Power transformer fault classification by combining genetic reduction with optimized multilayer support vector machine

To allow utilities to fulfill self-imposed and regulative performance targets the demand for new optimized tools and techniques to Estimate the performance of modern Transformers has increased. The modern power transformers has subjected to different types of faults, which affect the continuity of power supply which in turn causes serious economic losses. To avoid the interruption of power supply, various fault diagnosis approaches are adopted to detect faults in the power transformer and has to eliminate the impacts of the faults at the initial stage. Among the fault diagnosis methods, the hybrid technique of Particle Swarm Optimization (PSO) with Support Vector Machine (SVM) learning algorithm is simple conceptually derived and its implementation process is faster with better scaling properties for complex problems with non linearity and load variations but performance factor related to accuracy has a declined value in case of correlations implicit . In order to obtain better fault diagnosis to improve the service of the power transformer, SVM is optimized with Improved PSO technique to achieve high interpretation accuracy for Dissolved Gas Analysis (DGA) of power transformer through the extracting positive features from both the techniques. Primary SVM is applied to establish classification features for faults in the transformer through DGA. The features are applied as input data to Autonomous optimized Technique for faults analysis. The proposed methodology obtains the DGA data set from diagnostic gas in oil of 500 KV main transformers of Pingguo Substation in South China Electric Power Company. The simulations are carried out in MATLAB software with an Intel core 3 processor with speed of 3 GHZ and 4 GB RAM PC. The result obtained by Autonomous optimized Technique (IPSO-SVM) is compared against PSO-SVM to estimate the performance of the classifiers in terms of execution time and quality of classification for precision. The test results indicate that the Autonomous optimization of IPSO-SVM approach has significantly improved the classification accuracy and computational time for power transformer fault classification. Keywords: Transformer Fault Analysis, Improved Particle Swarm Optimization, Hybrid Optimization, Dissolved Gas Analysis, Support Vector Machine

Vis-NIR hyperspectral imaging for the classification of bacterial foodborne pathogens based on pixel-wise analysis and a novel CARS-PSO-SVM model

Support Vector Machine (SVM) has become a popular method in machine learning in recent years. SVM is widely used as a tool in many classifiction areas. The selection optimum values of the parameters (model selection) for SVM is an important step in SVM design. This paper presents the results of research and testing method Particle Swarm Optimization (PSO) in selecting the parameters for SVM. Here we focus on the selection parameter γ of the RBF function and soft margin parameter C of SVM for classification problems. In this paper we propose a Particle Swarm Optimization variation model which combine the cognition-only model with the social-only model and use randomised low discrepancy sequences for initialising particle swarms. We then evaluate the suggested strategies with a series of experiments on 6 benchmark datasets. Experimental results demonstrate the model we proposed better than grid search and full PSO-SVM model.

Tool wear is an important consideration for Computerized Numerical Control (CNC) machine tools as it directly affects machining precision. To realize the online recognition of tool wear degree, this research develops a tool wear monitoring system using an indirect measurement method which selects signal characteristics that are strongly correlated with tool wear to recognize tool wear status. The system combines support vector machine (SVM) and genetic algorithm (GA) to establish a nonlinear mapping relationship between a sample of cutting force sensor signal and tool wear level. The cutting force signal is extracted using time domain statistics, frequency domain analysis, and wavelet packet decomposition. GA is employed to select the sensitive features which have a high correlation with tool wear states. SVM is also applied to obtain the state recognition results of tool wear. The gray wolf optimization (GWO) algorithm is used to optimize the SVM parameters and to improve prediction accuracy and reduce internal parameters’ adjustment time. A milling experiment on AISI 1045 steel showed that when comparing with SVM optimized by commonly used optimization algorithms (grid search, particle swarm optimization, and GA), the proposed tool wear monitoring system can accurately reflect the degree of tool wear and achieves strong generalizability. A set of vibration signals are adopted to verify the presented research. Results show that the proposed tool wear monitoring system is robust.

Automatic recognition of skin symptom plays an importance role in the skin diagnosis and treatment. Feature selection is to increase the classification performance of skin symptom. In this paper, the effects of feature selection on the classification of 4-class skin symptoms (chloasma, blackhead, freckled and comedone) are analyzed. Support vector machine (SVM) is employed to construct classifier, the parameters setting is very crucial to the learning results and generalization ability of SVM, and many irrelevant and redundant features degrade the performance of classification, furthermore, the choice of SVM parameters is influenced by the feature subset taken into account and vice versa. So a joint optimization method for selecting features and SVM parameters is proposed. Genetic algorithms, which have a lot of improvements about fitness, crossover and mutation in comparison with simple genetic algorithms, is to achieve a balance between the classification accuracy and the size of the feature subsets selected and have a fast convergence rate. Furthermore, ‘one-against-one’ approach is used to solve multi-class classification problems and a comparison of the model performances is made among the results of the joint optimization and the single optimization of features or SVM parameters in the experiments. The simulation result shows that our approach can find subsets of features for 4-class skin symptoms classification with higher average cross validation accuracy and a higher rate of convergence compared with single optimization of features or SVM parameters.

In view of the shortcomings of traditional dissolved gas analysis technology low diagnostic veracity and low intelligence, this paper proposes to use QPSO to optimize the nuclear argument in the support vector machine (SVM), and on this basis, dissolved gas analysis (DGA) technology is used to diagnosis transformer faults. Firstly, the transformer data is preprocessed by DGA technology, and the processed data is used as the input amount of fault characteristics. Secondly, for the optimization of core parameters in SVM, the QPSO algorithm is combined with fault data for training and acquisition. Finally, five kinds of feature inputs are added to the model for training, and the trained multi-classification correlation vector machine is used to diagnose the test data. After case studies and comparative experimental analysis, the diagnostic accuracy of this method is as high as 94.74%, and relatively with SVM, PSO-SVM, and RVM methods, the accuracy is increased by 5.11%, 2.12%, and 2.12%, respectively.

