Prediction of vertical pile capacity of driven pile in cohesionless soil using artificial intelligence techniques

Chapter 16 - Modeling the Axial Capacity of Bored Piles Using Multi-Objective Feature Selection, Functional Network and Multivariate Adaptive Regression Spline

This chapter provides a description of how to use PROC ADAPTIVEREG for generating multivariate adaptive regression splines (MARS) models for univariate continuous and dichotomous outcomes as well as how to evaluate and compare MARS models with likelihood cross-validation (LCV) scores. Comparison of MARS models to adaptive fractional polynomial models on the basis of LCV scores is also covered as well as how to adaptively transform MARS models. Example code is provided for generating models for predicting the univariate continuous outcome death rate per 100,000 in terms of available predictors as also addressed in Chaps 2, 3, 16, and 17 as well as models for predicting the univariate dichotomous outcome a high mercury level in fish over 1.0 ppm versus a lower level in terms of available predictors as also addressed in Chaps 8, 9, 16 and 17.

Surface longwave net radiation (LWNR) is a vital component in the surface radiation budget. Major progress has been made in the estimations of clear-sky LWNR. However, the estimation of cloudy-sky LWNR remains a significant challenge. In this paper, a linear model (LM) and a multivariate adaptive regression spline (MARS) model were developed to estimate the cloudy-sky LWNR from a satellite-derived surface shortwave net radiation product. Spatially and temporally matched satellite data and ground-measured LWNR, which was collected at 24 sites from four networks, were used to build and validate the linear and MARS models. The effects of land cover, climate type, and surface elevation on the estimate of LWNR were also analyzed. The MARS model, incorporating the normalized difference vegetation index (NDVI) and surface elevation (H) as the inputs, had the best performance. The determination coefficient, BIAS, and root mean square error (RMSE) were 0.51, 0.01 W/m2, and 26.10 W/m2, respectively. The developed model, when combined with freely distributed Global LAnd Surface Satellite (GLASS) products, showed promise for producing surface LWNR and all-sky surface net radiation.

This study predicts the strength of rotary brace damper by analyzing a new set of probabilistic models using the usual method of multiple linear regressions (MLR) and advanced machine-learning methods of multivariate adaptive regression splines (MARS), Rotary brace damper can be easily assembled with high energy-dissipation capability. To investigate the behavior of this damper in structures, a steel frame is modeled with this device subjected to monotonic and cyclic loading. Several response parameters are considered, and the performance of damper in reducing each response is evaluated. MLR and MARS methods were used to predict the strength of this damper. Displacement was determined to be the most effective parameter of damper strength, whereas the thickness did not exhibit any effect. Adding thickness parameter as inputs to MARS and MLR models did not increase the accuracies of the models in predicting the strength of this damper. The MARS model with a root mean square error (RMSE) of 0.127 and mean absolute error (MAE) of 0.090 performed better than the MLR model with an RMSE of 0.221 and MAE of 0.181.

Analyzing angle crashes at unsignalized intersections using machine learning techniques

The current study investigates an improved version of Least Square Support Vector Machines integrated with a Bat Algorithm (LSSVM-BA) for modeling the dissolved oxygen (DO) concentration in rivers. The LSSVM-BA model results are compared with those obtained using M5 Tree and Multivariate Adaptive Regression Spline (MARS) models to show the efficacy of this novel integrated model. The river water quality data at three monitoring stations located in the USA are considered for the simulation of DO concentration. Eight input combinations of four water quality parameters, namely, water temperature, discharge, pH, and specific conductance, are used to simulate the DO concentration. The results revealed the superiority of the LSSVM-BA model over the M5 Tree and MARS models in the prediction of river DO. The accuracy of the LSSVM-BA model compared with those of the M5 Tree and MARS models is found to increase by 20% and 42%, respectively, in terms of the root-mean-square error. All the predictive models are found to perform best when all the four water quality variables are used as input, which indicates that it is possible to supply more information to the predictive model by way of incorporation of all the water quality variables.

The precise forecasting of daily solar radiation (DSR) is receiving prominent attention among thriving solar energy studies. In this study, three standalone models, including gene expression programing (GEP), multivariate adaptive regression splines (MARS), and self-adaptive MARS (SaMARS), were evaluated to forecast DSR. A SaMARS model was classified as MARS model when using the crow search algorithm (CSA). In addition, to overcome the limitations of the standalone models, the complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) was employed to enhance the accuracy of DSR forecasting. Therefore, three hybrid models including CEEMDAN-GEP, CEEMDAN-MARS, and CEEMDAN-SaMARS were proposed to forecast DSR in Busan and Incheon stations in South Korea. The performance of proposed models were evaluated and affirmed that the accuracy of the CEEMDAN-SaMARS model (NSE = 0.878–0.883) outperformed CEEMDAN-MARS (NSE = 0.819–0.818), CEEMDAN-GEP (NSE = 0.873–0.789), SaMARS (NSE = 0.846–0.769), MARS (NSE = 0.819–0.758), and GEP (NSE = 0.814–0.755) models at both stations. Therefore, it can be concluded that the optimized CEEMDAN-SaMARS model significantly enhanced the accuracy of DSR forecasting compared to that of standalone models.

