Prediction of interface shear strength between ultra-high-performance concrete and concrete using machine learning method

Background Predicting the prognosis of patients with acute myocardial infarction (AMI) combined with diabetes mellitus (DM) is crucial due to high in-hospital mortality rates. This study aims to develop and validate a mortality risk prediction model for these patients by interpretable machine learning (ML) methods. Methods Data were sourced from the Medical Information Mart for Intensive Care IV (MIMIC-IV, version 2.2). Predictors were selected by Least absolute shrinkage and selection operator (LASSO) regression and checked for multicollinearity with Spearman’s correlation. Patients were randomly assigned to training and validation sets in an 8:2 ratio. Seven ML algorithms were used to construct models in the training set. Model performance was evaluated in the validation set using metrics such as area under the curve (AUC) with 95% confidence interval (CI), calibration curves, precision, recall, F1 score, accuracy, negative predictive value (NPV), and positive predictive value (PPV). The significance of differences in predictive performance among models was assessed utilising the permutation test, and 10-fold cross-validation further validated the model’s performance. SHapley Additive exPlanations (SHAP) and Local Interpretable Model-agnostic Explanations (LIME) were applied to interpret the models. Results The study included 2,828 patients with AMI combined with DM. Nineteen predictors were identified through LASSO regression and Spearman’s correlation. The Random Forest (RF) model was demonstrated the best performance, with an AUC of 0.823 (95% CI: 0.774–0.872), high precision (0.867), accuracy (0.873), and PPV (0.867). The RF model showed significant differences (p < 0.05) compared to the K-Nearest Neighbours and Decision Tree models. Calibration curves indicated that the RF model’s predicted risk aligned well with actual outcomes. 10-fold cross-validation confirmed the superior performance of RF model, with an average AUC of 0.828 (95% CI: 0.800–0.842). Significant Variables in RF model indicated that the top eight significant predictors were urine output, maximum anion gap, maximum urea nitrogen, age, minimum pH, maximum international normalised ratio (INR), mean respiratory rate, and mean systolic blood pressure. Conclusion This study demonstrates the potential of ML methods, particularly the RF model, in predicting in-hospital mortality risk for AMI patients with DM. The SHAP and LIME methods enhance the interpretability of ML models.

Background This study aimed to establish and validate a machine learning (ML) model for predicting in-hospital mortality in critically ill patients with chronic kidney disease (CKD). Methods This study collected data on CKD patients from 2008 to 2019 using the Medical Information Mart for Intensive Care IV. Six ML approaches were used to build the model. Accuracy and area under the curve (AUC) were used to choose the best model. In addition, the best model was interpreted using SHapley Additive exPlanations (SHAP) values. Results There were 8527 CKD patients eligible for participation; the median age was 75.1 (interquartile range: 65.0–83.5) years, and 61.7% (5259/8527) were male. We developed six ML models with clinical variables as input factors. Among the six models developed, the eXtreme Gradient Boosting (XGBoost) model had the highest AUC, at 0.860. According to the SHAP values, the sequential organ failure assessment score, urine output, respiratory rate, and simplified acute physiology score II were the four most influential variables in the XGBoost model. Conclusions In conclusion, we successfully developed and validated ML models for predicting mortality in critically ill patients with CKD. Among all ML models, the XGBoost model is the most effective ML model that can help clinicians accurately manage and implement early interventions, which may reduce mortality in critically ill CKD patients with a high risk of death.

