PrismatoidPatNet54: An Accurate ECG Signal Classification Model Using Prismatoid Pattern-Based Learning Architecture

The 3D Discrete Wavelet Transform (DWT) and Support Vector Machine (SVM) are used in this study to analyze and characterize Electrocardiogram (ECG) signals. This technique consists of three stages: ECG signal preprocessing, feature extraction, and ECG signal order. The 3D wavelet transform is a signal preprocessing technique, de-noising, along with wavelet coefficient extraction.•SVM is used to categorize the ECG through each of the nine heartbeat types recognized by the various classifiers. For this work, around 6400 ECG beats were looked at over the China Physiological Signal Challenge (CPSC) 2018 arrhythmia dataset.•The best degree of exactness was acquired when level 4 rough constants with Symlet-8 (Sym8) channel were utilized for arrangement. Utilizing the ECG signals from CPSC 2018 data set, the SVM classifier has a normal precision of 99.02%, which is much better than complex support vector machine (CSVM) 98.5%, and weighted support vector machine (WSVM) 99%.•The suggested approach is far superior to others in terms of accuracy, and classification of several diseases of arrhythmia.

Children with autism spectrum disorder (ASD) are deficit in communication, social skills, empathy, emotional responsiveness and have significant behavioral pattern. They have difficulty in understanding other feelings and their own emotions. This leads to the sudden emotional outburst and aggressive behavior in these children. Parents, caretakers and doctors find it very difficult to prevent such extreme behaviors. Learning the positive and negative valence leads in determining the early indications before the onset of emotional outbursts in children with ASD. The present study measures the psycho physiological electrocardiogram (ECG) signal from the typically developed (TD) children and children with ASD in the age group of 5–11 years. Personalized protocol was developed for every child with ASD to induce positive and negative valence and ECG data was collected using wearable Shimmer ECG device. The heart rate variability (HRV) and the QRS amplitude were derived from ECG signal using Pan–Tompkins algorithm and eleven features were extracted using DWT (db2, db4 and db8) mother wavelet. The significant features of ECG, HRV and QRS amplitude were classified using the K nearest neighbor (KNN), support vector machine (SVM) and ensemble classifier. Ensemble and KNN classifier achieved maximum accuracy of 81% and 76.2% for children with ASD and Ensemble and SVM classifiers obtained maximum accuracy of 87.4% and 83.8% for TD children using HRV data.

Automated accurate fire detection system using ensemble pretrained residual network

Effective and powerful methods for denoising real electrocardiogram (ECG) signals are important for wearable sensors and devices. Deep Learning (DL) models have been used extensively in image processing and other domains with great success but only very recently have been used in processing ECG signals. This paper presents several DL models namely Convolutional Neural Networks (CNNs), Long Short-Term Memory (LSTM), Restricted Boltzmann Machine (RBM) together with the more conventional filtering methods (low pass filtering, high pass filtering, Notch filtering) and the standard wavelet-based technique for denoising EEG signals. These methods are trained, tested and evaluated on different synthetic and real ECG datasets taken from the MIT PhysioNet database and for different simulation conditions (i.e. various lengths of the ECG signals, single or multiple records). The results show the CNN model is a performant model that can be used for off-line denoising ECG applications where it is satisfactory to train on a clean part of an ECG signal from an ECG record, and then to test on the same ECG signal, which would have some high level of noise added to it. However, for real-time applications or near-real time applications, this task becomes more cumbersome, as the clean part of an ECG signal is very probable to be very limited in size. Therefore the solution put forth in this work is to train a CNN model on 1 second ECG noisy artificial multiple heartbeat data (i.e. ECG at effort), which was generated in a first instance based on few sequences of real signal heartbeat ECG data (i.e. ECG at rest). Afterwards it would be possible to use the trained CNN model in real life situations to denoise the ECG signal.

Present paper deals with design and development of digital FIR filters. Heart diseases, which are one of the death reasons, are among the several serious problems in this century and as per the latest survey, 60% of the patients die due to Heart diseases. Electrocardiogram (ECG) signal plays a vital role in the monitoring and diagnosis of the health conditions of human heart. The basic ECG signal has the frequency range from .5Hz to 100Hz. The most significant noises that corrupt ECG signal are power line interference and baseline wanders. It becomes difficult for the Specialist to diagnose the diseases if artifacts are present in the ECG signal. Designing digital filters to reduce these noises is very important in ECG signal processing. In this work a digital FIR filter for reducing 50Hz power line noise in ECG signal is designed and implemented with different windowing methods as of Hamming, Kaiser, and Chebyshev. The work has been done in MATLAB environment. The result obtained for all FIR filters are compared by comparing the waveforms of the original and filtered ECG signals. The filter which gives the best results is the one using Chebyshev Window.

