Doppler (m-D) effects. In this case, the radar echo is generally decomposed into the components from the main body and micro-motion parts of target, respectively, to remove the m-D effects and derive a focused ISAR image of the main body. For the sparse aperture data, however, the radar echo is intentionally or occasionally under-sampled, which defocuses the ISAR image by introducing considerable interference, and deteriorates the performance of signal decomposition for the removal of m-D effects. To address this issue, this paper proposes a novel m-D effects removed sparse aperture ISAR (SA-ISAR) imaging algorithm. Note that during a short interval of ISAR imaging, the range profiles of the main body of target from different pulses are similar, resulting in a low-rank matrix of range profile sequence of main body. For the range profiles of the micro-motion parts, they either spread in different range cells or glint in a single range cell, which results in a sparse matrix of range profile sequence. From this perspective, the low-rank and sparse properties are utilized to decompose the range profiles of the main body and micro-motion parts, respectively. Moreover, the sparsity of ISAR image is also utilized as a constraint to eliminate the interference caused by sparse aperture. Hence, SA-ISAR imaging with the removal of m-D effects is modeled as a triply constrained underdetermined optimization problem. The alternating direction method of multipliers (ADMM) and linearized ADMM (L-ADMM) are further utilized to solve the problem with high efficiency. Experimental results based on both simulated and measured data validate the effectiveness of the proposed algorithm.

Most existing imaging studies are mainly used for a single target or a composite scene consisting of a target and a rough surface (TRS) below it, such as the target-ocean scene. This article focuses on inverse synthetic aperture radar (ISAR) imaging of a special composite scene consisting of a target and layered rough surfaces (TLRS) below it, such as a target and a snow-soil layered scene. Differently from previous imaging algorithms based on the frequency-domain (FD) method, this article combines the time-domain ray bouncing (TDRB) method with imaging algorithms to develop an accurate ISAR imaging framework to obtain composite images of the TLRS scene. To improve the simulation efficiency of the time-domain (TD) echo matrix for ISAR imaging, the multi-thread parallel is used to accelerate the TD scattering algorithm, then, the ISAR imaging formulas based on scattering field expressions in the TLRS scene are derived. Since the linear frequency modulation pulse used in traditional radar imaging has longer pulsewidth than the Gaussian, the matched filter is modified to realize pulse compression under modulating Gaussian pulse excitations to enhance the imaging efficiency. Simulation results show that the proposed ISAR imaging framework ensures the image quality and improves the simulation efficiency significantly. Finally, the ISAR images of the target-snow-soil scene with different parameters are simulated. This article addresses the correlation between the scattering mechanism and image features for ISAR images based on different scattering components, a topic that the literatures do lack.

Sub-Nyquist sampling is a common means of interfering with inverse synthetic aperture radar (ISAR) imaging, which has been validated for the feasibility of 1-D compressive sensing (CS) ISAR imaging. In order to overcome the high computational complexity of 1-D CS-based ISAR imaging, the coupled 2-D CS algorithms are utilized to achieve ISAR imaging directly which has been proposed recently. In this paper, sub-Nyquist sampling jamming signals are utilized to induce multiple false-target ISAR images by using the coupled 2-D-CS algorithm. The jamming signals, which are formed by the intercepted radar signals under the sub-Nyquist sampling theorem and scattered by moving targets, are collected by ISAR to establish a 2-D super resolution model, and the finally reconstructed ISAR images are induced and show that the deceptive false-target images retaining the real target information. Simulated trails and real data of a Yak-42 plane are used to validate the correctness of the analyses and the finally well-focused false-target images greatly support the effectiveness of the sub-Nyquist sampling idea in the countermeasures of ISAR with coupled 2-D CS.

In this study, we propose an efficient strategy to exploit cross-range resolutions (CRRs) of inverse synthetic aperture radar (ISAR) images to improve classification performance. The proposed method preprocesses an ISAR image of an unknown target using both the CRR of an unknown ISAR image, which can be obtained using the cross-range scaling algorithm, and that of the ISAR images in a training database (DB). Specifically, the proposed method adjusts the unknown ISAR image so that the CRR of the adjusted unknown ISAR image is identical to that of the ISAR images in the training DB. The adjusted unknown ISAR image is then directly used for the subsequent classification task, thus considerably improving classification performance.

In this paper, performance efficiency analysis of compressive inverse synthetic aperture radar (ISAR) imaging for a complex, electrically large target is presented. In this context, physical optics (PO) is used as a high-frequency scattered field prediction technique and compressive sensing (CS) theory is applied to ISAR imaging by exploiting the sparse point scatterer structure of the target. Results prove that CS provides high resolution and accuracy in ISAR imaging even under the Nyquist sampling rate and linearly decreases computational time.

High-resolution three-dimensional (3D) Inverse Synthetic Aperture Radar (ISAR) imaging is essential for the characterization of target scattering in various environments. The practical application of this technique is frequently impeded by the lengthy measurement time necessary for comprehensive data acquisition with turntable-based systems. Sub-sampling the aperture can decrease acquisition time; however, traditional reconstruction algorithms that utilize matched filtering exhibit significantly impaired imaging performance, often characterized by a high peak side-lobe ratio. A methodology is proposed that integrates compressed sensing(CS) theory with sparse-aperture optimization to achieve high-fidelity 3D imaging from sparsely sampled data. An optimized sparse sampling aperture is introduced to systematically balance the engineering requirement for efficient, continuous turntable motion with the low mutual coherence desired for the CS matrix. A deep Bayesian optimization framework was developed to automatically identify physically realizable optimal sampling trajectories, ensuring that the sensing matrix retains the necessary properties for accurate signal recovery. This method effectively addresses the high-sidelobe problem associated with traditional sparse techniques, significantly decreasing measurement duration while maintaining image quality. Quantitative experimental results indicate the method’s efficacy: the optimized sparse aperture decreases the number of angular sampling points by roughly 84% compared to a full acquisition, while reconstructing images with a high correlation coefficient of 0.98 to the fully sampled reference. The methodology provides an effective solution for rapid, high-performance 3D ISAR imaging, achieving an optimal balance between data acquisition efficiency and reconstruction fidelity.