Polynomial Methods in Linear Programming

Omah Jenang is one of the industries engaged in the production of traditional snacks. Currently Omah Jenang does not yet have guidelines for realizing the formation of the composition of production quantities correctly based on calculations that still use forecasting methods. Therefore Omah Jenang often experiences difficulties in providing raw materials and determining maximum profits. The purpose of this study was to de-termine the optimum yield of profits at Omah Jenang by using the simplex method linear program with the help of Lindo Software. The data used is food production data at the Omah Jenang Home Industry in 2022. The method used in this study is the Linear Pro-gramming simplex method and the Lindo Software application. The results of optimization calculations using the linear programming method and the help of Lindo Software are that the maximum profit in a month is IDR 20,000,000 in producing 800 packages of madumongso. Based on the calculation results it can be concluded that the benefits obtained by using the simplex method with the help of Lindo Software can be obtained maximum results.

In this paper, we discusses the problem that involving the conflict fuzzy multi-objective in transportation planning which is one of special case in multi-objective linear programming. To find the simultaneously optimal solution of the problem, we use the Interactive Fuzzy Multi-Objective Linear Programming (IFMOLP) method. This method can reduce the fuzzy multi-objective linear programming problem into deterministic single objective linear programming which can be solved using simplex method. Beside that , with IFMOLP method, decision maker (DM) can establish interactively the goal from the objective function to produce the pareto optimal solution so that.

В условиях рыночной экономики нефтеперерабатывающий завод (далее - НПЗ), как и всякое предприятие, стремится увеличить выручку (прибыль). Объект исследования - производство нефтепродуктов на нефтеперерабатывающем заводе. Предмет исследования - прибыль нефтеперерабатывающего завода и пути ее максимизации. Цель исследования - построить и решить экономикоматематическую модель максимизации выручки (прибыли) нефтеперерабатывающего завода. Основные методы исследования: анализ, сравнение, методы линейного программирования. Была построена задача линейного программирования и указан путь решения - симплекс-метод. Дальнейшее направление исследования - полученное решение согласовать с технологическими ограничениями в процессе производства нефтепродуктов и с параметрами спроса на конкретные нефтепродукты. In a market economy, an oil refinery (hereinafter referred to as a refinery), like any enterprise, seeks to increase revenue (profit). The object of the study is the production of petroleum products at the oil refinery. The subject of the study is the profit of the refinery and ways to maximize it. The purpose of the study is to build and solve the economic and mathematical model of maximizing the revenue (profit) of the refinery. The main research methods: analysis, comparison, linear programming methods. The linear programming problem was built and the solution path was specified - the simplex method. The further direction of the study is to coordinate the obtained decision with the technological limitations in the process of production of petroleum products and with the parameters of demand for specific petroleum products.

Secure multiparty computation is a basic concept of growing interest in modern cryptography. It allows a set of mutually distrusting parties to perform a computation on their private information in such a way that as little as possible is revealed about each private input. The early results of multiparty computation have only theoretical signi??cance since they are not able to solve computationally complex functions in a reasonable amount of time. Nowadays, e??ciency of secure multiparty computation is an important topic of cryptographic research. As a case study we apply multiparty computation to solve the problem of secure linear programming. The results enable, for example in the context of the EU-FP7 project SecureSCM, collaborative supply chain management. Collaborative supply chain management is about the optimization of the supply and demand con??guration of a supply chain. In order to optimize the total bene??t of the entire chain, parties should collaborate by pooling their sensitive data. With the focus on e??ciency we design protocols that securely solve any linear program using the simplex algorithm. The simplex algorithm is well studied and there are many variants of the simplex algorithm providing a simple and e??cient solution to solving linear programs in practice. However, the cryptographic layer on top of any variant of the simplex algorithm imposes restrictions and new complexity measures. For example, hiding the number of iterations of the simplex algorithm has the consequence that the secure implementations have a worst case number of iterations. Then, since the simplex algorithm has exponentially many iterations in the worst case, the secure implementations have exponentially many iterations in all cases. To give a basis for understanding the restrictions, we review the basic theory behind the simplex algorithm and we provide a set of cryptographic building blocks used to implement secure protocols evaluating basic variants of the simplex algorithm. We show how to balance between privacy and e??ciency; some protocols reveal data about the internal state of the simplex algorithm, such as the number of iterations, in order to improve the expected running times. For the sake of simplicity and e??ciency, the protocols are based on Shamir's secret sharing scheme. We combine and use the results from the literature on secure random number generation, secure circuit evaluation, secure comparison, and secret indexing to construct e??cient building blocks for secure simplex. The solutions for secure linear programming in this thesis can be split into two categories. On the one hand, some protocols evaluate the classical variants of the simplex algorithm in which numbers are truncated, while the other protocols evaluate the variants of the simplex algorithms in which truncation is avoided. On the other hand, the protocols can be separated by the size of the tableaus. Theoretically there is no clear winner that has both the best security properties and the best performance.

Linear programming algorithms have been widely used in Decision Support Systems. These systems have incorporated linear programming algorithms for the solution of the given problems. Yet, the special structure of each linear problem may take advantage of different linear programming algorithms or different techniques used in these algorithms. This paper proposes a web-based DSS that assists decision makers in the solution of linear programming problems with a variety of linear programming algorithms and techniques. Two linear programming algorithms have been included in the DSS: (i) revised simplex algorithm and (ii) exterior primal simplex algorithm. Furthermore, ten scaling techniques, five basis update methods and eight pivoting rules have been incorporated in the DSS. All linear programming algorithms and methods have been implemented using MATLAB and converted to Java classes using MATLAB Builder JA, while the web interface of the DSS has been designed using Java Server Pages.