The parameters of support vector machines (SVMs) such as kernel parameters and the penalty parameter have a great influence on the accuracy and complexity of the classification models. In the past, different evolutionary optimization algorithms were employed for optimizing SVMs; in this paper, we propose a social ski-driver (SSD) optimization algorithm which is inspired from different evolutionary optimization algorithms for optimizing the parameters of SVMs, with the aim of improving the classification performance. To cope with the problem of imbalanced data which is one of the challenging problems for building robust classification models, the proposed algorithm (SSD-SVM) was enhanced to deal with imbalanced data. In this study, eight standard imbalanced datasets were used for testing our proposed algorithm. For verification, the results of the SSD-SVM algorithm are compared with grid search, which is a conventional method of searching parameter values, and particle swarm optimization (PSO). The experimental results show that the SSD-SVM algorithm is capable of finding near-optimal values of SVMs parameters. The results also demonstrated high classification performance compared to the PSO algorithm.

To better prevent the potential risks in Internet-based Supply Chain Financing (SCF) products, this paper optimizes and evaluates the Internet-based SCF-oriented Credit Risk Evaluation (CRE) method. Firstly, this paper summarizes 12 risk factors of SCF business, establishes a Risk Assessment Index System (RAIS) with good consistency and stability; then, the principles of Backpropagation (BP) Neural Network (NN) is expounded together with Support Vector Machines (SVM) and Genetic Algorithm (GA) model. Consequently, a CRE model is implemented by the NN tools in MATLAB based on the collection of multiple groups of SCF-oriented risk assessment samples. Subsequently, the assessment samples are trained and tested. Finally, the SCF-oriented CRE model is proposed and verified. The results show that the BP-GA model has presented high prediction consistency with the actual classification. According to the comparison of classification results of SVM, BP model, and BP-GA model, the classification accuracy of test samples of the proposed Internet-based SCF-oriented CRE system using BP-GA model reaches 97.19%; the Type I and Type II error rate of the CRE system based on BP-GA model is 7.2% and 14.21%, respectively. Therefore, a suitable SCF-oriented CRE method is put forward for China’s commercial banks along with scientific and feasible suggestions to manage SCF-oriented credit risks more reasonably and effectively.

A genetic algorithm–support vector machine method with parameter optimization for selecting the tag SNPs

Software defect prediction could improve the reliability of software and reduce development costs. Traditional prediction models usually have a lower prediction accuracy. In order to solve this problem, a new model for software defect prediction using Particle Swarm Optimization (PSO) and Support Vector Machine (SVM) named P-SVM model is proposed in this paper, which takes advantage of non-linear computing capability of SVM and parameters optimization capability of PSO. Firstly, P-SVM model uses PSO algorithm to calculate the best parameters of SVM, and then it adopts the optimized SVM model to predict software defect. P-SVM model and other three different prediction models are used to predict the software defects in JM1 data set as an experiment, the results show that P-SVM model has a higher prediction accuracy than BP Neural Network model, SVM model, GA-SVM model.

Network traffic prediction performs a main function in characterizing network community performance. An approach which could appropriately seize the salient characteristics of the network visitors could be very useful for network analysis and simulation. Network traffic prediction methods could be divided into two classes: one is the single models and the opposite is the hybrid fashions. The hybrid models integrate the merits of several single models and consequently can enhance the network traffic prediction accuracy. In this paper, a new hybrid network traffic prediction method (EPSVM) primarily based on Empirical Mode Decomposition (EMD), Particle Swarm Optimization (PSO), and Support Vector Machines (SVM) is presented. The EPSVM first utilizes EMD to eliminate the impact of noise signals. Then, SVM is applied to model training and fitting, and the parameters of SVM are optimized by PSO. The effectiveness of the presented method is examined by evaluating it with different methods, including basic SVM (BSVM), Empirical Mode Decomposition processed by SVM (ESVM), and SVM optimized by Particle Swarm Optimization (PSVM). Case studies have demonstrated that EPSVM performed better than the other three network traffic prediction models.

An application of support vector machines in bankruptcy prediction model

Forecasting agriculture water consumption is significant to optimize confiration of water resources. In the paper, we have combined particle swarm optimization (PSO) and support vector machines (SVM) for agriculture water consumption forecasting. Compared to GA, the advantages of PSO are that PSO is easy to implement and there are few parameters to adjust. Thus, PSO is very suitable to determine training parameters of support vector machine. The experimental results demonstrate that the proposed PSOSVM model has good forecasting results in agriculture water consumption Forecasting.

Parameters of support vector machines (SVM) which is optimized by standard genetic algorithm is easy to trap into the local minimum, in order to get the optimal parameters of support vector machine, this paper proposed a parameters optimization method for support vector machines based on improved genetic algorithm, the simulation experiment is carried out on 5 benchmark datasets. The simulation show that the proposed method not only can assure the classification precision, but also can reduce training time markedly compared with standard genetic algorithm. DOI : http://dx.doi.org/10.11591/telkomnika.v12i1.3182

Feedback analysis of tunnel construction using a hybrid arithmetic based on Support Vector Machine and Particle Swarm Optimisation