Precise Orbit Determination

<p>Numerous active low Earth orbiters (LEOs) and Global Navigation Satellite System (GNSS) satellites, including the Galileo constellation, are equipped with laser retroreflectors used for Satellite Laser Ranging (SLR). Moreover, most of LEOs are equipped with GNSS receivers for precise orbit determination. SLR measurements to LEOs, GNSS, and geodetic satellites vary in terms of the number of registered normal points (NPs) or registered satellite passes. In 2016-2018, SLR measurements to LEOs constituted 81% of all NPs and 59% of all registered satellite passes, whereas 10% of NPs and 30% of satellite passes, respectively, were assigned to GNSS. The remaining SLR measurements were completed by geodetic satellites, including LAGEOS-1/2, and LARES-1.</p><p>In this study, we show that the SLR observations to Galileo, passive geodetic and active LEO satellites together with precise GNSS-based orbits of LEOs and Galileo, can be used for the determination of global geodetic parameters, such as geocenter coordinates (GCC) and Earth rotation parameters (ERPs), i.e. pole coordinates, and length-of-day parameter.</p><p>GCC are typically determined using SLR observations to passive geodetic satellites, such as LAGEOS-1/2. Also, the SLR observations to LAGEOS-1/2 together with GNSS and Very Long Baseline Interferometry data are used for the determination of ERPs. Here, we use SLR observations to Galileo, LAGEOS-1/2, LARES-1, Sentinel-3A, SWARM-A/B/C, TerraSAR-X, Jason-2, GRACE-A/B satellites to investigate whether they can be applied for the reference frame realization and for deriving high-quality global geodetic parameters.</p><p>We present various types of solutions to investigate the best solution set-up. The studied solutions differ in terms of solution lengths, the combination of different sets of satellites and the relative weights for the variance scaling factors of technique and satellite-specific normal equations. We compare our results with the standard LAGEOS-based solutions, the combined EOP-14-C04 products and show the consistency of the results.</p>

An ever increasing number of low Earth orbiting (LEO) satellites is, or will be, equipped with retro-reflectors for Satellite Laser Ranging (SLR) and on-board receivers to collect observations from Global Navigation Satellite Systems (GNSS) such as the Global Positioning Sys- tem (GPS) and the Russian GLONASS and the European Galileo systems in the future. At the Astronomical Insti- tute of the University of Bern (AIUB) LEO precise or- bit determination (POD) using either GPS or SLR data is performed for a wide range of applications for satellites at different altitudes. For this purpose the classical numeri- cal integration techniques, as also used for dynamic orbit determination of satellites at high altitudes, are extended by pseudo-stochastic orbit modeling techniques to effi- ciently cope with potential force model deficiencies for satellites at low altitudes. Accuracies of better than 2 cm may be achieved by pseudo-stochastic orbit modeling for satellites at very low altitudes such as for the GPS-based POD of the Gravity field and steady-state Ocean Circula- tion Explorer (GOCE).

GipsyX/RTGx is the Jet Propulsion Laboratory’s (JPL) next generation software package for positioning, navigation, timing, and Earth science using measurements from three geodetic techniques: Global Navigation Satellite Systems (GNSS), Satellite Laser Ranging (SLR), and Doppler Orbitography and Radiopositioning Integrated by Satellite (DORIS); with Very Long Baseline Interferometry (VLBI) under development. The software facilitates combined estimation of geodetic and geophysical parameters using a Kalman filter approach on real or simulated data in both post-processing and in real-time. The estimated parameters include station coordinates and velocities, satellite orbits and clocks, Earth orientation, ionospheric and tropospheric delays. The software is also capable of full realization of a dynamic terrestrial reference through analysis and combination of time series of ground station coordinates.Applying lessons learned from its predecessors, GIPSY-OASIS and Real Time GIPSY (RTG), GipsyX/RTGx was re-designed from the ground up to offer improved precision, accuracy, usability, and operational flexibility. We present some key aspects of its new architecture, and describe some of its major applications, including Real-time orbit determination and ephemeris predictions in the U.S. Air Force Next Generation GPS Operational Control Segment (OCX), as well as in JPL’s Global Differential GPS (GDGPS) System, supporting User Range Error (URE) of <5 cm RMS; precision post-processing GNSS orbit determination, including JPL’s contributions to the International GNSS Service (IGS) with URE in the 2 cm RMS range; Precise point positioning (PPP) with ambiguity resolution, both statically and kinematically, for geodetic applications with 2 mm horizontal, and 6.5 mm vertical repeatability for static positioning; Operational orbit and clock determination for Low Earth Orbiting (LEO) satellites, such as NASA’s Gravity Recovery and Climate Experiment (GRACE) mission with GRACE relative clock alignment at the 20 ps level; calibration of radio occultation data from LEO satellites for weather forecasting and climate studies; Satellite Laser Ranging (SLR) to GNSS and LEO satellites, DORIS-based and multi-technique orbit determination for LEO; production of terrestrial reference frames and Earth rotation parameters in support of JPL’s contribution to the International Terrestrial Reference Frame (ITRF).

