Predicting forest growth based on airborne light detection and ranging data, climate data, and a simplified process-based model

Civil engineering includes a wide range of applications that require three-dimensional (3D) information. With the advent of LiDAR (Light Detection And Ranging) technology, obtaining 3D terrain information accurately in a cost and time effective manner became more popular. In this paper, three case studies demonstrate the roles and applications of airborne LiDAR data including highway, transmission line and hydropower dam development projects. In first case study, the highway alignment was considerably changed after the initial design stage. LiDAR data was able to do the re-alignment survey quickly, allowing for prompt changes in design. In the next case study, a comparison is made between conventional transmission route alignment design and the design using PLS-CADD with LiDAR data. Utilizing the LiDAR data in PLSCADD allows transmission line engineers to model the construction costs of several alignments options effectively and efficiently compared to the conventional method. The last case study uses LiDAR for obtaining the necessary information for proposed dam. Using LiDAR data maximizes topological accuracy and volume measurements while minimizing survey time and costs. Furthermore, utilizing the multi-temporal LiDAR data can reveal valuable information such as topography changes. LiDAR survey technology has proven that it is the best method to capture accurate data from the earth surface which provides maximum density of topographical & digital imagery information for various applications.

BackgroundThe increasing availability of remotely sensed data has recently challenged the traditional way of performing forest inventories, and induced an interest in model-based inference. Like traditional design-based inference, model-based inference allows for regional estimates of totals and means, but in addition for wall-to-wall mapping of forest characteristics. Recently Light Detection and Ranging (LiDAR)-based maps of forest attributes have been developed in many countries and been well received by users due to their accurate spatial representation of forest resources. However, the correspondence between such mapping and model-based inference is seldom appreciated. In this study we applied hierarchical model-based inference to produce aboveground biomass maps as well as maps of the corresponding prediction uncertainties with the same spatial resolution. Further, an estimator of mean biomass at regional level, and its uncertainty, was developed to demonstrate how mapping and regional level assessment can be combined within the framework of model-based inference.ResultsThrough a new version of hierarchical model-based estimation, allowing models to be nonlinear, we accounted for uncertainties in both the individual tree-level biomass models and the models linking plot level biomass predictions with LiDAR metrics. In a 5005 km2 large study area in south-central Sweden the predicted aboveground biomass at the level of 18 m ×18 m map units was found to range between 9 and 447 Mg ·ha−1. The corresponding root mean square errors ranged between 10 and 162 Mg ·ha−1. For the entire study region, the mean aboveground biomass was 55 Mg ·ha−1 and the corresponding relative root mean square error 8%. At this level 75% of the mean square error was due to the uncertainty associated with tree-level models.ConclusionsThrough the proposed method it is possible to link mapping and estimation within the framework of model-based inference. Uncertainties in both tree-level biomass models and models linking plot level biomass with LiDAR data are accounted for, both for the uncertainty maps and the overall estimates. The development of hierarchical model-based inference to handle nonlinear models was an important prerequisite for the study.

Airborne light detection and ranging (LIDAR) system uses in many field such as military, agriculture, geology and transportation. LIDAR data acquisition consumes several gigabytes from the storage capacity of the system. So, it's necessary to reduce the on board storage capacity as well as its transmission rate. Compression of LIDAR data means reducing the amount of data required to represent the digital data acquired by LIDAR system. This is done by removing data redundancies to achieve compression. In this paper we explain LIDAR system theory and component, compare between lossy and lossless compression techniques then we discuss LIDAR data compression techniques in order to choose a suitable one for LIDAR system that gives high compression ratio with suitable processing time. In most LIDAR data compression techniques classification of LIDAR data is an important issue as a preprocessing step to simplify the data. Using more than one compression algorithms increase the compression ratio but increase the processing time as well.

Foresters are increasingly interested in remote sensing data because they provide an overview of landscape conditions, which is impractical with field sample data alone. Light Detection and Ranging (LiDAR) provides exceptional spatial detail of forest structure, but difficulties in processing LiDAR data have limited their application beyond the research community. Another obstacle to operational use of LiDAR data has been the high cost of data collection. Our objectives in this study were to summarize, at the stand level, both LiDAR- and Landsat (satellite)-based predictions of some common structural and volume attributes and to compare the cost of obtaining such summaries with those obtained through traditional stand exams. We found that the accuracy and cost of a LiDAR-based inventory summarized at the stand level was comparable to traditional stand exams for structural attributes. However, the LiDAR data were able to provide information across a much larger area than the stand exams alone.