Electrocardiogram (ECG) signal shows the different electrical activities of the heart. Since manual analysis is tedious and time-consuming, an offline automated ECG analysis and classification scheme is proposed in this study. Using Discrete Wavelet Transform (DWT) as feature extraction, this comparative study focused on ECG classification between Adaptive Neuro-Fuzzy Inference System (ANFIS) and Support Vector Machine (SVM). It aims to classify normal and abnormal heartbeats with the addition of non-ECG signals. Abnormal heartbeats include ECG signals with atrial fibrillation and ventricular tachycardia. The ECG signals that were used as basis in comparing the results of the two pairings came from MIT-BIH Arrhythmia Database that is found on PhysioNet while the non-ECG signals came from another database which is related to stress recognition. ECG signal analysis in this study comprises three stages: the acquisition of signal from database, the feature extraction and the classification for determining the signal. In this study, SVM using the kernel function Radial Basis Function (RBF) paired with the mother wavelet Daubechies proved to be better than ANFIS paired with Haar mother wavelet.

This paper investigates the application of the newly proposed Kronecker-based method for the reconstruction of compressively sensed electrocardiogram (ECG) signals. By applying the Kronecker-based method, ECG signal acquisition is done in smaller lengths. Collection of smaller length of ECG signals leads to fewer arithmetic operations during the compression phase. Instead of recovering individually in smaller lengths, recovery is done over several concatenated segments. This newly proposed recovery method improves the quality of the reconstructed signal when compared to the traditional recovery done without concatenation. Two random measurement matrices, namely the Gaussian and the Bernoulli matrices, are considered as sensing matrices in this study and the methodology is evaluated using 10 ECG signals acquired from the MIT arrhythmia database. The random Bernoulli matrix is found to provide better quality of recovered compressed ECG signal even with the traditional compressive recovery techniques. Recovery by the newly proposed Kroneckerbased method results in higher SNR in all the ECG signals when the compression ratio (CR) is 25% or 50% and when the CR is 75%, improvement is observed in majority of the ECG signals. Lower CRs provide better reconstruction than higher CRs. The Kronecker-based recovery method may be useful for wearable ECG devices.

The article is devoted to the application of machine learning methods for computerized detection of sleep apnea episodes based on the analysis of single-channel signals of the electrocardiogram (ECG) and electroencephalogram (EEG). To study the possibilities of machine learning to detect apnea based on ECG and EEG analysis, we used Apnea-ECG database and MIT-BIH polysomnographic database from PhysioNet, which contain annotations to each minute of records indicating the presence or absence of apnea/hypopnea at the current time. In order to apply machine learning methods to the problem of automated detection of sleep apnea/hypopnea episodes in ECG and EEG signals, long-term polysomnograms available in MIT-BIH polysomnographic database were segmented according to annotations into shorter sections lasting 30 seconds each. The study used 267 segments lasting 30 seconds for the class "norm", 258 segments for the class "apnea" and 273 segments for the class "hypopnea", a total of 798 simultaneous ECG and EEG recordings. The aim of this work is to identify and compare informative signs of sleep apnea episodes in terms of heart rate variability (HRV) and brain electrical activity, as well as the choice of classification methods that provide the highest accuracy for this task. Features of cardiorhythmograms in time and frequency domains, spectral-temporal and wavelet characteristics, as well as parameters of EEG signals based on energy ratio of EEG rhythms, Hearst index, Higuchi fractal dimension and sample entropy for EEG signals are considered. Using different sets of features, the accuracy of classifiers based on decision trees, discriminant analysis, support vector machines, k-nearest neighbor method, and ensemble training was determined. Based on this, combination of features and classifiers is proposed, which provides the highest accuracy of recognition of sleep apnea episodes according to single-channel ECG and EEG signals, taken separately and in the case of a combination of their features. The best results of classification of signals "norm", "apnea" and "hypopnea" were obtained for the model trained using weighted method k nearest neighbors with 25 features of HRV: the total percentage of correctly identified cases for three classes was 99.9% (797 correctly identified cases of 798). By reducing the number of HRV parameters to 9, the best machine learning result was achieved using the bagging ensemble algorithm with 30 decision trees: the total percentage of correctly identified cases for all three classes was 99.4% (793 correctly identified cases from 798: for "norm" - 265 cases from 267, for "apnea" - 257 cases from 258, for "hypopnea" - 271 cases from 273). The use of EEG parameters as features for apnea/hypopnea recognition showed worse results compared to HRV parameters. In this case, the best result of machine learning was achieved using support vector machines with quadratic kernel function: the total percentage of correctly identified cases for three classes was 91.9% and the signals corresponding to norm were most badly recognized (27 cases were classified as hypopnea, and in 9 cases - as sleep apnea). The combination of HRV and EEG parameters gave the best accuracy of 99.1%, but the results are comparable to using only HRV parameters. The obtained results indicate that HRV parameters allow recognizing sleep apnea and hypopnea with higher accuracy than EEG parameters, but EEG signal undoubtedly reflects signs of sleep apnea/hypopnea and also can be used for apnea recognition.