ADEOS-II precise orbit determinations with GPS and SLR

The SCF_Lab (Satellite/lunar/GNSS laser ranging/altimetry and Cube/microsat Characterization Facilities Laboratory) is a brand new ISO 7 Clean Room, dedicated to design, characterization and modelling of the space segment of Satellite Laser Ranging (SLR), Lunar Laser Ranging (LLR) and Planetary Laser Ranging and Altimetry (PLRA) for industrial and scientific applications. The role of SCF_Lab is fundamental to study and characterize cube corner retroreflectors (CCRs) necessary for laser ranging. CCRs are special “mirrors” that reflect light in the same direction it came from as it was a normal flat mirror but always orthogonal to the beam no matter where the beam actually came from. It happens thanks to a triple rebound of photons, over the three faces of the corner. In SCF_Lab, thanks to an innovative thermal-vacuum-optical test (SCF-Test), we characterize and model the thermal behaviour and the optical performances of CCRs. The laboratory procedures are approved by the international organization that coordinates all laser ranging activities, the International Laser Ranging Service (ILRS). Our key experimental innovation is the concurrent measurement and modelling of the optical Far Field Diffraction Pattern (FFDP) and the temperature distribution of the SLR/LLR payload of retroreflectors under thermal conditions produced with a solar simulator. The primary target is to provide critical design and diagnostic capabilities for SLR to Galileo and other GNSS (Global Navigation Satellite System) constellations. New retroreflectors designs will be fundamental to improve GNSS orbits, increasing, this manner, accuracy, stability, and distribution of the International Terrestrial Reference Frame (ITRF), in order to provide a more precise definition of the geocenter (origin) and the scale (length unit). The SCF_Lab is also developing, validating and optimizing a next-generation LLR arrays for precision tests of GR with the MoonLIGHT-2 (Moon Laser Instrumentation for General relativity High-accuracy Tests - Phase 2) experiment.

Since the beginning of satellite altimetry missions, the ocean surface topography community requires precise and accurate satellite orbits. With start of the satellite Sentinel-3A on February 16, 2016, two radio- and one altimeter onboard the satellite accomplish the Copernicus program with a ocean- and land monitoring mission, planned for a nominal mission lifetime of 7 years. The satellite is orbiting the Earth on a polar, Sun-synchronous trajectory at an altitude of 815 km. For the purpose of precise orbit determination, the satellite is equipped with a geodetic-grade dual-frequency Global Positioning System (GPS) receiver. The GPS measurements are employed together with a set of gravitational and non-gravitational models in a Reduced-Dynamic Orbit Determination (RDOD) approach, which combines the advantages of a dynamic and a kinematic positioning for deriving precise satellite orbits. However, especially the non-gravitational force models require sophisticated modeling techniques. Therefore, a satellite macro model is introduced, which allows a proper modeling of accelerations due to Solar Radiation Pressure (SRP), Earth Radiation Pressure (ERP), and atmospheric drag. Especially the Sun-synchronous orbit, and the huge solar array, which is loosely coupled to the satellite body, makes the precise orbit determination challenging. As members of the Copernicus Quality Working Group, the Astronomical Institute of the University of Bern (AIUB), and the German Aerospace Center (DLR) are, among others, responsible for the orbit validation of Sentinel-3A. Both groups make use of a satellite macro model within a reduced-dynamic approach but differ in the employed software solutions and the pseudo-stochastic modeling. Basically, the pseudo-stochastic parameters allow to compensate potential deficits in the employed force models. Within this poster, the modeling aspects are briefly introduced, followed by comparing the results of both groups. The results include the estimated empirical accelerations, and the estimated satellite orbits of Sentinel-3A. Furthermore, the orbit quality is assessed by Satellite Laser Ranging (SLR), an external and independent tool for orbit validation.

