Probabilistic State-Based RT-Analysis of SDFGs on MPSoCs with Shared Memory Communication

Real-time control systems must adequately react to changes in system state within a time limit determined by the dynamics of the controlled system, otherwise their stability might be compromised. It is therefore essential to determine the Worst-Case Execution Time (WCET) of the control algorithms to verify that they will always be able to satisfy that constraint. However, WCET analysis is a complex process, requiring manual intervention, and the computed bounds are often grossly overestimated. We avoid the difficulties of WCET estimation by making use of the single-path paradigm for the implementation of the control algorithm for a quadcopter. By using single-path code we do not only replace the cumbersome WCET analysis with a single measurement, we simultaneously avoid the detrimental effects of response-time variability. We show that single-path code can be applied to real-time controllers and that it is practical for dramatically simplifying WCET analysis as well as eliminating variability in the execution time. Our results show that despite its apparent inefficiency, the WCET of single-path code on a time-predictable soft microprocessor rivals that of a state-of-the-art superscalar processor.

The schedulability analysis of real-time embedded systems requires worst case execution time (WCET) analysis for the individual tasks. Bounding WCET involves not only language-level program path analysis, but also modeling the performance impact of complex micro-architectural features present in modern processors. In this paper, we statically analyze the execution time of embedded software on processors with speculative execution. The speculation of conditional branch outcomes (branch prediction) significantly improves a program's execution time. Thus, accurate modeling of control speculation is important for calculating tight WCET estimates. We present a parameterized framework to model the different branch prediction schemes. We further consider the complex interaction between speculative execution and instruction cache performance, that is, the fact that speculatively executed blocks can generate additional cache hits/misses. We extend our modeling to capture this effect of branch prediction on cache performance. Starting with the control flow graph of a program, our technique uses integer linear programming to estimate the program's WCET. The accuracy of our method is demonstrated by tight estimates obtained on realistic benchmarks.

An accurate and safe estimation of a task's worst case execution time (WCET) is crucial for reasoning about the timing properties of real-time systems. In RISC processors, the execution time of a program construct (e.g., a statement) is affected by various factors such as cache hits/misses and pipeline hazards, and these factors impose serious problems in analyzing the WCETs of tasks. To analyze the timing effects of RISC's pipelined execution and cache memory, this paper proposes extensions of the original timing schema (Shaw, 1989) where the timing information associated with each program construct is a simple time-bound. We associate with each program construct what we call a WCTA (Worst Case Timing Abstraction), which contains detailed timing information of every execution path that might be the worst case execution path of the program construct. This extension leads to a revised timing schema that is similar to the original timing schema except that concatenation and pruning operations on WCTAs are newly defined to replace the add and max operations on time-bounds in the original timing schema. Our revised timing schema accurately accounts for the timing effects of pipelined execution and cache memory not only within but also across program constructs. This paper also reports on preliminary results of WCET analyses for a pipelined processor. Our results show that up to 50% tighter WCET bounds can be obtained by using the revised timing schema. >

Worst case execution time (WCET) analysis is essential for exposing timeliness defects when developing hard real-time systems. However, it is too late to fix timeliness defects cheaply since developers generally perform WCET analysis in a final verification phase. To help developers quickly identify real timeliness defects in an early programming phase, a novel interactive WCET prediction with warning for timeout risk is proposed. The novelty is that the approach not only fast estimates WCET based on a control flow tree (CFT), but also assesses the estimated WCET with a trusted level by a lightweight false path analysis. According to the trusted levels, corresponding warnings will be triggered once the estimated WCET exceeds a preset safe threshold. Hence developers can identify real timeliness defects more timely and efficiently. To this end, we first analyze the reasons of the overestimation of CFT-based WCET calculation; then we propose a trusted level model of timeout risks; for recognizing the structural patterns of timeout risks, we develop a risk data counting algorithm; and we also give some tactics for applying our approach more effectively. Experimental results show that our approach has almost the same running speed compared with the fast and interactive WCET analysis, but it saves more time in identifying real timeliness defects.