Electrocardiogram (ECG) signal processing aims basically 1) at artifact reduction to make the ECG signals cleaner and better interpretable by human or machine observers, 2) at revealing aspects not immediately observable in plain measured ECG signals even after artifact reduction, or 3) at diagnostics decision support and automated ECG signal interpretation, including classification of ECG signals into different classes associated with normal or pathological heart function. Thus, sports related applications aside, body surface ECG signal processing aims at enhancing ECG based diagnostics. In this Chapter, we review and demonstrate a statistical signal processing approach, independent component analysis (ICA), which is inherently very suitable for ECG signal processing regarding the aims 1) and 2) above, and also equally applicable as a component in systems aimed at accomplishing the aim 3). For more on general ECG signal processing, the reader is directed to the textbook written by Sornmo & Laguna (2005), and for a thorough treatment of ICA to the Hyvarinen’s book (Hyvarinen et al., 2001). A concise review on ICA in ECG signal processing has been presented by Castells et al. (2007a). In this Chapter, we describe and illustrate several widely adopted applications of ICA in ECG signal processing, and discuss associated practical aspects, some of which are not generally found in the literature. The treatment of the matter is aimed at conceptual and practical understanding, leaving the mathematical derivations and proofs far mostly for the interested reader to find in the references. ICA (Castells et al., 2007a; Comon, 1994; Hyvarinen et al., 2001; Hyvarinen & Oja, 2000; Naik & Kumar, 2011) is a statistical signal processing method for decomposing a set of signals into a set of mutually independent component signals. In general, in the applications of ICA, including in ECG signal processing, the objective is that the resulting independent component signals are the original source signals. Since ICA operates purely based on the input signals and a few assumptions, ICA belongs to the class of methods called blind source separation methods. For ICA, a source signal is called an independent component (IC). The terms ‘IC’ and ‘source signal’ are here used interchangeably. For ECG, the source signals are the bioelectrical signals generated by the heart, and all the possible artifact signals. Generally, ICA input signals are the observed signals, which may be measurement time series, such as sampled voltage values in time as in the case of ECGs, image pixel values, or basically any sets of values fulfilling the assumptions of ICA. In the sequel, the term

Due to the capacity of processing signal with low energy consumption, compressive sensing (CS) has been widely used in wearable health monitoring system for arrhythmia classification of electrocardiogram (ECG) signals. However, most existing works focus on compressive sensing reconstruction, in other words, the ECG signals must be reconstructed before use. Hence, these methods have high computational complexity. In this paper, the authors propose a cardiac arrhythmia classification scheme that performs classification task directly in the compressed domain, skipping the reconstruction stage. The proposed scheme first employs the Pan–Tompkins algorithm to preprocess the ECG signals, including denoising and QRS detection, and then compresses the ECG signals by CS to obtain the compressive measurements. The features are extracted directly from these measurements based on principal component analysis (PCA), and are used to classify the ECG signals into different types by the proposed semi-supervised learning algorithm based on support vector machine (SVM). Extensive simulations have been performed to validate the effectiveness of the proposed scheme. Experimental results have shown that the proposed scheme achieves an average accuracy of [Formula: see text] at a sensing rate of 0.7, compared to an accuracy of [Formula: see text] for noncompressive ECG data.