With the implementation of the Jason-1 satellite altimeter mission, the goal of reaching the 1-cm level in orbit accuracy was set. To support the Precision Orbit Determination (POD) requirements, the Jason-1 spacecraft carries receivers for DORIS (Doppler Orbitography and Radiopositioning Integrated by Satellite) and GPS (Global Positioning System), as well as a retroreflector for SLR (Satellite Laser Ranging). The overall orbit accuracy for Jason will depend on the quality and the relative weighting of the available tracking data. In this study, the relative importance of the SLR, DORIS, and GPS tracking data is assessed along with the most effective parameterization for accounting for the unmodeled accelerations through the application of empirical accelerations. The optimal relative weighting for each type of tracking data was examined. It is demonstrated that GPS tracking alone is capable of supporting a radial orbit accuracy for Jason-1 at the 1-cm level, and that including SLR tracking provides additional benefits. It is also shown that the GRACE (Gravity Recovery and Climate Experiment) gravity model GGM01S provides a significant improvement in the orbit accuracy and reduction in the level of geographically correlated orbit errors.

The International GNSS Service (IGS) is an international activity involving more than 200 participating organisations in over 80 countries with a track record of one and a half decades of successful operations. The IGS is a service of the International Association of Geodesy (IAG). It primarily supports scientific research based on highly precise and accurate Earth observations using the technologies of Global Navigation Satellite Systems (GNSS), primarily the US Global Positioning System (GPS). The mission of the IGS is “to provide the highest-quality GNSS data and products in support of the terrestrial reference frame, Earth rotation, Earth observation and research, positioning, navigation and timing and other applications that benefit society”. The IGS will continue to support the IAG’s initiative to coordinate cross-technique global geodesy for the next decade, via the development of the Global Geodetic Observing System (GGOS), which focuses on the needs of global geodesy at the mm-level. IGS activities are fundamental to scientific disciplines related to climate, weather, sea level change, and space weather. The IGS also supports many other applications, including precise navigation, machine automation, and surveying and mapping. This article discusses the IGS Strategic Plan and future directions of the globally-coordinated ~400 station IGS network, tracking data and information products, and outlines the scope of a few of its numerous working groups and pilot projects as the world anticipates a truly multi-system GNSS in the coming decade.

Due to an increasing requirement for high accuracy orbital information for low Earth orbit (LEO) satellites, precise orbit determination (POD) of LEO satellites is a topic of growing interest. To assure the safety and reliability of the applications requiring high accuracy LEO orbits in near-real-time, integrity monitoring (IM) is an essential operation of the POD process. In this contribution, the IM strategy for LEO POD in both the kinematic and reduced-dynamic modes is investigated. The overbounding parameters of the signal-in-space range error are investigated for the GPS products provided by the International GNSS Service’s Real-Time Service and the Multi-GNSS Advanced Demonstration of Orbit and Clock Analysis service. Benefiting from the dynamic models used and the improved model strength, the test results based on the data of the LEO satellite GRACE FO-1 show that the average-case mean protection levels (PLs) can be reduced from about 3–4 m in the kinematic mode to about 1 m in the reduced-dynamic mode in the radial, along-track and cross-track directions. The overbounding mean values of the SISRE play the dominant role in the final PLs. In the reduced-dynamic mode and average-case projection, the IM availabilities reach above 99% in the radial, along-track and cross-track directions with the alert limit (AL) set to 2 m. The values are still above 98% with the AL set to 4 m, when the duty cycle of tracking is reduced to 40%, e.g., in the case of power limits for miniature satellites such as CubeSats.