Most previous research done in probabilistic schedulability analysis assumes a known distribution of execution times for each task of a real-time application. This is however not trivial to determine it with a high level of confidence. Methods based on measurements are often biased since not in general exhaustive on all the possible execution paths, whereas methods based on static analysis are mostly worst-case execution time - WCET-oriented. Using static analysis, this work proposes a method to obtain probabilistic distributions of execution times. It assumes that the given real time application is divided into multiple tasks, whose source code is known. Ignoring in this paper hardware considerations and based only on the source code of the tasks, the proposed technique allows designers to associate to any execution path an execution time and a probability to go through this path. A source code example is presented to illustrate the method.

Estimating Worst-Case Execution Time (WCET) is of utmost importance for developing Cyber-Physical and Safety-Critical Systems. The system’s scheduler uses the estimated WCET to schedule each task of these systems, and failure may lead to catastrophic events. It is thus imperative to build provably reliable systems. WCET is available to us in the last stage of systems development when the hardware is available and the application code is compiled on it. Different methodologies measure the WCET, but none of them give early insights on WCET, which is crucial for system development. If the system designers overestimate WCET in the early stage, then it would lead to the overqualified system, which will increase the cost of the final product, and if they underestimate WCET in the early-stage, then it would lead to financial loss as the system would not perform as expected.This paper estimates early WCET using Deep Neural Networks as an approximate predictor model for hardware architecture and compiler. This model predicts the WCET based on the source code without compiling and running on the hardware architecture. Our WCET prediction model is created using the Pytorch framework. The resulting WCET is too erroneous to be used as an upper bound on the WCET. However, getting these results in the early stages of system development is an essential prerequisite for the system’s dimensioning and configuration of the hardware setup.

Under certain conditions, the worst-case execution time (WCET) of a function can be found by measuring the effective execution time for each feasible execution path. Automatic generation of test inputs can help make this approach more feasible. To reduce the number of tests, we define two partial orders on the execution paths of the program under test. Under further conditions, these partial orders represent the relation between the execution times of the paths. We explain how we modified the strategy of the PathCrawler structural test-case generation tool to generate as few tests as possible for paths which are not maximal in these partial orders, whilst ensuring that the WCET is exhibited by at least one case in the set. The techniques used could also serve in the implementation of other test generation strategies which have nothing to do with WCET.

To predict the worst case execution time (WCET) of real-time tasks, we should consider various factors (e.g., caching, pipelining, and infeasible paths) that affect the accuracy of the prediction. However some of them are inherently difficult to analyze statically, and thus may give rise to significant overestimation in WCET prediction. Therefore, for more accurate WCET prediction, we need to identify, such overestimation sources and analyze how much each of them can make overestimation. Then, such analysis results can be used to refine existing timing analysis techniques. In this paper we do not propose any new timing analysis techniques, but present quantitative analysis results on the impacts of overestimation sources on the accuracy of the worst case timing analysis. For this purpose, we use variance analysis based on a simulation-based methodology to make our analysis independent of any existing techniques. The results show that the dominant factor is pipelining analysis when the cache miss penalty is small and instruction caching analysis when the cache miss penalty is larger than 10 cycles. The results also show that although the impact of data caching analysis is small compared with that of pipelining or instruction caching analysis, if we ignore its effect in the WCET estimation, the WCET can be overestimated up to 275% even when the effects of the other factors are completely analyzed. Finally, the results show that the effects of infeasible paths are largely orthogonal to other analysis features and depend on program characteristics. Also, as for data caching, if infeasible paths are ignored in the WCET estimation, the accuracy of the WCET estimation is degraded significantly (up to 564%).

The determination of the execution time upper bound, commonly called Worst-Case Execution Time (WCET), is a necessary step in the development and validation process for real-time systems.The WCET analysis techniques can be classified as static or dynamic.While a high-level language code suffices for the static techniques, for a precise WCET analysis a target architecture or its authentic simulator able to run the final machine-level code of an analyzed application is needed by the dynamic techniques.In the paper, we have decided not only to present a novel hybrid timing analysis technique, but also to show its practical applicability in the area of WCET analysis over particular embedded architecture (MSP430) and real-time operating system (FreeRTOS).Novelty of the presented method can be seen in the fact the operating system model is reflected during the analysis in order to facilitate the process of derivating schedulability test formulas, create detail task/stack analysis etc. Applicability of the method was tested using the MSPsim simulator of the MSP430 architecture.