To identify factors affecting and key environmental factors of the Oncomelania hupensis snail density in the Yangtze River Delta region using machine learning methods. Administrative village-level O. hupensis snail survey data in the Yangtze River Delta (including Shanghai Municipality, Jiangsu Province, Zhejiang Province and Anhui Province) from 2011 to 2021 were retrieved from the Information Management System for Parasitic Disease Control of Chinese Center for Disease Control and Prevention. Environmental factor data were captured from the Google Earth Engine platform, including elevation, slope, terrain, normalized difference vegetation index (NDVI), vegetation type, soil type, total petroleum hydrocarbon (TPH), ammonium nitrogen, inorganic nitrogen, dissolved oxygen, pH of water, chemical oxygen demand (COD) and inorganic phosphorus, and climatic factor data in the study region were retrieved from the Copernicus Climate Data Store, including annual precipitation, aridity index and annual mean temperature (AMT). O. hupensis snail survey data in the Yangtze River Delta region from 2011 to 2021 were randomly divided into a training set (70%) and a test set (30%), and five machine learning models were selected for machine learning model construction and comparative analysis of the O. hupensis snail density using the software R 4.3.0, including random forest (RF), eXtreme gradient boosting (XGBoost), support vector machine (SVM), gradient boosting machine (GBM) and neural network (NN). The XGBoost model was employed to construct a predictive model for the O. hupensis snail density, and the impact of each environmental factor on O. hupensis snail distribution was quantified. The SHapley Additive exPlanations (SHAPs) values were calculated to estimate the average contribution of each variable to the model prediction, and the core environmental factors affecting the O. hupensis snail population density were screened. Among the five machine learning models, the XGBoost model exhibited the optimal comprehensive performance, with the coefficient of determination (R2) of 0.855, mean squared error (MSE) of 0.188, root mean squared error (RMSE) of 0.434 and mean absolute error (MAE) of 0.155, respectively. Analysis of factors affecting the O. hupensis snail density with the XGBoost model showed that among the 16 environmental factors, the top four high-impact factors ranked by SHAPs values included annual precipitation, elevation, aridity index and NDVI, with cumulative SHAPs contributions of 75%, which was higher than that of other environmental factors. If NDVI was higher than 0.6, the O. hupensis snail density increased with NDVI and peaked if NDVI was 0.8 (1.60 snails/0.1 m2). The O. hupensis snail density increased with elevation if the elevation ranged from 14 to 40 m, and slowly rose if the annual precipitation ranged from 900 to 1 300 mm, and then increased rapidly to the peak (1.52 snails/0.1 m2) if the annual precipitation ranged from 1 300 to 1 500 mm. In addition, the O. hupensis snail density increased rapidly to the maximum (1.60 snails/0.1 m2) if the aridity index ranged from 0.8 to 1.1, and decreased gradually if the aridity index exceeded 1.1. The XGBoost model shows excellent performance in prediction of the O. hupensis snail density and identification of key environmental factors in the Yangtze River Delta region. Annual precipitation, elevation, aridity index and NDVI are key environmental factors affecting the distribution and density of O. hupensis snails in the Yangtze River Delta region.

Chronic pain around the temporomandibular joint (TMJ) and masticatory muscles is a primary symptom of temporomandibular disorders (TMD). However, the clinical significance of magnetic resonance imaging (MRI) features in predicting TMD-related pain remains unclear. This study aimed to develop and interpret machine learning (ML) models based on MRI characteristics for predicting pain severity in patients with TMD. The present retrospective study included 584 patients with TMD between January 2022 and December 2024, yielding a total of 755 TMJ MRI data sets. Pain severity was classified using the visual analogue scale (VAS). Demographic variables (age, sex) and MRI features-including lesion side, disc position, disc morphology, disc signal, disc perforation, bilaminar zone tear, joint space, joint effusion, condylar movement, bony changes and morphology/signal of the lateral pterygoid muscle-were collected. Eleven ML models based on demographic and MRI features were developed: logistic regression (LR), support vector machine (SVM), random forest (RF), extreme gradient boosting (XGBoost), light gradient boosting machine (LightGBM), adaptive boosting (AdaBoost), gradient boosting classifier (GBC), bagging classifier (BC), extremely randomised trees (ETC), decision tree classifier (DTC) and multilayer perceptron (MLP). Model performance was evaluated using multiple metrics, including the area under the receiver operating characteristic curve (AUC), accuracy, sensitivity, specificity and F1 score. Precision-recall (PR) curves and calibration curves were plotted to assess discrimination and model calibration. Decision curve analysis (DCA) was conducted to evaluate the clinical net benefit across a range of threshold probabilities. Model interpretability was enhanced using Shapley Additive Explanations (SHAP), which quantified the contribution of each feature to individual predictions. Feature selection was conducted based on mean SHAP values, and separate LightGBM models were constructed using the Top 3, 5, and 9 most important features, as well as the full-feature set, for performance comparison. The data set was randomly divided into a training set (n = 604) and a test set (n = 151). Among the 11 ML models, the LightGBM model demonstrated the best predictive performance, with an AUC of 0.899, and was therefore identified as the optimal model. SHAP analysis identified age, disc position and condylar movement as the top three contributing features. Feature selection analysis indicated that selecting the top nine SHAP-ranked variables led to the highest diagnostic performance, with an AUC of 0.829. This study developed an interpretable, high-performing MRI-based ML model incorporating SHAP analysis to integrate imaging and clinical features for objective pain assessment, which may help identify high-risk TMD patients and guide personalised treatment strategies.