Soil moisture has a pronounced effect on earth surface processes. Global soil moisture is strongly driven by climate, whereas at finer scales, the role of non‐climatic drivers becomes more important. We provide insights into the significance of soil and land surface properties in landscape‐scale soil moisture variation by utilizing high‐resolution light detection and ranging (LiDAR) data and extensive field investigations. The data consist of 1200 study plots located in a high‐latitude landscape of mountain tundra in north‐western Finland. We measured the plots three times during growing season 2016 with a hand‐held time‐domain reflectometry sensor. To model soil moisture and its temporal variation, we used four statistical modelling methods: generalized linear models, generalized additive models, boosted regression trees, and random forests. The model fit of the soil moisture models wereR2= 0.60 and root mean square error (RMSE) 8.04 VWC% on average, while the temporal variation models showed a lower fit ofR2= 0.25 and RMSE 13.11 CV%. The predictive performances for the former wereR2= 0.47 and RMSE 9.34 VWC%, and for the latterR2= 0.01 and RMSE 15.29 CV%. Results were similar across the modelling methods, demonstrating a consistent pattern. Soil moisture and its temporal variation showed strong heterogeneity over short distances; therefore, soil moisture modelling benefits from high‐resolution predictors, such as LiDAR based variables. In the soil moisture models, the strongest predictor was SAGA (System for Automated Geoscientific Analyses) wetness index (SWI), based on a 1 m2digital terrain model derived from LiDAR data, which outperformed soil predictors. Thus, our study supports the use of LiDAR based SWI in explaining fine‐scale soil moisture variation. In the temporal variation models, the strongest predictor was the field‐quantified organic layer depth variable. Our results show that spatial soil moisture predictions can be based on soil and land surface properties, yet the temporal models require further investigation. Copyright © 2017 John Wiley & Sons, Ltd.

Good forest management requires comprehensive and reliable inventory data spanning large areas. Forest management has increasingly relied on remote sensing, specifically light detection and ranging (LiDAR). However, due to the high costs associated with data collection and processing, wall-to-wall LiDAR data is rarely obtained for forests. In contrast, multispectral imagery from optical sensors often covers large extents but they fail to capture detail below the forest canopy and do not directly measure structural attributes. To take advantage of the complementary benefits of different sensors, active LiDAR and passive optical sensors have been combined and applied to problem-solving in a forestry context for over a decade. A review of the literature shows that fusion of different sensors has resulted in superior performance relative to individual sensors for classifying and delineating forest areas (up to 20 % accuracy improvement), identifying species (up to 21 % accuracy improvement), and estimating forest volume and biomass (up to 55 % accuracy improvement). In contrast, sensor fusion achieved only minor improvements for tree or forest height estimation (1–7 % accuracy improvement); this is likely because LiDAR alone is already so effective. This review was unable to draw conclusions on the performance of sensor fusion for forest age and productivity assessment due to the limited number of studies. The lack of results in these areas presents an opportunity for future research. The literature clearly demonstrates the utility of integrating LiDAR and optical data for many aspects of forest description. Perhaps the greatest challenge moving forward will be to operationalise the research such that forestry companies and governments can take advantage of the benefits of data fusion.

Airborne Light Detection and Ranging (LiDAR) topographic data provide highly accurate digital terrain information, which is used widely in applications like creating flood insurance rate maps, forest and tree studies, coastal change mapping, soil and landscape classification, 3D urban modeling, river bank management, agricultural crop studies, etc. In this paper, we focus mainly on the use of LiDAR data in terrain modeling/Digital Elevation Model (DEM) generation. Technological advancements in building LiDAR sensors have enabled highly accurate and highly dense LiDAR point clouds, which have made possible high resolution modeling of terrain surfaces. However, high density data result in massive data volumes, which pose computing issues. Computational time required for dissemination, processing and storage of these data is directly proportional to the volume of the data. We describe a novel technique based on the slope map of the terrain, which addresses the challenging problem in the area of spatial data analysis, of reducing this dense LiDAR data without sacrificing its accuracy. To the best of our knowledge, this is the first ever landscape-driven data reduction algorithm. We also perform an empirical study, which shows that there is no significant loss in accuracy for the DEM generated from a 52% reduced LiDAR dataset generated by our algorithm, compared to the DEM generated from an original, complete LiDAR dataset. For the accuracy of our statistical analysis, we perform Root Mean Square Error (RMSE) comparing all of the grid points of the original DEM to the DEM generated by reduced data, instead of comparing a few random control points. Besides, our multi-core data reduction algorithm is highly scalable. We also describe a modified parallel Inverse Distance Weighted (IDW) spatial interpolation method and show that the DEMs it generates are time-efficient and have better accuracy than the one’s generated by the traditional IDW method.