This paper presents techniques to integrate worst-case execution time (WCET) data into a compiler. Currently, a tight integration of WCET into compilers is strongly desired, but only some ad-hoc approaches were reported currently. Previous work mainly used self-written WCET estimators with limited functionality and preciseness during compilation. A very tight integration of a high quality WCET analyzer into a compiler was not yet achieved. This work is the first to present such a tight coupling between a compiler and the WCET analyzer aiT. This is done by automatically translating the assembly-like contents of the compiler's low-level format (LLIR) to aiT's exchange format CRL2. Additionally, the results produced by aiT are automatically collected and re-imported into the compiler infrastructure. The work described in this paper is smoothly integrated into a C compiler for the Infineon TriCore processor. It opens up new possibilities for the design of WCET-aware optimizations in the future. The concepts for extending the compiler structure are kept very general so that they are not limited to WCET information. Rather, it is possible to use our concepts also for multi-objective optimization of e. g. best-case execution time (BCET) or energy dissipation

Genetic algorithm based estimation of non–functional properties for GPGPU programs

Timing is a key non-functional property in embedded real-time systems (ERTS). ERTS increasingly require higher levels of performance that can only be sensibly provided by deploying high-performance hardware, which however complicates timing analysis. Measurement-Based Probabilistic Timing Analysis (MBPTA) aims at analysing the timing behaviour of ERTS deploying complex hardware features such as caches. A key parameter for MBPTA to provide reliable results is the number of runs to perform to ensure probabilistic representativeness of the execution time measurements taken at analysis time with respect to execution times that can occur during system operation. In this paper, focusing on the cache — acknowledged as one of the most complex resources to time analyse — we address the problem of determining whether the number of observations taken at analysis, as part of the normal MBPTA application process, captures the cache events significantly impacting execution time and Worst-Case Execution Time (WCET). If this is not the case, our techniques provide the user with the number of extra runs to perform to guarantee that those cache events are captured ensuring confidence on provided WCET estimates.

Evaluation of Level of Confidence and Optimization of Roll-back Recovery with Checkpointing for Real-Time Systems

In this article we give an overview of the worst-case execution time (WCET) analysis research performed by the WCET group of the ASTEC Competence Centre at Uppsala University. Knowing the WCET of a program is necessary when designing and verifying real-time systems. The WCET depends both on the program flow, such as loop iterations and function calls, and on hardware factors, such as caches and pipelines. WCET estimates should be both safe (no underestimation allowed) and tight (as little overestimation as possible). We have defined a modular architecture for a WCET tool, used both to identify the components of the overall WCET analysis problem, and as a starting point for the development of a WCET tool prototype. Within this framework we have proposed solutions to several key problems in WCET analysis, including representation and analysis of the control flow of programs, modeling of the behavior and timing of pipelines and other low-level timing aspects, integration of control flow information and low-level timing to obtain a safe and tight WCET estimate, and validation of our tools and methods. We have focussed on the needs of embedded real-time systems in designing our tools and directing our research. Our long-term goal is to provide WCET analysis as a part of the standard tool chain for embedded development (together with compilers, debuggers, and simulators). This is facilitated by our cooperation with the embedded systems programming-tools vendor IAR Systems.

Scenario-Aware Data-Flow Graphs (SADFGs) were introduced to capture the behavior of embedded applications achieving a good trade-off between expressiveness and analyzability. On the one side, they support the timing analysis of real-time applications, especially those running on MPSoCs, due to the clean separation of computation and communication phases in their executing nodes. On the other side, SADFGs allow the expression of a more dynamic behaviors than Synchronous dataflow graphs by allowing dynamic token-rates of single nodes depending on pre-defined typical scenarios. The fact which leads to more efficiency and better throughput.In this paper, we describe the extension of a previous model-checking based real-time analysis approach to allow the analysis of timing bounds for FSM-SADFGs mapped on a shared memory multiprocessor architecture. We demonstrate our approach on an MPEG decoder application being viable to obtain the worst-case end-to-end latency of its implementation under different scenarios on a 2-tiles MPSoC.