Development and validation of interpretable machine learning model for pre-treatment predicting the response to targeted and immune therapy in hepatocellular carcinoma.

Integrating data imputation and augmentation with interpretable machine learning for efficient strength prediction of fly ash-based alkali-activated concretes

Optimized machine learning models for predicting crown convergence of plateau mountain tunnels

Air pollution in Macau has become a serious problem following the Pearl River Delta’s (PRD) rapid industrialization that began in the 1990s. With this in mind, Macau needs an air quality forecast system that accurately predicts pollutant concentration during the occurrence of pollution episodes to warn the public ahead of time. Five different state-of-the-art machine learning (ML) algorithms were applied to create predictive models to forecast PM2.5, PM10, and CO concentrations for the next 24 and 48 h, which included artificial neural networks (ANN), random forest (RF), extreme gradient boosting (XGBoost), support vector machine (SVM), and multiple linear regression (MLR), to determine the best ML algorithms for the respective pollutants and time scale. The diurnal measurements of air quality data in Macau from 2016 to 2021 were obtained for this work. The 2020 and 2021 datasets were used for model testing, while the four-year data before 2020 and 2021 were used to build and train the ML models. Results show that the ANN, RF, XGBoost, SVM, and MLR models were able to provide good performance in building up a 24-h forecast with a higher coefficient of determination (R2) and lower root mean square error (RMSE), mean absolute error (MAE), and biases (BIAS). Meanwhile, all the ML models in the 48-h forecasting performance were satisfactory enough to be accepted as a two-day continuous forecast even if the R2 value was lower than the 24-h forecast. The 48-h forecasting model could be further improved by proper feature selection based on the 24-h dataset, using the Shapley Additive Explanations (SHAP) value test and the adjusted R2 value of the 48-h forecasting model. In conclusion, the above five ML algorithms were able to successfully forecast the 24 and 48 h of pollutant concentration in Macau, with the RF and SVM models performing the best in the prediction of PM2.5 and PM10, and CO in both 24 and 48-h forecasts.

This study focuses on using various machine learning (ML) models to evaluate the shear behaviors of ultra-high-performance concrete (UHPC) beams reinforced with glass fiber-reinforced polymer (GFRP) bars. The main objective of the study is to predict the shear strength of UHPC beams reinforced with GFRP bars using ML models. We use four different ML models: support vector machine (SVM), artificial neural network (ANN), random forest (R.F.), and extreme gradient boosting (XGBoost). The experimental database used in the study is acquired from various literature sources and comprises 54 test observations with 11 input features. These input features are likely parameters related to the composition, geometry, and properties of the UHPC beams and GFRP bars. To ensure the ML models' generalizability and scalability, random search methods are utilized to tune the hyperparameters of the algorithms. This tuning process helps improve the performance of the models when predicting the shear strength. The study uses the ACI318M-14 and Eurocode 2 standard building codes to predict the shear capacity behavior of GFRP bars-reinforced UHPC I-shaped beams. The ML models' predictions are compared to the results obtained from these building code standards. According to the findings, the XGBoost model demonstrates the highest predictive test performance among the investigated ML models. The study employs the SHAP (SHapley Additive exPlanations) analysis to assess the significance of each input parameter in the ML models' predictive capabilities. A Taylor diagram is used to statistically compare the accuracy of the ML models. This study concludes that ML models, particularly XGBoost, can effectively predict the shear capacity behavior of GFRP bars-reinforced UHPC I-shaped beams.