PurposeSurface electromyography (sEMG) is vulnerable to environmental interference, low recognition rate and poor stability. Electrocardiogram (ECG) signals with rich information were introduced into sEMG to improve the recognition rate of fatigue assessment in the process of rehabilitation.MethodsTwenty subjects performed 150 min of Pilates rehabilitation exercise. Twenty subjects performed 150 min of Pilates rehabilitation exercise. ECG and sEMG signals were collected at the same time. Aftering necessary preprocessing, the classification model of improved particle swarm optimization support vector machine base on sEMG and ECG data fusion was established to identify three different fatigue states (Relaxed, Transition, Tired). The model effects of different classification algorithms (BPNN, KNN, LDA) and different fused data types were compared.ResultsIPSO-SVM had obvious advantages in the classification effect of sEMG and ECG signals, the average recognition rate was 87.83%. The recognition rates of sEMG and ECG fusion feature classification models were 94.25%, 92.25%, 94.25%. The recognition accuracy and model performance was significantly improved.ConclusionThe sEMG and ECG signal after feature fusion form a complementary mechanism. At the same time, IPOS-SVM can accurately detect the fatigue state in the process of Pilates rehabilitation. On the same model, the recognition effect of fusion of sEMG and ECG(Relaxed: 98.75%, Transition:92.25%, Tired:94.25%) is better than that of only using sEMG signal or ECGsignal. This study establishes technical support for establishing relevant man–machine devices and improving the safety of Pilates rehabilitation.

PO-04-175 RECONSTRUCTING TWELVE-LEAD ELECTROCARDIOGRAM SIGNALS FROM A SINGLE-LEAD SIGNAL USING GENERATIVE ADVERSARIAL NETWORKS

Automatic detection and classification of electrocardiogram (ECG) signals is of great importance for diagnosis of cardiac abnormalities. A method is proposed here to classify different cardiac abnormalities like Cardiomyopathy, Myocardial infarction, Dysrhythmia, Myocardial hypertrophy and Valvular heart disease. Support Vector Machine (SVM) has been used to classify the patterns inherent in the features extracted through Continuous Wavelet Transform (CWT) of different ECG signals. CWT allows a time domain signal to be transformed into time-frequency domain such that frequency characteristics and the location of particular features in a time series may be highlighted simultaneously. Thus it allows accurate extraction of feature from non-stationary signals like ECG. SVM transforms the multi-dimensional feature space into a linearly separable feature space with the help of Kernel function. In the present work, SVM in regression mode has been successfully applied for the classification of cardiac abnormalities with good diagnostic accuracy.

Early detection of unusual heart conditions is of vital importance to recognize heart disappointment and maintain a strategic distance from unexpected death. The humans with similar heart conditions have been practically identical using electrocardiogram (ECG) signals. By reviewing the ECG signal models, one can anticipate heart disease. Since the standard techniques for heart disease disclosure depend upon securing morphological features of the ECG signals, which are repetitious and tedious, the customized recognizable proof of cardiovascular disease is progressively perfect. Subsequently, in order to have the programmed identification of heart diseases, a satisfactory strategy is required. This could arrange the ECG signals with dark features as appeared by the similitudes among them and the ECG signals with known features. If this classifier can discover the similitudes, the likelihood of cardiovascular disease disclosure is broadened. This count can change into a significant procedure in research facilities during this examination work. Another classification technique is brought into the system. The Asymmetric Back Propagation Neural Network classification methodology, which all the more precisely orders ECG signals that rely upon a powerful model of the Electrocardiogram (ECG) signal classification. With this proposed method, a convolutional gated recurrent neural network is constructed, and its simulation results show that this classification can partition the ECG with 98.5% accuracy.

Fetal Electrocardiogram (ECG) signal extraction from non-invasive abdominal ECG signal is one of the important clinical practices followed to observe the fetal health state. Information about heart growth and health conditions of a fetus can be observed from fetal ECG signals. However, acquiring fetal ECG from abdominal ECG signals is still considered as a challenging task in biomedical analysis. This is mainly due to corrupted high amplitude maternal ECG signals, low signal to noise ratio of fetal ECG signal, difficulties in reduction of QRS (Q wave, R wave, S wave) complexities, fetal ECG signal superimposed characteristics, other motion, and electromyography artifacts. To reduce these conventional challenges, in fetal ECG analysis of a novel Conditional Generative adversarial network (CGAN) is introduced in this research work to extract the fetal ECG signal. The proposed classification model was classified efficiently in fetal ECG signals from non-invasive abdominal ECG signals. The experimental analysis demonstrates that the proposed network model provides better results in terms of sensitivity, specificity, and accuracy compared to the conventional fetal ECG extraction models like singular value decomposition, periodic component analysis, and Adaptive neuro-fuzzy inference system.