With the increasing number of remote sensing (RS) data sources, the joint utilization of multimodal data in Earth observation tasks has become a crucial research topic. As a typical representative of RS data, hyperspectral images (HSIs) provide accurate spectral information, while rich elevation information can be obtained from light detection and ranging (LiDAR) data. However, due to the significant differences in multimodal heterogeneous features, how to efficiently fuse HSI and LiDAR data remains one of the challenges faced by existing research. In addition, the edge contour information of images is not fully considered by existing methods, which can easily lead to performance bottlenecks. Thus, a joint classification network of HSI and LiDAR data based on Mamba (HLMamba) is proposed. Specifically, a gradient joint algorithm (GJA) is first performed on LiDAR data to obtain the edge contour data of the land distribution. Subsequently, a multimodal feature extraction module (MFEM) was proposed to capture the semantic features of HSI, LiDAR, and edge contour data. Then, to efficiently fuse multimodal features, a novel deep learning (DL) framework called Mamba, was introduced, and a multimodal Mamba fusion module (MMFM) was constructed. By efficiently modeling the long-distance dependencies of multimodal sequences, the MMFM can better explore the internal features of multimodal data and the interrelationships between modalities, thereby enhancing fusion performance. Finally, to validate the effectiveness of HLMamba, a series of experiments were conducted on three common HSI and LiDAR datasets. The results indicate that HLMamba has superior classification performance compared to other state-of-the-art DL methods. The source code of the proposed method will be available publicly at <uri xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">https://github.com/Dilingliao/HLMamba</uri>.

The detailed representation of the topography is an important aspect when dealing with any flood simulation model. A Digital Surface Model (DSM) with fine spatial resolution can capture topographic object boundaries with a high level of detail. Light detection and ranging (LiDAR) is a technology that can rapidly collect elevation data of a relatively large topographic area with fine spatial resolution (< 0.5m ∼1m). Information about physical objects on the DSM is critical for storm water management as the propagation of flood water is influenced by both the terrain and the objects on the terrain. The processing of LiDAR data is an important task for generating an accurate DSM suitable to running a flood simulation model. Filtering is the first step in processing LiDAR data. In the LiDAR community, the term “filtering” means the task of separating LiDAR data into ground (bare earth) and non-ground points (buildings and trees). However, the choice of appropriate filtering algorithm is crucial in order to detect micro objects such as boundary walls, fences, and thin embankments that have significant impact on the surface flow pattern. This study offers an innovative approach for developing a LiDAR filtering algorithm that is flexible in nature and able to detect not only buildings and trees but also the micro objects. The filtering algorithm is applied to two study areas, and the output suggests close correspondence to reality.

Improving classification accuracy of airborne LiDAR intensity data by geometric calibration and radiometric correction

Recent advances in light detection and ranging (LIDAR) technology have enabled the estimation of valuable canopy parameters (e.g., crown diameter, leaf area, and canopy structure) that are difficult to obtain through in situ surveys. The objective of this study was to assess the utility of LIDAR-derived measurements of crown and growth parameters to model and predict the growth of sugi (Cryptomeria japonica) stands located in the University of Tokyo Forest, Chiba Prefecture, Japan. Initially, we confirmed that crown lengths and widths of trees in stands of various densities obtained from LIDAR data correlated with those measured in situ. Then, we developed a crown growth model from repeated LIDAR measurements of stands, suggesting that LIDAR data are adequate for this purpose, and indicating that crown surface area and tree volume growth were linearly related (R2 = 0.90; p < 0.01; RMSE tree volume < 0.02 m3). The model also provided robust predictions of the volume growth of local forests in 10 × 10 m plots based on LIDAR-derived estimates of crown surface areas. Future work should test the applicability of this growth model to facilitate practical forest management.

ABSTRACTLandslides are a pervasive natural disaster, resulting in severe social, environmental and economic impacts worldwide. The tropical, mountainous landscape in South-West Mexico is predisposed to landslides because of frequent hurricanes and earthquakes. The main goal of this study is to compare landslide susceptibility maps in Guerrero derived using high-resolution LIDAR (light detection and ranging) data from both a manual landslide event inventory and an automated landslide inventorying algorithm. The paper also highlights the importance of applying LIDAR data in landslide inventorying and susceptibility mapping.We mapped landslides based on two approaches: (1) manual mapping using satellite images and (2) automatic identification of landslide morphology employing the Contour Connection Method (CCM). We produced a landslide susceptibility map by computing the probability of landslide occurrence from statistical relationships of inventoried landslides detected with LIDAR digital terrain models (DTMs) and derived landslide-causing factors using the logistic regression method.Our results suggest that the automated inventory derived through the CCM algorithm with LIDAR DTMs effectively minimizes the time-consuming and subjective manual inventorying process. The high overall prediction accuracy (up to 0.83) from logistic regression demonstrates the validity and applicability deriving reliable landslide susceptibility maps from an automated inventory; however, LIDAR data are required.