The number of deaths from cardiovascular disease is projected to reach 23.3 million by 2030. As a contribution to preventing this phenomenon, this paper proposed a machine learning (ML) model to predict patients with arteriosclerotic heart disease (AHD). We also interpreted the prediction model results based on the ML approach and deployed modelagnostic ML methods to identify informative features and their interpretations. We used a hematology Electronic Health Record (EHR) with information on erythrocytes, hematocrit, hemoglobin, mean corpuscular hemoglobin, mean corpuscular hemoglobin concentration, leukocytes, thrombocytes, age, and sex. To detect and predict AHD, we explored random forest (RF), XGBoost, and AdaBoost models. We examined the prediction model results based on the confusion matrix and accuracy measures. We used the Shapley Additive exPlanations (SHAP) framework to interpret the ML model and quantify the contribution of features to predictions. Our study included data from 6,837 patients, with 4,702 records from patients diagnosed with AHD and 2,135 records from patients without an AHD diagnosis. AdaBoost outperformed RF and XGBoost, achieving an accuracy of 0.78, precision of 0.82, F1-score of 0.85, and recall of 0.88. According to the SHAP summary bar plot method, hemoglobin was the most important attribute for detecting and predicting AHD patients. The SHAP local interpretability bar plot revealed that hemoglobin and mean corpuscular hemoglobin concentration had positive impacts on AHD prediction based on a single observation. ML models based on real clinical data can be used to predict AHD.

Rapid epicentral distance estimation is of great significance for earthquake early warning (EEW). To rapidly and reliably predict epicentral distance, we developed machine learning models with multiple feature inputs for epicentral distance estimation using a single station and explored the feasibility of three machine learning methods, namely, Random Forest, eXtreme Gradient Boosting, and Support Vector Machine, for epicentral distance estimation. We used strong-motion data recorded by the Japanese Kyoshin network within a range of 1° (∼112 km) from the epicenter to train machine learning models. We used 30 features extracted from the P-wave signal as inputs to the machine learning models and the epicentral distance as the prediction target of the models. For the same test data set, within 0.1–5 s after the P-wave arrival, the epicentral distance estimation results of these three machine learning models were similar. Furthermore, these three machine learning methods can obtain smaller mean absolute errors and root mean square errors, as well as larger coefficients of determination (R2), for epicentral distance estimation than traditional EEW epicentral distance estimation methods, indicating that these three machine learning models can effectively improve the accuracy of epicentral distance estimation to a certain extent. In addition, we analyzed the importance of different features as inputs to machine learning models using SHapley additive exPlanations. We found that using the top 15 important features as inputs, these three machine learning models can also achieve good results for epicentral distance estimation. Based on our results, we inferred that the machine learning models for estimating epicentral distance proposed in this study are meaningful in EEW.

Background: Hip fractures are common in the elderly and often require ICU admission post-surgery due to high ASA scores and comorbidities. Length of hospital stay after ICU is a crucial indicator affecting patient recovery, complication rates, and healthcare costs. This study aimed to develop and validate a machine learning-based model to predict the factors associated with extended hospital stay (>7 days from surgery to discharge) in hip fracture patients requiring postoperative ICU care. The findings could help clinicians optimize ICU bed utilization and improve patient management strategies. Methods: In this retrospective single-centre cohort study conducted in a tertiary ICU in Turkey (2017–2024), 366 ICU-admitted hip fracture patients were analysed. Conventional statistical analyses were performed using SPSS 29, including Mann–Whitney U and chi-squared tests. To identify independent predictors associated with extended hospital stay, Least Absolute Shrinkage and Selection Operator (LASSO) regression was applied for variable selection, followed by multivariate binary logistic regression analysis. In addition, machine learning models (binary logistic regression, random forest (RF), extreme gradient boosting (XGBoost) and decision tree (DT)) were trained to predict the likelihood of extended hospital stay, defined as the total number of days from the date of surgery until hospital discharge, including both ICU and subsequent ward stay. Model performance was evaluated using AUROC, F1 score, accuracy, precision, recall, and Brier score. SHAP (SHapley Additive exPlanations) values were used to interpret feature contributions in the XGBoost model. Results: The XGBoost model showed the best performance, except for precision. The XGBoost model gave an AUROC of 0.80, precision of 0.67, recall of 0.92, F1 score of 0.78, accuracy of 0.71 and Brier score of 0.18. According to SHAP analysis, time from fracture to surgery, hypoalbuminaemia and ASA score were the variables that most affected the length of stay of hospitalisation. Conclusions: The developed machine learning model successfully classified hip fracture patients into short and extended hospital stay groups following postoperative intensive care. This classification model has the potential to aid in patient flow management, resource allocation, and clinical decision support. External validation will further strengthen its applicability across different settings.