Global navigation satellite systems (GNSS) products are integral to a wide array of scientific and commercial applications such as pecise orbit determination of low Earth orbit satellites, earthquake monitoring, GNSS reflectomrety, tropospheric and ionospheric research, surveying and much more. These products consisting of GNSS orbit, clock, phase biases and more are generated by the analysis centres of the International GNSS Service (IGS) by processing observations from a global network of ground stations to one or more GNSS constellations. The processing consists of a combined station position and GNSS satellite orbit determination through a least squares approach donated as global multi-GNSS processing.Within global multi-GNSS processing it is assumed that the observation noise is elevation-dependent and any spatial and temporal correlations are disregarded. Within numerous studies it has been shown that this assumption is incorrect while several studies additional pointed out that a sophisticated stochastic modelling has a positiv impact on GNSS processing and resulting products. In past reseach we have shown to exploit the post-fit residuals to derive temporal correlations for a sophisticated stochastic modeling. However, there have not been any large-scale investigations regarding the impact of stochastic modelling of observation noise on global GNSS processing products. Furthermore, to guarantee the quality of the GNSS products global multi-GNSS processing requires a sophisticated cycle slip detection and repairing algorithm. Cycle slips are discontinuities in the phase observations and if not corrected can lead to degrading quality of GNSS products. &amp;#160;&amp;#160;We present our advancements in global multi-GNSS processing by exploiting post-fit residuals for stochastic modeling and cycle slip detection. We used several years of observations and a selected IGS network of ground stations to generate GNSS products. Based on this data we analysed the impact our newly integrated approaches have on GNSS products such as orbits, clocks, phase biases and station coordinate time series. &amp;#160;

Satellite laser ranging (SLR) to the satellites of the global navigation satellite systems (GNSS) provides substantial and valuable information about the accuracy and quality of GNSS orbits and allows for the SLR-GNSS colocation in space. In the framework of the NAVSTAR-SLR experiment two GPS satellites of Block-IIA were equipped with laser retroreflector arrays (LRAs), whereas all satellites of the GLONASS system are equipped with LRAs in an operational mode. We summarize the outcome of the NAVSTAR-SLR experiment by processing 20 years of SLR observations to GPS and 12 years of SLR observations to GLONASS satellites using the reprocessedmicrowave orbits provided by the center for orbit determination in Europe (CODE). The dependency of the SLR residuals on the size, shape, and number of corner cubes in LRAs is studied. We show that the mean SLR residuals and the RMS of residuals&#13;\ndepend on the coating of the LRAs and the block or type of GNSS satellites. The SLR mean residuals are also a function of the equipment used at SLR stations including the single-photon and multi-photon detection modes.We also showthat the SLR observations to GNSS satellites are important to validate GNSS orbits and to assess deficiencies in the solar radiation pressure models. We found that the satellite signature effect, which is defined as a spread of optical pulse signals due to reflection from multiple reflectors, causes the variations of mean SLR residuals of up to 15mmbetween the observations at nadir angles of 0◦ and 14◦. in case of multiphoton SLR stations. For single-photon SLR stations this effect does not exceed 1 mm. When using the new empirical&#13;\nCODE orbit model (ECOM), the SLR mean residual falls into the range 0.1–1.8 mm for high-performing singlephoton SLR stations observing GLONASS-M satellites with uncoated corner cubes. For best-performing multi-photon stations the mean SLR residuals are between −12.2 and&#13;\n−25.6 mm due to the satellite signature effect.

The main goal of this paper is to provide a summary of our current knowledge of the ionosphere as it relates to space geodetic techniques, especially the most informative technology, global navigation satellite systems (GNSS), specifically the fully deployed and operational global positioning system (GPS). As such, the main relevant modeling points are discussed, and the corresponding results of ionospheric monitoring are related, which were mostly computed using GPS data and based on the direct experience of the authors. We address various phenomena such as horizontal and vertical ionospheric morphology in quiet conditions, traveling ionospheric disturbances, solar flares, ionospheric storms and scintillation. Finally, we also tackle the question of how improved knowledge of ionospheric conditions, especially in terms of an accurate understanding of the distribution of free electrons, can improve space geodetic techniques at different levels, such as higher-order ionospheric effects, precise GNSS navigation, single-antenna GNSS orientation and real-time GNSS meteorology.