Application of least square support vector machine and multivariate adaptive regression spline models in long term prediction of river water pollution

Application of Multivariate Adaptive Regression Splines (MARS) approach in prediction of compressive strength of eco-friendly concrete

Driven pile is widely used as an effective and convenient structural component to transfer superstructure loads to deep stiffer soils. Nevertheless, during the design process of piles, due to the intrinsic complexity as well as various design variables, the internal stress state related to pile drivability remains unclear, which makes the analysis imprecise. Thus, the development of an accurate predictive model becomes emergent. This paper presents a practical approach to assess pile drivability in relation to the prediction of Maximum compressive stresses and Blow per foot using a series of machine learning algorithms. A database of more than 4000 piles is employed to construct random forest regression (RFR) and multivariate adaptive regression splines (MARS) models. The 10-fold cross-validation method and Lasso regularisation are adapted to obtain the model of superior generalisation ability and better persuasive results. Lastly, the results of RFR and MARS models were compared and evaluated in accordance with the goodness of fit, running time and interpretability. The results show that the RFR model performs better than the MARS in terms of fitting and operational efficiency, but is short of interpretability.

Background: Myocardial perfusion scintigraphy (MPS) is an important tool for evaluating ischemia in diabetic populations. However, applications of advanced predictive models like multivariate adaptive regression splines (MARS) to estimate summed stress scores (SSS) are lacking. Methods: In this study, 1028 diabetic women undergoing Thallium-201 MPS were analyzed. The dataset was split into training (80%) and testing (20%) subsets. MARS and multiple linear regression (MLR) models were constructed to predict SSS, and their performance was evaluated using root mean square error (RMSE), relative absolute error (RAE), root relative squared error (RRSE), Mean Absolute Percentage Error (MAPE), and Symmetric Mean Absolute Percentage Error (SMAPE). Results: On the testing dataset, the MARS model outperformed the MLR model across all metrics, with an RMSE of 3.25 compared to 3.89 for MLR, an RAE of 0.52 vs. 0.64, and an RRSE of 0.53 vs. 0.67. Similar trends were observed in MAPE (18.7% vs. 22.1%) and SMAPE (17.3% vs. 20.5%). Conclusions: The superior predictive accuracy of the MARS model suggests its potential to enhance non-invasive myocardial risk stratification in diabetic women.

Multivariate adaptive regression splines (MARS) in chromatographic quantitative structure–retention relationship studies

This study aims to build an artificial intelligence (AI)-based inference model to predict the coefficient of performance (COP) for refrigeration equipment under various R404A refrigerant conditions. The proposed model, the evolutionary multivariate adaptive regression splines (EMARS), is a hybrid of the multivariate adaptive regression splines (MARS) and the artificial bee colony (ABC). In the EMARS, the MARS primarily addresses the learning and curve fitting and the ABC carries out optimization to determine the fittest parameter settings with minimal prediction error. A tenfold cross-validation method was used to compare the performance of the EMARS against four other AI techniques, including the back-propagation neural network, classification and regression tree, genetic programming, and support vector machine. An analysis of comparison results supports EMARS as the best model for predicting the COP, with an MAPE value $$<$$<1%. In addition to performing significantly better than the four benchmark models, EMARS is unique in being able to: operate automatically without human intervention or domain knowledge; explore the approximate function of the input---output relationship; and identify the relative importance of various factors of influence automatically.

Axisymmetric solutions for the bearing capacity of ring foundation resting on anisotropic and heterogenous clays are presented in this paper using finite element analysis (FEA). The NGI-ADP model in PLAXIS FEA, a widely used anisotropic soil model, is adopted to study the stability responses of ring foundations, with special consideration given to the effects of increasing undrained shear strength with the depth. Numerical results are formulated in terms of a dimensionless stability number (bearing capacity ratio) that is a function of three dimensionless input parameters: namely, the ratio of inner and outer radius, the increasing strength gradient ratio, and the anisotropic shear strength ratio. The influence of each dimensionless input parameter on the bearing capacity ratio is investigated using design charts and failure mechanisms, and they are scored by relative importance indexes in multivariate adaptive regression splines (MARS) model—a machine learning approach. A highly accurate equation generated from the MARS model is proposed as an effective tool for engineering practitioners.

Forecast Bankruptcy Using a Blend of Clustering and MARS Model - Case of US Banks