Institutional delivery dropout (IDD), defined as delivery outside a health facility despite attending antenatal care (ANC), remains a significant barrier to reducing maternal mortality in Nigeria. Traditional statistical models often fall short of capturing the complex, non-linear interactions among the socio-demographic factors that drive this critical health behavior. Using a comprehensive dataset of 16,100 women from the 2018 Nigeria Demographic and Health Survey (NDHS), we applied and compared seven diverse machine learning (ML) algorithms, including models such as Support Vector Machine (SVM), Gradient Boosting (GB), and Extreme Gradient Boosting (XGBoost). The model performance was systematically evaluated using metrics such as accuracy, Area Under the Receiver Operating Characteristic curve (AUROC), F1-score, and detailed confusion matrices. Furthermore, SHapley Additive explanations (SHAP) were used to provide transparent interpretations of feature importance and predictive contributions. Gradient Boosting was the best-performing model, achieving the highest F1-score (0.755) and AUROC (0.82). SVM achieved the highest accuracy (0.740) and recall (0.780). SHAP identified education level, household wealth, and religion as strong predictors of IDD. The performance metrics reported with confidence intervals showed modest variability across the models. Machine learning approaches were effective in identifying women at an increased risk of institutional delivery dropout. SHAP analysis provides insights into the key sociodemographic predictors of IDD, highlighting the value of interpretable ML methods in maternal health research.

Objective Motorcycle crashes often result in severe injuries on roads that affect people’s lives physically, financially, and psychologically. These injuries could be notably harmful to drivers of all age groups. The main objective of this study is to investigate the risk factors contributing to the severity of crash injuries in different age groups. Methods This Objective is achieved by developing accurate machine learning (ML) based prediction models. This research examines the relationship between potential risk factors of motorcycle-associated crashes using (ML) and Shapley Additive explanations (SHAP) technique. The SHAP technique further helped interpreting ML methods for traffic injury severity prediction. It indicates the significant non-linear interactions between dependent and independent variables. The data for this study was collected from the Provincial Emergency Response Service RESCUE 1122 for the Rawalpindi region (Pakistan) over three years (from 2017 to 2020). The Synthetic Minority Oversampling Technique (SMOTE) is employed to balance injury severity classes in the pre-processing phase. Results The results demonstrate that age, gender, posted speed limit, the number of lanes, and month of the year are positively associated with severe and fatal injuries. This research also assesses how the modeling framework varies between the ML and classical statistical methods. The predictive performance of proposed ML models was assessed using several evaluation metrics, and it is found that Catboost outperformed the XGBoost, Random Forest (RF) and Multinomial Logit (MNL) model. Conclusion The findings of this study will assist road users, road safety authorities, stakeholders, policymakers, and decision-makers in obtaining substantial and essential guidance for reducing the severity of crash injuries in Pakistan and other countries with prevailing conditions.

A long-standing problem at the frontier of biomechanical studies is to develop fast methods capable of estimating material properties from clinical data. In this paper, we have studied three surrogate models based on machine learning (ML) methods for fast parameter estimation of left ventricular (LV) myocardium. We use three ML methods named K-nearest neighbour (KNN), XGBoost and multi-layer perceptron (MLP) to emulate the relationships between pressure and volume strains during the diastolic filling. Firstly, to train the surrogate models, a forward finite-element simulator of LV diastolic filling is used. Then the training data are projected in a low-dimensional parametrized space. Next, three ML models are trained to learn the relationships of pressure–volume and pressure–strain. Finally, an inverse parameter estimation problem is formulated by using those trained surrogate models. Our results show that the three ML models can learn the relationships of pressure–volume and pressure–strain very well, and the parameter inference using the surrogate models can be carried out in minutes. Estimated parameters from both the XGBoost and MLP models have much less uncertainties compared with the KNN model. Our results further suggest that the XGBoost model is better for predicting the LV diastolic dynamics and estimating passive parameters than other two surrogate models. Further studies are warranted to investigate how XGBoost can be used for emulating cardiac pump function in a multi-physics and multi-scale framework.