Low Earth Orbit (LEO) constellations have recently gained tremendous attention in the navigational field due to their larger constellation size, faster geometry variations, and higher signal power levels than Global Navigation Satellite Systems (GNSS), making them favourable for Position, Navigation, and Timing (PNT) purposes. Satellite signals are heavily attenuated from the atmospheric layers, especially from the ionosphere. Ionospheric delays are, however, expected to be smaller in signals from LEO satellites than GNSS due to their lower orbital altitudes and higher carrier frequency. Nevertheless, unlike for GNSS, there are currently no standardized models for correcting the ionospheric errors in LEO signals. In this paper, we derive a new model called Interpolated and Averaged Memory Model (IAMM) starting from existing International GNSS Service (IGS) data and based on the observation that ionospheric effects repeat every 11 years. Our IAMM model can be used for ionospheric corrections for signals from any satellite constellation, including LEO. This model is constructed based on averaging multiple ionospheric data and reflecting the electron content inside the ionosphere. The IAMM model’s primary advantage is its ability to be used both online and offline without needing real-time input parameters, thus making it easy to store in a device’s memory. We compare this model with two benchmark models, the Klobuchar and International Reference Ionosphere (IRI) models, by utilizing GNSS measurement data from 24 scenarios acquired in several European countries using both professional GNSS receivers and Android smartphones. The model’s behaviour is also evaluated on LEO signals using simulated data (as measurement data based on LEO signals are still not available in the open-access community; we show a significant reduction in ionospheric delays in LEO signals compared to GNSS. Finally, we highlight the remaining open challenges toward viable ionospheric-delay models in an LEO-PNT context.

Satellite Laser Ranging (SLR) is an established technique providing very accurate position measurements of satellites in Earth orbit. However, despite decades of development, it remains a complex and expensive technology, which impedes its further growth to new applications and users. The miniSLR implements a complete SLR system within a small, transportable enclosure. Through this design, costs of ownership can be reduced significantly, and the process of establishing a new SLR site is greatly simplified. A number of novel technical solutions have been implemented to achieve a good laser ranging performance despite the small size and simplified design. Data from the initial six months of test operation have been used to generate a first estimation of the system performance. The data include measurements to many of the important SLR satellites, such as Lageos, Etalon and most of the geodetic and Earth observation missions in LEO. It is shown that the miniSLR achieves sub-centimetre accuracy, comparable with conventional SLR systems. The miniSLR is an engineering station in the International Laser Ranging Service and supplies data to the community. Continuous efforts are undertaken to further improve the system operation and stability.

Due to the continued development of the GLONASS satellites, precise orbit determination (POD) still poses a series of challenges. This study examines the impact of introducing the analytical tube-wing model for GLONASS-M and the box-wing model for GLONASS-K in a series of hybrid POD strategies that consider both the analytical model and a series of empirical parameters. We assess the perturbing accelerations acting on GLONASS spacecraft based on the analytical model. All GLONASS satellites are equipped with laser retroreflectors for satellite laser ranging (SLR). We apply the SLR observations for the GLONASS POD in a series of GNSS + SLR combined solutions. The application of the box-wing model significantly improves GLONASS orbits, especially for GLONASS-K, reducing the STD of SLR residuals from 92.6 to 27.6 mm. Although the metadata for all GLONASS-M satellites reveal similar construction characteristics, we found differences in empirical accelerations and SLR offsets not only between GLONASS-M and GLONASS-M+ but also within the GLONASS-M+ series. Moreover, we identify satellites with inferior orbit solutions and check if we can improve them using the analytical model and SLR observations. For GLONASS-M SVN730, the STD of the SLR residuals for orbits determined using the empirical solution is 48.7 mm. The STD diminishes to 41.2 and 37.8 mm when introducing the tube-wing model and SLR observations, respectively. As a result, both the application of the SLR observations and the analytical model significantly improve the orbit solution as well as reduce systematic errors affecting orbits of GLONASS satellites.