The simplex method is frequently the most efficient method of solving linear programming (LP) problems. This paper reviews previous attempts to parallelise the simplex method in relation to efficient serial simplex techniques and the nature of practical LP problems. For the major challenge of solving general large sparse LP problems, there has been no parallelisation of the simplex method that offers significantly improved performance over a good serial implementation. However, there has been some success in developing parallel solvers for LPs that are dense or have particular structural properties. As an outcome of the review, this paper identifies scope for future work towards the goal of developing parallel implementations of the simplex method that are of practical value.

A penalty function method based on Kuhn–Tucker condition for solving linear bilevel programming

Chapter two - Linear programming

A multiobjective linear programming (MOLP) problem with fuzzy parameters in the constraints and objective functions in considered. Assuming fuzzy aspiration levels for the particular objectives and involving the comparison of fuzzy numbers, the problem is transformed into a multiobjective linear fractional program. For its solution an interactive method involving a linear programming procedure is proposed. This method has been developed for an application to long-term development planning of a water supply system. It has been first described in Slowinski (1986) and in this paper it is outlined and shown in the context of an updated review of recent proposals for multiobjective fuzzy linear programming.

We present a parallelization of the revised simplex method for large extensive forms of two-stage stochastic linear programming (LP) problems. These problems have been considered too large to solve with the simplex method; instead, decomposition approaches based on Benders decomposition or, more recently, interior-point methods are generally used. However, these approaches do not provide optimal basic solutions, which allow for efficient hot-starts (e.g., in a branch-and-bound context) and can provide important sensitivity information. Our approach exploits the dual block-angular structure of these problems inside the linear algebra of the revised simplex method in a manner suitable for high-performance distributed-memory clusters or supercomputers. While this paper focuses on stochastic LPs, the work is applicable to all problems with a dual block-angular structure. Our implementation is competitive in serial with highly efficient sparsity-exploiting simplex codes and achieves significant relative speed-ups when run in parallel. Additionally, very large problems with hundreds of millions of variables have been successfully solved to optimality. This is the largest-scale parallel sparsity-exploiting revised simplex implementation that has been developed to date and the first truly distributed solver. It is built on novel analysis of the linear algebra for dual block-angular LP problems when solved by using the revised simplex method and a novel parallel scheme for applying product-form updates.

In this paper we consider a linear programming problem with the underlying matrix unimodular, and the other data integer. Given arbitrary near optimum feasible solutions to the primal and the dual problems, we obtain conditions under which statements can be made about the value of certain variables in optimal vertices. Such results have applications to the problem of determining the stopping criterion in interior point methods like the primal-dual affine scaling method and the path following methods for linear programming.

Elementary Linear Programming with Applications

For many of us, modern-day linear programming (LP) started with the work of George Dantzig in 1947. However, it must be said that many other scientists have also made seminal contributions to the subject, and some would argue that the origins of LP predate Dantzig’s contribution. It is matter open to debate [36]. However, what is not open to debate is Dantzig’s key contribution to LP computation. In contrast to the economists of his time, Dantzig viewed LP not just as a qualitative tool in the analysis of economic phenomena, but as a method that could be used to compute actual answers to specific real-world problems. Consistent with that view, he proposed an algorithm for solving LPs, the simplex algorithm [12]. To this day the simplex algorithm remains a primary computational tool in linear and mixed-integer programming (MIP). In [11] it is reported that the first application of Dantzig’s simplex algorithm to the solution of a non-trivial LP was Laderman’s solution of a 21 constraint, 77 variable instance of the classical Stigler Diet Problem [41]. It is reported that the total computation time was 120 man-days! The first computer implementation of an at-least modestly general version of the simplex algorithm is reported to have been on the SEAC computer at the then National Bureau of Standards [25]. (There were apparently some slightly earlier implementations for dealing with models that were “triangular”, that is, where all the linear systems could be solved by simple addition and subtraction.) Orchard-Hays [35] reports that several small instances having as many as 10 constraints and 20 variables were solved with this implementation. The first systematic development of computer codes for the simplex algorithm began very shortly thereafter at the RAND Corporation in Santa Monica, California. Dantzig’s initial LP work occurred at the Air Force following

The problem of obtaining an optimal spline with free knots is tantamount to minimizing derivatives of a nonlinear differentiable function over a Banach space on a compact set. While the problem of data interpolation by quadratic splines has been accomplished, interpolation by splines of higher orders is far more challenging. In this paper, to overcome difficulties associated with the complexity of the interpolation problem, the interval over which data points are defined is discretized and continuous derivatives are replaced by their discrete counterparts. The l∞-norm used for maximum rth order curvature (a derivative of order r) is then linearized, and the problem to obtain a near-optimal spline becomes a linear programming (LP) problem, which is solved in polynomial time by using LP methods, e.g., by using the Simplex method implemented in modern software such as CPLEX. It is shown that, as the mesh of the discretization approaches zero, a resulting near-optimal spline approaches an optimal spline. Splines with the desired accuracy can be obtained by choosing an appropriately fine mesh of the discretization. By using cubic splines as an example, numerical results demonstrate that the linear programming (LP) formulation, resulting from the discretization of the interpolation problem, can be solved by linear solvers with high computational efficiency and the resulting spline provides a good approximation to the sought-for optimal spline.

In this paper, we propose a new model for linear fractional programming problem with absolute value functions. The major contribution of this paper is that transformation of linear fractional programming problem into separate linear programming problems with some theorems and then solution of these problems by popular algorithm. This work also used to simplex type algorithms to arrive at an optimal solution for a linear programming problem with absolute value. Moreover, we compare this method with an existing method. Numerical experiments are also given to illustrate the assertions.