To increase understanding of forest carbon cycles and stocks, estimates of total and component (e.g. leaf, branch and trunk) biomass at a range of scales are desirable. Focusing on mixed species forests in central south‐east Queensland, two different approaches to the retrieval of biomass from small footprint Light Detection and Ranging (LiDAR) and Compact Airborne Spectrographic Imager (CASI) hyperspectral data were developed and compared. In the first, stems were located using a LiDAR crown openness index, and each was associated with crowns delineated and identified to species using CASI data. The component biomass for individual trees was then estimated using LiDAR‐derived height and stem diameter as input to species‐specific allometric equations. When summed to give total above‐ground biomass (AGB) and aggregated to the plot level, these estimates showed a reasonable correspondence with ground (plot‐based) estimates (r 2 = 0.56, RSE = 25.3 Mg ha−1, n = 21) given the complex forest being assessed. In the second approach, a Jackknife linear regression utilizing six LiDAR strata heights and crown cover at the plot‐scale produced more robust estimates of AGB that showed a closer correspondence with plot‐scale ground data (r 2 = 0.90, RSE = 11.8 Mg ha−1, n = 31). AGB aggregated from the tree‐level and Jackknife regression plot‐based AGB estimates (for 270 plots—each of 0.25 ha) compared well for more mature homogeneous and open forests. However, at the tree level, AGB was overestimated in taller forests dominated by trees with large spreading crowns, and underestimated AGB where an understorey with a high density of stems occurred. The study demonstrated options for quantifying component biomass and AGB through integration of LiDAR and CASI data but highlighted the requirement for methods that give improved estimation of tree density (by size class distributions) and species occurrence in complex forests.

Automatic building extraction is an important topic for many applications such as urban planning, disaster management, 3D building modeling and updating GIS databases. Its approaches mainly depend on two data sources: light detection and ranging (LiDAR) point cloud and aerial imagery both of which have advantages and disadvantages of their own. In this study, in order to benefit from the advantages of each data sources, LiDAR and image data combined together. And then, the building boundaries were extracted with the automated active contour algorithm implemented in MATLAB. Active contour algorithm uses initial contour positions to segment an object in the image. Initial contour positions were detected without user interaction by a series of image enhancements, band ratio and morphological operations. Four test areas with varying building and background levels of detail were selected from ISPRS’s benchmark Vaihingen and Istanbul datasets. Vegetation and shadows were removed from all the datasets by band ratio to improve segmentation quality. Subsequently, LiDAR point cloud data was converted to raster format and added to the aerial imagery as an extra band. Resulting merged image and initial contour positions were given to the active contour algorithm to extract building boundaries. In order to compare the contribution of LiDAR to the proposed method, the boundaries of the buildings were extracted from the input image before and after adding LiDAR data to the image as a layer. Finally extracted building boundaries were smoothed by the Awrangjeb (Int J Remote Sen 37(3): 551–579. https://doi.org/10.1080/01431161.2015.1131868 , 2016) boundary regularization algorithm. Correctness (Corr), completeness (Comp) and accuracy (Q) metrics were used to assess accuracy of segmented building boundaries by comparing extracted building boundaries with manually digitized building boundaries. Proposed approach shows the promising results with over 93% correctness, 92% completeness and 89% quality.

Topographical technology by Airborne LIDAR (Light Detection and Ranging) generates a precise points cloud with a density of several points per square meter, LIDAR data processing is a crucial step to be used. Extraction of 3D information in automatic way and especially in urban areas from LIDAR data is one of the most difficult problems in computer vision; it is also a necessary step for implementation of several applications that require a high level interpretation of LASER data. Therefore, there is recently an increased interest in this research field and a vast literature. The problematic discussed in this article lies in the differentiation between the sets of points that represent a specified layer of information (construction, vegetation, roads, lines, etc.). This step is called segmentation. The aim of this study is to provide a set of automatic segmentation techniques tailored to different types of 3D data and proposes a methodology to classify LIDAR data with a maximum degree of automaticity using only point cloud data.